Preparation of a Rapidly Forming Poly(ferrocenylsilane)‐Poly(ethylene glycol)‐based Hydrogel by a Thiol‐Michael Addition Click Reaction

The synthesis of a rapidly forming redox responsive poly(ferrocenylsilane)‐poly(ethylene glycol) (PFS‐PEG)‐based hydrogel is described, achieved by a thiol‐Michael addition click reaction. PFS bearing acrylate side groups (PFS‐acryl) was synthesized by side group modification of poly(ferrocenyl(3‐iodopropyl)methylsilane) (PFS‐I) and characterized by ¹H NMR, ¹³C NMR, and FT‐IR spectroscopy. The equilibrium swelling ratio, morphology, rheology, and redox responsive properties of the PFS‐PEG‐based hydrogel are reported.

     

Reactive Polymer Coatings: A General Route to Thiol‐ene and Thiol‐yne Click Reactions

Reactive polymer coatings were synthesized via chemical vapor deposition (CVD) polymerization process. These coatings decouple surface design from bulk properties of underlying materials and provide a facile and general route to support thiol‐ene and thiol‐yne reactions on a variety of substrate materials. Through the reported technique, surface functions can be activated through a simple design of thiol‐terminated molecules such as polyethylene glycols (PEGs) or peptides (GRGDYC), and the according biological functions were demonstrated in controlled and low‐fouling protein adsorptions as well as accurately manipulated cell attachments.     

Thiol‐yne Click Adamantane Monolithic Stationary Phase for Capillary Electrochromatography

A porous crosslinked organic polymer based on N‐acryloxysuccinimide (NAS) and ethylene dimethacrylate (EDMA) was prepared inside 75 µm i.d. fused silica capillary as functionalizable monolithic stationary phase for electrochromatographic applications. Succinimide groups on the monolith surface provide reactive sites able to react readily through standard electrophile‐nucleophile chemistry. Propargylamine was used to prepare alkyne functionalized poly(NAS‐co‐EDMA). Onto this thiol‐reactive polymer surface was grafted adamantane units via a photochemically‐driven addition reaction. Chemical characterization was performed in situ after each synthetic step by means of Raman spectroscopy and grafting kinetics was investigated to ensure quantitative grafting of 1‐adamantanethiol. The as‐designed monolithic stationary phase exhibited typical reversed‐phase separation mechanism as evidenced by the linear increase of the logarithm of retention factor of neutral aromatic solutes with the increase of the aqueous buffer content in the mobile phase.     

Facile synthesis of dendrimers combining aza‐Michael addition with Thiol‐yne click chemistry

We report a highly efficient approach to prepare dendrimers by taking advantage of the orthogonal characteristic of aza‐Michael addition and thiol‐yne reactions. A fifth generation dendrimer was synthesized within five steps without protection/activation procedures. The reactions proceed under benign conditions without byproducts, and the target products can be easily purified via extraction or precipitation without chromatography. The structure of each generation dendrimer was characterized using NMR spectroscopy, size exclusion chromatography, and mass spectrometry. The obtained dendrimers can have peripheral amine or alkyne groups. We demonstrated that these groups can be used for selective and specific conjugation with various functional groups. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Development of Glassy Step‐Growth Thiol‐Vinyl Sulfone Polymer Networks

Thermomechanical properties of neat phosphine‐catalyzed thiol‐Michael networks fabricated in a controlled manner are reported, and a comparison between thiol‐acrylate and thiol‐vinyl sulfone step‐growth networks is performed. When highly reactive vinyl sulfone monomers are used as Michael acceptors, glassy polymer networks are obtained with glass transition temperatures ranging from 30 to 80 °C. Also, the effect of side‐chain functionality on the mechanical properties of thiol‐vinyl sulfone networks is investigated. It is found that the inclusion of thiourethane functionalities, aryl structures, and most importantly the elimination of interchain ester linkages in the networks significantly elevate the network's glass transition temperature as compared with neat ester‐based thiol‐Michael networks.

     

Polythioethers by Thiol‐Ene Click Polyaddition of α,ω‐Alkylene Thiols

The straightforward synthesis of a series of poly(thioether)s by photoinduced thiol‐ene click polyaddition of α,ω‐alkylene thiols is reported. It is found that linear and telechelic poly(thioether)s can be directly obtained from α,ω‐alkylene thiols with, for example, alkyl chain length of m = 1,2,3, and 9. The reaction proceeds without additives such as (radical) initiators or metal compounds and can simply be carried out by UV‐irradiation of the bulk monomer or monomer solution. Ex situ kinetic studies reveal that the reaction proceeds by a typical a step‐growth polyaddition mechanism. As the homologue series of poly(thioether)s are now synthetically accessible, new direct pathways to tailored poly(alkyl sulphoxide)s and poly(alkyl sulfone)s are now possible.

     

Thiol–Ene Click Chemistry

Following Sharpless′ visionary characterization of several idealized reactions as click reactions, the materials science and synthetic chemistry communities have pursued numerous routes toward the identification and implementation of these click reactions. Herein, we review the radical‐mediated thiol–ene reaction as one such click reaction. This reaction has all the desirable features of a click reaction, being highly efficient, simple to execute with no side products and proceeding rapidly to high yield. Further, the thiol–ene reaction is most frequently photoinitiated, particularly for photopolymerizations resulting in highly uniform polymer networks, promoting unique capabilities related to spatial and temporal control of the click reaction. The reaction mechanism and its implementation in various synthetic methodologies, biofunctionalization, surface and polymer modification, and polymerization are all reviewed.     

Synthesis of the Hemoglobin‐Conjugated Polymer Micelles by Thiol Michael Addition Reactions

Amphiphilic triblock copolymers mPEG‐b‐PMAC‐b‐PCL are synthesized using methoxyl poly(ethylene glycol), cyclic carbonic ester monomer including acryloyl group, and ε‐caprolactone. Copolymers are self‐assembled into core–shell micelles in aqueous solution. Thiolated hemoglobin (Hb) is conjugated with micelles sufficiently through thiol Michael addition reaction to form hemoglobin nanoparticles (HbNs) with 200 nm in diameter. The conjugation of Hb onto the micelle surface is further confirmed by X‐ray photoelectron spectroscopy. Feeding ratio of copolymer micelles to Hb at 1:3 would lead to the highest hemoglobin loading efficiency 36.7 wt%. The UV results demonstrate that the gas transporting capacity of HbNs is well remained after Hb is conjugated with polymeric micelles. Furthermore, the obtained HbNs have no obvious detrimental effects on blood components in vitro. This system may thus have great potential as one of the candidates to be developed as oxygen carriers and provide a reference for the modification of protein drugs.

     

[2]Rotaxane End-Capping Synthesis by Click Michael-Type Addition to the Vinyl Sulfonyl Group

We report the application of the click Michael-type addition reaction to vinyl sulfone or vinyl sulfonate groups in the synthesis of rotaxanes through the threading-and-capping method. This methodology has proven to be efficient and versatile as it allowed the preparation of rotaxanes using template approaches based on different noncovalent interactions (i.e., donor-acceptor π–π interactions or hydrogen bonding) in yields of generally 60–80 % and up to 91 % aided by the mild conditions required (room temperature or 0 °C and a mild base such as Et₃N or 4-(N,N-dimethylamino)pyridine (DMAP)). Furthermore, the use of vinyl sulfonate moieties, which are suitable motifs for coupling-and-decoupling (CAD) chemistry, implies another advantage because it allows the controlled chemical disassembly of the rotaxanes into their components through nucleophilic substitution of the sulfonates resulting from the capping step with a thiol under mild conditions (Cs₂CO₃ and room temperature).     

Novel Anti‐Biofouling Soft Contact Lens: l‐Cysteine Conjugated Amphiphilic Conetworks via RAFT and Thiol–Ene Click Chemistry

A unique l ‐cysteine conjugated antifouling amphiphilic conetwork (APCN) is synthesized through end‐crosslinking of well‐defined triblock copolymers poly(allyl methacrylate)‐b‐poly(ethylene glycol)‐b‐poly(allyl methacrylate) via a combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and thiol–ene “click” chemistry. The synthesized poly(ethylene glycol) macro‐RAFT agent initiates the polymerization of allyl methacrylate in a controlled manner. The vinyl pendant groups of the precursor partially conjugate with l ‐cysteine and the rest fully crosslink with mercaptopropyl‐containing siloxane via thiol–ene click chemistry under UV irradiation into APCNs, which show distinguished properties, that is, excellent biocompatibility, more than 39.6% water content, 101 barrers oxygen permeability, optimized mechanical properties, and more than 93% visible light transmittance. What's more, the resultant APCNs exhibit eminent resistance to protein adsorption, where the bovine serum albumin and lysozyme adsorption are decreased to 12 and 21 µg cm⁻², respectively. The outstanding properties of APCNs depend on the RAFT controlled method, which precisely designs the hydrophilic/hydrophobic segments and eventually greatly improves the crosslinking efficiency and homogeneity. Meantime, the l ‐cysteine monolayer can effectively reduce the surface hydrophobicity and prevent protein adsorption, which exhibits the viability for antifouling surface over and under ophthalmic devices, suggesting a promising soft contact lens.

     

Facile and Efficient Fabrication of Photoresponsive Microgels via Thiol–Michael Addition

A photoresponsive microgel is designed by the combination of a noncovalent assembly strategy with a covalent cross‐linking method. End‐functionalized poly(ethylene glycol) with azobenzene [(PEG‐(Azo)₂)] was mixed with acrylate‐modified β‐CD (β‐CD‐MAA) to form photoresponsive inclusion complex through host–guest interaction. The above photoresponsive complex was cross‐linked by thiol‐functionalized PEG (PEG‐dithiol) via Michael addition click reaction. The photoreversibility of resulted microgel was studied by TEM, UV–Vis spectroscopy, and ¹H NMR measurements. The characterization results indicated that the reversible size changes of the microgel could be achieved by alternative UV–Vis irradiations with good repeatability.     

Maleimide‐Modified Phosphonium Ionic Liquids: A Template Towards (Multi)Task‐Specific Ionic Liquids

The synthesis and characterization of several compounds representing a new class of multitask‐specific phosphonium ionic liquids that contain a maleimide functionality is reported. The maleimide moiety of the ionic liquid (IL) is shown to undergo Michael‐type additions with substrates containing either a thiol or amine moiety, thus, serving as a template to introduce wide structural diversity into the IL. Multitask‐specific ILs are accessible by reaction of the maleimide with Michael donors that are capable of serving some function. As a model example to illustrate this concept, a redox active ferrocenyl thiol was incorporated and examined by cyclic voltammetry. Because the maleimide moiety is highly reactive to additions, the task‐specific ionic liquids (TSILs) are prepared as the furan‐protected Diels–Alder maleimide. The maleimide moiety can then be liberated when required by simple heating.     

Facile Synthesis of Thiol‐Functionalized Long‐Chain Highly Branched ROMP Polymers and Surface‐Decorated with Gold Nanoparticles

The synthesis of thiol‐functionalized long‐chain highly branched polymers (LCHBPs) has been accomplished in combination of ring‐opening metathesis polymerization (ROMP) and thiol‐Michael addition click reaction. A monotelechelic polymer with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as an AB_n‐type macromonomer in subsequent thiol‐ene reaction between acrylate and thiol, yielding LCHBPs as the reaction time prolonged. Au nanoparticles are then covalently conjugated onto the surface of thiol‐functionalized LCHBP to fabricate novel hybrid nanostructures, which is shown as one interesting application of such functionalized metathesis polymers. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities.

     

Enantioselective Construction of Functionalized Thiochromans via Squaramide‐Catalyzed Asymmetric Cascade Sulfa‐Michael/Michael Addition

An efficient enantioselective cascade sulfa‐Michael/Michael addition reaction of trans‐3‐(2‐mercaptophenyl)‐2‐propenoic acid ethyl ester with nitroalkenes catalyzed by a chiral squaramide catalyst was disclosed. This cascade reaction afforded thiochroman derivatives with three contiguous stereocenters in high yields (up to 94%), excellent diastereoselectivities (up to >25:1 dr) and enantioselectivities (up to 99% ee).     

Thiol‐epoxy polymerization via an AB monomer: Synthetic access to high molecular weight poly(β‐hydroxythio‐ether)s

A synthetic route is developed for the preparation of an AB‐type of monomer carrying an epoxy and a thiol group. Base‐catalyzed thiol‐epoxy polymerization of this monomer gave rise to poly(β‐hydroxythio‐ether)s. A systematic variation in the reaction conditions suggested that tetrabutyl ammonium fluoride, lithium hydroxide, and 1,8‐diazabicycloundecene (DBU) were good polymerization catalysts. Triethylamine, in contrast, required higher temperatures and excess amounts to yield polymers. THF and water could be used as polymerization mediums. However, the best results were obtained in bulk conditions. This required the use of a mechanical stirrer due to the high viscosity of the polymerization mixture. The polymers obtained from the AB monomer route exhibited significantly higher molecular weights (M_w = 47,700, M_n = 23,200 g/mol) than the materials prepared from an AA/BB type of the monomer system (M_w = 10,000, M_n = 5400 g/mol). The prepared reactive polymers could be transformed into a fluorescent or a cationic structure through postpolymerization modification of the reactive hydroxyl sites present along the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2040–2046     

Peptide‐Catalyzed Stereoselective Conjugate Addition Reactions of Aldehydes to Maleimide

The tripeptide H‐d Pro‐Pro‐Asn‐NH₂ is presented as a catalyst for asymmetric conjugate addition reactions of aldehydes to maleimide. The peptidic catalyst promotes the reaction between various aldehydes and unprotected maleimide with high stereoselectivities and yields. The obtained products were readily derivatized to the corresponding pyrrolidines, lactams, lactones, and peptide‐like compounds. ¹H NMR spectroscopic, crystallographic, and computational investigations provided insight into the conformational properties of H‐d Pro‐Pro‐Asn‐NH₂ and revealed the importance of hydrogen bonding between the peptide and maleimide for catalyzing the stereoselective C?C bond formation.     

Fatty Acid Derived Monomers and Related Polymers Via Thiol‐ene (Click) Additions

Thiol‐ene additions of methyl 10‐undecenoate, a castor oil derived renewable platform chemical, were studied with the goal of preparing a set of renewable monomers. Good to excellent yields were obtained for these solvent and initiator free thiol‐ene additions. The resulting monomers were then polymerized using TBD as a catalyst, to linear as well as hyperbranched polyesters that also contain thio‐ether linkages. All thus prepared polymers were fully characterized (NMR, GPC, DSC, and TGA) and the results of these investigations will be discussed within this contribution. The thermal analysis of these polymers revealed melting points in the range from 50 to 71 °C. Moreover, no significant weight loss was observed below 300 °C.

     

Aqueous‐mediated Michael Addition of Active Methylene Compounds with Nitroalkenes

A simple, atom economical and highly efficient green protocol has been developed for the synthesis of Michael adducts of nitroalkenes and 2‐amino‐2‐chromene derivatives by Michael addition of active methylene compounds (such as malononitrile and ethyl cyanoacetate) to nitroalkenes under aqueous‐mediated conditions. This green approach provided the desired products in high yields and the reaction scope proved to be quite broad.     

Cysteine‐Functional Polymers via Thiol‐ene Conjugation

A thiofunctional thiazolidine is introduced as a new low‐molar‐mass building block for the introduction of cysteine residues via a thiol‐ene reaction. Allyl‐functional polyglycidol (PG) is used as a model polymer to demonstrate polymer‐analogue functionalization through reaction with the unsaturated side‐chains. A modified trinitrobenzenesulfonic acid (TNBSA) assay is used for the redox‐insensitive quantification and a precise final cysteine content can be predetermined at the polymerization stage. Native chemical ligation at cysteine‐functional PG is performed as a model reaction for a chemoselective peptide modification of this polymer. The three‐step synthesis of the thiofunctional thiazolidine reactant, together with the standard thiol‐ene coupling and the robust quantification assay, broadens the toolbox for thiol‐ene chemistry and offers a generic and straightforward approach to cysteine‐functional materials.