Determination of nucleic acids with crystal violet by a resonance light-scattering technique

For the first time, Crystal Violet (CV) was used to determine nucleic acid concentrations using the resonance light-scattering (RLS) technique. Based on the enhancement of the RLS of CV by nucleic acids, a new quantitative determination method for nucleic acids in aqueous solutions has been developed. At pH 5.03 and ionic strength 0.005 mol kg-1, the interaction of CV with nucleic acids results in three characteristic RLS peaks at 344.0, 483.0 and 666.0 nm. With 4.0 x 10(-5) mol l-1 of CV, linear relationships were found between the enhanced intensity of RLS at 666.0 nm and the concentration of nucleic acids in the range 0-2.5 micrograms ml-1 for herring sperm DNA, 0-4.0 micrograms ml-1 for calf thymus DNA and 0-4.5 micrograms ml-1 for yeast RNA. The limits of determination were 13.8 ng ml-1 for herring sperm DNA, 36.8 ng ml-1 for calf thymus DNA and 69.0 ng ml-1 for yeast RNA. The assay is convenient, rapid, inexpensive and simple.     

Extractive spectrophotometric determination of tungsten(VI) in alloy steels using ethopropazine hydrochloride.

Ethopropazine hydrochloride (EPH) has been proposed as a sensitive reagent for the spectrophotometric determination of tungsten(VI). The method is based on the formation of a chloroform-soluble yellow-colored ternary complex by the interaction of EPH and thiocyanate with tungsten(V). The complex exhibits the absorption maximum at 404 nm with Sandell's sensitivity value of 20.03 ng cm-2. The complex obeyed Beer's law in the concentration range of 1-15 micrograms ml-1 with an optimum concentration range of 2.3-12.9 micrograms ml-1. The effects of foreign ions in the determination of tungsten(VI) were investigated. The method has also been successfully applied to the analysis of alloy steels.     

Sensitive fluorimetric determination of formaldehyde by the co-quenching effect of formaldehyde and sulfite on the fluorescence of tetra-substituted amino aluminium phthalocyanine

A novel and sensitive fluorimetric method was developed for the determination of formaldehyde based on the co-quenching effect of formaldehyde and sulfite on the fluorescence of tetra-substituted amino aluminium phthalocyanine. Formaldehyde in the concentration range 0.040-1.19 micrograms ml-1 can be determined with a limit of detection of 7.5 ng ml-1. The relative standard deviation for nine replicate measurements of 80.0 ng ml-1 formaldehyde is 1.8%. The method was applied to the analysis of real samples with satisfactory results.     

Indirect atomic absorption spectrometric determination of sulfate in human blood serum.

An indirect method for the determination of sulfate by atomic absorption spectrometry (AAS) is described. Sulfate forms a stable ion-association complex, [Cu(neocuproine)2]2+(SO4(2-)), in neutral medium, which can be extracted into isobutyl methyl ketone in the presence of a polar medium (methanol) with an efficiency higher than 98.0% and the extract can be analysed directly for copper (and hence indirectly for sulfate) by AAS. Measurement of the copper atomic absorption signal from the organic phase allows the indirect determination of 0.14-1.12 micrograms ml-1 of sulfate, giving a 450-fold increase in sensitivity over the conventional method of precipitation with barium. The limit of detection (3 sigma) is 3.2 ng ml-1 which is better than that of ion chromatography (0.15 micrograms ml-1). Indirect AAS allows the accurate assay of inorganic sulfate anion in biological fluids and tissues. The sulfate concentration determined by the proposed method in human blood serum (n = 6 in each instance) was 35.4-43.3 micrograms ml-1 in normal persons, 50.3-62.5 micrograms ml-1 in jaundice patients and 83.3-155.6 micrograms ml-1 in diabetic patients. A good correlation between measured sulfate and the sulfate added to blood serum was obtained.     

Spectrophotometric method for the determination of sorbic acid in various food samples with iron(III) and 2-thiobarbituric acid as reagents

A simple, rapid and accurate spectrophotometric method has been developed for the determination of sorbic acid in various food samples based on the oxidation of sorbic acid by iron(III) at 100 degrees C to malonaldehyde, which then reacts with 2-thiobarbituric acid to form a reddish brown product. The optimum experimental conditions for colour development have been assessed. Absorbance measurements were made at 529 nm in the presence of 0.4% m/V citric acid. The calibration graph was linear for 0-6 micrograms ml-1 of sorbic acid with a slope of 0.131 A micrograms-1 ml. The recoveries of sorbic acid at concentrations of 164-557 micrograms ml-1 ranged from 96 to 103%. The relative standard deviations of ten replicate determinations of sorbic acid in a synthetic cream soda sample spiked with 573 micrograms ml-1 of sorbic acid and in an onion juice sample containing 82 micrograms ml-1 of sorbic acid were 1.6 and 1.9%, respectively. Interferences from several common food additives can be minimised by extracting sorbic acid with diethyl ether and then back-extracting the acid with sodium hydrogen carbonate. The method has been applied successfully to the determination of sorbic acid in a wide range of food samples including beverages, cake, cake mate, garlic bread sprinkle, onion juice, oyster flavoured sauce and grenadine syrup.     

Extraction--spectrophotometric determination of oxalate in urine and blood serum

An extraction--spectrophotometric method is described for the determination of oxalate, based on the formation of a mixed ligand vanadium (V)--mandelohydroxamic acid--oxalate complex. The complex was extracted into a solution of trioctylmethylammonium chloride (Adogen 446) in toluene and the absorbance measured at 535 nm. The experimental variables and interferences in this determination were studied. The detection limit is 0.5 microgram ml-1 and the range of application is between 2 and 8 micrograms ml-1. The method was applied to the determination of oxalate in urine and blood serum.     

Study of the reaction of proteins with Beryllon II-AlIII by the Rayleigh light scattering technique and its application

The determination of proteins with tetrasodium 2-(3,6-disulfo-8-hydroxynaphthylazo)-1,8-dihydroxynaphthalene-3,6-disulfonate (Beryllon II) by Rayleigh light scattering (RLS) was studied. The weak RLS of the Beryllon II-bovine serum albumin (BSA) complex can be greatly enhanced by the addition of Al3+ in the pH range 5.6-7.2; there was a maximum RLS platform at 400-420 nm. Based on the reaction between Beryllon II, Al3+ and proteins, a new method for the determination of proteins was developed. This method is very sensitive [0.20-41.42 micrograms ml-1 for BSA and 0.18-48.15 micrograms ml-1 for human serum albumen (HSA)], rapid (< 2 min), simple (one step) and tolerant towards most interfering substances. The effects of different surfactants were also examined. Four samples of protein in human serum were determined; the maximum relative error was no more than 5% and the recovery was 96-105%.     

Solid-phase reactors as high stability reagent sources in flow analysis: selective flow injection spectrophotometric determination of cysteine in pharmaceutical formulations

The flow injection spectrophotometric determination of cysteine was carried out by reaction with cobalt(II) ions entrapped in a polymeric material and filling a packed-bed reactor; the released cobalt(II) complexed with the amino acid was monitored at 360 nm. The method worked with a high repeatability, even with independent reactors, days and solutions. Selectivity of the procedure was tested with twenty different foreign compounds found in pharmaceutical formulations containing cysteine, parent amino acids included; no serious interferences were observed. The calibration graph for cysteine was linear over the range 1-90 micrograms ml-1 with a relative standard deviation of 0.8% at 60 micrograms ml-1 (n = 158). The calculated sample throughput was 90 h-1. The method was applied to determine the content of cysteine in pharmaceutical formulations.     

Gas chromatographic determination of some alkoxysilanes for use in occupational exposure assessment

The manufacture and application of organosilicon compounds, especially silanes, have increased dramatically during recent decades. This has led to an increase in the number of exposed workers in different areas of industry. Therefore, there is an urgent need for an analytical method which can assess exposure to these compounds. A capillary column gas chromatographic (GC) method was developed for detecting 3-methacryloxypropyltrimethoxysilane, 3-glycidoxypropyltrimethoxysilane and 3-aminopropyltriethoxysilane. The silanes diluted in heptane were analysed by GC using flame ionisation detection. Gas chromatography-mass spectrometry was used to confirm the identity of the GC peaks. The analytical range of the method varied from 1 or 5 micrograms ml-1 to 500 micrograms ml-1 depending on the silane being studied. The detection limits were 1 microgram ml-1 for 3-methacryloxypropyltrimethoxysilane and 3-glycidoxypropyltrimethoxysilane and 5 micrograms ml-1 for 3-aminopropyltriethoxysilane. The mean recovery of silanes tested with patch samples was > 95% for all of the silanes. The repeatability of the patch sample method for silanes varied from 6.5 to 10.1%. This new GC method allows the simultaneous determination of three organosilicon compounds for occupational exposure assessment.     

Analysis of carbofuran residues in soil by the stopped-flow technique

A simple method for the determination of carbofuran by the stopped-flow technique and which is suitable for its routine analysis in soil samples is reported. The method was based on the coupling reaction between carbofuran phenol (the hydrolysis product of carbofuran) and diazotised sulphanilic acid to form a coloured compound, the rate of formation of which was monitored spectrophotometrically. The calibration graph was linear in the range 1-40 micrograms ml-1 (RSD, 2%) and the method was highly selective. The average recovery of carbofuran was 96.5% from soil, and less than 0.5 micrograms g-1 could be detected. A procedure for the resolution of propoxur - carbofuran mixtures of mass ratios in the range 5:1-1:10 with a precision of ca 3% is also described.     

A highly sensitive spectrophotometric method for the determination of some phenothiazine antipsychotics using chloramine-T and indigocarmine.

A new simple, accurate and precise spectrophotometric method for the determination of six phenothiazine drugs in pure form and in dosage forms is described. The method is based on the oxidation of the studied drugs by a known excess of Chloramine-T in hydrochloric acid medium and subsequent determination of the unreacted oxidant by reacting it with indigocarmine in the same acid medium. The reacted oxidant corresponds to the drug content. The colored species exhibits maximum absorption at 610 nm. The apparent molar absorptivity values and Sandell sensitivity values are in the range 1.53 x 10(4)-2.96 x 10(4) l mol-1 cm-1 and 13.75-37.15 ng cm-2, respectively. The method is highly sensitive and suitable for 1-15 micrograms ml-1 concentrations with the detection limits being in the range, 0.0651-0.1724 microgram ml-1. The method was successfully applied to the studied drugs in their dosage forms. The results are reproducible within +/- 1% and compare favorably with those obtained by the procedures of the British Pharmacopeia.     

Simultaneous determination of benzoic acid and saccharin in soft drinks by using lanthanide-sensitized luminescence

A simple and fast approach is used for the first time to develop a time resolved lanthanide-sensitized luminescence method for the simultaneous determination of a preservative and a sweetener, namely benzoic acid (BZ) and saccharin (SC), respectively, in food samples. The method involves the formation of the corresponding ternary chelates with terbium(III) and trioctylphosphine oxide (TOPO) in the presence of Triton X-100, and the measurement of the initial rate and equilibrium signal of this system, which were obtained in 0.1 and 5 s, respectively. The dynamic ranges of the calibration graphs, obtained by using kinetic and equilibrium measurements, were 0.2-36 micrograms ml-1 and 0.15-30 micrograms ml-1, respectively, for BZ, and 3.3-24 micrograms ml-1 and 4-36 micrograms ml-1 for SC and the detection limits were 0.07 and 0.04 microgram ml-1, respectively, for BZ, and 1.1 and 1.2 micrograms ml-1, respectively, for sodium SC. The relative standard deviation ranged between 2.3 and 3.0%. Both compounds were determined simultaneously by using a system of two equations which were resolved by using the calibration data obtained individually for each analyte and by multiple linear regression. Mixtures of BZ and SC in ratios between 3:1 and 1:9 were satisfactorily resolved by using both approaches. The method was applied to the direct analysis of several soft drinks. Analytical recoveries ranged between 89.3 and 108.5%.     

Simultaneous determination of acetylsalicylic and salicylic acids in human serum and aspirin formulations by second-derivative synchronous fluorescence spectrometry

A second-derivative synchronous scanning spectrofluorimetric method for the simultaneous determination of acetylsalicylic acid (ASA) and salicylic acid (SA) is described. The method is based on the native fluorescence of both acids in a 1% acetic acid-chloroform solution. Both ASA and SA can be determined within the concentration ranges 0.2-70 and 0.03-10 micrograms ml-1, respectively. The effect of each acid on the signal of the other has been studied in detail. Empirical equations have been used to overcome this effect, thus allowing the accurate determination of both acids in binary mixtures, without a separation step. The method has been applied to the determination of ASA and SA in blood serum and to the determination of SA impurities in aspirin formulations. Recoveries from sera spiked with both ASA (2.5-50 micrograms ml-1) and SA (100-160 micrograms ml-1) varied from 99.5 to 106.7% (mean = 102.6%) and from 93.0 to 98.0% (mean = 95.8%), respectively. Recoveries of SA from spiked aspirin solutions (0.25-1.5 mg g-1 of aspirin) varied from 98.0 to 102.0% (mean = 100.3%).     

Poly(vinyl chloride) matrix membrane electrode for the selective determination of heroin (diamorphine) in illicit powders

The potentiometric response characteristics of a poly(vinyl chloride) membrane electrode for heroin based on its ion-pair complex with tetraphenylborate were examined. The influence of pH, temperature and time on the performance of the electrode system was investigated. The electrode shows a near-Nernstian response over the heroin concentration range 10(-2)-10(-4) M with good precision. The mean relative standard deviation for the determination of heroin in 40 micrograms ml-1(-1) mg ml-1 aqueous heroin hydrochloride solutions is 1.2%. The electrode exhibits good selectivity for heroin in the presence of a number of adulterants and basic organic compounds commonly present in illicit heroin powders. The method was applied to the direct potentiometric determination of heroin in illicit powders (10-36% heroin) and the results agreed fairly well with those obtained by gas - liquid chromatography.     

Column chromatographic pre-concentration of iron(III) in alloys and biological samples with 1-nitroso-2-naphthol-3,6-disulphonate and benzyldimethyltetradecylammonium-perchlorate adsorbent supported on naphthalene using atomic absorption spectrometry

The solid ion-pair material produced from the reaction between benzyldimethyltetradecylammonium chloride (BDTA) and sodium perchlorate on naphthalene provides the basis for a simple, rapid and selective technique for pre-concentrating iron from up to 500 ml of aqueous solution. Iron reacts with disodium 1-nitroso-2-naphthol-3,6-disulphonate (Nitroso-R salt) to form a water-soluble coloured chelate anion. The iron chelate anion forms a water-insoluble, stable iron-Nitroso-R-BDTA complex on naphthalene packed in a column. Trace amounts of iron are quantitatively retained on naphthalene in the pH range 3.5-7.5 and at a flow-rate of 1-2 ml min-1. The solid mass is dissolved out from the column with 5 ml of N,N-dimethylformamide and iron is determined by means of an atomic absorption spectrometer at 248 nm. The calibration graph is linear for concentrations of iron over the range of 0.5-20 micrograms in 5 ml of final solution. The standard deviation and relative standard deviation were calculated. The detection limit of the method was 0.0196 micrograms ml-1 of iron. The sensitivity for 1% absorption was 0.072 microgram ml-1 (0.165 microgram ml-1 by direct atomic absorption spectrometry of aqueous solution). The proposed method was applied to the determination of iron in standard alloys and biological samples.     

Simultaneous determination of ascorbic acid, caffeine and paracetamol in drug formulations by differential-pulse voltammetry using a glassy carbon electrode

A simple, rapid and accurate method for the simultaneous determination of ascorbic acid, caffeine and paracetamol in drug formulations has been developed. Peak currents were measured with a glassy carbon electrode at +0.350, +0.618 and +1.425 V versus a saturated calomel electrode for ascorbic acid, paracetamol and caffeine, respectively. Perchloric acid (0.1 M) - methanol (1 + 1) was used both as a solvent and supporting electrolyte. The optimum modulation amplitude, pulse repeat time and scan rate of the polarographic analyser were found to be 50 mV, 0.5 s and 5 mV s-1, respectively and the linear calibration ranges for ascorbic acid, caffeine and paracetamol were 0-35, 0-50, and 0-55 micrograms ml-1, respectively. The relative standard deviations for 9.30 micrograms ml-1 of ascorbic acid, 8.50 micrograms ml-1 of caffeine and 7.30 micrograms ml-1 of paracetamol were 1.3, 2.5 and 0.7%, respectively. Results are reported for several commercially available drugs.     

Use of photochemical reactions in flow injection: determination of oxalate in urine

The use of photochemical reactions in flow injection (FI) is reported. The irradiation of an FI reactor with a suitable source facilitates the development of the iron(III)-oxalate reaction, allowing the amperometric determination of the anion in the range 1.0-13.0 micrograms ml-1, with a relative standard deviation of 1.1% and a sampling frequency of 40 h-1. The proposed method was applied successfully to the determination of oxalate in urine samples.     

Determination of beta-lactams and their biosynthetic intermediates in fermentation media by pre-column derivatisation followed by fluorescence detection

This paper describes a novel and sensitive pre-column derivatisation method for the detection and quantitation of beta-lactams and their biosynthetic precursors at trace levels in fermentation media. Filtered broths from fermentations of strains of Penicillium chrysogenum and Cephalosporium acremonium, after deproteination and centrifugation, were incubated with 9-fluorenylmethylchloroformate for 5 min at 20 degrees C in 0.2 M borate buffer at pH 7.7. Following two-fold pentane extraction of the reagent hydrolysis product, the aqueous layer was injected directly onto a C18 reversed-phase column, and products were detected spectrofluorimetrically with excitation and emission wavelengths of 260 and 313 nm, respectively. Detection limits of 0.01 and 0.05 micrograms ml-1 were achieved for both 6-aminopenicillanic acid (6-APA) and isopenicillin N in borate buffer and filtered fermentation broths, respectively, using a 10-microliter injection volume. A linear calibration for 6-APA in fermentation broth was obtained for a very wide concentration range (0.05-100 micrograms ml-1). Detection limits for solutions of cephalosporin C, deacetylcephalosporin C and deacetoxycephalosporin C in broth were all 0.25 micrograms ml-1. The detection limit for the beta-lactam precursor delta-(L-aminoadipyl)-L-alpha-cysteinyl-D-valine (ACV) dimer in borate buffer was 0.5 microgram ml-1. The cephalosporins and ACV dimer gave linear plots in the ranges 3-25 and 1-100 micrograms ml-1, respectively. Repeated analysis of 6-APA at a concentration of 10 micrograms ml-1 in filtered broth gave a mean peak area of 2.5.10(6) with a standard deviation of 2.6.10(5) using a 10-microliter injection volume. Ampicillin spiked into deproteinated blood serum gave a linear calibration in the concentration range 2-100 micrograms ml-1.     

Enzymic method for the spectrophotometric determination of aspartame in beverages

A sensitive spectrophotometric method for the determination of aspartame in beverages is described. The method involves the enzymic conversion of aspartame into formaldehyde by the alpha-chymotrypsin-alcohol oxidase system, followed by the formation of a chromophore with 4-aminopent-3-en-2-one. The calibration graph was linear in the range 2.0-30.0 micrograms ml-1 of aspartame. Many common ingredients of beverages do not interfere with the proposed method. The method was applied to the determination of the aspartame content of various real samples, and the results obtained were compared with those given by high-performance liquid chromatography.     

Column preconcentration of trace manganese with the ion pair of 2-nitroso-1-naphthol-4-sulfonic acid tetradecyldimethylbenzyl-ammonium chloride supported on naphthalene and determination by derivative spectrophotometry

A column preconcentration method has been developed for the determination of trace amounts of manganese by preconcentration on 2-nitroso-1-naphthol-4-sulfonic acid (nitroso-S)-tetradecyldimethylbenzylammonium (TDBA) naphthalene as an adsorbent using a simple funnel tipped glass tube. Manganese reacts with nitroso-S to form a water soluble brown colored chelate anion. The chelate anion forms a water insoluble Mn-Nitroso-S-TDBA ion pair on naphthalene packed in a column in the pH range 9.6-10.5 at a flow rate of 1-2 ml/min. The solid mass consisting of manganese complex and naphthalene is dissolved in 5 ml of dimethylformamide (DMF) and the metal determined by second derivative spectrophotometry. The calibration curve is linear in the concentration range 0.25-35.0 micrograms of Mn in 5 ml of the final DMF solution. Eight replicate determinations of 25 micrograms of standard manganese solution give a mean peak height of 4.0 with a correlation coefficient of 0.9995 and relative standard deviation of +/- 1.1%. The sensitivity was calculated to be 0.502(d2 A/d lambda 2)/microgram ml-1 from the slope of the calibration curve. The detection limit was 0.020 microgram ml-1 for manganese at the minimum instrumental settings (signal to noise ratio = 2). Various parameters effecting the method such as the effect of pH, volume of aqueous phase and interference of a number of metal ions on the determination of manganese have been evaluated to optimize the conditions for its determination in standard alloys and biological samples.