A group of crosslinked cyclic siloxane (Si O) and silazane (Si N) polymers are synthesized via solvent‐free initiated chemical vapor deposition (iCVD). Notably, this is the first report of cyclic polysilazanes synthesized via the gas‐phase iCVD method. The deposited nanoscale thin films are thermally stable and chemically inert. By iCVD, they can uniformly and conformally cover nonplanar surfaces having complex geometry. Although polysiloxanes are traditionally utilized as dielectric materials and insulators, our research shows these cyclic organosilicon polymers can conduct lithium ions (Li+) at room temperature. The conformal coating and the room temperature ionic conductivity make these cyclic organosilicon polymers attractive for use as thin‐film electrolytes in solid‐state batteries. Also, their synthesis process and properties have been systemically studied and discussed.
A triblock copolymer containing the complementary hydrogen bonding recognition pair ureidoguanosine–diaminonaphthyridine (UG–DAN) as pendant functional groups is synthesized using ring‐opening metathesis polymerization (ROMP). The norbornene‐based DAN monomer is shown to allow for a controlled polymerization when polymerized in the presence of a modified‐UG molecule that serves as a protecting group, subsequently allowing for the fabrication of functionalized triblock copolymers. The self‐assembly of the copolymers was characterized using dynamic light scattering and 1H NMR spectroscopy. It is demonstrated that the polymers self‐assemble via complementary hydrogen bonding motifs even at low dilutions, indicating intramolecular interactions.
Carbazole‐based liquid single‐crystal elastomers (LSCEs) are valuable fluorescent flexible materials to perform optical mechanotransduction under ambient conditions. Indeed, the covalent incorporation of carbazole derivatives into nematic LSCEs allows to tune their luminescence on demand under mechanical control in a quick and reversible fashion. Specifically, the fluorescence intensity for these materials can be switched back and forth in less than a second. Moreover, such a process can be performed several times without detecting any sign of fatigue in the system. In addition, these materials show excellent resistance to aging; 2 years after their preparation they exhibit the very same mechanofluorescent behavior as when freshly prepared. In fact, the here reported fluorescent systems are highly sensitive; the application of a force of 70 mN decreases the fluorescence in the elastomeric material by 7%. Thus, mechanical forces are attractive external stimuli to modulate the fluorescence of nematic elastomers rapidly and reversibly enabling thereby mechanotransduction.
This work describes the synthesis of π‐conjugated polymers possessing arylene and 1,3‐butadiene alternating units in the main chain by the reaction of α,β‐unsaturated ester/nitrile containing γ‐H with aromatic/heteroaromatic aldehyde compound. By using 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester as a model monomer, the different polymerization conditions, including catalyst, catalyst amount, and solvent, are optimized. The polymerization of 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester is carried out by refluxing in ethanol for 72 h with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst to give a 1,3‐butadiene‐containing π‐conjugated polymer, poly(phenylene‐1,3‐butadiene), in 84.3% yield with and / (PDI) estimated as 6172 and 1.65, respectively. Based on this new methodology, a series of π‐conjugated polymers containing 1,3‐butadiene units with different substituents are obtained in high yields. A possible mechanism is proposed for the polymerization through a six‐membered ring transition state and then a 1,5‐H shift intermediate.
Polymers with pendant phenoxyl radicals are synthesized and the electrochemical properties are investigated in detail. The monomers are polymerized using ring‐opening metathesis polymerization (ROMP) or free‐radical polymerization methods. The monomers and polymers, respectively, are oxidized to the radical either before or after the polymerization. These phenoxyl radicals containing polymers reveal a reversible redox behavior at a potential of −0.6 V (vs Ag/AgCl). Such materials can be used as anode‐active material in organic radical batteries (ORBs).
This article summarizes recent progress in the post‐functionalization of conjugated polymers by electrochemical methods. These electrochemical polymer reactions typically proceed via electrochemical doping of a conjugated polymer film, followed by chemical transformation. Examples include the quantitative oxidative fluorination of polyfluorenes and oxidative halogenation of polythiophenes, as well as the reductive hydrogenation of polyfluorenones. The degree of functionalization, otherwise known as the reaction ratio, can be controlled by varying the charge passed through the polymer, allowing the optoelectronic properties of the conjugated polymers to be tailored. Wireless bipolar electrodes with an in‐plane potential distribution are also useful with regard to the electrochemical doping and reaction of conjugated polymers and allow the synthesis of films exhibiting composition gradients. Such bipolar electrochemistry can induce multiple reaction sites during electrochemical polymer reactions.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
Pillararene‐containing thermoresponsive polymers are synthesized via reversible addition–fragmentation chain transfer polymerization using pillararene derivatives as the effective chain transfer agents for the first time. These polymers can self‐assemble into micelles and form vesicles after guest molecules are added. Furthermore, such functional polymers can be further applied to prepare hybrid gold nanoparticles, which integrate the thermoresponsivity of polymers and molecular recognition of pillararenes.
A novel procedure has been developed for the Gilch reaction leading to poly(p‐phenylene vinylenes) (PPVs). In the first step, selective activation of the starting material is achieved at low temperature. Subsequently, controlled chain growth is induced by lighting the α‐halo‐p‐quinodimethane monomer. In contrast to the thermal Gilch polymerization, the photoinduced process allows adjusting crucial parameters such as intensity and energy of light. The progress of PPV formation can be followed visually or by in situ UV–vis spectroscopy. If the polymers are formed under appropriate conditions, they show very high molar masses, polydispersities in the common range, and higher constitutional homogeneity than thermally grown PPVs.
Copolymers of 2‐(methacrylamido)glucopyranose (MAG) and methacrylic acid (MAA) are synthesized by RAFT polymerization and then used as templates to prepare glycopolymer‐functionalized Ag nanoclusters (Gly‐Ag NCs) through microwave irradiation. Polymers and the resulting nanoclusters are characterized by NMR, GPC, UV‐Vis, SEM, TEM, AAS and fluorescence spectroscopy. The bio‐activity of the fluorescent Gly‐Ag NCs are further examined using GLUT‐1 over‐expressing cancer cells K562. Gly‐Ag NCs show efficient binding ability toward K562 cells and inhibit the cell viability in a dose dependent manner (IC50 = 0.65 μg mL–1), indicating their potential biological applications for both cancer imaging and targeted cancer therapy.
AB′ type monomers containing a thiolactone unit and vinyl ether moiety have been prepared with high yields. Aminolysis of the thiolactone moiety generates the corresponding thiol in situ, and upon UV‐irradiation, radical polyaddition occurs in the same medium, yielding linear poly(amide‐urethane)s with different side chain residues and (Poly(Ethylene Oxide)) PEO‐like backbone. Moreover, these unique polymers feature lower critical solution temperature behavior in water. Systematic modification of the responsive polymers reveals the influence of the variation of the side chains and the backbone structure on the corresponding solubility properties. In selected cases, multiresponsive polymers have been developed, which also respond to pH and metal concentration.
This communication describes the first application of cycloaddition between an in situ generated nitrile oxide with norbornene leading to a polymer crosslinking reaction for the preparation of poly(ethylene glycol) hydrogels under physiological conditions. Hydrogels with high water content and robust physical strength are readily formed within 2–5 min by a simple two‐solution mixing method which allows 3D encapsulation of neuronal cells. This bioorthogonal crosslinking reaction provides a simple yet highly effective method for preparation of hydrogels to be used in bioengineering.
In this study, a material is designed which combines the properties of shape‐memory and electroactive polymers. This is achieved by covalent cross‐linking of polyvinylidene fluoride. The resulting polymer network exhibits excellent shape‐memory properties with a storable strain of 200%, and fixity as well as recovery values of 100%. Programming upon rolling induces the transformation from the nonelectroactive α‐phase to the piezoelectric β‐phase. The highest β‐phase content is found to be 83% for a programming strain of 200% affording a d33 value of −30 pm V−1. This is in good accordance with literature known values for piezoelectric properties. Thermal triggering this material does not only result in a shape change but also renders the material nonelectroactive.
A series of fluorene‐based conjugated polymers containing the aggregation‐induced emissive (AIE)‐active tetraphenylethene and dicarboxylate pseudocrown as a receptor exhibits a unique dual‐mode sensing ability for selective detection of lead ion in water. Fluorescence turn‐off and turn‐on detections are realized in 80%–90% and 20% water in tetrahydrofuran (THF), respectively, for lead ion with a concentration as low as 10−8 m .
The synthesis of highly efficient two‐photon uncaging groups and their potential use in functional conjugated polymers for post‐polymerization modification are reported. Careful structural design of the employed nitrophenethyl caging groups allows to efficiently induce bond scission by a two‐photon process through a combination of exceptionally high two‐photon absorption cross‐sections and high reaction quantum yields. Furthermore, π‐conjugated polyfluorenes are functionalized with these photocleavable side groups and it is possible to alter their emission properties and solubility behavior by simple light irradiation. Cleavage of side groups leads to a turn‐on of the fluorescence while solubility of the π‐conjugated materials is drastically reduced.
Two soluble poly(phenyltriazolylcarboxylate)s (PPTCs) with high molecular weights (M w up to 26 800) are synthesized by the metal‐free 1,3‐dipolar polycycloadditions of 4,4′‐isopropylidenediphenyl diphenylpropiolate ( 1 ) and tetraphenylethene‐containing diazides ( 2 ) in dimethylformamide at 150 °C for 12 h in high yields (up to 93%). The resultant polymers are soluble in common organic solvents and are thermally stable with 5% weight loss temperatures higher than 375 °C. The PPTCs are nonemissive in solutions, but become highly luminescent upon aggregation, showing a phenomenon of aggregation‐induced emission. Their aggregates can be used as fluorescent chemosensors for high‐sensitivity detection of explosives.
Polydiacetylenes have received intense attention on account of their well‐established chromic alterations that are detectable often by the naked eye, making them ideal for a variety of applications such as biosensory materials. These polymers have been fabricated in a variety of materials platforms including 3D crystals, 2D monolayers, and 0D spherical vesicles; however, 1D morphologies that might be useful for directional energy migration are less common. This article describes the development and current research efforts of protein‐based 1D nanowire‐like supramolecular assemblies with embedded polydiacetylenes.
The sodium salt of the new bis(mesitoyl)phosphinic acid (BAPO‐OH) can be prepared in a very efficient one‐pot synthesis. It is well soluble in water and hydrolytically stable for at least several weeks. Remarkably, it acts as an initiating agent for the surfactant‐free emulsion polymerization (SFEP) of styrene to yield monodisperse, spherical nanoparticles. Time‐resolved electron paramagnetic resonance (TR‐EPR) and chemically induced electron polarisation (CIDEP) indicate preliminary mechanistic insights.
Amino‐cellulose‐based nanofibers are prepared by electrospinning of blended solutions of 6‐deoxy‐6‐trisaminoethyl‐amino (TEAE) cellulose and polyvinyl alcohol (PVA). The TEAE cellulose with a degree of substitution of 0.67 is synthesized via a nucleophilic displacement reaction starting from cellulose‐p‐toluenesulfonic acid ester. Several solution characteristics such as polymer concentration, electrical conductivity, and surface tension as well as setup parameters are investigated to optimize the ability of nanofiber formation. These parameters are evaluated using the rheological studies of the solutions. The nanofibers obtained are characterized by scanning electron microscopy (SEM) and show a high antimicrobial activity against Staphylococcus aureus and Klebsiella pneumoniae.
The present review focuses on the recent progress made in thin film orientation of semi‐conducting polymers with particular emphasis on methods using epitaxy and shear forces. The main results reported in this review deal with regioregular poly(3‐alkylthiophene)s and poly(dialkylfluorenes). Correlations existing between processing conditions, macromolecular parameters and the resulting structures formed in thin films are underlined. It is shown that epitaxial orientation of semi‐conducting polymers can generate a large palette of semi‐crystalline and nanostructured morphologies by a subtle choice of the orienting substrates and growth conditions.
