The synthesis of thiol‐functionalized long‐chain highly branched polymers (LCHBPs) has been accomplished in combination of ring‐opening metathesis polymerization (ROMP) and thiol‐Michael addition click reaction. A monotelechelic polymer with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as an ABn‐type macromonomer in subsequent thiol‐ene reaction between acrylate and thiol, yielding LCHBPs as the reaction time prolonged. Au nanoparticles are then covalently conjugated onto the surface of thiol‐functionalized LCHBP to fabricate novel hybrid nanostructures, which is shown as one interesting application of such functionalized metathesis polymers. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities.
A thiofunctional thiazolidine is introduced as a new low‐molar‐mass building block for the introduction of cysteine residues via a thiol‐ene reaction. Allyl‐functional polyglycidol (PG) is used as a model polymer to demonstrate polymer‐analogue functionalization through reaction with the unsaturated side‐chains. A modified trinitrobenzenesulfonic acid (TNBSA) assay is used for the redox‐insensitive quantification and a precise final cysteine content can be predetermined at the polymerization stage. Native chemical ligation at cysteine‐functional PG is performed as a model reaction for a chemoselective peptide modification of this polymer. The three‐step synthesis of the thiofunctional thiazolidine reactant, together with the standard thiol‐ene coupling and the robust quantification assay, broadens the toolbox for thiol‐ene chemistry and offers a generic and straightforward approach to cysteine‐functional materials.
Five different poly(arylene‐diarylvinylene)s have been synthesized by reductive polyolefination starting from the corresponding bis(α,α‐dichlorobenzyl)‐substituted monomers and dicobaltoctacarbonyl as reducing agent. The resulting polymers all contain main chain tetraphenylethylene units. Thanks to the aggregation‐induced emission effect, the corresponding polymer films show remarkably high photoluminescence quantum yields (PLQYs) of 32%–73%. The polymer with the highest PLQY is tested as solid state sensing material for the PL‐quenching‐based detection of nitroaromatic analytes (1,3,5‐trinitrobenzene as prototypical analyte).
A simple strategy is provided to construct a novel pH‐ and sugar‐induced shape memory hydrogel based on dynamic phenylboronic acid (PBA)–diol interactions formed by PBA‐modified sodium alginate (Alg‐PBA) and poly(vinyl alcohol) (PVA). The dynamic PBA–diol ester bonds serve as temporary cross‐links and stabilize the deformed shape of the hydrogel. The disassociation of the PBA–diol ester bonds is explored in acidic conditions and aqueous solutions of glucose and fructose, which endow the hydrogel with shape memory performances.
Synthesis of a cyclodextrin (CD) polyrotaxane is achieved for the first time by simultaneous free radical polymerization of isoprene, threading by CD, and stoppering by copolymerization of styrene. This reaction is performed in an eco‐friendly manner in an aqueous medium similar to classical emulsion polymerization. Threaded CD rings of the polyrotaxane are cross‐linked by hexamethylene diisocyanate, leading to highly elastic slide‐ring gels.
High‐molecular‐weight conjugated polymer HD‐PDFC‐DTBT with N‐(2‐hexyldecyl)‐3,6‐difluorocarbazole as the donor unit, 5,6‐bis(octyloxy)benzothiadiazole as the acceptor unit, and thiophene as the spacer is synthesized by Suzuki polycondensation. HD‐PDFC‐DTBT shows a large bandgap of 1.96 eV and a high hole mobility of 0.16 cm2 V−1 s−1. HD‐PDFC‐DTBT:PC71BM‐based inverted polymer solar cells (PSCs) give a power conversion efficiency (PCE) of 7.39% with a Voc of 0.93 V, a Jsc of 14.11 mA cm−2, and an FF of 0.56.
Cross‐linked silicone elastomers constructed with dynamic‐covalent boronic esters are first synthesized by photoinitiated radical thiol−ene “click” chemistry. The resultant samples can be cut with a sharp knife into two pieces and then healed via the reversibility of the boronic ester cross‐linkages to restore the original silicone sample within 30 min. Regulation of luminescent properties is achieved by incorporating organic dye into the elastomers through a “one‐pot” thiol–ene reaction. The proposed synthesis procedure demonstrates a new strategy to produce boronic acid silicone materials capable of self‐healing without external forces.
A powerful variation of traditional radical thiol‐yne reaction with diphenylacetylene (DPA)‐based starting materials leading to the quantitative and selective formation of the corresponding vinyl sulfides is reported. A variety of different thiols are shown to undergo reaction with DPA and the influence of their structure on reactivity is studied. The results obtained from the model reactions are then used to guide the efficient synthesis of hyperbranched poly(vinyl sulfide) (hb‐PVS) systems by employing a dithiol and a trialkyne in an A2 + B3 approach. The polymers obtained show excellent solubility in common organic solvents and exhibit high refractive indices (e.g., 1.70 at 589 nm). The combined ease of processability and potential for cross‐linking make these materials very interesting for applications, such as coatings for optical devices. The selective mono‐addition thiol‐yne reaction on DPA serves not only as a synthetic method for the preparation of PVS but could also be applied to the general modification of acetylene‐containing materials.
The present review focuses on the recent progress made in thin film orientation of semi‐conducting polymers with particular emphasis on methods using epitaxy and shear forces. The main results reported in this review deal with regioregular poly(3‐alkylthiophene)s and poly(dialkylfluorenes). Correlations existing between processing conditions, macromolecular parameters and the resulting structures formed in thin films are underlined. It is shown that epitaxial orientation of semi‐conducting polymers can generate a large palette of semi‐crystalline and nanostructured morphologies by a subtle choice of the orienting substrates and growth conditions.
The self‐assembled nanostructures of a high‐molecular‐weight rod–coil block copolymer, poly(styrene‐block‐(2,5‐bis[4‐methoxyphenyl]oxycarbonyl)styrene) (PS‐b‐PMPCS), in p‐xylene are studied. The cylindrical micelles, long segmental cylindrical micelle associates, spherical micelles, and spherical micelle associates are observed with increased copolymer concentration. The high molecular weight of PS leads to the entanglement between PS chains from different micelles, which is the force for supramolecular interactions. Short cylindrical micelles are connected end‐to‐end via this supramolecular chemistry to form long segmental cylindrical micelle associates, analogue to the condensation polymerization process, with direction and saturation. On the other hand, spherical micelles assemble via supramolecular chemistry to form spherical micelle associates, yet without any direction due to their isotropic properties.
Several pyrene‐based polyphenylene dendrimers (PYPPDs) with different peripheral chromophores (PCs) are synthesized and characterized. Deep blue emissions solely from the core are observed for all of them in photoluminescence spectra due to good steric shielding of the core and highly efficient surface‐to‐core Förster resonant energy transfers (FRETs). Device performances are found in good correlation with the energy gaps between the work function of the electrodes and the frontier molecular orbital (FMO) levels of the PCs. Pure blue emission, luminance as high as 3700 cd m−2 with Commission Internationale de l'Éclairage 1931 (CIExy) = (0.16, 0.21), and a peak current efficiency of 0.52 cd A−1 at CIExy = (0.17, 0.20) are achieved. These dendrimers are among the best dendritic systems so far for fluorescent blue light‐emitting materials.
The termination mechanism of the radical polymerization of acrylates, namely the selectivity of disproportionation (Disp) and combination (Comb) between polymer end radicals, is unambiguously determined by the reaction of polyacrylate end radicals generated from corresponding “living” organotellurium ω‐end polymer. While textbooks describe the occurrence of Comb, the reaction at 25 °C exclusively gives the Disp products. Ab initio molecular dynamics suggests that the products form by two pathways: The direct disproportionation reaction and a novel stepwise process that involves the initial formation of the C–O coupling product followed by intramolecular rearrangement. The termination at high temperature and low radical concentration increases the contribution of back‐biting reaction giving mid‐chain radicals, and complex reaction pathways of the mid‐chain radicals are clarified for the first time.
Cyclic multiblock polymers with high‐order blocks are synthesized via the combination of single‐electron transfer living radical polymerization (SET‐LRP) and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The linear α,ω‐telechelic multiblock copolymer is prepared via SET‐LRP by sequential addition of different monomers. The SET‐LRP approach allows well control of the block length and sequence as A‐B‐C‐D‐E, etc. The CuAAC is then performed to intramolecularly couple the azide and alkyne end groups of the linear copolymer and produce the corresponding cyclic copolymer. The block sequence and the cyclic topology of the resultant cyclic copolymer are confirmed by the characterization of 1H nuclear magnetic resonance spectroscopy, gel permeation chromatography, Fourier transform infrared spectroscopy, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry.
Thermomechanical properties of neat phosphine‐catalyzed thiol‐Michael networks fabricated in a controlled manner are reported, and a comparison between thiol‐acrylate and thiol‐vinyl sulfone step‐growth networks is performed. When highly reactive vinyl sulfone monomers are used as Michael acceptors, glassy polymer networks are obtained with glass transition temperatures ranging from 30 to 80 °C. Also, the effect of side‐chain functionality on the mechanical properties of thiol‐vinyl sulfone networks is investigated. It is found that the inclusion of thiourethane functionalities, aryl structures, and most importantly the elimination of interchain ester linkages in the networks significantly elevate the network's glass transition temperature as compared with neat ester‐based thiol‐Michael networks.
To enhance the limited degradability of poly(ethylene glycol) (PEG), a straightforward method of synthesizing poly[(ethylene glycol)‐co‐(glycolic acid)] (P(EG‐co‐GA)) via a ruthenium‐catalyzed, post‐polymerization oxyfunctionalization of various PEGs is developed. Using this method, a set of copolymers with GA compositions of up to 8 mol% are prepared with minimal reduction in molecular weight (<10%) when compared to their commercially available starting materials. The P(EG‐co‐GA) copolymers are shown to undergo hydrolysis under mild conditions.
A novel and robust route for the synthesis of a new amphiphilic brush copolymer, poly(glycidyl methacrylate)‐graft‐polyethylene glycol (PGMA‐g‐PEG), with high grafting densities of 97%–98% through a “grafting onto” method via carbon dioxide chemistry is reported. PGMA‐g‐PEG can self‐assemble and form stable spherical core–shell micelles in aqueous solution. Besides, the obtained PGMA‐g‐PEG polymer contains hydroxyurethane structures as the junction sites between the PGMA backbone and PEG side chain, which can be used for further modification.
In this work, a cocatalytic effect between Meldrum's acid (MA) and benzoxazine (Bz) compounds has been explored to build up a self‐promoting curing system. Consequently, the MA/Bz reactive blend exhibits a relatively low reaction temperature compared to the required temperatures for the cross‐linking reactions of the pure MA and Bz components. This feature is attractive for energy‐saving processing issues. Moreover, the thermosetting resins based on the MA/Bz reactive blends have been prepared. The MA component can generate additional free volume in the resulting resins, so as to trap air in the resin matrix and consequently to bring low dielectric constants to the resins. The MA‐containing agent is an effective modifier for benzoxazine resins to reduce their dielectric constants.
Recently, extensive investigations are carried out on design of highly controlled architecture and morphology by polymerizing the monomers doped in well‐defined liquid crystalline materials, followed by removal of the template liquid crystal molecules. In this communication, a photonic structure used as a new photonic bandgap (PBG) material is developed by imprinting helical structures on polymer matrices through multiple photocrosslinking processes in an induced chiral nematic mesophase using flexible polyethylene terephthalate (PET) films as substrates. The tuning properties of the reflection band of the imprinted cell are achieved using an uniaxial thermo‐stretching equipment. Furthermore, refilling of isotropic materials into the imprinted cells tune the reflection light wavelength leads to the change of color.
A photocleavable terpolymer hydrogel cross‐linked with o‐nitrobenzyl derivative cross‐linker is shown to be capable of self‐shaping without losing its physical integrity and robustness due to spontaneous asymmetric swelling of network caused by UV‐light‐induced gradient cleavage of chemical cross‐linkages. The continuum model and finite element method are used to elucidate the curling mechanism underlying. Remarkably, based on the self‐changing principle, the photosensitive hydrogels can be developed as photoprinting soft and wet platforms onto which specific 3D characters and images are faithfully duplicated in macro/microscale without contact by UV light irradiation under the cover of customized photomasks. Importantly, a quick response (QR) code is accurately printed on the photoactive hydrogel for the first time. Scanning QR code with a smartphone can quickly connect to a web page. This photoactive hydrogel is promising to be a new printing or recording material.
In this article, a synthetic concept for the preparation of polyamides with functional side groups is described. First, the synthesis of a bis(thiolactone) monomer is shown in a concise three‐step route from itaconic acid and DL‐homocysteine thiolactone. The reactivity of the resulting bis(thiolactone) toward hexyl amine is examined. Next, the bis(thiolactone) is reacted as A,A‐type monomer with different B,B‐type comonomers (1,12‐diaminododecane and 1,3‐bis(aminopropyl)tetramethyldisiloxane). Ring opening of the thiolactones by the diamines leads to polyamides with pendant thiol groups. Using two diamines in different ratios, the properties of the resulting polyamides are tuned (thermal properties are determined) and different molecular weights are acquired. Subsequently, the thiol groups are reacted with methyl acrylate via Michael addition to functionalize the polyamides. Functionalization of thiol‐functional polyamides using poly(ethylene glycol) monomethyl ether (mPEG) acrylates ( = 480 and 1700 g mol−1) results in water‐soluble amphiphilic polyamides with molecular weights higher than 10 000 g mol−1.
