Design and Synthesis of Isocyanide Ligands for Catalysis: Application to Rh‐Catalyzed Hydrosilylation of Ketones

New isocyanide ligands with meta‐terphenyl backbones were synthesized. 2,6‐Bis[3,5‐bis(trimethylsilyl)phenyl]‐4‐methylphenyl isocyanide exhibited the highest rate acceleration in rhodium‐catalyzed hydrosilylation among other isocyanide and phosphine ligands tested in this study. ¹H NMR spectroscopic studies on the coordination behavior of the new ligands to [Rh(cod)₂]BF₄ indicated that 2,6‐bis[3,5‐bis(trimethylsilyl)phenyl]‐4‐methylphenyl isocyanide exclusively forms the biscoordinated rhodium–isocyanide complex, whereas less sterically demanding isocyanide ligands predominantly form tetracoordinated rhodium–isocyanide complexes. FTIR and ¹³C NMR spectroscopic studies on the hydrosilylation reaction mixture with the rhodium–isocyanide catalyst showed that the major catalytic species responsible for the hydrosilylation activity is the Rh complex coordinated with the isocyanide ligand. DFT calculations of model compounds revealed the higher affinity of isocyanides for rhodium relative to phosphines. The combined effect of high ligand affinity for the rhodium atom and the bulkiness of the ligand, which facilitates the formation of a catalytically active, monoisocyanide–rhodium species, is proposed to account for the catalytic efficiency of the rhodium–bulky isocyanide system in hydrosilylation.     

Synthesis of rhodium N-heterocyclic carbene complexes and their catalytic activity in the hydrosilylation of alkenes in ionic liquid medium

Rhodium complexes bearing N-heterocyclic carbene (NHC) ligands were prepared from bis(η⁴-1,5-cyclooctadiene) dichlorodirhodium and 1-alkyl-3-methylimidazolium-2-carboxylate, and the catalytic properties of rhodium complexes prepared in the hydrosilylation of alkenes in ionic liquid media were investigated. It was found that both the catalytic activity and selectivity of the rhodium complexes bearing NHC ligands were influenced by the attached substituents of the imidazolium cation. Additionally, rhodium complexes bearing NHC ligands in ionic liquid BMimPF₆ could be reused without noticeable loss of catalytic activity and selectivity.     

Homogeneous catalysis: VI. Hydrosilylation using tris(pentanedionato)rhodium(III) or tetrakis(μ-acetato)dirhodium(II) as catalyst

The catalytic activity of tris(pentanedionato)rhodium(III), (or rhodium(III) acetylacetonate) (I) has been investigated for the hydrosilylation of a variety of organic substrates: alkenes, terminal or internal acetylenes, conjugated dienes, or α,β-unsaturated carbonyls or nitriles. With PhCHCH₂ or PhCH₂CHCH₂, ω-substitution was unexpectedly observed, as well as addition. Compound I is an active hydrosilylation catalyst in the absence of any added reducing agent, as is tetrakis(μ-acetato)dirhodium(II) (II) which does not, however, show any unusual catalytic activity due to the two metal atom cluster. Possible mechanisms are suggested.     

Synthesis of novel poly(ethylene glycol)‐containing imidazolium‐functionalized phosphine ligands and their application in the hydrosilylation of olefins

A series of polyethylene glycol‐containing imidazolium‐functionalized phosphine ligands (mPEG‐im‐PPh₂) were successfully synthesized and used in the rhodium‐catalyzed hydrosilylation of olefins. The results indicate that the RhCl₃/mPEG‐im‐PPh₂ catalytic system exhibits both excellent activity and selectivity for the β‐adduct. In addition, the catalytic system may be recycled at least six times.     

Effect of triarylphosphane ligands on the rhodium‐catalyzed hydrosilylation of alkene

A series of triarylphosphanes ( 1a , 2a , 3a , 4a , 5a , 6a , 7a , 8a , 9a , 10a , 11a ) have been synthesized. An X‐ray crystal structure analysis of (2‐bromophenyl)diphenylphosphane ( 1a ) unambiguously confirmed the constitution of the functionalized phosphane. The hydrosilylation reaction of styrene with triethoxysilane catalyzed with RhCl₃/triarylphosphane was studied. In comparison with the classic Wilkinson's catalyst, rhodium complexes with functionalized triarylphosphane ligands are characterized by a very high catalytic effectiveness for the hydrosilylation of alkene. Among these catalysts tested, RhCl₃/diphenyl(2‐(trimethylsilyl)phenyl)phosphane ( 8a ) exhibited excellent catalytic properties. Using this silicon‐containing phosphane ligand for the rhodium‐catalyzed hydrosilylation of styrene, both higher conversion of alkene and higher β‐adduct selectivity were obtained than with Wilkinson's catalyst. Copyright © 2014 John Wiley & Sons, Ltd.     

SYNTHESIS AND CATALYTIC BEHAVIOR OF POLYSILOXANESUPPORTED FULLERENE PLATINUM OR RHODIUM COMPLEXES*

Two polysiloxanes with pendant fullerene moieties and their platinum or rhodium complexes havebeen prepared from C_(60) via amination with ω-decenylamine, followed by hydrosilylation with triethoxysilaneand immobilization on fumed silica or by hydrosilylation with methyldichlorosilane and polycondensationwith polydimethylsiloxanol, and then by reacting them with potassium chloroplatinite or rhodium chloride inacetone respectively under argon atmosphere. It was found that the four noble metal complexes are effectivecatalysts for the hydrosilylation of olefins with triethoxysilane. The regioselcctivity of platinum complexesfor styrene increases remarkably by introducing C_(60) moiety. Factors influencing catalytic activity and themechanism have been investigated.     

Catalysis of hydrosilylation by well-defined rhodium siloxide complexes immobilized on silica

Rhodium surface siloxide complexes were prepared directly by condensation of the molecular precursors ([{Rh(μ-OSiMe₃)(cod)}₂], [{Rh(μ-OSiMe₃)(tfb)}₂], [{Rh(μ-OSiMe₃)(nbd)}₂]) with silanol groups on silica surface (Aerosil 200 and SBA-15) and their structures were characterized by ¹³C and ²⁹Si CP/MAS NMR spectroscopy. Such single-site complexes were tested for their activity in hydrosilylation of carbon–carbon double bonds with triethoxysilane, heptamethyltrisiloxane and poly(hydro,methyl)(dimethyl)siloxane. The best catalyst appeared to be cyclooctadiene ligand-containing rhodium siloxide complex immobilized on Aerosil which was recycled as many as 20 times without loss of activity and selectivity in hydrosilylation of vinylheptamethyltrisiloxane with heptamethyltrisiloxane. On the ground of CP/MAS NMR measurements it was established that the mechanism of hydrosilylation catalyzed by silica-supported rhodium siloxide complexes is different from that for the complexes in the homogeneous system.     

Chemical assembling of silica surface using a reaction of catalytic hydrosilylation

Chemical assembling of the silica surface modified by dimethylchlorosilane was performed by the catalytic hydrosilylation of 1,3-divinyl-1,1,3,3-tetramethyldisiloxane, α-methyl styrene, acetophenone, allyl butyl and allyl glycidyl ethers with dimethylchlorosilane. The effect of the nature of complexes of platinum, palladium, rhodium and ruthenium on the parameters of hydrosilylation was studied. It was shown that the maximum rate of hydrosilylation was observed in the reaction with allyl glycidyl ether, and minimum, with α-methylstyrene; the most effective catalyst of hydrosilylation was [Rh(CO)₂(acac)].     

Rhodium complexes of PCNHCP: Oxidative addition of dichloromethane and catalytic hydrosilylation of alkynes affording (E)-alkenylsilanes

New rhodium complexes of PC^NHCP have been synthesized by using the silver transfer reagent, [Ag₃(PC^NHCP)₂Cl]Cl₂ (2). In the reaction between 2 and [Rh(COD)Cl]₂ in dichloromethane, the presumably formed nucleophilic Rh^I(PC^NHCP)Cl intermediate (A), undergoes a C–Cl bond activation of CH₂Cl₂ giving cis,mer-Rh^III(PC^NHCP)(CH₂Cl)Cl₂ (3) as the final product. Attempts to isolate A affords the oxidative degradation product of mer-Rh^III(PC^NHCP)Cl₃ complex (4). In contrast, the rhodium(I) center in Rh(PC^NHCP)(CO)Cl (5) is stabilized by the π-back bonding of CO ligand; a robust complex is, therefore, obtained. The solid-state structures of 2 and 3 were determined by X-ray diffraction. Complexes 3–5 are catalyst precursors for efficient, chemoselective hydrosilylation of alkynes. For the reaction between phenylacetylene and dimethylphenylsilane, a rapid hydrosilylation occurs, producing isomers of alkenylsilanes; then a slow isomerization pathway converts (Z)-alkenylsilane to its (E)-isomer. For 3, under catalytic condition, a facile reductive elimination of dichloromethane giving A is anticipated. The similarity in reactivity and selectivity between 3, 4 and 5 suggests the involvement of A as the active species in a common catalytic cycle.     

Hydrogen: a good partner for rhodium‐catalyzed hydrosilylation

The influence of hydrogen pressure on the hydrosilylation of ketones catalyzed by [((S)‐SYNPHOS)Rh(nbd)]OTf has been studied. We have notably demonstrated that hydrogen significantly affected the outcome of the reaction while not being consumed as stoichiometric reducing agent. In THF, diethyl ether or toluene, the hydrogen pressure exceedingly accelerated the hydrosilylation reaction and preserved or even improved the enantioselectivity of the process. In CH₂Cl₂, the rhodium catalyst also showed generally higher catalytic activity under hydrogen pressure. Most serendipitously, several ketones were found to give products of absolute opposite configuration upon performing the hydrosilylation under argon atmosphere or under hydrogen pressure. Copyright © 2014 John Wiley & Sons, Ltd.     

Base Metal-terpyridine Complex Immobilized on Stationary Phase Aimed as Reusable Hydrosilylation Catalyst

The catalytic activity of a base metal-terpyridine complex immobilized on silica gel ( M(tpy)X₂@SiO₂/H₂O : M=Mn, Fe, Co, Ni, Cu; X=Cl, Br) for hydrosilylation was investigated. Co(tpy)Br₂@SiO₂/H₂O in the presence of NaBHEt₃ exhibited the highest catalytic activity for hydrosilylation of 1-octene with diphenylsilane (Ph₂SiH₂) to form the anti-Markovnikov-type hydrosilylation compound as the main product. The reusability of Co(tpy)Br₂@SiO₂/H₂O activated by NaBHEt₃ was examined. It was found that the catalytic activity decreased with repeated use because of the peeling off of the Co complex anchor portion from the silica gel surface upon the attack of NaBHEt₃. The introduction of Co(OAc)₂ instead of CoBr₂ to silica gel formed Co(tpy)(OAc)₂- and Co(tpy)(OH)₂-immobilized silica gel, which exhibited catalytic activity for the hydrosilylation in the absence of an activator such as NaBHEt₃. The glassware in which Co(tpy)(OH)₂ was immobilized on the inner wall was prepared. It was found that the hydrosilylation catalytically occurred on the surface of a pretreated glassware and that the catalytic activity did not decrease even after 10 repeated uses.     

Modification of (Poly)Siloxanes via Hydrosilylation Catalyzed by Rhodium Complex in Ionic Liquids

Summary. The hydrosilylation of 1-heptene, allyl glycidyl ether and, allyl polyether by heptamethylhydrotrisiloxane and poly(hydro, methyl)(dimethyl)siloxane catalyzed by rhodium(I) complexes (particularly [{Rh(μ–OSiMe₃)(cod)}₂]) in imidazolium ionic liquids (especially [TriMIM]MeSO₄) gives heptyl and glycidyloxy functional (poly)siloxanes and silicone polyethers with high yield and selectivity. The catalytic system based on rhodium siloxide can be easily separated from the product and successfully reused up to five times.     

Modification of (Poly)Siloxanes via Hydrosilylation Catalyzed by Rhodium Complex in Ionic Liquids

The hydrosilylation of 1-heptene, allyl glycidyl ether and, allyl polyether by heptamethylhydrotrisiloxane and poly(hydro, methyl)(dimethyl)siloxane catalyzed by rhodium(I) complexes (particularly [{Rh(μ–OSiMe₃)(cod)}₂]) in imidazolium ionic liquids (especially [TriMIM]MeSO₄) gives heptyl and glycidyloxy functional (poly)siloxanes and silicone polyethers with high yield and selectivity. The catalytic system based on rhodium siloxide can be easily separated from the product and successfully reused up to five times.     

Catalytic Hydrosilylation of Substituted Acetophenones by 1,1,3,3-Tetrametyldisiloxane with Complexes Rhodium (I) and Platinum (II)

The hydrosilylation of a range of para-substituted acetophenones XC₆H₄COCH₃ (X = H, Me, MeO, F, Cl, NO₂) with 1,1,3,3-tetramethyl disiloxane mediated by complexes of rhodium (I) and platinum (II) was investigated. The complexes of platinum (II) are less effective than complexes of rhodium (I), but display greater selectivity. Six 1-(1′-arylethoxy)-1,1,3,3-tetramethyl disiloxanes have been synthesized by hydrosilylation using several coupling catalysts.     

Synthesis of dialkoxydiphenylsilanes via the rhodium-catalyzed hydrosilylation of aldehydes

The commercially available rhodium(I) complex [RhCl(CO)₂]₂ (1) was shown to be an effective catalyst for the reduction of carbonyls with organosilanes under mild conditions. This study focusses on the hydrosilylation of aldehydes with diphenylsilane leading to the isolation of a series of dialkoxydiphenylsilanes with low catalytic loading of complex 1.     

Purine-based carbenes at rhodium and iridium

Purine-based carbenes can be attached to catalysis-related metals like rhodium and iridium through the standard method of in situ deprotonation of the respective azolium salts. Thus, 1,3,7,9-tetramethylxanthinium tetrafluoroborate is obtained by the reaction of trimethyloxonium tetrafluoroborate and caffeine. The salt and 7,9-dimethylhypoxanthinium iodide were used as a consecutive precursor to form rhodium (I) and iridium (I) carbene complexes of the type [M(L)(L_Carbene)₂]I and M(L)(L_Carbene)(I) (M = Rh, Ir, L_Carbene = 1,3,7,9-tetramethylxanthine-8-ylidene, 7,9-dimethylhypoxanthine-8-ylidene, L = η⁴-1,5-COD, CO) (COD = 1,5-cyclooctadiene). All compounds were characterized by ¹H NMR, ¹³C NMR, mass spectrometry and/or elemental analysis.     

Phosphorus Ligands with a Large Cavity: Synthesis of Triethynylphosphines with Bulky End Caps and Application to the Rhodium‐Catalyzed Hydrosilylation of Ketones

Trialkynylphosphines substituted with bulky triarylsilyl groups at the alkyne termini were synthesized. The new phosphines P(C?CSiAr₃)₃ (Ar=3,5‐tBu₂‐4‐MeOC₆H₂, 3,5‐(Me₃Si)₂C₆H₃) are uncrowded near the phosphorus atom but bulky in the distal region. As a result, they contain a large cavity, at the bottom of which the phosphine lone‐pair electrons are located. The compounds are stable to oxidation by air and hydrolysis. DFT calculations suggested that the triethynylphosphines are good π‐acceptor ligands, comparable with P(OAr)₃. The trialkynylphosphines reacted with [{RhCl(cod)}₂] (P/Rh=1.1:1) to give selectively the monophosphine–rhodium complex [RhCl(cod)P(C?CSiAr₃)₃]. X‐ray crystal‐structure analysis revealed that the {RhCl(cod)} fragment is fully accommodated by the cavity of the phosphine ligand. Compared to the effect of analogues with smaller end caps and PPh₃, the trialkynylphosphines accelerated markedly the rhodium‐catalyzed hydrosilylation of ketones with a triorganosilane. It is proposed that the higher catalytic activity observed with the holey phosphines is a result of the preferential formation of a monophosphine–rhodium species.     

Synthesis, characterization, and catalytic application of a new chiral P,N-indene ligand derived from (R)-BINOL

Lithiation of 2-dimethylaminoindene followed by quenching with [(R)-(1,1′-binaphthalene-2,2′-diyl)]chlorophosphite and treatment with triethylamine afforded the crystallographically characterized enantiopure P,N-indene 3 in 71% isolated yield. In the course of rhodium coordination chemistry studies involving 3, the formation of the isolable complex [(κ²-P,N-3)(κ¹-P,N-3)RhCl] (7) (81%) was observed, thereby confirming the propensity of this new ligand to form L_nRh(3)₂ complexes. Such coordination chemistry behavior may contribute in part to the generally poor catalytic performance exhibited by mixtures of 3 and rhodium precursor complexes in the asymmetric hydrogenation and hydrosilylation studies described herein.     

The catalytic activity of alkali metal alkoxides and titanium alkoxides in the hydrosilylation of unfunctionalized olefins

The catalytic activities of titanium alkoxides and alkali metal alkoxides for hydrosilylation of unfunctionalized olefins have been studied. Titanium(IV) alkoxides showed excellent catalytic activity, while alkali metal alkoxides have low catalytic activity for the hydrosilylation of olefins. However, by using titanocene dichloride as an additive, alkali metal alkoxides showed also excellent catalytic property for hydrosilylation. In comparison with titanium alkoxides, no α-adduct was obtained by using alkali metal alkoxides/Cp₂TiCl₂ as catalysts.     

Catalytic activity of homogeneous and silica-anchored rhodium complexes

Using recently synthesized [1] (C₂H₅O)₃Si(CH₂)₃CH(COCH₃)₂ (1) and (CH₃O)₃Si(CH₂)₂–Py (2) (Py=2-pyridyl), a series of homogeneous and silica-anchored rhodium carbonyl complexes were prepared. Their catalytic performance was studied in hydrogenation, hydrosilylation and methanol carbonylation.