Monocrystalline titanium dioxide (TiO2) micro‐spheres support two orthogonal magnetic dipole modes at terahertz (THz) frequencies due to strong dielectric anisotropy. For the first time, we experimentally detected the splitting of the first Mie mode in spheres of radii m through near‐field time‐domain THz spectroscopy. By fitting the Fano lineshape model to the experimentally obtained spectra of the electric field detected by the sub‐wavelength aperture probe, we found that the magnetic dipole resonances in TiO2 spheres have narrow linewidths of only tens of gigahertz. Anisotropic TiO2 micro‐resonators can be used to enhance the interplay of magnetic and electric dipole resonances in the emerging THz all‐dielectric metamaterial technology.
The broadband enhancement of single‑photon emission from nitrogen‐vacancy centers in nanodiamonds coupled to a planar multilayer metamaterial with hyperbolic dispersion is studied experimentally. The metamaterial is fabricated as an epitaxial metal/dielectric superlattice consisting of CMOS‐compatible ceramics: titanium nitride (TiN) and aluminum scandium nitride (AlxSc1‐xN). It is demonstrated that employing the metamaterial results in significant enhancement of collected single‑photon emission and reduction of the excited‐state lifetime. Our results could have an impact on future CMOS‐compatible integrated quantum sources.
In recent years, unconventional metamaterial properties have triggered a revolution of electromagnetic research which has unveiled novel scenarios of wave‐matter interaction. A very small dielectric permittivity is a leading example of such unusual features, since it produces an exotic static‐like regime where the electromagnetic field is spatially slowly‐varying over a physically large region. The so‐called epsilon‐near‐zero metamaterials thus offer an ideal platform where to manipulate the inner details of the “stretched” field. Here we theoretically prove that a standard nonlinearity is able to operate such a manipulation to the point that even a thin slab produces a dramatic nonlinear pulse transformation, if the dielectric permittivity is very small within the field bandwidth. The predicted non‐resonant releasing of full nonlinear coupling produced by the epsilon‐near‐zero condition does not resort to any field enhancement mechanism and opens novel routes to exploiting matter nonlinearity for steering the radiation by means of ultra‐compact structures.
The terahertz (THz) radiation from InGaN/GaN dot‐in‐a‐wire nanostructures has been investigated. A submicrowatt THz signal is generated with just ten vertically stacked InGaN quantum dots (QDs) in each GaN nanowire. Based on the experimental results and analysis, a single quantum wire is expected to generate an output power as high as 10 pW, corresponding to 1 pW per dot. These structures are among the most efficient three‐dimensional quantum‐confined nanostructures for the THz emission. By applying a reverse bias along the wires in a light‐emitting device (LED) consisting of such nanostructures, the THz output power is increased more than fourfold. Based on THz and photoluminescence (PL) experiments, the mechanism for the THz emission is attributed to dipole radiation induced by internal electric fields and enhanced by external fields.
Nanophotonic beamsplitters are fundamental building blocks in integrated optics, with applications ranging from high speed telecom receivers to biological sensors and quantum splitters. While high‐performance multiport beamsplitters have been demonstrated in several material platforms using multimode interference couplers, their operation bandwidth remains fundamentally limited. Here, we leverage the inherent anisotropy and dispersion of a sub‐wavelength structured photonic metamaterial to demonstrate ultra‐broadband integrated beamsplitting. Our device, which is three times more compact than its conventional counterpart, can achieve high‐performance operation over an unprecedented 500 nm design bandwidth exceeding all optical communication bands combined, and making it one of the most broadband silicon photonics components reported to date. Our demonstration paves the way toward nanophotonic waveguide components with ultra‐broadband operation for next generation integrated photonic systems.
Tailoring of electromagnetic spontaneous emission predicted by E. M. Purcell more than 50 years ago has undoubtedly proven to be one of the most important effects in the rich areas of quantum optics and nanophotonics. Although during the past decades the research in this field has been focused on electric dipole emission, the recent progress in nanofabrication and study of magnetic quantum emitters, such as rare‐earth ions, has stimulated the investigation of the magnetic side of spontaneous emission. Here, we review the state‐of‐the‐art advances in the field of spontaneous emission enhancement of magnetic dipole quantum emitters with the use of various nanophotonics systems. We provide the general theory describing the Purcell effect of magnetic emitters, overview realizations of specific nanophotonics structures allowing for the enhanced magnetic dipole spontaneous emission, and give an outlook on the challenges in this field, which remain open to future research.
By investigating the transmission of electromagnetic waves through random media composed of a random cluster of inclusions embedded in a “double‐zero” medium with simultaneously near‐zero permittivity and permeability, a percolation behavior of photons squeezing through the gaps between random inclusions with unity transmittance is observed. Interestingly, such a percolation exhibits a threshold induced by the long‐range connectivity of the “nonconducting” component in the transverse direction instead of the “conducting” component in the propagation direction, which is distinctly different from those in normal percolations. This unusual phenomenon, obtained by full wave simulations, is explained analytically through the introduction of a geometric concept hereby denoted as “free surfaces”. This work reveals a unique type of percolation threshold for electromagnetic waves with potential applications in energy harvesting, sensors and switches.
We demonstrate a scheme incorporating dual‐coupled microresonators through which mode interactions are intentionally introduced and controlled for Kerr frequency comb (microcomb) generation in the normal‐dispersion region. Microcomb generation, repetition rate selection, and mode locking are achieved with coupled silicon nitride microrings controlled via an on‐chip microheater. The proposed scheme shows for the first time a reliable design strategy for normal‐dispersion microcombs and may make it possible to generate microcombs in an extended wavelength range (e.g. in the visible) where normal material dispersion is likely to dominate.
Optical absorbers find uses in a wide array of applications across the electromagnetic spectrum, including photovoltaic and photochemical cells, photodetectors, optical filters, stealth technology, and thermal light sources. Recent efforts have sought to reduce the footprint of optical absorbers, conventionally based on graded structures or Fabry‐Perot‐type cavities, by using emerging concepts in plasmonics, metamaterials, and metasurfaces. Unfortunately, these new absorber designs require patterning on subwavelength length scales, and are therefore impractical for many large‐scale optical and optoelectronic devices. In this article, we summarize recent progress in the development of optical absorbers based on lossy films with thicknesses significantly smaller than the incident optical wavelength. These structures have a small footprint and require no nanoscale patterning. We outline the theoretical foundation of these absorbers based on “ultra‐thin‐film interference”, including the concepts of loss‐induced phase shifts and critical coupling, and then review several applications, including ultra‐thin color coatings, decorative photovoltaics, high‐efficiency photochemical cells, and infrared scene generators.
This article presents a novel III‐V on silicon laser. This work exploits the phenomenon that a passive silicon cavity, side‐coupled to a III‐V waveguide, will provide high and narrow‐band reflectivity into the III‐V waveguide: the resonant mirror. This results in an electrically pumped laser with a threshold current of 4 mA and a side‐mode suppression ratio up to 48 dB.
Metasurfaces, which consist of resonant metamaterial elements in the form of two‐dimensional thin planar structures, retain great capabilities in manipulating electromagnetic wave and potential applications in modifying interaction with fluorescent molecules. The metasurfaces with magnetic responses are favorable to weakening fluorescence quenching while less investigated in controlling fluorescence. In this paper, we demonstrate control over fluorescence emission by engineering the magnetic and electric modes in plasmonic metasurfaces consisting of 45‐nm‐thick gold split‐ring‐resonators (SRRs). The fluorescence emission exhibits an enhancement factor of ∼18 and is predominantly x‐polarized with assistance of the magnetic mode excited by oblique incidence with an x‐polarized electric field. The magnetic and electric modes excited by oblique incidence with a y‐polarized electric field contribute to the rotation of emission polarization with respect to the incident polarization. The results demonstrate manipulating the interaction of fluorescent emitters with different resonant modes of the SRR‐based metasurface at the nanoscale by the polarization of incident light, providing potential applications of metasurfaces in a wide variety of areas, including optical nanosources, fluorescence spectroscopy and compact biosensors.
Optical frequency combs enable precision measurements in fundamental physics and have been applied to a growing number of applications, such as molecular spectroscopy, LIDAR and atmospheric trace‐gas sensing. In recent years, the generation of frequency combs has been demonstrated in integrated microresonators. Extending their spectral range to the visible is generally hindered by strong normal material dispersion and scattering losses. In this paper, we report the first realization of a green‐light frequency comb in integrated high‐Q silicon nitride (SiN) ring microresonators. Third‐order optical non‐linearities are utilized to convert a near‐infrared Kerr frequency comb to a broadband green light comb. The 1‐THz frequency spacing infrared comb covers up to 2/3 of an octave, from 144 to 226 THz (or 1327‐2082 nm), and the simultaneously generated green‐light comb is centered around 570‐580 THz (or 517‐526 nm), with comb lines emitted down to 517 THz (or 580 nm) and up to 597 THz (or 502 nm). The green comb power is estimated to be as high as −9.1 dBm in the bus waveguide, with an on‐chip conversion efficiency of −34 dB. The proposed approach substantiates the feasibility of on‐chip optical frequency comb generation expanding to the green spectral region or even shorter wavelengths.
A Luneburg lens is a fascinating gradient refractive index (GRIN) lens that can focus parallel light on a perfect point without aberration in geometrical optics. Constructing a three‐dimensional (3D) Luneburg lens at optical frequencies is a challenging task due to the difficulty of fabricating the desired GRIN materials. Here, we present the practical implementation of a 3D Luneburg lens at optical frequencies. Such a 3D Luneburg lens is designed with GRIN 3D simple cubic metamaterial structures, and fabricated with dielectric metamaterials by femtosecond laser direct writing in the commercial negative‐photoresist IP‐L. Simulated and experimental results exhibit an interesting 3D ideal focus for the infrared light. The protocol for developing the 3D Luneburg lens with ideal focus would prompt the potential applications in integrated light‐coupled devices and lab‐on‐chip integrated biological sensors based on infrared light.
A compact 64‐channel hybrid demultiplexer based on silicon‐on‐insulator nanowires is proposed and demonstrated experimentally to enable wavelength‐division‐multiplexing and mode‐division‐multiplexing simultaneously in order to realize an ultra‐large capacity on‐chip optical‐interconnect link. The present hybrid demultiplexer consists of a 4‐channel mode multiplexer constructed with cascaded asymmetrical directional‐couplers and two bi‐directional 17 × 17 arrayed‐waveguide gratings (AWGs) with 16 channels. Here each bi‐directional AWG is equivalent as two identical 1 × 16 AWGs. The measured excess loss and the crosstalk for the monolithically integrated 64‐channel hybrid demultiplexer are about ‐5 dB and ‐14 dB, respectively. Better performance can be achieved by minimizing the imperfections (particularly in AWGs) during the fabrication processes.
Periodic structures with a sub‐wavelength pitch have been known since Hertz conducted his first experiments on the polarization of electromagnetic waves. While the use of these structures in waveguide optics was proposed in the 1990s, it has been with the more recent developments of silicon photonics and high‐precision lithography techniques that sub‐wavelength structures have found widespread application in the field of photonics. This review first provides an introduction to the physics of sub‐wavelength structures. An overview of the applications of sub‐wavelength structures is then given including: anti‐reflective coatings, polarization rotators, high‐efficiency fiber–chip couplers, spectrometers, high‐reflectivity mirrors, athermal waveguides, multimode interference couplers, and dispersion engineered, ultra‐broadband waveguide couplers among others. Particular attention is paid to providing insight into the design strategies for these devices. The concluding remarks provide an outlook on the future development of sub‐wavelength structures and their impact in photonics.
Quantitative phase imaging (QPI), a method that precisely recovers the wavefront of an electromagnetic field scattered by a transparent, weakly scattering object, is a rapidly growing field of study. By solving the inverse scattering problem, the structure of the scattering object can be reconstructed from QPI data. In the past decade, 3D optical tomographic reconstruction methods based on QPI techniques to solve inverse scattering problems have made significant progress. In this review, we highlight a number of these advances and developments. In particular, we cover in depth Fourier transform light scattering (FTLS), optical diffraction tomography (ODT), and white‐light diffraction tomography (WDT).
Electromagnetic (EM) materials with perfect absorption have long been investigated for their important applications in many practical technologies. The trial‐and‐error method has been mostly employed to achieve this target, either by varying the constituent compositions for traditional natural material absorbers or by running computer simulations for general metamaterial (MM) absorbers. In this work, the authors propose a new method with analytical guidance to build omnidirectional perfect absorbers inspired by the recently proposed spatial Kramers‐Kronig (KK) nonreflecting dielectric profile. The subtle combination of the spatial and time dispersions in the metamaterial‐engineered KK profile gives the desired broadband response property. More importantly, these features remain invariant when the sample is uniformly compressed or stretched with large thickness change, i.e., this particular broadband absorber is deformable, which has been firstly reported in the literature. The current results will pave a new way to design high‐efficiency EM absorbers that could also be extended in general to manipulate waves for other fields or applications.
A novel approach to facilitate excitation and readout processes of isolated negatively charged nitrogen‐vacancy (NV) centers is proposed. The approach is based on the concept of all‐dielectric nanoantennas. It is shown that the all‐dielectric nanoantenna can significantly enhance both the emission rate and emission extraction efficiency of a photoluminescence signal from a single NV center in a diamond nanoparticle on a dielectric substrate. The proposed approach provides high directivity, large Purcell factor, and efficient beam steering, thus allowing an efficient far‐field initialization and readout of several NV centers separated by subwavelength distances.
Silicon‐based technologies provide an ideal platform for the monolithic integration of photonics and microelectronics. In this context, a variety of passive and active silicon photonic devices have been developed to operate at telecom and datacom wavelengths, at which silicon has minimal optical absorption ‐ due to its bandgap of 1.12 eV. Although in principle this transparency window limits the use of silicon for optical detection at wavelengths above 1.1 μm, in recent years tremendous advances have been made in the field of all‐silicon sub‐bandgap photodetectors at telecom and datacom wavelengths. By taking advantage of emerging materials and novel structures, these devices are becoming competitive with the more well‐established technologies, and are opening new and intriguing perspectives. In this paper, a review of the state‐of‐the‐art is presented. Devices based on defect‐mediated absorption, two‐photon absorption and the internal photoemission effect are reported, their working principles are elucidated and their performance discussed and compared.
Open‐access microcavities are emerging as a new approach to confine and engineer light at mode volumes down to the λ3 regime. They offer direct access to a highly confined electromagnetic field while maintaining tunability of the system and flexibility for coupling to a range of matter systems. This article presents a study of coupled cavities, for which the substrates are produced using Focused Ion Beam milling. Based on experimental and theoretical investigation the engineering of the coupling between two microcavities with radius of curvature of 6 m is demonstrated. Details are provided by studying the evolution of spectral, spatial and polarisation properties through the transition from isolated to coupled cavities. Normal mode splittings up to 20 meV are observed for total mode volumes around . This work is of importance for future development of lab‐on‐a‐chip sensors and photonic open‐access devices ranging from polariton systems to quantum simulators.
