β‐Cyclodextrin Pseudopolyrotaxanes with π‐Conjugated Polymer Axles

Summary: β‐Cyclodextrin (β‐CD) pseudopolyrotaxanes containing poly(thiophene‐2,5‐diyl), PTh , or poly(3‐methylthiophene‐2,5‐diyl)s, P3MeTh s, as an axle were prepared. Structures of the pseudopolyrotaxanes and their inclusion behavior with β‐CD were investigated. The UV‐vis measurements revealed that inclusion of P3MeTh s by β‐CD depended on the flexibility of the main chain and their molecular weight.

Formation of the inclusion complex of β‐CD and PTh .     

Optimal Configurations of “Capped” β‐Cyclodextrin Dimers in Water Maximise Hydrophobic Association

Circular dichroism analysis and proton NMR experiments revealed that solutions of 3‐O‐(2‐methylnaphthyl)‐β‐cyclodextrin form different dimer configurations. The exact nature of the dimer configurations were postulated to be of three types in which these capped cyclodextrins (CDs) are orientated in head‐to‐head and head‐to‐tail arrangements. Here we show from detailed computer simulations and free‐energy calculations on the configurations that the head‐to‐head configuration in which the naphthyl groups are mutually inserted into each other’s CD cavities is the most favoured configuration. This configuration optimises the hydrophobic association of the naphthyl aromatic groups and the ring cavities as well as forming the most inter‐CD hydrogen bonds of the three configurations.     

Self‐Assembly Pluronic and β‐Cyclodextrin to Hollow Nanospheres for Enhanced Gene Delivery

This paper studies a kind of hollow nanospheres prepared by self‐assembly β‐cyclodextrins (β‐CDs) and poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (pluronic F127) for gene delivery. It was found that this kind of hollow nanospheres enable load PEI10K/DNA and the resulting F127 NH₂ βCD/(PEI10K/DNA) with 0.08 µg/well DNA display equal or higher gene delivery capability compared to PEI10K/DNA with 1 µg/well DNA in the absence or presence of serum. The cytotoxicity of the nanospheres was over 100 times lower than that of PEI10K.

     

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d‐maltosyl‐β‐cyclodextrin

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin were synthesized using functionalized silica as a matrix, 4‐(phenyldiazenyl)phenol as a light‐sensitive monomer, and 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin as a template. Fourier transform infrared spectroscopy results indicated that 4‐(phenyldiazenyl)phenol was grafted onto the surface of functionalized silica. The obtained imprinted polymers exhibited specific recognition toward 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin. Equilibrium binding experiments showed that the photoirradiation surface molecularly imprinted polymers obtained the maximum adsorption amount of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin at 20.5 mg/g. In binding kinetic experiments, the adsorption reached saturation within 2 h with binding capacity of 72.8%. The experimental results showed that the adsorption capacity and selectivity of imprinted polymers were effective for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin, indicating that imprinted polymers could be used to isolate 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin from a conversion mixture containing β‐cyclodextrin and maltose. The results showed that the imprinted polymers prepared by this method were very promising for the selective separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin.     

Heptyl α‐D‐Mannosides Grafted on a β‐Cyclodextrin Core To Interfere with Escherichia coli Adhesion: An In Vivo Multivalent Effect

n‐Heptyl α‐D ‐mannoside (HM) has previously been identified as a nanomolar FimH antagonist able to prevent Escherichia coli adhesion. We have designed mono‐ and heptavalent glycoconjugates in which HM is tethered to β‐cyclodextrin (β‐CD) through short and long spacers. One‐pot click or co‐clicking procedures were developed to directly obtain the glycoconjugates from unprotected HM and β‐CD precursors. These FimH antagonists were examined biophysically and in vivo. Reverse titrations by isothermal calorimetry led to trapping of the short‐tethered heptavalent β‐CD in a complex with three FimH lectins. Combined dynamic light scattering and small‐angle X‐ray solution scattering data allowed the construction of a model of the FimH trimer. The heptavalent β‐CDs were shown to capture and aggregate living bacteria in solution and are therefore also able to aggregate FimH when attached to different bacteria pili. The first in vivo evaluation of multivalent FimH inhibitors has been performed. The heptavalent β‐CDs proved to be much more effective anti‐adhesive agents than monovalent references with doses of around 2 μg instilled in the mouse bladder leading to a significantly decreased E. coli load. Intravenously injected radiolabeled glycoconjugates can rapidly reach the mouse bladder and >2 μg concentrations can easily be retained over 24 h to prevent fluxing bacteria from rebinding.     

“Supramolecular” Amphiphiles Created by Wrapping Poly(styrene) with the Helix‐Forming β‐1,3‐Glucan Polysaccharide

We have demonstrated that giant polymer micelles with a uniform diameter (ca. 200 nm) can be fabricated by “supramolecular wrapping” of poly(styrene) (PS) with the β‐1,3‐glucan polysaccharide, with the β‐1,3‐glucan fastening the PS chains together in a noncovalent fashion to facilitate the formation of a supramolecular polymer network on the O/W emulsion surface. Various spectroscopic and microscopic investigations have revealed that the inner cores of the micelles are comprised of a hydrophobic PS network, whereas the surfaces consist of a hydrophilic β‐1,3‐glucan layer. Accordingly, functional guest molecules can easily be encapsulated inside the cavity through hydrophobic interactions. The encapsulated molecules can simply be released from the micelle cores by peeling off the β‐1,3‐glucan shell in a supramolecular manner. As functional groups can be introduced into the glucose side‐chain unit in a straightforward manner by chemical modification, the micellar surface can acquire further functions useful for molecular recognition. These results show that the micelles obtained could have applications as novel soft nanoparticles, which would be indispensable not only for nanotechnologies, but also for biotechnologies aimed at gene or drug delivery systems.     

γ‐Cyclodextrin Derivatives Bearing Thymolphthalein Dyes in Their Secondary Hydroxyl Side as Guest‐Responsive Color Change Indicators

Two geometrically isomeric γ‐cyclodextrin derivatives with a thymolphthalein moiety in the secondary hydroxyl side were prepared as guest‐responsive color change indicators. The isomers exhibit a pH dependence of their absorption spectra and a remarkable change in the absorbance around 610 nm upon guest addition. One of the isomers formed complexes of 2 : 1, the other of 1 : 1 stoichiometry (host/guest).     

Synthesis of Anatase TiO2 Nanoparticles with β‐Cyclodextrin as a Supramolecular Shell

We report a novel, green hydrothermal‐synthesis route to well‐dispersed anatase TiO₂ nanoparticles with particle sizes of 9–16 nm in the presence of β‐CD (β‐cyclodextrin). During the synthesis process, the CD‐containing synthesis mixture assembled in both longitudinal and latitudinal directions. Driven by the interaction between molecules, the β‐CDs assembled in the longitudinal direction to form long‐chain compounds, whereas in the latitudinal direction, they tended to form regular aggregates through coordination with the Ti species from the hydrolysis of tetrabutyl titanate. In view of the effect of the coordination and the steric hindrance of β‐CDs as a supramolecular shell, homogeneous nuclei and slow growth of TiO₂ crystals during the synthesis process was observed, which was responsible for the formation of uniform TiO₂ nanoparticles. The low β‐CD dosage and the high product yield (>90 %) demonstrated well the potential of this synthesis route in the large‐scale industrial production of anatase nanoparticles.     

Heat‐Induced Supramolecular Organogels Composed of α‐Cyclodextrin and “Jellyfish‐Like” β‐Cyclodextrin–Poly(ε‐caprolactone)

In general, the complexation and gelation behavior between biocompatible poly(ε‐caprolactone) (PCL) derivatives and α‐cyclodextrin (α‐CD) is extensively studied in water, but not in organic solvents. In this article, the complexation and gelation behavior between α‐CD and multi‐arm polymer β‐cyclodextrin‐PCL (β‐CD‐PCL) with a unique “jellyfish‐like” structure are thoroughly investigated in organic solvent N,N‐dimethylformamide and a new heat‐induced organogel is obtained. However, PCL linear polymers cannot form organogels under the same condition. The complexation is characterized by rheological measurements, DSC, XRD, and SEM. The SEM images reveal that the complexes between β‐CD‐PCL and α‐CD present a novel topological helix porous structure which is distinctly different from the lamellar structure formed by PCL linear polymers and α‐CD, suggesting the unique “jellyfish‐like” structure of β‐CD‐PCL is crucial for the formation of the organogels. This research may provide insight into constructing new supramolecular organogels and potential for designing new functional biomaterials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1598–1606     

Photochemical Internalization of Tamoxifens Transported by a “Trojan‐Horse” Nanoconjugate into Breast‐Cancer Cell Lines

Photochemical internalization (PCI) has shown great promise as a therapeutic alternative for targeted drug delivery by light‐harnessed activation. However, it has only been applicable to therapeutic macromolecules or medium‐sized molecules. Herein we describe the use of an amphiphilic, water‐soluble porphyrin–β‐cyclodextrin conjugate (mTHPP‐βCD) as a “Trojan horse” to facilitate the endocytosis of CD‐guest tamoxifens into breast‐cancer cells. Upon irradiation, the porphyrin core of mTHPP‐βCD expedited endosomal membrane rupture and tamoxifen release into the cytosol, as documented by confocal microscopy. The sustained complexation of mTHPP‐βCD with tamoxifen was corroborated by 2D NMR spectroscopy and FRET studies. Following the application of PCI protocols with 4‐hydroxytamoxifen (4‐OHT), estrogen‐receptor β‐positive (Erβ+, but not ERβ?) cell groups exhibited extensive cytotoxicity and/or growth suspension even at 72 h after irradiation.     

Light‐Switchable Janus [2]Rotaxanes Based on α‐Cyclodextrin Derivatives Bearing Two Recognition Sites Linked with Oligo(ethylene glycol)

Two Janus [2]rotaxanes, 5a and 5b , with α‐cyclodextrin (α‐CD) derivatives substituted on the 6‐position with two recognition sites (azobenzene and heptamethylene (C7)) that were linked with linkers of different lengths (oligo(ethylene glycol) with a degree of polymerization equal to 2 or approximately 21) were synthesized and characterized. 2D ROESY NMR spectroscopy and circular dichroism (cd) spectra demonstrated that the recognition site of the α‐CD moiety was switched by photoisomerization of the azobenzene moiety in 5a and 5b . The different size changes of 5a and 5b in hydrodynamic radius (R_H) owing to the different length of linker between two recognition sites were observed by pulse‐field‐gradient spin‐echo NMR spectroscopy. The kinetic results indicated that the different length of linker had no or a weak effect for the photoisomerization process of 5a and 5b .     

IrIII and RuII Complexes Containing Triazole‐Pyridine Ligands: Luminescence Enhancement upon Substitution with β‐Cyclodextrin

Novel 2‐(1‐substituted‐1H‐1,2,3‐triazol‐4‐yl)pyridine (pytl) ligands have been prepared by “click chemistry” and used in the preparation of heteroleptic complexes of Ru and Ir with bipyridine (bpy) and phenylpyridine (ppy) ligands, respectively, resulting in [Ru(bpy)₂(pytl‐R)]Cl₂ and [Ir(ppy)₂(pytl‐R)]Cl (R=methyl, adamantane (ada), β‐cyclodextrin (βCD)). The two diastereoisomers of the Ir complex with the appended β‐cyclodextrin, [Ir(ppy)₂(pytl‐βCD)]Cl, were separated. The [Ru(bpy)₂(pytl‐R)]Cl₂ (R=Me, ada or βCD) complexes have lower lifetimes and quantum yields than other polypyridine complexes. In contrast, the cyclometalated Ir complexes display rather long lifetimes and very high emission quantum yields. The emission quantum yield and lifetime (Φ=0.23, τ=1000 ns) of [Ir(ppy)₂(pytl‐ada)]Cl are surprisingly enhanced in [Ir(ppy)₂(pytl‐βCD)]Cl (Φ=0.54, τ=2800 ns). This behavior is unprecedented for a metal complex and is most likely due to its increased rigidity and protection from water molecules as well as from dioxygen quenching, because of the hydrophobic cavity of the βCD covalently attached to pytl. The emissive excited state is localized on these cyclometalating ligands, as underlined by the shift to the blue (450 nm) upon substitution with two electron‐withdrawing fluorine substituents on the phenyl unit. The significant differences between the quantum yields of the two separate diastereoisomers of [Ir(ppy)₂(pytl‐βCD)]Cl (0.49 vs. 0.70) are attributed to different interactions of the chiral cyclodextrin substituent with the Δ and Λ isomers of the metal complex.     

Novel Anti‐Microbial Host‐Guest Complexes Based on Cationic β‐Cyclodextrin Polymers and Triclosan/Butylparaben

The preparation of novel cationic β‐cyclodextrin polymers (CPβCDs) and its complexes with butylparaben and triclosan were reported in this paper. FT‐IR and two‐dimensional (2D) ¹H–¹H gradient correlated spectroscopy (gCOSY) NMR spectra confirmed that the antibiotics could be included inside the lipophilic cavities of CPβCDs. The water solubility of the antibiotics was improved significantly after inclusion with CPβCDs. The results also suggest that it was easier for butylparaben, which had relatively small molecular size, to form the complexes with CPβCDs than triclosan. Due to the targeting effect after the inclusion with cationic CPβCDs, the anti‐microbial activity of butylparaben was also enhanced substantially. However, similar improvement was not obvious for triclosan.

     

α‐Cyclodextrin and methylmercury chloride: a new strategy to recover organomercurials

Methylmercury (MeHg) is one of the most toxic forms of mercury in the environment. It can be accumulated in fish through the food chain; after, consumption the fish is then dangerous to fetuses and younger children, causing abnormal brain development and nervous system disorders. Cyclodextrins (CDs) are cyclic oligosaccharides consisting of six, seven or eight units of glucose. In accord with the dimensions and hydrophilic–lipophilic properties, one can obtain inclusion of hydrophobic guests in a CD cavity. In the present work we used this characteristic of CD to obtain an inclusion compound between MeHgCl and the α‐cyclodextrin, looking for a new method to reduce MeHgCl toxicity and pre‐concentration. The inclusion compound was characterized through IR, ¹H, ¹³C NMR and Raman spectroscopy. ­X‐ray diffraction and thermal analysis (TG, DTG and DSC) methods were also used. Finally, biological tests were carried out and the minimum inhibitory concentrations (MICs) for MeHgCl, α‐cyclodextrin, the MeHgCl–CD complex and a physical mixture were determined. This host–guest strategy using cyclodextrins offers an alternative and powerful method for mercury remediation. Copyright © 2000 John Wiley & Sons, Ltd.     

Ultrasound‐Driven Secondary Self‐Assembly of Amphiphilic β‐Cyclodextrin Dimers

The controlled secondary self‐assembly of amphiphilic molecules in solution is theoretically and practically significant in amphiphilic molecular applications. An amphiphilic β‐cyclodextrin (β‐CD) dimer, namely LA‐(CD)₂, has been synthesized, wherein one lithocholic acid (LA) unit is hydrophobic and two β‐CD units are hydrophilic. In an aqueous solution at room temperature, LA‐(CD)₂ self‐assembles into spherical micelles without ultrasonication. The primary micelles dissociates and then secondarily form self‐assemblies with branched structures under ultrasonication. The branched aggregates revert to primary micelles at high temperature. The ultrasound‐driven secondary self‐assembly is confirmed by transmission electron microscopy, dynamic light scattering, ¹H NMR spectroscopy, and Cu²⁺‐responsive experiments. Furthermore, 2D NOESY NMR and UV/Vis spectroscopy results indicate that the formation of the primary micelles is driven by hydrophilic–hydrophobic interactions, whereas host–guest interactions promote the formation of the secondary assemblies. Additionally, ultrasonication is shown to be able to effectively destroy the primary hydrophilic–hydrophobic balances while enhancing the host–guest interaction between the LA and β‐CD moieties at room temperature.     

Hyperbranched cyclic and multicyclic polymers by “a2+b4” polycondensations

At first, theoretical aspects of “a₂+b₄” polycondensations (meaning polycondensations of difunctional and tetrafunctional monomers) are discussed and compared with what is known about “a₂+b₃” polycondensations. The following review of experimental results is subdivided into three sections. First, syntheses of hyperbranched polyethers and polyesters by polycondensations based on equimolar feed ratios will be reported. Second, kinetically controlled (i.e., irreversible) syntheses of multicyclic polymers using equifunctional feed ratios (i.e., a₂/b₄ ratios of 2:1) will be described. In the third section, syntheses of multicyclic polymers via thermodynamically controlled (reversible) “a₂+b₄” polycondensations will be discussed. Characteristic for these polycondensations are again equifunctional feed ratios and metal alkoxides as “a₂” or “b₄” monomers, which catalyze rapid equilibration reactions. Finally, potential applications of the new polymers will shortly be mentioned. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1971–1987, 2009     

Ferrocene–β‐Cyclodextrin Conjugates: Synthesis,Supramolecular Behavior,and Use as Electrochemical Sensors

Ferrocene with a β‐cyclodextrin unit bound to one or both cyclopentadienyl rings through the secondary face were conveniently synthesized by regiospecific copper(I)‐catalyzed cycloaddition of 2‐O‐propargyl‐β‐cyclodextrin to azidomethyl or bis(azidomethyl)ferrocene. The supramolecular behavior of the synthesized conjugates in both the absence and presence of bile salts (sodium cholate, deoxycholate, and chenodeoxycholate) was studied by using electrochemical methods (cyclic and differential pulse voltammetry), isothermal titration calorimetry, and NMR spectroscopy (PGSE, CPMG, and 2D‐ROESY). These techniques allowed the determination of stability constants, mode of inclusion, and diffusion coefficients for complexes formed with the neutral and, in some cases, the oxidized states of the ferrocenyl conjugates. It was found that the ferrocenyl conjugate with one β‐cyclodextrin unit forms a redox‐controllable head‐to‐head homodimer in aqueous solution. The ferrocene–bis(β‐cyclodextrin) conjugate is present in two distinguishable forms in aqueous solution, each one having a different half‐wave oxidation potential for the oxidation of the ferrocene. By contrast, only one distinguishable form for the oxidized state of the ferrocene–β‐cyclodextrin conjugate is detectable. The redox‐sensing abilities of the synthesized conjugates towards the bile salts were evaluated based on the observed guest‐induced changes in both the half‐wave potential and the current peak intensity of the electroactive moiety.     

Photocontrol of the Catalytic Activity of a β‐Cyclodextrin Bearing Azobenzene and Histidine Moieties as a Pendant Group

An azobenzene group was linked to β‐cyclodextrin via a histidine spacer ( 1 ) to produce a photoresponsive catalyst. The ester hydrolysis of p‐nitrophenyl acetate, Boc‐L ‐alanine‐p‐nitrophenyl ester and Boc‐D ‐alanine‐p‐nitrophenyl ester was examined in the presence of trans‐ 1 or cis‐ 1 . In the case of cis‐ 1 , the cyclodextrin cavity was used as the substrate binding site during imidazole‐catalyzed ester hydrolysis. This was not possible in the case of trans‐ 1 due to the inclusion of the trans‐azobenzene moiety in the cyclodextrin cavity. Consequently, the catalytic mechanism switches in an on‐off fashion on UV irradiation, associated with the conversion of the azobenzene moiety of 1 from trans to cis.