Densities,excess molar volumes,and refractive indices of 1,1,2,2-tetrabromoethane and 1-alkanols binary mixtures

Densities, excess molar volumes, refractive indices, and changes in refractive index on mixing for (1,1,2,2-tetrabromoethane + 1-pentanol, or 1-hexanol, or 1-heptanol, or 1-octanol, or 1-decanol) have been determined at T = 293.15 K and at T = 303.15 K. The excess molar volumes and changes in refractive index have been fitted to Redlich–Kister polynomials. The effect of the chain length of the 1-alkanol on the excess molar volume and the change in the refractive index of its mixtures with 1,1,2,2-tetrabromoethane are discussed. In addition, the refractive indices are compared with calculated values using mixing rules proposed by several authors, and a good agreement is obtained.     

Densities,excess molar volumes,and refractive indices of 1,1,2,2-tetrachloroethane and 1-alkanols binary mixtures

Densities, excess molar volumes, refractive indices, and changes in refractive index on mixing for 1,1,2,2-tetrachloroethane + 1-pentanol, or 1-hexanol, or 1-heptanol, or 1-octanol, or 1-decanol have been determined at T = (293.15 and 303.15) K. The excess molar volumes and changes in refractive index have been fitted to Redlich–Kister polynomials. The effect of the chain length of the 1-alkanol on the excess molar volume and the change in the refractive index of its mixtures with 1,1,2,2-tetrachloroethane was discussed. In addition, the refractive indices were compared with calculated values using mixing rules proposed by several authors, and a very good agreement was obtained.     

Isothermal (vapour + liquid) equilibrium and thermophysical properties for (1-butyl-3-methylimidazolium iodide + 1-butanol) binary system

Experimental isothermal (vapour + liquid) equilibrium (VLE) data are reported for the binary mixture containing 1-butyl-3-methylimidazolium iodide ([bmim]I) + 1-butanol at three temperatures: (353.15, 363.15, and 373.15) K, in the range of 0 to 0.22 liquid mole fraction of [bmim]I. Additionally, refractive index measurements have been performed at three temperatures: (293.15, 298.15 and 308.15) K in the whole composition range. Densities, excess molar volumes, surface tensions and surface tension deviations of the binary mixture were predicted by Lorenz–Lorentz (n_D-ρ) mixing rule. Dielectric permittivities and their deviations were evaluated by known equations. (Vapour + liquid) equilibrium data were correlated with Wilson thermodynamic model while refractive index data with the 3-parameters Redlich–Kister equation by means of maximum likelihood method. For the VLE data, the real vapour phase behaviour by virial equation of state was considered. The studied mixture presents S-shaped abatement from the ideality. Refractive index deviations, surface tension deviations and dielectric permittivity deviations are positive, while excess molar volumes are negative at all temperatures and on whole composition range. The VLE data may be used in separation processes design, and the thermophysical properties as key parameters in specific applications.     

Density,speed of sound,and refractive index measurements for the binary systems (butanoic acid + propanoic acid,or 2-methyl-propanoic acid) at T = (293.15 to 313.15) K

Density, speed of sound, and refractive index for the binary systems (butanoic acid + propanoic acid, or 2-methyl-propanoic acid) were measured over the whole composition range and at T = (293.15, 298.15, 303.15, 308.15, and 313.15) K. The excess molar volumes, isentropic compressibilities, excess isentropic compressibilities, molar refractions, and deviation in refractive indices were also calculated by using the experimental densities, speed of sound, and refractive indices data, respectively. The Redlich–Kister smoothing polynomial equation was used to fit the excess molar volume, excess isentropic compressibility and deviation in refractive index data. The thermodynamic properties have been discussed in terms of intermolecular interactions between the components of the mixtures.     

Mixing properties of binary mixtures presenting azeotropes at several temperatures

Experimental densities, speeds of sound, and refractive indices of the binary mixtures presenting azeotropes of (ethanol with hexane or heptane or 2-butanone) and (2-propanol with 2-butanone or ethylacetate or cyclohexane) were determined from T = (293.15 to 303.15) K. Excess molar volumes, changes of refractive index on mixing and deviations in isentropic compressibility for the above systems were calculated. A function of the mole fraction and temperature polynomial equation was used to fit these quantities. The standard deviations between experimental and calculated values are shown.     

Densities,excess molar volumes,and refractive indices of ethyl acetate and aromatic hydrocarbon binary mixtures

Densities, excess molar volumes, refractive indices, and changes in refractive index on mixing for (ethyl acetate  +  benzene, or methylbenzene, or ethylbenzene, or 1-4-dimethylbenzene, or 1-methylethylbenzene, or 1-3-5-trimethylbenzene, or 1-1-dimethylethylbenzene) have been determined atT =  298.15 K. The excess molar volumes and changes in refractive index have been fitted to Redlich–Kister polynomials. The π -electrons interactions of the benzene ring and the peculiar plate shape of the aromatic molecules are noticeably modified by the presence of the ethyl acetate molecules of a different nature. The intermolecular interactions are strongly modified and result in positive excess volumes except for toluene or p -xylene whose values are close to zero. The refractive indices were compared with calculated values using mixing rules proposed by several authors.     

Thermodynamic properties of mixing for (1-alkanol + an-alkane + a cyclic alkane) atT = 298.15 K. I. (n-Hexane + cyclohexane + 1-butanol)

Experimental values of density, refractive index and speed of sound of (hexane  +  cyclohexane  +  1-butanol) were measured at T =  298.15 K and atmospheric pressure. From the experimental data, the corresponding derived properties (excess molar volumes, changes of refractive index on mixing and changes of isentropic compressibility) were computed. Such derived values were correlated using several polynomial equations. Several empirical methods were used in the calculation of the properties of ternary systems from binary data. The Nitta–Chao group contribution model was applied to predict excess molar volume for this mixture.     

Densities,viscosities, refractive indices,and surface tensions for binary and ternary mixtures of 2-propanol,tetrahydropyran, and 2,2,4-trimethylpentane

Densities, viscosities, refractive indices, and surface tensions of the ternary system (2-propanol + tetrahydropyran + 2,2,4-trimethylpentane) at T = 303.15 K and its constituent binary systems (2-propanol + tetrahydropyran, 2-propanol + 2,2,4-trimethylpentane, and tetrahydropyran + 2,2,4-trimethylpentane) at T = (293.15, 303.15, 313.15, and 323.15) K were measured at atmospheric pressure. Densities were determined using a vibrating-tube densimeter. Viscosities were measured with an automatic microviscometer based on the rolling-ball principle. Refractive indexes were measured using a digital Abbe-type refractometer. Surface tensions were determined by the Wilhelmy-plate method. From these data, excess molar volumes, deviations in viscosity, deviations in refractive index, and deviations in surface tension were calculated. The results for the binary and ternary systems were fitted to the Redlich–Kister equation and the variable-degree polynomials in terms of compositions, respectively. The experimental and calculated quantities are used to study the nature of mixing behaviour between mixture components.     

Properties of ionic liquid HMIMPF6 with carbonates,ketones and alkyl acetates

The densities and refractive indices of the pure ionic liquid (IL) HMIMPF₆ were determined at temperature range from T =(278.15 to 318.15) K for density and from T = (288.15 to 318.15) K for refractive index. The coefficient of thermal expansion of HMIMPF₆ was calculated from the experimental values of density. The densities and refractive indices of binary mixtures involving dimethyl carbonate (DMC), diethyl carbonate (DEC), acetone, 2-butanone, 2-pentanone, methylacetate, ethylacetate, and butylacetate + HMIMPF₆ (1-hexyl-3-methylimidazolium hexafluorophosphate) have been measured at T = 298.15 K and atmospheric pressure. Excess molar volumes and changes of refractive index on mixing for the binary systems were calculated. The miscibility of IL with different organic solvents and (liquid + liquid) equilibrium (LLE) data of binary mixture HMIMPF₆ + DEC have been determined experimentally.     

Density,refractive index on mixing,and speed of sound of the ternary mixtures (dimethyl carbonate or diethyl carbonate + methanol + toluene) and the corresponding binaries atT = 298.15 K

The density, refractive index on mixing, and speed of sound at T =  298.15 K and atmospheric pressure have been measured over the whole composition range for {dimethyl carbonate (DMC), or diethyl carbonate (DEC)  +  methanol  +  toluene}, (diethyl carbonate  +  methanol), (dimethyl carbonate, or diethyl carbonate  +  toluene), and (methanol  +  toluene). Excess molar volumes, changes of refractive index on mixing and deviations in isentropic compressibility for the above systems have been calculated. Redlich–Kister and Cibulka equations have been used to estimate the binary and ternary fitting parameters and standard deviations from the regression lines are shown. Values of derived and excess properties were estimated and compared by different methods.     

Volumetric and refractive properties of binary mixtures containing 1,4-dioxane and chloroalkanes

Refractive index deviations, excess volumes, and molar refractions of binary mixtures containing 1,4-dioxane and 1-chloropropane or isomeric chlorobutanes have been calculated from experimental data of refractive indices and densities at temperatures of 298.15 K and 313.15 K. Results obtained have been discussed in terms of intermolecular interactions and a comprehensive discussion has been provided. Excess volumes have been also correlated using Peng–Robinson–Stryjek–Vera cubic equation of state and the relation between parameter b (covolume) from the equation of state and molar refraction has been verified. Refractive indices were compared with those predicted using the equation of state and several mixing rules.     

Effect of the temperature on the physical properties of pure 1-propyl 3-methylimidazolium bis(trifluoromethylsulfonyl)imide and characterization of its binary mixtures with alcohols

In this paper, physical properties of a high purity sample of the ionic liquid 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [PMim][NTf₂], and its binary mixtures with methanol, ethanol, 1-propanol, and 2-propanol were measured at atmospheric pressure. The temperature dependence of density, refractive index and speed of sound (293.15 to 343.15) K and dynamic viscosity (298.15 to 343.15) K were studied at atmospheric pressure by conventional techniques for the pure ionic liquid. For its mixtures with alcohols, density, speed of sound, and refractive index were measured at T = 298.15 K over the whole composition range. The thermal expansion coefficient of the [PMim][NTf₂] was calculated from the experimental results using an empirical equation, and values of the excess molar volume, excess refractive index, and excess molar isentropic compressibility for the binary systems at the above mentioned temperature, were calculated and fitted to the Redlich–Kister equation. The heat capacity of the pure ionic liquid at T = 298.15 K was determined using DSC.     

Study on the phase behaviour and thermodynamic properties of ionic liquids containing imidazolium cation with ethanol at several temperatures

Experimental densities, speeds of sound and refractive indices of the binary mixtures of ethanol with MMIM MeSO₄ (1,3-dimethylimidazolium methyl sulfate), BMIM MeSO₄ (1-butyl-3-methylimidazolium methyl sulfate), BMIM PF₆ (1-butyl-3-methylimidazolium hexafluorophosphate), HMIM PF₆ (1-hexyl-3-methylimidazolium hexafluorophosphate) and OMIM PF₆ (1-methyl-3-octylimidazolium hexafluorophosphate) were determined from T = (293.15 to 303.15) K. Excess molar volumes, changes of refractive index on mixing and deviations in isentropic compressibility for the above systems were calculated. The (liquid + liquid) equilibrium (LLE) data of (IL + ethanol) were carried out experimentally and the NRTL and UNIQUAC correlative equation was applied to these mixtures.     

Physical properties of (propyl propanoate + hexane + toluene) at 298.15 K

The aim of this paper is to report experimental densities, excess molar enthalpies and refractive indexes of the ternary system (propyl propanoate + hexane + toluene) and of the corresponding binary mixtures (propyl propanoate + toluene) and (hexane + toluene) at the temperature 298.15 K and atmospheric pressure, over the whole composition range. Also, the excess molar volumes and the changes in the refractive index on mixing have been calculated from the measured data for all mixtures.     

Apparent molar volumes and compressibilities of electrolytes and ions in γ-butyrolactone

The densities of tetraphenylphosphonium bromide, sodium tetraphenylborate, lithium perchlorate, sodium perchlorate and lithium bromide in γ-butyrolactone at (288.15, 293.15, 298.15, 303.15, 308.15 and 313.15) K and speed of sound at 298.15 K have been measured. From these data apparent molar volumes V_Φ at (288.15, 293.15, 298.15, 303.15, 308.15 and 313.15) K and the apparent molar isentropic compressibility K_S,Φ, at T = 298.15 K of the salts have been determined. The apparent molar volumes and the apparent molar isentropic compressibilities were fitted to the Redlich, Rosenfeld and Mayer equation as well as to the Pitzer and Masson equations yielding infinite dilution data. The obtained limiting values have been used to estimate the ionic data of the standard partial molar volume and the standard partial isentropic compressibility in γ-butyrolactone solutions.     

Excess molar volume,viscosity, and refractive index study for the ternary mixture {2-methyl-2-butanol (1) + tetrahydrofuran (2) + propylamine (3)} at different temperatures. Application of the ERAS-model and Peng–Robinson–Stryjek–Vera equation of state

Densities, viscosities, and refractive indices of the ternary mixture consist of {2-methyl-2-butanol (1) + tetrahydrofuran (THF) (2) + propylamine (3)} at a temperature of 298.15 K and related binary mixtures were measured at temperatures of (288.15, 298.15, and 308.15) K at ambient pressure. Data were used to calculate the excess molar volumes and the deviations of the viscosity and refractive index. The Redlich–Kister and the Cibulka equations were used for correlating binary and ternary properties, respectively. The ERAS-model has been applied for describing the binary and ternary excess molar volumes and also Peng–Robinson–Stryjek–Vera (PRSV) equation of state (EOS) has been used to predict the binary and ternary excess molar volumes and viscosities.     

(Vapour + liquid) equilibria,densities, excess molar volumes,refractive indices,speed of sound for (methanol + allyl acetate) and (vinyl acetate + allyl acetate)

Isobaric (vapour  +  liquid) equilibria were determined atp =  101.3 kPa for {methanol  +  allyl acetate (3-acetoxy-1-propene)} and {vinyl acetate (1-acetoxyethylene)  +  allyl acetate}. The thermodynamic consistency of the experimental data was determined with a modified Dechema test. The activity coefficients were correlated with Margules, van Laar, NRTL, UNIQUAC, Wilson and ASOG. Densities, excess molar volumes, refractive indices, speed sounds and changes of refractive index and speed sound on mixing have been determined at 298.15 K and the results fitted to Redlich–Kister polynomials. Allyl acetate can be a possible solvent for extractive distillation.     

Thermodynamic properties of (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures at T = (298.15, 303.15, and 308.15) K

Density ρ, viscosity η, and refractive index n_D, values for (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures over the entire range of mole fraction have been measured at temperatures (298.15, 303.15, and 308.15) K at atmospheric pressure. The speed of sound u has been measured at T = 298.15 K only. Using these data, excess molar volume V^E, deviations in viscosity Δη, Lorentz–Lorenz molar refraction ΔR, speed of sound Δu, and isentropic compressibility Δk_s have been calculated. These results have been fitted to the Redlich and Kister polynomial equation to estimate the binary interaction parameters and standard deviations. Excess molar volumes have exhibited both positive and negative trends in many mixtures, depending upon the nature of the second component of the mixture. For the (tetradecane + chlorobenzene) binary mixture, an incipient inversion has been observed. Calculated thermodynamic quantities have been discussed in terms of intermolecular interactions between mixing components.     

Effect of temperature on the physical properties of 1-butyl-3-methylimidazolium based ionic liquids with thiocyanate and tetrafluoroborate anions,and 1-hexyl-3-methylimidazolium with tetrafluoroborate and hexafluorophosphate anions

The effect of temperature on the physical properties of some ionic liquids was investigated. Density, refractive index, surface tension, dynamic and kinematic viscosities of 1-butyl-3-methylimidazolium based ionic liquids with thiocyanate and tetrafluoroborate, and 1-hexyl-3-methylimidazolium with tetrafluoroborate and hexafluorophosphate anions were measured at various temperatures (density from T = (278.15 to 363.15) K, refractive index from (293.15 to 343.15) K, surface tension from (283.15 to 333.15) K, dynamic viscosity from (283.15 to 368.15) K, and kinematic viscosity from (298.15 to 363.15) K). The volumetric properties for the ionic liquids were also calculated from the experimental values of the density at T = 298.15 K. The Vogel–Fulcher–Tammann (VFT) equation was applied to correlate experimental values of dynamic and kinematic viscosities as a function of temperature. As well, the relation between density and refractive index was correlated satisfactorily with several empirical equations such as Lorentz–Lorenz, Dale–Gladstone, Eykman, Oster, Arago–Biot, Newton and Modified–Eykman. Finally, the relation between surface tension and viscosity was investigated and the parachor method was used to predict density, refractive index and surface tension of the ionic liquids.     

Changes in refractive indices of ternary mixtures containing benzene,cyclohexane, 1-pentanol,and anisole at T=298.15 K

Refractive indices for the ternary mixtures (benzene  +  1-pentanol  +  anisole), (cyclohexane  +  1-pentanol  +  anisole), and (benzene  +  cyclohexane  +  anisole) at T =  298.15 K and atmospheric pressure over the whole mole fraction range are reported. The corresponding derived property was calculated from the experimental data, and fitted to the Cibulka equation, such parameters being gathered. The application of the Heller equation in order to predict the excess molar volumes from experimental refractive index on mixing was studied with different mixing rules, a qualitative accuracy being obtained for the mixtures containing 1-pentanol due to the nonlinear character of its refractive index on mixing.