Determination of vitamin B<Subscript>12</Subscript> using a chemiluminescence flow system

A method to determine vitamin B₁₂ by measuring the chemiluminescence (CL) intensities using a flow injection (FI) system has been proposed. It is based on the catalytic effect of cobalt(II) in vitamin B₁₂ on the CL reaction between luminol and hydrogen peroxide in a basic medium. The increment of the CL intensity is proportional to the concentration of vitamin B₁₂ in the range 8.68–86.9 ng/mL (r ² = 0.9984) with a detection limit (3σ) of 0.89 ng/mL. The CL response is obtained in 10 s at a flow rate of 3.0 mL/min with a relative standard deviation (RSD) of less than 2.5% (n = 6). The method has been successfully applied to the determination of vitamin B₁₂ in pharmaceutical injections. The text was submitted by the authors in English.     

Dosage de traces de vitamines B12

An indirect determination of traces of vitamin B₁₂ is proposed; the vitamin is decomposed and the liberated cobalt is determined colorimetrically with Nitroso-R salt. 5–10 μg of B₁₂ can be determined. The use of tracers and internal standards decreases the error to less than 6%. Before the decomposition of the B₁₂ all traces of ionic cobalt are removed by means of an ion-exchange resin. The method is very sensitive and fairly selective; only homologues of B₁₂ containing cobalt interfere. B₁₂ can be determined in many pharmaceutical products.     

Indirect Determination of Organic Compounds by Atomic Absorption Spectrophotometry: The Study of Vitamin B12 in Pharmaceutical Dosage Forms

Abstract

A method for the determination of vitamin B₁₂ in pharmaceutical dosage forms is presented. The method involves, dissolution of the vitamin B₁₂ and subsequent determination of the complexed cobalt by atomic absorption spectrophotometry. The method is both rapid and sensitive giving applications to quality, control of this type of formulation.     

Determination of B-group vitamins in Turkish honey using ultra-performance liquid chromatography with electrospray ionization coupled to tandem mass spectrometry

A rapid and sensitive ultra-performance liquid chromatography–tandem mass spectrometry method with electrospray ionization (UPLC–ESI–MS/MS) for analysis of B-group vitamins in honey has been presented. Aim of this study is the characterization of different types of Turkish honeys according to B-group vitamins. Vitamins were determined in 17 different types of Turkish honey samples by UPLC–ESI–MS/MS. Heather honey samples were distinguished among the studied honeys with the richest vitamin content with 286.10?mg/kg, and it is followed by sunflower honey and thyme honey with the total vitamin contents of 206.01 and 163.27?mg/kg, respectively. The presence of vitamin B₁ (thiamine), vitamin B₂ (riboflavin), vitamin B₃ (nicotinamide, B₃N and nicotinic acid, B₃H), vitamin B₆ (pyridoxine), and vitamin B₉ (folic acid) was detected in all the honey samples analyzed. Moreover, vitamin B₅ (pantothenic acid) was observed in most of them. Vitamin B₁₂ (cyanocobalamin) and vitamin B₇ (biotine) were not detected in the studied honey samples. Turkish honey samples showed efficacious vitamin content for the consumers.     

Determination of Cobalt in the Form of an Ion Associate in Vitamin B<Subscript>12</Subscript>

The possibility of application of the ion-associated complex formed between the anionic chelate cobalt(II)-4-(2-thiazolylazo) resorcinol (TAR) with the cation of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) for extraction-spectrophotometric determination of cobalt in the form of an ion associate in Vitamin B₁₂ was studied. The liquid–liquid extraction system Co(II)-TAR-MTT-H₂O-CHCl₃ was applied. This system was chosen by our previous research of the ion associates of the cobalt by spectrophotometric investigation of fourteen different liquid–liquid extraction systems, containing azo derivatives of resorcinol (TAR or 4-(2-pyridylazo) resorcinol (PAR)) and mono or ditetrazolium salts. Based on the obtained results, a sensitive, relatively simple, convenient and inexpensive method for determination of cobalt in the form of an ion associate in Vitamin B₁₂ was developed. The proposed method can be implemented for biological, medical and pharmaceutical samples containing cobalamin (Vitamin B₁₂).     

Determination of vitamin B12 in pharmaceutical preparations by a highly sensitive fluorimetric method

A fluorimetric method for the determination of vitamin B₁₂ has been developed. The fluorescence emission was measured at λ_ex/λ_em275/305 nm in phosphate buffer solution (pH 7.0), and the experimental variables and possible interference were studied. The linear calibration range was 1.000 ng/mL to 100.0 ng/mL with a correlation coefficient of 0.9994 and a detection limit of 0.1 ng/mL. The method is rapid, simple and highly sensitive. It was used to determine vitamin B₁₂ in pharmaceutical preparations. The recovery was 96%–98% and the relative standard deviation was in the range of 1.8%–2.7%. The results agreed with those obtained by spectrophotometry. Received: 17 July 2000 / Revised: 4 September 2000 / Accepted: 7 September 2000     

Fragmentation of vitamin B12 in aerosol matrix-assisted laser desorption ionization

Aerosol matrix-assisted laser desorption ionization (MALDI) with a reflection time-of-flight mass spectrometer was used to study fragmentation of vitamin B₁₂. Six MALDI matrices were used: 2,5-di-hydroxy benzoic acid (gentisic acid), 4-nitroaniline, 3,5-dimethoxy-4-hydroxy cinnamic acid (sinapic acid), 3,4-di-hydroxy cinnamic acid (caffeic acid), trans-4-hydroxy-3-methoxy cinnamic acid (ferulic acid), and α-cyano-4-hydroxy cinnamic acid (4-HCCA). Mass spectra were obtained with a 355-nm pulsed Nd:YAG laser at irradiances between 0. 1 and 5 GW/cm² (between 3- and 150-mJ pulse energy). Loss of CN was a major product of prompt ion source fragmentation and the ratio of fragmented to intact analyte was found to be strongly dependent on matrix and weakly dependent on laser irradiance. Additionally, free cobalt ions and cobalt ions bound to small methanol clusters were observed in the mass spectra. The cobalt removal from the corrin ring of vitamin B₁₂ results from direct photon absorption by vitamin B₁₂, but is enhanced by the presence of matrix.     

On-line preconcentration and determination of cobalt by chelating microcolumns and flow injection atomic spectrometry

A simple and sensitive flow injection analysis-atomic absorption spectrometric procedure is described for the determination of cobalt. The method is based upon on-line preconcentration of cobalt on a microcolumn of 2-nitroso-1-naphthol immobilized on surfactant coated alumina. The trapped cobalt is then eluted with ethanol (250 μl) and determined by flame atomic absorption spectrometry. The analytical figures of merit for the determination of cobalt are as follows: detection limit (3 S), 0.02 ng ml⁻¹; precision (RSD), 2.8% for 20 ng ml⁻¹ and 1.7% for 70 ng ml⁻¹ of cobalt; enrichment factor, 125 (using 25 ml of sample). The method has been applied to the determination of cobalt in water samples, vitamin B₁₂ and B-complex ampoules and accuracy was assessed through recovery experiment and independent analysis by furnace AAS.     

Determination of Vitamin B12 in Multivitamin Tablets by High Performance Liquid Chromatography

Abstract

Two procedures for separation and determination of vitamin B₁₂ in multivitamin tablets by reversed phase high performance liquid chromatography are proposed. Sample preparation is very simple: tablets are dissolved in distilled water, centrifuged and filtered. The sample solution is directly applied in the sample loop injector and chromatograms are obtained with gradient elution using water-methanol and water-acetonitrile as solvents. The peak of vitamin B₁₂ from samples of B-complex tablets is well separated with the two procedures. For multivitamin tablets, however, only the procedure with water and methanol as solvents was good for separation and quantification of vitamin B₁₂. Both procedures were verified by the standard addition method and also compared to a previously developed method using electrothermal atomic absorption spectrometry for vitamin B₁₂ determination.     

Chemiluminescence determination of vitamin B12 by a flow-injection method

Chemiluminescence analysis with flow injection was used for the determination of vitamin B₁₂ by means of the luminol-hydrogen peroxide system. The linear range is three orders of magnitude and the detection limit is 1 ng for 50-μ1 samples injected. The results were compared with those obtained by a spectrophotometric method.     

Dipstick based immunochemiluminescence biosensor for the analysis of vitamin B12 in energy drinks: A novel approach

In this article, we describe a dipstick based immunochemiluminescence (immuno-CL) biosensor for the detection of vitamin B₁₂ in energy drinks. The method is a direct competitive type format involving the immobilization of vitamin B₁₂ antibody on nitrocellulose membrane (NC) followed by treatment with vitamin B₁₂ and vitamin B₁₂–alkaline phosphatase conjugate to facilitate the competitive binding. The dipstick was further treated with substrate disodium 2-chloro-5-(4-methoxyspiro {1,2-dioxetane-3,2¢-(5¢-chloro)tricyclo[3.3.1.13,7]decan}-4-yl)-1-phenyl phosphate (CDP-Star) to generate chemiluminescence (CL). The number of photons generated was inversely proportional to the vitamin B₁₂ concentration. After systematic optimization, the limit of detection was 1 ng mL⁻¹. The coefficient of variation was below 0.2% for both intra- and inter-assay precision. Vitamin B₁₂ was extracted from energy drinks with recovery ranged from 90 to 99.4%. Two different energy drinks samples were analyzed, and a good correlation was observed when the data were compared with a reference enzyme linked immuno sorbent assay (ELISA) method. The developed method is suitable for an accurate, sensitive, and high-throughput screening of vitamin B₁₂ in energy drinks samples. The dipstick technique based on immuno-CL is suitable for the detection of several analyte in food and environmental samples.     

Ultrasensitive Determination of Vitamin B12 Using Disposable Graphite Screen‐Printed Electrodes and Anodic Adsorptive Voltammetry

A facile, rapid and ultra‐sensitive method for the determination of vitamin B₁₂ (cyanocobalamin) at the sub‐nanomolar concentration range by using low‐cost, disposable graphite screen‐printed electrodes is described. The method is based on the cathodic preconcentration of square planar vitamin B_12s, as occurred due to the electro reduction of Co(III) center in vitamin B_12a to Co(I), at ?1.3 V versus Ag/AgCl/3 M KCl for 40 s. Then, an anodic square wave scan was applied and the height of the peak appeared at ca. ?0.73 V versus Ag/AgCl/3 M KCl, due to the oxidation of Co(I) to Co(II) in the adsorbed molecule, was related to the concentration of the vitamin B₁₂ in the sample. EDTA was found to serve as a key‐component of the electrolyte by eliminating the background signal caused by metal cations impurities contained in the electrolyte (0.1 M phosphate buffer in 0.1 M KCl, pH 3). It also blocks trace metals contained in real samples, thus eliminating their interference effect. The method was optimized to various working parameters and under the selected conditions the calibration curve was linear over the range 1×10^?10–8×10^?9 mol L^?1 vitamin B₁₂ (R²=0.994), while the limit of detection for a signal‐to‐noise ratio of 3 (7×10^?11 mol L^?1 vitamin B₁₂) is the lowest value of any reported in the literature for the electrochemical determination of vitamin B₁₂. The sensors were successfully applied to the determination of vitamin B₁₂ in pharmaceutical products.     

Chemiluminescent Determination of Vitamin B12 Using Charge Coupled Device (CCD)

A method was developed for the determination of vitamin B₁₂ based on the enhancement of cobalt (II) on the chemiluminescence (CL) reaction between luminol and percarbonate (powerful source of hydrogen peroxide). The release of cobalt (II) from the vitamin B₁₂ was reached by a simple and fast microwave digestion (20 s microwave digestion time and a mix of nitric acid and hydrogen peroxide). A charge coupled device (CCD) photodetector, directly connected to the cell, coupled with a simple continuous flow system was used to obtain the full spectral characteristics of cobalt (II) catalyzed luminol-percarbonate reaction.

The optima experimental conditions were established: 8.0 m mol L^?1 luminol in a 0.075 mol L^?1 carbonate buffer (pH 10.0) and 0.15 mol L^?1 sodium percarbonate, in addition to others experimental parameters as 0.33 mL s^?1 flow rate and 2 s integration time, were the experimental conditions which proportionate the optimum CL emission intensity. The emission data were best fitted with a second-order calibration graph over the cobalt (II) concentration range from 4.00 to 300 µ g L^?1 (r² = 0.9990), with a detection limit of 0.42 µ g L^?1. The proposed method was successfully applied to the determination of vitamin B₁₂ in pharmaceuticals.     

Quantum chemical study of the effects of interaction of polyhydrated Hg(II) with methylcobalamin — A derivative of vitamin B<Subscript>12</Subscript>

Quantum chemical methods were used to investigate the mechanism of interaction of polyhydrated Hg(II) with methylcobalamin — a derivative of vitamin B₁₂. Migration of the methyl group in the B₁₂·Hg(II) nH₂O cluster, initiating the formation of methylmercury, is considered. The reaction of substitution of methylmercury for the cobalt atom in the corrin fragment of B₁₂ has been studied. The thermodynamic and activation characteristics of these processes have been obtained. The mercury analog of vitamin B₁₂ is shown to exist in two radically different conformations.     

Features of laser desorption/ionization mass spectrometry fragmentation of vitamin B<Subscript>12</Subscript>

A comparative analysis of the laser desorption/ionization of vitamin B₁₂ by matrix-assisted laser desorption/ionization (MALDI) and desorption/ionization on porous silicon (DIOS) was carried out. The mass spectra obtained were interpreted and the pathways for ion formation and decomposition were established. The MALDI fragmentation of the positive vitamin B₁₂ ions is more extensive than the DIOS fragmentation. The most extensive fragmentation was found using the MALDI method for negative vitamin B₁₂ ions, which are lacking when using the DIOS method. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 4, pp. 251–256, July–August, 2007.     

Liquid chromatography of vitamin B6 with electrochemical detection using a carbon fibre electrode

A flow-through electrochemical detector with a carbon fibre electrode was fabricated. A chromatographic method for the determination of vitamin B₆ using this detector is described, and the results are compared with those obtained by detection with a thin-layer glassy carbon electrode or spectrophotometry. The detection limit of vitamin B₆ is 2.5 ng for pyridoxine, 1 ng for pyridoxal and 1 ng for pyridoxamine. The technique was applied to the determination of vitamin B₆ in tablets.     

Optimization of sample preparation using statistical methods: spectrophotometric determination of Fe and Co in pharmaceutical samples

This work presents alternatives for Fe and Co determination in pharmaceutical samples using flow analysis. The first procedure describes Fe extraction in mineral/vitamin complexes. The best conditions were reached when HNO₃ concentration and volume, sample mass and shaking time were 1.0 mol l⁻¹, 5 ml, 25 mg and 10 min. Three mineral/vitamin complexes of known concentrations (ranging from 12 to 32 g kg⁻¹) were analyzed (10 authentic replicates for each) and recoveries of around 100% were obtained when compared with a well-established mineralization procedure employing concentrated HNO₃ and H₂O₂ (30% w/v). The second work part shows the employment of Tiron and H₂O₂ reaction for Co determination in a drug for inappetence. The results (352±18.7 mg kg⁻¹) were compared with those using Electrothermal Atomic Absorption Spectrometry—ETAAS (346±15.7 mg kg⁻¹). The proposed method showed detection and quantification limits of 0.20 and 0.70 μg l⁻¹, respectively. Both procedures for Fe and Co determination presented time, reagent and effort reduction.     

B<Subscript>12</Subscript>-induced formation of stishovite in sol–gel produced amorphous SiO<Subscript>2</Subscript> matrices

Composites containing vitamin B₁₂ (cyanocobalamin) dispersed in amorphous silica xerogel were studied structurally as a function of annealing temperature. Silica xerogel samples were prepared by the sol–gel method using an ethanol:H₂O:TEOS molar ratio of 4:11.6:1 and loaded with cyanocobalamin. We found that the structure of the cobalamin is unaltered, although decoordination of the benzimidazole nucleobase of B₁₂, whereas the amorphous quartz structure of the matrix is maintained under heat-treatment without low-cristobalite phase transformation, typically of this kind of materials. We found in our samples partial crystallization of the glass matrix in form of stishovite obtained at very lower pressure than those specified by the phase diagram, and temperatures about 400 °C due to the presence of vitamin B₁₂. The presence of stishovite is corroborated by the Rietveld refinement method.     

A new liquid membrane electrode for determination of vitamin B1 in multivitamin preparations

Summary A new liquid membrane electrode was developed which is highly selective and sensitive for vitamin B₁. It is based on the thiamine-picrolonate ion-pair complex as an electroactive material in nitrobenzene solvent. The electrode has a remarkable selectivity for vitamin B₁ in the presence of vitamins B₂, B₆, B₁₂ and nicotinamide. The results obtained for the determination of vitamin B₁ in various multivitamin preparations at levels as low as 1 g/ml show an average recovery of 98% (mean standard deviation 1.8%) and are favourably compared with those obtained by the official methods.

---

Neue Flüssig-Membranelektrode zur Bestimmung von Vitamin B₁ in Multivitaminpräparaten

Zusammenfassung Eine neue, für Vitamin B₁ hochselektive Flüssig-Membranelektrode wurde entwickelt. Sie beruht auf dem Thiamin-Picrolonat-Ionenpaarkomplex als elektroaktives Material im Lösungsmittel Nitrobenzol. Die Elektrode besitzt eine beachtliche Selektivität für Vitamin B₁ in Gegenwart der Vitamine B₂, B₆, B₁₂ und Nicotinamid. Bei Bestimmungen in verschiedenen Multivitaminpräparaten mit Konzentrationen bis herab zu 1 g/ml erhielt man eine durchschnittliche Wiederfindung von 98% (mittlere Standardabweichung 1,8%). Die erhaltenen Resultate zeigen gute Übereinstimmung mit den nach amtlichen Methoden erhaltenen Werten.

     

Solution,Crystal and in Silico Structures of the Organometallic Vitamin B12-Derivative Acetylcobalamin and of its Novel Rhodium-Analogue Acetylrhodibalamin

The natural vitamin B₁₂-derivatives are intriguing complexes of cobalt that entrap the metal within the strikingly skewed and ring-contracted corrin ligand. Here, we describe the synthesis of the Rh(III)-corrin acetylrhodibalamin ( AcRhbl ) from biotechnologically produced metal-free hydrogenobyric acid and analyze the effect of the replacement of the cobalt-center of the organometallic vitamin B₁₂-derivative acetylcobalamin ( AcCbl ) with its group-IX homologue rhodium, to give AcRhbl . The structures of AcCbl and AcRhbl were thoroughly analyzed in aqueous solution, in crystals and by in silico methods, in order to gain detailed insights into the structural adaptations to the two homologous metals. Indeed, the common, nucleotide-appended corrin-ligand in these two metal corrins features extensive structural similarity. Thus, the rhodium-corrin AcRhbl joins the small group of B₁₂-mimics classified as ‘antivitamins B₁₂’, isostructural metal analogues of the natural cobalt-corrins that hold significant potential in biological and biomedical applications as selective inhibitors of key cellular processes.