Low‐Temperature Synthesis of Thermoresponsive Diblock Copolymer Nano‐Objects via Aqueous Photoinitiated Polymerization‐Induced Self‐Assembly (Photo‐PISA) using Thermoresponsive Macro‐RAFT Agents

Photoinitiated reversible addition‐fragmentation chain transfer (RAFT) dispersion polymerization of 2‐hydroxypropyl methacrylate is conducted in water at low temperature using thermoresponsive copolymers of 2‐(2‐methoxyethoxy) ethyl methacrylate and oligo(ethylene glycol) methacrylate (M_n = 475 g mol⁻¹) as the macro‐RAFT agent. Kinetic studies confirm that quantitative monomer conversion is achieved within 15 min of visible‐light irradiation (405 nm, 0.5 mW cm⁻²), and good control is maintained during the polymerization. The polymerization can be temporally controlled by a simple “ON/OFF” switch of the light source. Finally, thermoresponsive diblock copolymer nano‐objects with a diverse set of complex morphologies (spheres, worms, and vesicles) are prepared using this particular formulation.

     

Ugi Reactions with CO2: Access to Functionalized Polyurethanes,Polycarbonates, Polyamides,and Polyhydantoins

A novel strategy for the incorporation of carbon dioxide into polymers is introduced. For this purpose, the Ugi five‐component condensation (Ugi‐5CC) of an alcohol, CO₂, an amine, an aldehyde, and an isocyanide is used to obtain step‐growth monomers. Polymerization via thiol‐ene reaction or polycondensation with diphenyl carbonate gives diversely substituted polyurethanes or alternating polyurethane‐polycarbonates, respectively. Furthermore, the application of 1,12‐diaminododecane and 1,6‐diisocyanohexane as bifunctional components in the Ugi‐5CC directly results in the corresponding polyamide bearing methyl carbamate side chains ( = 19 850 g mol⁻¹). The latter polymer is further converted into the corresponding polyhydantoin in a highly straightforward fashion.

     

Novel Red Phosphorescent Polymers Bearing Both Ambipolar and Functionalized IrIII Phosphorescent Moieties for Highly Efficient Organic Light‐Emitting Diodes

A series of novel red phosphorescent polymers is successfully developed through Suzuki cross‐coupling among ambipolar units, functionalized Ir^III phosphorescent blocks, and fluorene‐based silane moieties. The photophysical and electrochemical investigations indicate not only highly efficient energy‐transfer from the organic segments to the phosphorescent units in the polymer backbone but also the ambipolar character of the copolymers. Benefiting from all these merits, the phosphorescent polymers can furnish organic light‐emitting diodes (OLEDs) with exceptional high electroluminescent (EL) efficiencies with a current efficiency (η _L) of 8.31 cd A⁻¹, external quantum efficiency (η _ext) of 16.07%, and power efficiency (η _P) of 2.95 lm W⁻¹, representing the state‐of‐the‐art electroluminescent performances ever achieved by red phosphorescent polymers. This work here might represent a new pathway to design and synthesize highly efficient phosphorescent polymers.

     

Polyfluorene Polyelectrolyte Nanoparticles: Synthesis of Innovative Stabilizers for Heterophase Polymerization

Polyfluorene‐bearing bromohexyl side chains are quaternized by 1‐vinylimidazole in order to attach dialkylimidazolium bromide ionic liquid (IL) species along the conjugated backbone. Subsequently, polyfluorene polyelectrolyte nanoparticles (NPs) of 40 nm in average size are created via radical cross‐linking of the pendant vinylimidazolium groups. Anion exchange from Br⁻ to BF₄⁻, PF₆⁻, and bis(trifluoromethylsulfonyl)imide anion (TFSI⁻) renders NPs adjustable dispersability in various organic solvents. The hydrophobic‐conjugated backbone and the hydrophilic dialkylimidazolium bromide IL moieties depict an amphiphilic profile, which allows the NPs to be deployed as conductive stabilizer in the emulsion polymerization of styrene. The resultant latexes are fluorescent, tunable in size and can be transferred to organic solvents without forfeiting their colloidal stability.

     

Individually Addressable Thermo‐ and Redox‐Responsive Block Copolymers by Combining Anionic Polymerization and RAFT Protocols

A novel diblock copolymer consisting of poly(vinylferrocene) (PVFc) and poly(N,N‐diethylacrylamide) (PDEA) is synthesized via a combination of anionic and RAFT polymerization. The use of a novel route to hydroxyl‐end‐functionalized metallopolymers in anionic polymerization and subsequent esterification with a RAFT agent leads to a PVFc macro‐CTA ( = 3800 g mol⁻¹; Đ = 1.17). RAFT polymerization with DEA affords block copolymers as evidenced by ¹H NMR spectroscopy as well as size exclusion chromatography (6400 ≤ ≤ 33700 g mol⁻¹; 1.31 ≤ Đ 1.28). Self‐assembly of the amphiphilic block copolymers in aqueous solution leads to micelles as shown via TEM. Importantly, the distinct thermo‐responsive and redox‐responsive character of the blocks is probed via dynamic light scattering and found to be individually and repeatedly addressable.

     

Balanced Ambipolar Poly(diketopyrrolopyrrole‐alt‐tetrafluorobenzene) Semiconducting Polymers Synthesized via Direct Arylation Polymerization

The synthesis of an ambipolar π‐conjugated copolymer consisting of alternating diketopyrrolopyrrole and tetrafluorobenzene via direct arylation polymerization (DAP) is reported. Two different combinations of monomers are investigated under various catalytic conditions for DAP. The target polymer obtained under an optimized catalytic condition shows minimal structural defects, a number‐average molecular weight of 33.2 kDa, and balanced electron and hole mobility of 1 × 10⁻² cm² V⁻¹ S⁻¹ in the organic field‐effect transistors fabricated and tested under ambient conditions.

     

Single‐Chain Self‐Folding of Synthetic Polymers Induced by Metal–Ligand Complexation

The controlled folding of a single polymer chain is for the first time realized by metal‐ complexation. α,ω‐Bromine functional linear polymers are prepared via activators regenerated by electron transfer (ARGET) ATRP (_,SEC = 5900 g mol⁻¹, Đ = 1.07 and 12 000 g mol⁻¹, Đ = 1.06) and the end groups of the polymers are subsequently converted to azide functionalities. A copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is carried out in the presence of a novel triphenylphosphine ligand and the polymers to afford homotelechelic bis‐triphenylphosphine polymeric‐macroligands (MLs) (_,SEC = 6600 g mol⁻¹, Đ = 1.07, and 12 800 g mol⁻¹, Đ = 1.06). Single‐chain metal complexes (SCMCs) are formed in the presence of Pd(II) ions in highly diluted solution at ambient temperature. The results derived via ¹H and ³¹P{¹H} NMR experiments, SEC, and DLS unambiguously evidence the efficient formation of SCMCs via metal ligand complexation.

     

No Strain,No Gain? Enzymatic Ring‐Opening Polymerization of Strainless Aliphatic Macrolactones

Starting from readily available oleic and erucic acid, macrocyclic nonadecalactone (C₁₉) and tricosalactone (C₂₃) can be synthesized in polymerization grade purity in a four‐step reaction sequence. Ring‐opening polymerization (ROP) of these strainless macrolactones can be performed utilizing an enzyme as a catalyst. Despite the missing ring‐strain as key driving force for smaller (strained) lactones, high molar masses (M _n ≈ 10⁵ g mol⁻¹) can be accessed in an entropically driven ROP. Polyester‐19 and polyester‐23 prepared feature melting temperatures well above 100 °C. Further analysis of the mechanical properties of these materials displays the resemblance to polyethylene. For example, Young's moduli on the order of 600 MPa are observed as a result of the high crystallinity of the polymer.

     

An Efficient N‐Heterocyclic Carbene‐Ruthenium Complex: Application Towards the Synthesis of Polyesters and Polyamides

The ruthenium benzimidazolylidene‐based N‐heterocyclic carbene (NHC) complex 4 catalyzes the direct dehydrogenative condensation of primary alcohols into esters and primary alcohols in the presence of amines to the corresponding amides in high yields. This efficient new catalytic system shows a high selectivity towards the conversion of diols to polyesters and of a mixture of diols and diamines to polyamides. The only side product formed in this reaction is molecular hydrogen. Remarkable is the conversion of hydroxytelechelic polytetrahydrofuran ( = 1000 g mol⁻¹)—a polydispers starting material—into a hydrolytically degradable polyether with ester linkages ( = 32 600 g mol⁻¹) and, in the presence of aliphatic diamines, into a polyether with amide linkages in the back bone ( = 16 000 g mol⁻¹).

     

Triptycene‐Based Microporous Polymer with Pending Tetrazole Moieties for CO2‐Capture Application

Triptycene‐based micorporous polymer is functionalized with CO₂‐philic tetrazole moieties via ZnCl₂‐catalyzed post‐polymerization. Gas adsorption experiments indicate that it possesses high CO₂ uptake capacity, reaching 134 cm³ g⁻¹ (26.5 wt%) at 1.0 bar and 273 K, along with high selectivity towards CO₂ over N₂ and CH₄. The porous polymeric networks present the promising potentials as efficient adsorbents in clean energy applications.

     

Convenient Pd‐Catalyzed Synthesis of Large Unimolecular Star Polyethylene Nanoparticles

A simplistic convenient “arm‐first” catalytic synthesis method is demonstrated to render soft unimolecular star polyethylene nanoparticles. Low‐dispersity polyethylene arms of controllable length and topology are first synthesized via Pd‐catalyzed “living” ethylene poly­merization. The subsequent addition of norbornadiene as a unique cross‐linker renders the block polymer containing a short polynorbornadiene (PNBD) sequence. Efficient and rapid catalytic cross‐linking of the PNBD sequences occurs in the polymer precipitation and drying steps to give rise to star polyethylene nanoparticles. The star polymers are featured with tunable arm length and topology, high molecular weight (as high as 1770 kg mol⁻¹), high arm numbers (as high as 88), and desirable average nano­particle size (29−72 nm).

     

Planar Conjugated Polymers Containing 9,10‐Disubstituted Phenanthrene Units for Efficient Polymer Solar Cells

Four novel conjugated polymers ( P1‐4 ) with 9,10‐disubstituted phenanthrene (PhA) as the donor unit and 5,6‐bis(octyloxy)benzothiadiazole as the acceptor unit are synthesized and characterized. These polymers are of medium bandgaps (2.0 eV), low‐lying HOMO energy levels (below −5.3 eV), and high hole mobilities (in the range of 3.6 × 10⁻³ to 0.02 cm² V⁻¹ s⁻¹). Bulk heterojunction (BHJ) polymer solar cells (PSCs) with P1‐4 :PC₇₁BM blends as the active layer and an alcohol‐soluble fullerene derivative (FN‐C60) as the interfacial layer between the active layer and cathode give the best power conversion efficiency (PCE) of 4.24%, indicating that 9,10‐disubstituted PhA are potential donor materials for high‐efficiency BHJ PSCs.

     

High‐Efficiency Large‐Bandgap Material for Polymer Solar Cells

High‐molecular‐weight conjugated polymer HD‐PDFC‐DTBT with N‐(2‐hexyldecyl)‐3,6‐difluorocarbazole as the donor unit, 5,6‐bis(octyloxy)benzothiadiazole as the acceptor unit, and thiophene as the spacer is synthesized by Suzuki polycondensation. HD‐PDFC‐DTBT shows a large bandgap of 1.96 eV and a high hole mobility of 0.16 cm² V⁻¹ s⁻¹. HD‐PDFC‐DTBT:PC₇₁BM‐based inverted polymer solar cells (PSCs) give a power conversion efficiency (PCE) of 7.39% with a V_oc of 0.93 V, a J_sc of 14.11 mA cm⁻², and an FF of 0.56.

     

Improved Thin‐Film Transistor Performance Through a Melt of Poly(para‐phenyleneethynylene)

The performance of polymer field‐effect transistors (PFETs) based on short rigid rod semiconducting poly(2,5‐didodecyloxy‐p‐phenyleneethynylene) (D‐OPPE) is highlighted. The controlled heating and cooling of thin films of D‐OPPE allows for a recrystallization from the melt, boosting the performance of D‐OPPE‐based transistors. The improved film properties induced by controlled annealing lead to a hole field‐effect mobility around 0.014 cm² V⁻¹ s⁻¹, an on/off ratio of 10⁶, a sub‐threshold swing of 3 V dec⁻¹ and a threshold voltage of −35 V, employing a poly(methyl methacrylate) (PMMA) gate dielectric. Thus, PFETs out of D‐OPPE compete now with spin‐coated, polycrystalline poly(3‐hexylthiophene)‐based PFETs.

     

Facile One‐Step Synthesis of Monodisperse Micron‐Sized Latex Particles with Highly Carboxylated Surfaces

A facile method for the aqueous synthesis of monodisperse and micronmeter‐sized colloids with highly carboxylated surfaces is presented. The method is applied to three different monomers, styrene, methyl methacrylate, and 2,2,2‐trifluoroethyl methacrylate, and illustrate tuning of the size and monodispersity in the reactions. High surface density of carboxylic acids of up to 10 COOH nm⁻² from potentiometric titrations, is achieved through copolymerization with itaconic acid. The versatility of this system is highlighted by creating highly fluorescent and monodisperse particles that can be index matched in aqueous solution and through surface modification via the carboxylic acid groups using standard amidation chemistry.

     

Chain‐End‐Functionalized Polyphosphazenes via a One‐Pot Phosphine‐Mediated Living Polymerization

A simple polymerization of trichlorophosphoranimine (Cl₃P = N−SiMe₃) mediated by functionalized triphenylphosphines is presented. In situ initiator formation and the subsequent polymerization progress are investigated by ³¹P NMR spectroscopy, demonstrating a living cationic polymerization mechanism. The polymer chain lengths and molecular weights of the resulting substituted poly(organo)phosphazenes are further studied by ¹H NMR spectroscopy and size exclusion chromatography. This strategy facilitates the preparation of polyphosphazenes with controlled molecular weights and specific functional groups at the α‐chain end. Such well‐defined, mono‐end‐functionalized polymers have great potential use in bioconjugation, surface modification, and as building blocks for complex macromolecular constructs.

     

Novel Donor–Acceptor Polymer Containing 4,7‐Bis(thiophen‐2‐yl)benzo[c][1,2,5]thiadiazole for Polymer Solar Cells with Power Conversion Efficiency of 6.21%

In order to improve the solution processability of 4,7‐bis(thiophen‐2‐yl)benzo[c][1,2,5]thiadiazole (DTBT)‐based polymers, novel donor–acceptor polymer PTOBDTDTBT containing DTBT and benzo[1,2‐b:4,5‐b′]dithiophene (BDT) with conjugated side chain is designed and synthesized with narrow band gap 1.67 eV and low lying HOMO energy level −5.4 eV. The blend film of PTOBDTDTBT and PC₇₁BM exhibits uniform and smooth film with root‐mean‐square (RMS) surface roughness 1.15 nm because of the excellent solubility of PTOBDTDTBT when six octyloxy side chains are introduced. The hole mobility of the blend film is measured to be 4.4 × 10⁻⁵ cm² V⁻¹s⁻¹ by the space‐charge‐limited current (SCLC) model. The optimized polymer solar cells (PSCs) based on PTOBDTDTBT /PC₇₁BM exhibits an improved PCE of 6.21% with V_oc = 0.80 V, J_sc = 11.94 mA cm⁻² and FF = 65.10%, one of the highest PCE in DTBT containing polymers.

     

Natural Anionic Polymer Acts as Highly Efficient Trypsin Inhibitor Based on an Electrostatic Interaction Mechanism

Sodium alginate (SA), acting as a trypsin inhibitor by means of electrostatic interaction, is studied. The half‐maximal inhibitory concentration (IC₅₀ = 0.05 μg mL⁻¹) of this natural anionic polymer is about 400 times lower than that of commercial soybean trypsin inhibitor (STI). Unlike the Ca²⁺‐deprivation mechanisms, its inhibition may be attributed to preventing the trypsin active site (TAS) from accessing the macromolecular substrates instead of denaturing it. SA is an efficient, innocuous, and cost‐effective inhibitory excipient that can be conveniently used in many peptide and protein dosage formulations.

     

Ion‐Conductive Properties of a Polymer Electrolyte Based on Ethylene Carbonate/Ethylene Oxide Random Copolymer

A random copolymer of ethylene oxide with CO₂, namely, poly(ethylene carbonate/ethylene oxide) (P(EC/EO)), has been synthesized as a novel candidate for polymer electrolytes. Electrolyte composed of P(EC/EO) and lithium bis(fluorosulfonyl)imide has an ionic conductivity of 0.48 mS cm⁻¹ and a Li transference number (t ₊) of 0.66 at 60 °C. To study ion‐conductive behavior of P(EC/EO)‐based electrolytes, the Fourier transform infrared (FT‐IR) technique is used to analyze the interactions between Li⁺ and functional groups of the copolymer. The carbonate groups may interact preferentially with Li⁺ rather than the ether groups in P(EC/EO). This study suggests that copolymerization of carbonate and flexible ether units can realize both high conductivity and t ₊ for polymer electrolytes. High‐performance P(EC/EO) electrolyte is expected to be a candidate material for use in all‐solid‐state batteries.

     

Synthesis of Hydroxy‐Functionalized Cyclic Olefin Copolymer and Its Block Copolymers with Semicrystalline Polyolefin Segments

Synthesis of hydroxy‐functionalized cyclic olefin copolymer (COC) is achieved with remarkably high activity (up to 5.96 × 10⁷ g‐polymer mol‐Ti⁻¹ h⁻¹) and controlled hydroxy group in a wide range (≈17.1 mol%) by using ansa‐dimethylsilylene (fluorenyl)(amido)titanium complex. The catalyst also promotes living/controlled copolymerization to afford novel diblock copolymers consisting of hydroxy‐functionalized COC and semicrystalline polyolefin sequence such as polyethylene and syndiotactic polypropylene, where the glass transition temperature of the norbornene/10‐undecen‐1‐ol segment and each block length are controlled by comonomer composition and copolymerization time, respectively.