Pt-CeO_x/CN_xNT催化剂的高稳定性和高效氧还原性能（英文）

通过简便的方法合成出了Pt-CeO_x/CN_xNT催化剂。该催化剂以聚吡咯纳米管碳化后的含氮碳纳米管作为载体,以氧化铈作为助催化剂。实验表明,由于二氧化铈的储氧性能,也由于CN_xNT载体中氮元素的促进作用和其本身独特的一维中空结构,Pt-CeO_x/CN_xNT催化剂的氧还原性能明显高于商业Pt/C。而催化剂优秀的稳定性则源于二氧化铈对Pt纳米颗粒和载体的保护作用。     

超稳定结构的MCNTs/CeO2纳米粒子复合材料的制备

采用溶剂热的方法,通过改变反应体系中水的含量,合成制备了不同形态、粒度和复合方式的二氧化铈纳米粒子(ceria nano-particles)/碳纳米管(multi-walls carbon nanotubes-MCNTs)复合材料.反应溶液甲醇中存在少量水的条件下,二氧化铈纳米粒子为球形,具有单晶结构,平均粒度为100 nm左右,与碳纳米管形成超稳定的"串珠"结构的复合材料;反应溶液为甲醇时,二氧化铈纳米粒子粒度约为20 nm的不规则形状,粒子的长轴沿碳管径向分布.X射线衍射分析表明,二氧化铈纳米粒子晶体结构为面心立方.     

氧化铜与CeO2-γ-Al2O3混合氧化物载体之间的表面相互作用

 采用XRD，XPS和TPR等手段研究了氧化铜与二氧化铈－氧化铝机械混合载体之间的表面相互作用．结果表明，在混合载体表面，当氧化铜的负载量低于其在二氧化铈载体上的分散容量时，氧化铜优先与二氧化铈发生作用并分散在其表面；当氧化铜的负载量超过其在二氧化铈载体上的分散容量时，氧化铜会继续在氧化铝表面分散．这些结果说明，在制备用氧化铈改性载体的负载型催化剂时，如果氧化铈的用量偏高，会导致样品中有晶相氧化铈生成，从而对氧化铈作为改性剂的作用不利．     

水分子和二氧化铈(111)表面相互作用的DFT+U研究

采用引入Hubbard参数U修正的密度泛函理论(DFT+U)方法, 对水分子在二氧化铈(111)表面的吸附作用进行了研究. 计算结果表明: 在氧化的二氧化铈(111)表面, 水分子以单氢键构型吸附在二氧化铈表面, 但是不能自发解离; 在还原的二氧化铈(111)表面, 水分子或化学吸附在衬底上, 或自发解离成表面羟基结构. 与氢气在氧化的二氧化铈(111)表面上物理吸附体系的总能相比, 羟基化表面构型是能量更低的构型, 所以羟基解离形成氢气, 从而使表面被氧化的过程需要有外部条件, 反应不能自发进行. 因此, 水分子在还原的二氧化铈(111)表面有两个可能的状态, 即无氢键结构的化学吸附和表面羟基结构的解离吸附. 在一定的外部条件下, 表面羟基结构进一步解离形成氢气, 并使还原的二氧化铈(111)表面得以氧化.     

一种通过纳米粒子的组装制备基于二氧化铈中孔材料的简易方法

用HF或者HCl作联合剂,三嵌段共聚物表面活性剂作模板剂,通过二氧化铈纳米粒子(或者过渡金属掺杂的二氧化铈纳米粒子)组装形成具有热稳定和晶化孔壁的基于二氧化铈的中孔材料。焙烧该合成的超分子模板中孔结构的材料可以形成具有高比表面的基于二氧化铈的中孔材料,这些中孔材料用不同的光谱技术表征。通过D₂-OH交换测得的二氧化铈表面的羟基在组装过程和中孔材料的稳定性方面至关重要。联结剂中的卤素离子(F和Cl离子)可以替代中孔材料的表面羟基,从而影响这些中孔材料的结构稳定性和光学活性,而用具有3 d的过渡金属在组装前掺杂二氧化铈纳米粒子可以显著地提高中孔材料的光学活性,这种提高主要归结为通过掺杂可以促使能量转移的提高。     

2,4-二羟基苯甲酸辅助合成不同形貌二氧化铈及其在NH_3-SCR中的应用（英文）

使用2,4-二羟基苯甲酸(DHBA)辅助控制合成出具有不同形貌(棒状与片状)的碱式碳酸铈。在水热阶段,碱式碳酸铈的形貌可以通过DHBA的量进行调控。当DHBA为3.5 mmol时,得到棒状碱式碳酸铈,然而增加DHBA的量至5.0 mmol时,可形成片状碱式碳酸铈。棒状与片状fcc-Ce O_2(面心立方二氧化铈)可成功地通过相应的焙烧处理获得。所得二氧化铈均有较大的比表面积(60 m~2·g~(-1)),然而与片状二氧化铈相比,棒状二氧化铈有更高的氧化还原能力与更多的酸量。棒状二氧化铈用于NH_3-SCR时有着更好的催化活性。     

Pt-CeOx/CNxNT催化剂的高稳定性和高效氧还原性能

通过简便的方法合成出了Pt-CeO_x/CN_xNT催化剂。该催化剂以聚吡咯纳米管碳化后的含氮碳纳米管作为载体,以氧化铈作为助催化剂。实验表明,由于二氧化铈的储氧性能,也由于CN_xNT载体中氮元素的促进作用和其本身独特的一维中空结构,Pt-CeO_x/CN_xNT催化剂的氧还原性能明显高于商业Pt/C。而催化剂优秀的稳定性则源于二氧化铈对Pt纳米颗粒和载体的保护作用。     

碳纳米管负载金属Pt催化剂的制备和机理研究

本文报道了高温裂解法沉积铂纳米颗粒于碳纳米管壁的新方法。利用红外光谱技术考察了碳纳米管壁的官能团衍生化以及这些官能团与铂颗粒沉积间的关系。利用透射电镜(TEM)、X-射线粉末衍射(XRD)以及光电子能谱技术(XPS)对碳纳米管壁上负载的铂纳米颗粒进行了表征。结果表明，大小约为5 nm的铂纳米颗粒以金属Pt(0)的形式均匀分散在纳米管表面，主要晶面定向为(111)面。同时，考察了甲醇在碳纳米管负载铂纳米颗粒复合材料电极上的电催化氧化。     

MgO负载Fe基催化剂选择性合成单/双/多壁碳纳米管

通过浸渍及水热处理获得MgO负载的Fe基催化剂,并将其用于化学气相沉积过程裂解甲烷获得碳纳米管.结果表明,单/双/多壁碳纳米管可选择性地生长在Fe负载量不同的Fe/MgO催化剂上.当Fe负载量仅为0.5%时,铁原子在载体表面烧结为0.8～1.2nm的铁颗粒,碳在这种小颗粒上以表面扩散为主,导致单壁碳纳米管形成,并且单壁碳纳米管的选择性高达90%.当Fe负载量提高到3%时,铁原子聚集成约2.0nm的颗粒,在化学气相沉积中生长碳纳米管时,碳在Fe催化剂颗粒中的体相扩散的贡献增大,在表相扩散和体相扩散的共同作用下,双壁碳纳米管的选择性显著增高.当进一步增加Fe负载量时,铁原子烧结形成1～8nm的颗粒,经过化学气相沉积,在催化剂上生长了单、双、多壁碳纳米管.随着Fe在MgO载体上负载量的增加,管径、管壁数以及半导体管的含量都增加.本研究提供了一种适合大批量选择性生长单/双/多壁碳纳米管的方法.     

二氧化铈制成的耐火器皿

二氧化铈(CeO_2)是熔点为2725°、具有相当高化学稳定性的氧化物,它对熔融金属及酸(盐酸、硝酸)均稳定。但是用二氧化铈制造耐火器皿的工艺以及它們的应用范围实际上差不多没有研究过。本文叙述用二氧化铈制造器皿及研究其某些性貭的试驗結果。制造器皿时利用純二氧化铈,預先在空气中灼烧过。由二氧化铈粉末制成了試驗用的样品、坩堝、管及热电偶的套管。制造坩堝及試样时将CeO_2粉末加5—6％水潤湿,之后将其通过篩孔約为0.5毫米~2的     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.