Estimation of total heterogeneity properties of carbon nanotubes

Physico-chemical properties (adsorption capacity, desorption energy distribution and pore-size distribution functions) of nanomaterial surfaces from selected materials, based on sorptometric and liquid thermodesorption measurements under quasi-equilibrium conditions, are presented. The fractal dimensions of nanotubes using sorptometric and AFM data have been evaluated. Comparison of thermogravimetric and other data provide new information about the adsorption and pore structure of the studied materials. The fractal dimensions of nanomaterial surfaces using sorptometry are in good agreement with those from AFM.     

Fractal dimensions from Q-TG data for estimation of surface heterogeneity

Programmed thermodesorption of n-butanol from Na-, La-montmorillonite, natural and commercial zeolite samples in quasi-isothermal conditions made. The new method of fractal dimension calculations from thermogravimetry data has been presented. On the basis of nitrogen adsorption-desorption isotherms from sorptometry and mercury porosimetry data the fractal dimensions of montmorillonites were calculated. The results from above independent and separated techniques were compared and good correlation were obtained. This revised version was published online in July 2006 with corrections to the Cover Date.     

World of nanostructures - nanotechnology,surface properties of chosen nanomaterials

Summary The paper presents the basic information on nanotechnology and the recent results of studies of physicochemical properties of chosen nanomaterial surfaces (montmorillonites, carbon nanotubes, smart surfaces) by means of complex measuring methods. Physicochemical properties of nanomaterial surfaces by means of the special thermogravimetry Q-TG, sorptometry, porosimetry, atomic force microscopy (AFM) and scanning electron micrograph (SEM) methods were investigated. A numerical and analytical procedure for the evaluation of total heterogeneous properties (desorption energy distribution and pore-size distribution functions) on the basis of liquid thermodesorption from the sample surfaces under the quasi-equilibrium conditions and sorptometry techniques are presented. The evaluation of the fractal dimensions of nanotubes using the sorptometry, porosimetry, thermogravimetry Q-TG and AFM data are presented. The comparison of fractal coefficients calculated based on them with the results from Q-TG, sorptometry, porosimetry and AFM gave good agreement.     

Adsorption and porosity properties of carbon-covered alumina surfaces

Uniformly carbon-covered alumina (CCA) was prepared via the carbonisation of sucrose highly dispersed on the alumina surface. Using special thermogravimetry and sorptometry methods physicochemical properties of carbon-covered alumina surfaces were investigated. A numerical and analytical procedure for the evaluation of total heterogeneous properties (desorption energy distribution and pore-size distribution functions) on the basis of liquid thermodesorption from the sample surfaces under the quasi-equilibrium conditions are presented. The desorption energy distribution was derived from the mass loss Q-TG and the differential mass loss Q-DTG curves of thermodesorption of pre-adsorbed polar and apolar liquid films. For the first time, the evaluation of the fractal dimensions of carbon-covered alumina using the sorptometry, thermogravimetry and AFM data is presented.     

Adsorption and porosity properties of pure and modified carbon nanotube surfaces

Modified carbon multiwall nanotubes were prepared via the oxidation process by means of 65% nitric acid or ferric nitrate dissolved with 65% nitric acid. Using special thermogravimetry and sorptometry methods physicochemical properties of pure and modified nanotube surfaces were investigated. A numerical and analytical procedure for the evaluation of total heterogeneous properties on the basis of liquid thermodesorption from the sample surfaces under the quasi-equilibrium conditions are presented. The calculations of the fractal dimensions of carbon nanotubes using the sorptometry and thermogravimetry data is presented.     

Surface properties of silica gel samples modified by selected proteins

The adsorption of a polar (water) and a non-polar (n-octane) liquid on silica gels, modified by adsorption of proteins, has been studied by thermal analysis. Silica gels with physically adsorbed BSA and ovalbumin layers were used. Thermodesorption energies were determined from Q-TG and Q-DTG curves recorded under quasi-equilibrium conditions. Significant differences in liquid desorption were observed from the surfaces due to heterogeneous changes (energetic and geometrical) as a result of modification. These results are compared with those obtained for the samples heated at 160°C for 1 h.     

Determination of total heterogeneity and fractal dimensions of high-temperature superconductors

Using thermo-analytical and sorptometric methods physicochemical properties and especially surface heterogeneity of HgBa₂Ca₂Cu₃O₈₊, (Hg-1223) was investigated. The desorption energy distribution was derived from mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption in quasi-isothermal conditions of pre-adsorbed n-octane and water vapour. It is shown that the superconducting Hg-1223 phase is highly sensitive to water vapours. The mechanism of water adsorption depends largely on the activation time. By water vapour saturation in a period of 90 min, physisorption takes place. Prolonged periods result in a chemical decomposition. From nitrogen ad- and desorption isotherms the fractal dimension of superconductors were calculated. A new approach is proposed to calculate fractal dimension from Q-TG curves.This revised version was published online in November 2005 with corrections to the Cover Date.     

Studies of surface properties of pure and modified by Mn<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript> ions of aluminium oxide samples using complex methods

Complex studies of physicochemical properties of pure and modified of aluminia oxides samples are presented. The presence of Mn²⁺ and Ni²⁺ modifiers on the aluminium oxide surface causes increase in water adsorption capacity and decrease in benzene and n-octane adsorption. This is due to decrease of specific surface area, volume and radius of pores as a result of surface impregnation and microcrystal formation during modification with manganese and nickel chlorides. Microcrystal formation on the surface and porosity decrease as confirmed by AFM, EDX and powder diffraction studies using automated diffractometer by step scanning. From the Q-TG and Q-DTG data, the energies of liquid desorption from the surface of the samples and the functions of desorption, energy distribution were calculated. High degree of nonlinearity of the functions resulting from great heterogeneity of the studied surface was found. Adsorption of cations creates more homogeneous surface in aluminium oxide, and it is responsible for the change in adsorbate molecule interaction energy and changes mechanism of adsorption and desorption as well as thickness and structure of the adsorbed film. From the experimental data some parameters characterizing adsorption properties and porosity of the studied samples were determined using the complex measuring methods (thermal analysis, sorptometry, porosimetry, AFM and EDX).     

Application of fractal geometry for studies of heterogeneity properties of nanomaterials

Calculations based on the fractal geometry in the estimation of surface heterogeneity are superior compared with conventional calculation methods (e.g. from the data of gas adsorption or X-ray radiation scattering) as they can be applied without limitation as far as the range of surface sizes of the studied structures is concerned. This paper presents structural characteristics of carbon and carbon- free nanomaterials based on the determined surface and volumetric fractal coefficients. Fractal coefficients were determined from the data obtained by means of two independent methods: sorptometry and atomic force microscopy (AFM). Correlation between porosity parameters and fractal coefficients is presented.     

Studies of physicochemical properties of the surfaces with the chemically bonded phase of BSA

The paper presents the method of preparation and determination of physicochemical properties of silica gels with a chemically bonded BSA phase as well as studies of the effect of support porosity on the synthesis. Wide-porous Z-300 and narrow-porous Z-100 silica gels were studied. The investigations showed a significant effect of pore size on the synthesis of stationary phases with BSA. Modification with protein results in changes of adsorption properties and porosity of adsorbent samples. Changes of physicochemical properties result in significant changes of geometrical and structural heterogeneity of the support (specific surface area, fractal coefficient) as well as energetic heterogeneity of the samples. This revised version was published online in July 2006 with corrections to the Cover Date.     

Studies of heterogeneity properties of selected high-temperature superconductor surfaces

Nitrogen adsorption measured at 77 K was used to characterize the surface heterogeneity of high-temperature superconductor surfaces. Properties relating to adsorption and porosity of the solids (adsorption capacity, specific surface area, radii and volume of the pores, pore-size distribution function) were determined from nitrogen adsorption–desorption isotherms and atomic force microscopy (AFM) for a series of oxide superconductors. It is shown that the adsorption isotherms of all samples are S-shaped and belong to type II according to the IUPAC classification. On the basis of the nitrogen adsorption isotherms and AFM data, fractal dimensions were determined and correlations found with adsorption and porosity parameters.     

Characterizing NF and RO membrane surface heterogeneity using chemical force microscopy

Chemical force microscopy (CFM) was used to characterize the chemical heterogeneity of two commercially available nanofiltration and reverse osmosis membranes. CFM probes were modified with three different terminal functionalities: methyl (CH₃), carboxyl (COOH), and hydroxyl (OH). Chemically distinct information about the membrane surfaces was deduced based on differences in adhesion between the CFM probes and the membrane surfaces using both traditional atomic force microscopy (AFM) force measurements and spatially resolved friction images. Contact angle titration and streaming potential measurements provided general information about surface chemistry and potential, which largely complemented the CFM analyses, but could not match the accuracy of CFM on the atomic level. Using CFM it was found that both membranes were characterized as chemically heterogeneous. Specifically, membrane chemical heterogeneity became more significant as the scan size approached colloidal or micron-sized dimensions. In many instances, the chemically unique regions, contributing to the overall chemical heterogeneity of the membrane surface, were substantially different in chemistry (e.g., hydrophobicity) from that determined for the surface at large from contact angel and streaming potential analyses. Topographical and corresponding CFM images supports previous adhesion studies finding a correlation between surface roughness and the magnitude of adhesion measured with AFM. However, chemical specificity was also significant and in turn measurable with CFM. The implication of these findings for future membrane development is discussed.     

Spectral force analysis using atomic force microscopy reveals the importance of surface heterogeneity in bacterial and colloid adhesion to engineered surfaces

Coatings developed to reduce biofouling of engineered surfaces do not always perform as expected based on their native properties. One reason is that a relatively small number of highly adhesive sites, or the heterogeneity of the coated surface, may control the overall response of the system to initial bacterial deposition. It is shown here using an approach we call spectral force analysis (SFA), based on force volume imaging of the surface with atomic force microscopy, that the behavior of surfaces and coatings can be better understood relative to bacterial adhesion. The application of vapor deposited TiO₂ metal oxide increased bacterial and colloid adhesion, but coating the surface with silica oxide reduced adhesion in a manner consistent with SFA based on analysis of the “stickiest” sites. Application of a TiO₂-based paint to a surface produced a relatively non-fouling surface. Addition of a hydrophilic layer coating to this surface should have decreased fouling. However, it was observed that this coating actually increased fouling. Using SFA it was shown that the reason for the increased adhesion of bacteria and particles to the hydrophilic layer was that the surface produced by this coating was highly heterogeneous, resulting in a small number of sites that created a stickier surface. These results show that while it is important to manufacture surfaces with coatings that are relatively non-adhesive to bacteria, it is also essential that these coatings have a highly uniform surface chemistry.     

A study on phase morphology and surface properties of polyurethane/organoclay nanocomposite

In this study, polyurethane/organically modified layered silicate (organoclay) nanocomposites were prepared through in situ polymerization in the presence of organoclay. Phase morphology of the polyurethane/organoclay nanocomposite was investigated by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The results suggest that the inter-domain repeat distance decreased with the introduction of organoclay. The organoclay has a more significant effect on the inter-domain repeat distance at a low hard segment content. Also with the increase of the hard segment, the inter-domain repeat distance and domain size increased markedly. The size of hard domain of the polyurethane was found to be in the range of 12-32 nm in this case, and it keeps nearly unchanged with the clay content. It is suggested by AFM phase imaging technique that the hard domain can self-organize further to form spherical aggregates. The introduction of clay into the polyurethane matrix resulted in the decrease in the size of the spherical aggregates from ∼800 nm to ∼500 nm, indicating clay has an important effect on the aggregation behavior of hard domains. The effect of clay on the surface energy was examined by means of AFM and goniometry techniques. The results obtained by two methods are consistent, i.e., with the increase of clay content, the surface energy decreased due to the effect of organic modifier.     

Dilatational properties and morphology of surface films spread from clinically used lung surfactants

The dilatational properties, structure, and morphology of the surface films spread at the air–water interface from complex lipid/protein systems were studied by measuring the surface pressure–area and surface potential–area isotherms, the surface rheological properties, and AFM images. The commercially available lung surfactants Alveofact, Curosurf, Survanta, and Exosurf were used as examples.The isotherms of the studied lung surfactant surface films are compared with model lipid and protein monolayers spread from bulk solutions. On the basis of a simple rheological model, the values for the elasticity and the specific time of relaxation related to the reorganization processes occurring in the monolayers were calculated. The spread films of natural surfactants Curosurf and Alveofact show a high effectiveness of spreading and respreading under the conditions of this study. These observations were confirmed by AFM imaging.     

Textural and structural properties and surface acidity characterization of mesoporous silica-zirconia molecular sieves

Homogeneous mesoporous zirconium-containing MCM-41 type silica were prepared by supramolecular templating and their textural and structural properties were studied using powder X-ray diffraction, N₂ porosimetry, atomic force microscopy, EXAFS, XPS, and UV-VIS-NIR diffuse reflectance spectroscopy. Their acid properties were also studied by using IR spectroscopy and by the use of catalytic tests such as the decomposition of isopropanol and the isomerization of 1-butene. The materials prepared show a good degree of crystallinity with a regular ordering of the pores into a hexagonal arrangement and high thermal stability. The specific surface area of the prepared materials decreases as the zirconium content rises. Zirconium atoms are in coordination 7 to 8 and located at the surface of the pores such that a high proportion of the oxygen atoms bonded to zirconium corresponds to surface non-condensed oxygen atoms. Both facts are responsible for the acid properties of the solids that show weak Brønsted and medium strong Lewis acidity.     

Stretched polymer surfaces: Atomic force microscopy measurement of the surface deformation and surface elastic properties of stretched polyethylene

The surface structure and surface mechanical properties of low‐ and high‐density polyethylene were characterized by atomic force microscopy (AFM) as the polymers were stretched. The surfaces of both materials roughened as they were stretched. The roughening effect is attributed to deformation of nodular structures, related to bulk spherulites, at the surface. The surface‐roughening effect is completely reversible at tensile strains in the elastic regime and partially reversible at tensile strains in the plastic regime until the polymers are irreversibly drawn into fibers. AFM force versus distance interaction curves, used to measure changes in the stiffness of the surface and the surface elastic modulus as a function of elongation, show that the surfaces become softer as the polymers are drawn into fibers at high strains. At low elastic strains, however, the surface elastic modulus of HDPE increases—attributed to elastic energy stored by the amorphous regions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2263–2274, 2001     

C60表面多支化修饰聚合物的制备及其薄膜的初步研究

通过C₆₀与对甲氧基氯甲基苯在溴化钠存在下的自由基反应制备多取代的含末端羟基的C₆₀衍生物,使其与2,2-二羟甲基丙酸多步缩合反应制备C₆₀表面多支化修饰聚合物.利用凝胶渗透色谱、红外光谱、基质辅助激光解吸电离化飞行时间质谱和高分辨透射电子显微镜分析表征产物.考察了其利用LB技术成膜的可能性,并用原子力显微镜对其多层薄膜进行了初步研究.