An independent kinetic and mechanistic study of the secondary reactions in the substitution of [FeL(OH)](n−2)− (L= triethylenetetraaminehexaacetic acid) by cyanide ions

Summary The kinetics of reaction between [Fe(CN)₅OH]^3– and CN^– have been investigated spectrophotometrically at pH=11.00, I=0.25 M(NaClO₄) and temp.=25.0°C by disappearance of the absorption peak at 395 nm. The rate data for this reaction followed first order kinetics in both [Fe(CN)₅OH^3–] and [CN^–]. The second order rate constant (k_f) was found to be (3.44±0.08)×10^–3 M^–1 s^–1. The pH dependence of the reaction was also investigated in the range 9–12. The activation parameters were found to be H=36.4kJ mol^–1 and S=–168JK^–1 mol^–1.The reaction between [Fe(CN)₆]^3– and TTHA^6– (TTHA=triethylenetetraaminehexaacetic acid) has also been followed spectrophotometrically at 420 nm, pH=11.00, I=0.1M (NaClO₄) and temp.=25.0°C. This reaction also followed first order kinetics in both [Fe(CN) ₆ ^3– ] and [TTHA^6–]. The second order rate constant (k_f) was found to be (3.74±0.21)×10^–2 M^–1 s^–1. The rate of reaction was found to increase with pH in the range 9–11.5. The different reactive species of TTHA (L) are H₂L^4– HL^5– and L^6–. The rate constants for these species have been calculated and the pH profile is explained. The values of the activation parameters were found to be H= 30.9 kJmol^–1 and S=–167JK^–1 mol^–1. Electron transfer from [Fe(CN)₆]^3– to the substrate followed by decomposition of the latter is proposed. The oxidation products of TTHA have been investigated by g.l.c.     

Short-Chain Di-Ureasil Ormolytes Doped with Potassium Triflate: Phase Diagram and Conductivity Behavior

Di-urea cross-linked poly(oxyethylene)/siloxane hybrids, synthesized by the sol-gel process and containing a wide concentration range of potassium triflate, KCF₃SO₃, have been analyzed by x-ray diffraction and differential scanning calorimetry. The pseudo-phase diagram proposed has been taken into account in the interpretation of the complex impedance measurements. The xerogels prepared are obtained as transparent, thin monoliths. At room temperature the highest conductivity found was 2 × 10^{–6 –1} cm^–1.     

Ab initio calculations of potential energy surface for reaction of nucleophilic addition of H− ion to methylacetylene

Within the framework of the Hartree-Fock-Roothaan Method, using double- basis sets 3-21++G and (6-31-H-G//3-21++G), the minimum energy paths (MEPs) have been calculated for reactions of nucleophilic addition of the hydride ion H^– to the methylacetylene molecule: CH₃-CCH+H^–[CH₃-CH=CH]^– (1) CH₃-CCH+H^–[CH₃-C=CH₂]^– (2). It has been established that the activation energy for reaction (2) is 7.02 kJ/mole lower than for reaction (1). An analysis has been made of the character of electron density distribution along the MEP of each reaction. It has been shown that distortion of geometry of the reactants plays an important role in intensifying the interaction of the frontier orbitals. The reasons for nonfulfillment of Markownikoff's rule for these reactions have been determined. The results from the calculations are compared with calculations reported in the literature for the related reaction of nucleophilic addition of the hydride ion H^– to the acetylene molecule: HCCH+H^–[CH₂=CH]^–.Translated from Teoreticheskaya i Éxperimental'naya Khimiya, Vol. 21, No. 3, pp. 303–309, May–June, 1985.     

Preparation of BaCe0.8Gd0.2O3−δ by the citrate method and its application in the synthesis of ammonia at atmospheric pressure

BaCe_0.8Gd_0.2O_3– is a kind of high-temperature proton conductor. A precursor of BaCe_0.8Gd_0.2O_3– solid electrolyte was synthesized by the citrate method and characterized by thermal analysis (thermogravimetric analysis–differential thermal analysis), X-ray diffraction and scanning electron microscopy. Using the sintered samples as a solid electrolyte and silver–palladium alloy as electrodes, we synthesized ammonia from nitrogen and hydrogen at atmospheric pressure in the solid-state proton-conducting-cell reactor. The rate of evolution of ammonia was up to 3.09×10^–9 mol s^–1 cm^–2.     

Role of radical ions in the thermally stimulated luminescence of uranium doped BaCO3 system

Electron paramagnetic resonance (EPR) studies of -irradiated uranium doped BaCO₃ have shown the formation of CO₃ ^–, CO₂ ^–, O₃ ^– and O₂ ^– ions. Thermally stimulated luminescence (TSL) glow curves of the -irradiated samples in the 300–600 K range have exhibited an intense peak around 360 K and a weak one around 440 K. The trap parameters for these peaks have been determined from TSL data. Spectral studies of the glow have revealed emission around 566, 583 and 590 nm characteristic of the uranate ion. From studies on the thermal stabilities of the radical ions, it has been inferred that the glow peak around 360 K is associated with the thermal destruction of O₂ ^– ion and the peak around 440 K is associated with the thermal destruction of CO₃ ^– ion.     

Determination of traces of bismuth by quenching of solid-substrate room-temperature phosphorescence from morin-labeled silicon dioxide nano-particles

Silicon dioxide nano-particles, diameter 50 nm, containing morin (morin–SiO₂) have been synthesized by the sol–gel method. They emit strong and stable room-temperature phosphorescence (SS-RTP) on filter paper as substrate, and bismuth can quench the intensity of the SS-RTP. On this basis a new morin–SiO₂ solid-substrate room-temperature phosphorescence-quenching method has been established for determination of traces of bismuth. Reduction of phosphorescence intensity (I_p) is directly proportional to the concentration of bismuth in the working range 0.16–14.4 ag spot^–1 (sample volume 0.40 L spot^–1, corresponding to the concentration range 0.40–36.0 fg mL^–1). The regression equation of the working curve is I_p=14.86+5.279×[Bi³⁺] (ag spot^–1) (n=6, r=0.9982). The detection limit of this method is 0.026 ag spot^–1 (corresponding to a concentration of 6.5×10^–17 g mL^–1).This sensitive, reproducible and accurate method has been used for successful analysis of real samples.     

Infrared Spectra of Krypton Solutions of Methylamine

Variable temperature (–105 to –145°C) studies of the infrared spectra (3500–400 cm^–1) of methylamine, CH₃NH₂, dissolved in liquid krypton have been recorded. From these data, the hydrogen bonding enthalpy has been determined to be 530 ± 29 cm^–1 (6.34 ± 0.35 kJ/mol). The elusive ₁₃ and ₁₄ fundamentals, which are strongly mixed CH₃ rock and NH₂ twist, have been observed at 1244 and 876 cm^–1, respectively. These assignments are supported by frequency predictions from ab initio MP2/6-31G(d) calculations where the predicted infrared intensities for these two vibrations are 0.054 and 0.002 km/mol. The ab initio predicted infrared spectrum compares very favorably with that observed in the krypton solution. Normal coordinate calculations have also been carried out for four other isotopomers of methylamine, CH₃NHD, CH₃ND₂, CD₃NH₂, and CD₃ND₂ and vibrational assignments given from previously reported infrared spectra of matrix isolated samples. The Raman spectrum of these latter three isotopes, along with the normal species, have been predicted from MP2/6-31G(d) calculations and the results compared to the experimental spectra. The equilibrium structural parameters have been obtained from ab initio calculations utilizing several different basis sets with full electron correlation by the perturbation method to second order. These predicted values are compared to the previously reported experimental structural parameters.     

The partial molal volume and compressibility change for the formation of the calcium sulfate ion pair at 25°C

The apparent molal volumes (_v) and compressibilities (_K) of CaSO₄ solutions have been determined at 25°C from precise density and sound-speed measurements. The large deviations of the values of _v and _K from the limiting law and various additivity estimates for the free ions (Ca²⁺, SO ₄ ^2– ) have been used to estimate the partial molal volume ( ) and compressibility ( ) for the formation of the CaSO ₄ ⁰ ion pair. Values of = 25 ± 3 cm³-mole^–1 and = (54±21)×10^–4 cm³-mole^–1-bar^–1 were found. Since these values are larger than the value for the formation of MgSO ₄ ⁰ , the results indicate that more inner-sphere ion pairs are formed when SO ₄ ^2– complexes with Ca²⁺ than with Mg²⁺. Using a simple model for ion-water interactions, the percent of inner-sphere or contact ion pairs in CaSO₄ solutions is estimated to be 36 to 37%.     

Equilibrium constants of some protonated,nonprotonated and hydroxo complexes of uranium(VI) with xylenol orange

Summary The species, UO₂H₃L^–, UO₂H₂L^2–, UO₂HL^3–, UO₂L^4–, UO₂(OH)L^5– and UO₂(OH)₂L^6– are found in the equilibria between uranyl ions and 3,3-bis[N,N-di(carboxymethyl)-aminomethyl]-o-cresolsulphonphthalein (H₆L; xylenol orange; dcac) in aqueous solution. The equilibria have been studied by the potentiometric method at 25° and at an ionic strength of 0.1M (KNO₃). New algebraic equations have been employed to evaluate the equilibrium constants.     

Kinetics of base hydrolysis of trans-{Cr([15]aneN4)Cl2}+ ([15]aneN4 = 1,4,8,12-tetra-azacyclopentadecane)

Summary Reaction of CrCl₃(DMF)₃ with [15]aneN₄ (L; L = 1,4,8,12-tetra-azacyclopentadecane) gives the green trans-{Cr([15]-aneN ₄)Cl₂}Cl in high yield. The base hydrolysis kinetics of the cations [CrLCl₂]⁺ and [CrLCl(OH)] ⁺ have been investigated over a temperature range. For the dichloro complex, k _OH = 1.03 dm³ mol^–1 s^–1] at 25° C with H =30.4 kJmol^–1 and S _inf298 ^sup = -143 JK^–1 mol^–1. The substantial negative entropy of activation implies more association of water in the loss of Cl^– from the conjugate base in a D_CB mechanism. The kinetic parameters for the chlorohydroxo complex are k _OH = 1.9 × 10^–2dm³mol^–1 s^–1 at 25°C with H = 78.3kJmol^–1 and H _inf298 ^sup = -15 J K^–1 mol ^–1. The chlorohydroxo complex probably has the trans VI configuration with the chloride ligand on the same side of the equatorial plane as the four chiral sec-NH groups. The visible spectra of a variety of complexes trans-[Cr(L)XY] ⁿ⁺ (X = Y = Cl, OH, OH₂; X = Cl, Y = OH) have been determined.     

Analytical application of atomic emission and atomic absorption spectrometry for the determination of imidazoline derivatives based on formation of ion-associates with sodium cobaltinitrite and potassium ferricyanide

Ion-association complexes of Naphazoline HCl (I), Tolazoline HCl (II) and Xylometazoline HCl (III) with [Co(NO₂)₆]^3– and [Fe(CN)₆]^3– were precipitated and the excess of the unreacted iron or cobalt comples was determined. A new method using atomic emission and atomic absorption spectrometry for the determination of the above drags in pure solutions and in pharmaceutical preparations is given. The drugs have been determined in the ranges 0.98–14.76, 0.78–11.80 and 1.12–16.80 g/ml solutions of I, II and III. respectively, using [Co(NO₂)₆]^3–], with mean relative standard deviations of 0.4–1.5% and 1.92%–19.68, 1.52–5.68 and 2.24–22.4 g/ml solutions of I, II and III, respectively using [Fe(CN)₆]^3– with mean relative standard deviations of 0.6–1.6%. The recovery values of 98.12–101.26% indicate high precision and accuracy.     

Partial Molar Volumes of Transfer of Some Amino Acids from Water to Aqueous Glycerol Solutions at 25°C

Apparent molar volumes of glycine, DL--alanine, L-valine, L-leucine, and L-phenylalanine in 0.5, 1.0, 2.0, 3.5, and 5.0 m _B (mol-kg^–1) aqueous solutions of glycerol have been obtained from solution densities at 25°C using precise vibrating-tube digital densimeter. The estimated partial molar volumes at infinite dilution V ^o ₂ have been used to obtain the corresponding transfer volumes _tr V ₂ ^o from water to different glycerol–water mixtures. The transfer volumes are positive for glycine and DL--alanine, and both positive and negative for the other amino acids over the concentration range studied. Interaction coefficients have been obtained from McMillan–Mayer approach and the data have been interpreted in terms of solute–cosolute interactions.     

An evaluation of rate constants for radiation induced decomposition of alkali metal nitrates

Radiation induced decomposition of solid alkali metal nitrates at room temperature has been studied up to an absorbed dose of 300 kGy. [NO ₂ ^– ] increases with absorbed dose. From the kinetic scheme and , rate constants have been evaluated for the overall radiolytic decomposition of alkali metal nitrates. This kinetic scheme is applicable in the low dose range. At higher doses, however, the radiation induced reaction, NO ₂ ^– +1/2 O₂NO ₃ ^– may also contribute. The overall rate constants are 0.13×10^–6 (LiNO₃), 1.05×10^–6 (NaNO₃), 10.10×10^–6 (KNO₃), 9.50×10^–6 (RbNO₃) and 25.50×10^–6 (CsNO₃) kGy^–1.     

An upper bound to bond electric dipole moments

An upper bound can be set to the dipole moment of the X-H bond (with X+H^– polarity) for symmetrical molecules of XH₄ and XH₃ type from the experimental values of the g factor and bond length. The following upper bounds have been found to the bond dipole moments: CH₄ (C+H^–<0.902 D, SiH₄, (Si+H^–)<4.21 D, GeH₄+ (Ge+H^–)<3.59 D, NH₃ (N+H^–)<0, PH₃ (P+H^–)<2.74 D. These results enable one to rule out certain published data on the dipole moment of the C-H bond in methane as certainly incorrect. In the case of the ammonia molecule, the possibility of N+H^– polarity is ruled out.Translated from Teoreticheskaya i Éksperimental'naya Khitniya, No. 3, pp. 346–350, May–June, 1985.     

Synthesis,spectroscopic, photophysical and electrochemical behaviour of ruthenium(II) and copper(I) isocyano-bridged complexes with polypyridine ligands: 2,2′-bipyridine and 1,10-phenanthroline

New binuclear complexes with [Cu(PPh₃)₃]⁺ and [Cu(PPh₃)(N—N)]⁺ (N—N – 2,2-bipyridine, 1,10-phenanthroline) moieties connected via the isocyanide group to [Ru(bpy)₂(py)]⁺ and [Ru(phen)₂(py)]⁺ have been prepared and isolated as PF₆ ^– salts. In addition, new trinuclear complexes, [{(PPh₃)₃Cu(-NC)}₂Ru(bpy)₂](PF₆)₂ and [{(N—N)-(PPh₃)Cu(-NC)}₂Ru(bpy)₂](PF₆)₂, have been synthesized using [Ru(bpy)₂(CN)₂]. The complexes have been characterized by elemental analyses, i.r., n.m.r., u.v.–vis., FAB mass spectra and by conductivity measurements. The i.r. spectra reveal an increase in v;(CN) in the isocyano-bridged complexes compared to the mononuclear parent complexes. The complexes are luminescent with emission wavelengths in the 458–550 and 600–636 nm ranges. The half wave reduction potentials in MeCN are always more positive than those of the parent complexes. It is observed that the isocyano-bridged complexes are more powerful excited state reductants than the cyano-bridged, Cu^(I)(-CN)Ru^(II) complexes.     

The electrical conductance of hexaamminemetal nitrates in liquid ammonia

The electrical conductance behavior of hexaamminemetal nitrates of Cr(III), Co(II–III), Ni(II), and Cu(II) in liquid ammonia has been measured at temperatures varying from –40 to –75°C. Both univalent and divalent dissociations have been considered. The two outer-sphere association constantsK ₁ andK ₂, which control the properties in the concentration range employed, have been determined together with ₀ in a way described earlier by Fuoss. The thermodynamic quantities H^o and S^o of the univalent dissociation, evaluated from the temperature dependence of the association constants, are remarkably independent of the nature and charge of the metal ion. Walden products of the cations are presented and discussed.     

A study by pulse radiolysis of the radiation-chemical transformation of aqueous solutions of hydrazine in the presence of oxygen

It is shown by pulse radiolysis that in aqueous solutions of hydrazine containing oxygen the radical N₂H₃ reduces oxygen to O₂ ^– at pH > 7 (k 3·10⁹ dm³· mole^–1·sec^–1), while this reaction does not occur for the protonated form N₂H₄ ⁺ at pH < 7 (k, 5·10⁶ dm³·mole^–1·sec^–1). The rate constants for the disappearance of O₂ ^– have been determined in the pH range from 4 to 12. Rate constants have been calculated for the reaction of O^– with N₂H₄ [k=(1.6 ±0.2)·10⁹ dm³·mole^–1·sec^–1] and of O₃with N₂H₄ [k=(1.2 ±0.2)·10⁶ dm³· mole^–1·sec^–1].Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 341–345, February, 1991.     

Theoretical Evidence of Aromaticity in X3 − (X = B, Al, Ga) Species

We investigated the electronic structure and chemical bonding of the B₃ ^–, Al₃ ^–, and Ga₃ ^– anions, and the gas phase NaB₃, NaAl₃, and NaGa₃ molecules. We found that the ground state of the neutral gas phase salts contains an equilateral triangular anion interacting with a Na⁺ cation. The B₃ ^–, Al₃ ^–, and Ga₃ ^– anions possess two delocalized electrons and are found to be aromatic. The triangular anions have been shown to be related to recently synthesized organometallic compound containing an aromatic -Ga₃ ^2– unit, but they are differ from them by four valence electrons. The reason for earlier appearance of the -orbital in the B₃ ^–, Al₃ ^–, and Ga₃ ^– anions is discussed.     

The PVT properties of concentrated aqueous electrolytes. IV. Changes in the compressibilities of mixing the major sea salts at 25°C

The speed of sound of mixtures of the six possible combinations of the major sea salt ions (Na⁺, Mg²⁺, Cl^–, and SO ₄ ^2– ) have been determined at I=3.0 and at 25°C. The results have been used to determine the changes in the adiabatic compressibility of mixing K_m the major sea salts. The values of K_m have been fit to the equation K_m=y₂y₃I²[k₀+k₁(1-2y₃)] where y_i is the ionic strength fraction of solute i, k₀ and k₁ are parameters related to the interactions of like-charged ions. The Young cross-square rule is obeyed to within ±0.04×10^–6 cm³-kg^–1-bar^–1. A linear correlation was found between the compressibility k₀ and volume v₀ interaction parameters (10⁴k₀=–0.24+3.999 v₀, s=0.15) in agreement with out earlier findings. Estimates of the sound speeds for the cross square mixtures (NaCl+MgSO₄ and MgCl₂+Na₂SO₄) were made using the equations of Reilly and Wood. The estimated sound speeds were found to agree on the average with the measured values to ±0.36 m-sec^–1.     

2,3-Dihydroxypyridine-loaded cellulose: a new macromolecular chelator for metal enrichment prior to their determination by atomic absorption spectrometry

New macromolecular chelators have been synthesized, by loading 2,3-dihydroxypyridine (DHP) on cellulose via linkers -NH-CH₂-CH₂-NH-SO₂-C₆H₄-N=N- and -SO₂-C₆H₄-N=N-, and characterized by elemental analysis, TGA, IR, and CPMAS ¹³C NMR spectra. The cellulose with DHP anchored by the shorter linker had better sorption capacity (between 69.7 and 431.1 mol g^–1) for Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II), and Fe(III)) than the other (51.9–378.1 mol g^–1); the former was therefore studied in detail as a solid extractant for these metal ions. The optimum pH ranges for quantitative sorption (recovery 97.6–99.8%) on this matrix were: 7.0–9.0, 6.0–9.0, 3.0–8.0, 6.0–8.0, 6.0–9.0, 6.0–7.0, and 2.0–6.0 respectively. Desorption was quantitative with 0.5 mol L^–1 HCl and 0.5 mol L^–1 HNO₃ (for Pb). Simultaneous sorption (at pH 7.0) of all metal ions other than Fe(III) was possible if their total concentration did not exceed the sorption capacity (lowest value). The recovery of seven metal ions from their mixture at pH 6.0 was nearly quantitative when the concentration level of each metal ion was 0.2 g mL^–1. The optimum flow rate of metal ion solutions for quantitative sorption of metal onto a column packed with DHP-modified cellulose was 2–7 mL min^–1, whereas for desorption the optimum flow rate for the acid solution was 2–4 mL min^–1. The time needed to reach 50% of the total loading capacity (t_1/2) was <5 min for all the metal ions except Ni and Pb. The limit of detection (blank+3s) was from 0.70 to 4.75 g L^–1 and the limit of quantification (blank+10s) was between 0.79 and 4.86 g L^–1. The tolerance limits for NaCl, NaBr, NaI, NaNO₃, Na₂SO₄, Na₃PO_4, humic acid, EDTA, Ca(II), and Mg(II) for sorption of all metal ions are reported. The column packed with DHP-anchored cellulose can be reused at least 20 times for enrichment of metal ions in water sample. It has been used to enrich all the metal ions in pharmaceutical and water samples before their determination by flame AAS. RSD for these determinations was between 1.1 and 6.9%.