Demonstrated in this work is a simple random ternary copolymerization strategy to synthesize a series of polymer acceptors, PTPBT‐ETx, by polymerizing a small‐molecule acceptor unit modified from Y6 with a thiophene connecting unit and a controlled amount of an 3‐ethylesterthiophene (ET) unit. Compared to PTPBT of only Y6‐like units and thiophene units, PTPBT‐ETx (where x represents the molar ratio of the ET unit) with an incorporated ET unit in the ternary copolymers show up‐shifted LUMO energy levels, increased electron mobilities, and improved blend morphologies in the blend film with the polymer donor PBDB‐T. And the all‐polymer solar cell (all‐PSC) based on PBDB‐T:PTPBT‐ET0.3 achieved a high power conversion efficiency over 12.5 %. In addition, the PTPBT‐ET0.3‐based all‐PSC also exhibits long‐term photostability over 300 hours. 相似文献
An easily accessible DPP‐based small molecule ( DMPA‐DTDPP ) has been synthesized by a simple and efficient route. The resulting molecule, when incorporated into a P3HT:PCBM‐based BHJ solar cell, is found to significantly improve the efficiency. The utility of DMPA‐DTDPP as an additive yields an increase in the short circuit current density (Jsc) because DMPA‐DTDPP serves as an energy funnel for P3HT excitons at the P3HT:PCBM interfaces, resulting in an improved overall power conversion efficiency, compared to the P3HT:PCBM control device. Considering the trouble‐free and cost effective synthesis of DMPA‐DTDPP , it may prove very useful in high‐performance solar cells. 相似文献
Homogeneous surface coating of multi‐walled carbon nanotubes is achieved for the first time by in situ copolymerization of ethylene (E) and 2‐norbornene (N) as catalyzed directly from the nanotube surface previously treated by a highly active metallocene‐based complex, i.e., rac‐Et(Ind)2ZrCl2/MMAO‐3A. The copolymerization reaction allows for the destructuration of the native nanotube bundles, which upon further melt blending with an ethylene–vinyl acetate copolymer (27 wt.‐% vinyl acetate) matrix, leads to high‐performance polyolefinic nanocomposites. The microstructural analysis of the surface‐coating copolymer was carried out by 13C NMR spectroscopy and allowed determination of the actual N content incorporated along the chains. Depending on the experimental conditions used (e.g., E pressure, solvent, feed N concentration) the relative quantity of E–N copolymer can be tuned, as well as the N content in the formed copolymers and accordingly their glass transition temperature.
The reactivity ratios for the bulk free‐radical copolymerization of n‐butyl acrylate (BA)/n‐butyl methacrylate (BMA) are estimated at 80 °C. By performing a series of low conversion runs including replicate runs, the reactivity ratios are estimated as rBA = 0.460 and rBMA = 2.008. Runs to high conversions are then conducted at three different feed compositions (fBMA = 0.2, 0.5, and 0.8) to validate the reactivity ratios. The composition data from the high conversion experiments show good agreement with the estimated reactivity ratios in the integrated form of the Mayo–Lewis model. The molecular weight, gel content, and glass transition temperature of BA/BMA copolymers are also determined.
Factors affecting the product distributions in ethylene/styrene copolymerizations catalyzed by Cp*TiCl2(O‐2,6‐iPr2C6H3) are explored in the presence of various cocatalysts at high styrene/ethylene feed ratios (at 40 and 55 °C). Ethylene/styrene copolymers were the sole product when the reactions were conducted in the presence of [PhN(H)Me2][B(C6F5)4] and AliBu3/Al(octyl)3 even at 55 and 70 °C, whereas syndiotactic polystyrene was by‐produced when the polymerizations were performed at >40 °C in the presence of MAO; the ratios of the copolymer/SPS were affected by the reaction temperature as well as Al cocatalyst employed.
A new general approach for rapid performance‐screening of polymer compositions is provided. Multiple compositions are generated as one‐dimensional libraries in a microextruder with step‐ or gradient‐composition changes in 2–10 g of polymer in < 1 min. To accelerate testing, environmental stress is applied to only local regions, followed by high‐sensitivity spatially resolved characterization. We applied our methodology for weathering of arrays of polymeric compositions and provided ranking of polymer/UV absorber compositions equivalent to traditional weathering data while achieved 20 times faster.
Sampling and measurement strategies for HT analysis of combinatorial 1D polymeric libraries: (1) spectroscopic monitoring of chemical properties, (2) in‐situ monitoring of mass and viscoelastic properties, (3) scanning spectroscopic analysis, and (4) spectroscopic imaging of a coiled polymeric array. 相似文献
Sixteen indolizidine‐based alkaloids (IBAs) that were isolated as poison constituents of the skin of frogs were synthesized in a highly flexible and stereoselective manner. As a key step, a three‐component, organocatalytic, highly enantio‐ and diastereoselective vinylogous Mukaiyama–Mannich reaction was employed furnishing optically highly enriched butyrolactams as central intermediates on a multigram scale. The attached six‐membered ring was constructed through cyclization of the pendant enoate moiety onto the pyrrolidine ring. The absolute configuration of the bridgehead chiral center and the adjacent 8‐position was established in the initial vinylogous Mannich reaction, whereas the 3‐ and 5‐substituents were introduced through organometallic addition at a late stage of the synthesis with full stereochemical control from the substrate. With this strategy, simple as well as even more complex alkaloids were accessible in good overall yields as single stereoisomers. These syntheses also served to establish the absolute and relative configuration of those IBAs that had never been synthesized before. 相似文献
Novel boron‐dipyrromethene (BODIPY)‐bridged 22‐oxacorrole dyads, using meso‐pyrrolyl 22‐oxacorrole as a key synthon, have been synthesized. The reactivity of the meso‐pyrrolyl group of 22‐oxacorrole was exploited to synthesize the first examples of BODIPY‐bridged 22‐oxacorrole dyads in ≈40 % yield. The dyads are stable and exhibited interesting spectral and electrochemical properties. 相似文献
We report the assembly of supramolecular boxes and coordination polymers based on a rigid bis‐zinc(II)‐salphen complex and various ditopic nitrogen ligands. The use of the bis‐zinc(II)‐salphen building block in combination with small ditopic nitrogen ligands gave organic coordination polymers both in solution as well as in the solid state. Molecular modeling shows that supramolecular boxes with small internal cavities can be formed. However, the inability to accommodate solvent molecules (such as toluene) in these cavities explains why coordination polymers are prevailing over well‐defined boxes, as it would lead to an energetically unfavorable vacuum. In contrast, for relatively longer ditopic nitrogen ligands, we observed the selective formation of supramolecular box assemblies in all cases studied. The approach can be easily extended to chiral analogues by using chiral ditopic nitrogen ligands. 相似文献
Due to the axial group initiation in traditional (salen)CoX/quaternary ammonium catalyst system, it is difficult to construct single active center propagating polycarbonates for copolymerization of CO2/epoxides. Here a redox‐responsive poly(vinyl cyclohexene carbonate) (PVCHC) with detachable disulfide‐bond backbone is synthesized in a controllable manner using (salen)CoTFA/[bis(triphenylphosphine)iminium, [PPN]TFA binary catalyst, where the axial group initiation is depressed by judiciously choosing 3,3′‐dithiodipropionic acid as starter. While for those comonomers failing to obtain polycarbonate with unimodal gel permeation chromatography (GPC) curve, a versatile method is developed by combination of immortal copolymerization and prereaction approach, and functional aliphatic polycarbonates having well‐defined architecture and narrow polydispersity can be prepared. The resulting PVCHC can be further functionalized with alkenes by versatile cross‐metathesis reaction to tune the physicochemical properties. The combination of immortal polymerization and prereaction approach creates a powerful platform for controllable synthesis of functional CO2‐based polycarbonates.
A new donor–acceptor polymer based on 9,9‐dioctylfluorene is synthesized and tested in organic photovoltaic devices. Results show that the polymer exhibits good solubility in a range of organic solvents and has a high hole mobility. When blended with a PC70BM acceptor and fabricated into a bulk heterojunction, photovoltaic devices having a maximum power conversion efficiency (PCE) of 6.2% and a peak external quantum efficiency of 74% are created. Such efficiencies are realized without any necessity for solvent additives or thermal annealing protocols.
Recent advance in high performance computing (HPC) resources has opened the possibility to expand the scope of density functional theory (DFT) simulations toward large and complex molecular systems. This work proposes a numerically robust method that enables scalable diagonalizations of large DFT Hamiltonian matrices, particularly with thousands of computing CPUs (cores) that are usual these days in terms of sizes of HPC resources. The well‐known Lanczos method is extensively refactorized to overcome its weakness for evaluation of multiple degenerate eigenpairs that is the substance of DFT simulations, where a multilevel parallelization is adopted for scalable simulations in as many cores as possible. With solid benchmark tests for realistic molecular systems, the fidelity of our method are validated against the locally optimal block preconditioned conjugated gradient (LOBPCG) method that is widely used to simulate electronic structures. Our method may waste computing resources for simulations of molecules whose degeneracy cannot be reasonably estimated. But, compared to LOBPCG method, it is fairly excellent in perspectives of both speed and scalability, and particularly has remarkably less (< 10%) sensitivity of performance to the random nature of initial basis vectors. As a promising candidate for solving electronic structures of highly degenerate systems, the proposed method can make a meaningful contribution to migrating DFT simulations toward extremely large computing environments that normally have more than several tens of thousands of computing cores. 相似文献
Frontal copolymerization is a process in which a spatially localized reaction zone propagates into a mixture of two monomers, converting them into a copolymer. In the simplest case of free‐radical copolymerization, a mixture of monomers and initiator is placed into a test tube. Reaction is initiated at one end of the tube, and a self‐sustained thermal wave, in which chemical conversion occurs, develops and propagates through the tube. We develop a mathematical model of the frontal copolymerization process and analytically determine the structure of the polymerization wave, the propagation velocity, maximum temperature, and degree of conversion of the monomers. Specifically, we examine their dependence on reactivity ratios as well as other kinetic parameters, monomer feed composition, and exothermicity of the reactions. Our analytic results are in good quantitative agreement with both direct numerical simulations of the model and experimental data, which are also presented in the paper.
Dependence of front velocity on monomer feed composition for different heat release parameters. 相似文献
A series of sterically demanding α‐diimine ligands bearing electron‐donating and electron‐withdrawing substituents were synthesized by an improved synthetic procedure in high yield. Subsequently, the corresponding Pd complexes were prepared and isolated by column chromatography. These Pd complexes demonstrated unique properties in ethylene polymerization, including high thermal stability and high activity, thus generating polyethylene with a high molecular weight and very low branching density. Similar properties were observed for ethylene/methyl acrylate copolymerization. Because of the high molecular weight and low branching density, the generated polyethylene and ethylene/methyl acrylate copolymer were semicrystalline solids. The (co)polymers had unique microstructures originating from the unique slow‐chain‐walking activity of these Pd complexes. 相似文献