光电探测组件电源抑制比测试方法

抑制电磁干扰是解决光纤陀螺尤其是轻小型光纤陀螺低速灵敏度的关键问题,为了从电源完整性角度研究光纤陀螺检测电路干扰传导特性,需要对光电探测组件的电源抑制比进行测试。针对光纤陀螺微弱信号检测的特点,提出一种基于锁相放大器的光电探测组件电源抑制比测试方案,通过测量普通运算放大器的电源抑制比并与手册给定的典型值进行对比,校验了测试系统的准确性。以中低精度光纤陀螺调制-解调频率范围为例,利用该测试系统测量了光电探测组件100 k Hz~3 MHz内电源抑制比频率特性曲线。实验结果表明,光电探测组件的电源抑制比呈明显的高通特性,在100 k Hz频率点处+PSRR约为29.5 d B,到达3 MHz处衰减为17.8 d B,为后续计算电源传导干扰抑制要求和优化电源退耦网络提供了依据。     

Resonance behavior of the system with a limited power supply having the Mises girder as absorber

Nonlinear Dynamics - Three-DOF system with a limited power supply (or non-ideal system) having the Mises girder as absorber is considered. Stationary resonance regimes of vibrations near stable...     

AISI304钢表面低电压等离子体基离子注入层摩擦磨损性能研究

采用高频低电压等离子体浸没离子注入（ＨＬＰＩＩＩ）技术对ＡＩＳＩ３０４不锈钢表面进行了氮离子注入处理;用球－盘摩擦磨损试验机考察了注入处理后钢表面改性层的摩擦磨损性能;用扫描电子显微镜（ＳＥＭ）、俄歇电子能谱仪（ＡＥＳ）和Ｘ射线衍射（ＸＲＤ）考察了改性层的相组成、Ｎ元素的深度分布及磨损机理。研究结果表明：ＨＬＰＩＩＩ处理能够显著提高样品的摩擦学性能,且其摩擦学性能对温度有较大的依赖性,４００℃下处     

An improved smoke-wire flow visualization technique using capacitor as power source

An improved smoke-wire flow visualization technique using a large capacitor as the power source was proposed. Electric current discharged from capacitors was used to heat a fine metal wire suspended in the flow field. The oil droplets attached to the wire were vaporized and smoke filaments followed the flow motions. A digital camera was used to record the images of the smoke filaments. The actions of discharging and camera shutter were triggered by signals from a microcontroller to ensure the accurate timing. Clear images of the streaklines were captured at a freestream velocity up to 12.9 m/s, much higher than the limits of the existing techniques.     

Shock wave induced by a high-intensity power source in hypersonic flow

An upstream structure of a parabolic shock wave induced in a hypersonic flow by a steady-state high-intensity heat source is examined. A similarity analysis is used to derive a simple analytic expression that allows one to predict the shock wave upstream stand-off distance. The solution of Navier–Stokes is obtained to provide basis for the validation of the analytic expression; a reasonable agreement is obtained between the analytic and numerical results for a number of power source intensities.     

Dynamical changes from harmonic vibrations of a limited power supply driving a Duffing oscillator

The harmonic oscillations of a Duffing oscillator driven by a limited power supply are investigated as a function of the alternative strength of the rotor. The semi-trivial and non-trivial solutions are derived. We examine the stability of these solutions and then explore the complex behaviors associated with the bifurcations sequences. Interestingly, a 3D diagram provides a global view of the effects of alternate strength on the appearance of chaos and hyperchaos on the system.     

Aerodynamic characteristics of airfoils with energy supply

The possibility of controlling the aerodynamic characteristics of airfoils with the help of one-sided pulsed-periodic energy supply is studied. The change in the flow structure near the airfoil and its aerodynamic characteristics are determined as functions of the magnitude of energy supply and of the energy-supply location by means of the numerical solution of two-dimensional unsteady equations of gas dynamics. It is demonstrated that external energy supply can substantially improve the aerodynamic characteristics of airfoils with a high lift-to-drag ratio. The moment characteristics of the airfoil are found.     

Planar gas flows with weak energy supply

Perfect gas flows in an unlimited space, which occur during rectilinear motion of a system of distributed heat sources, are investigated. The next modes in order of growth of the number M are examined: the heat conductive, convective, subsonic, transonic, supersonic, hypersonic. Examples of computations are presented. Flows with distributed heat sources attract ever-increasing attention. Such flows are important, e.g., in the problem of radiation propagation [1–5], in the analysis of a gasdynamic laser resonator and the optical characteristics of a ray [6]. Changes in the density because of absorption of the ray energy, which can result in an essential redistribution of the radiation intensity, are of great interest in these problems. Theoretical investigations of a general nature with distributed heat supply [7–10] are also important for the development of further applications. Gas flows for a given distribution of relatively weak heat sources switched on at a certain time are examined in this paper.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 95–102, September–October, 1978.     

Oscillator with variable mass excited with non-ideal source

Nonlinear Dynamics - In this paper dynamics of a non-ideal mechanical system which contains a motor, which is a non-ideal source, and an oscillator with slow time variable mass is investigated. Due...     

Ion distribution function at the boundary with an electrode

The ion distribution function is found in the case in which the Langmuir layer freely passes the ions incident from the plasma while the reverse ion flux is zero. These conditions are realized near the cathode in an arc discharge and at the surface of a probe operating on the ion branch of the characteristic. The electric field outside the Langmuir layer is assumed small. We obtain the connection between ion current and plasma density at the boundary with the electrode, the expressions for the ion mean kinetic energy and for the mean energy removed from the plasma by the ion, which differ markedly from the corresponding expressions in the Maxwellian distribution case.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, Vol. 10, No. 3, pp. 47–54, May–June, 1969.     

Externally pressurized air journal bearing with multiple supply holes

A theoretical analysis is made to predict the load carrying capacity, flow requirement, and stiffness of an externally pressurized air lubricated journal bearing with several supply holes. The load, flow, and stiffness, expressed in dimensionless parameters, are presented for various bearing design parameters and eccentricity ratios. The design procedure of one such bearing either for maximum load capacity or for maximum stiffness is indicated.     

Cavitation flow over a plate with a source

Symmetric flow by an ideal incompressible imponderable fluid over a plate with a source is studied. The existence, within the framework of the adopted scheme, of a limiting value of the power of the source is established. The nature of the flow is investigated at a power of the source close to the limiting value. A numerical analysis of the solution was made on a computer, and the results are shown in the form of the graphical dependences of the cavity size on the power of the source for different cavitation numbers.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Shidkosti i Gaza, No. 5, pp. 157–161, September–October, 1979.The author is grateful to V. P. Karlikov for constant interest in the work, to G. Yu. Stepanov for valuable suggestions relating to the qualitative analysis of the solution, and to Yu. L. Yakimov for discussing the results of the work.     

Turbulent penetrative convection with an internal heat source

An infinite fluid with a vertical cubic temperature profile in the absence of fluid motion is considered as a model for penetrative convection in which a central unstably stratified fluid layer is bounded above and below by stably stratified layers. Turbulence statistics from direct and large eddy numerical simulations for the mean temperature gradient, the velocity and temperature variances and the heat flux are presented for Rayleigh numbers R up to four orders of magnitude above critical. By means of a simplified second-moment closure, analytical scaling laws for the statistics are determined. For high Rayleigh numbers, the mean temperature gradient approaches zero in a central well-mixed layer, a reduced positive (stable) value in upper and lower partially mixed layers, and an unmixed value far above and below. The temperature variance is a factor of R^1/3 larger in the partially mixed layers compared to the well-mixed layer; the velocity variance and heat flux scales the same in both layers. Approximation of the three layers by a two layer model yields an estimate for the height of the mixed layer: the height decreases slowly with increasing Rayleigh number and at the highest Rayleigh number simulated is approximately 30% longer than the unstable layer in the absence of fluid motion.     

Ion acceleration in the radiation pressure regime with ultrashort pulse lasers

Numerical simulations of the interaction between 100 TW ultrashort (<50 fs) laser pulses and nanometre scale carbon targets have been performed using the 2D3V PIC code OSIRIS. Different focusing geometries (f/2 and f/0.8) were investigated, along with varying target thickness and laser polarisation, to see the effect on the accelerated carbon ions and protons. The ions are found to be accelerated either directly by the radiation pressure of the incident radiation on the plasma, by bulk heating in the relativistic transparency regime, or a combination of both. Optimum target thicknesses for maximum carbon energies were found to be ～ 10 nm for the f/2 configuration and ～ 30 nm for the f/0.8 configuration. Despite this greater optimum target thickness, the faster focusing f/0.8 can result in a greater than doubling in maximum ion and proton energy. Circular polarisation was found to give only a marginal advantage in maintaining radiation pressure acceleration due to the deformation of the target during acceleration.     

Air entrainment in a vertical dropshaft with limited air supply

Dropshafts are vertical structures widely used in urban drainage systems and buildings for water transportation.In this paper,a physical model study was conducted to investigate the air entrainment in the dropshaft under various flow regimes with and without air ventilation.Observed from the experiments,the air entrainment mechanisms varied with the water flow regimes in the dropshaft.When there was no water plug formed in the dropshaft,air could be supplied directly from downstream.Once the water plug was formed,while without venting,the air was replenished only from downstream intermittently and then in the form of large air bubble traveling upwards to the airspace at the top;while with venting,air was mainly replenished from the dropshaft top and no large air bubble was observed.The experimental results also showed that the amount of entrained air in the dropshaft with venting was greater than that without venting.     

Least-squares finite-element method for shallow-water equations with source terms

Numerical solution of shallow-water equations （SWE） has been a challenging task because of its nonlinear hyperbolic nature, admitting discontinuous solution, and the need to satisfy the C-property. The presence of source terms in momentum equations, such as the bottom slope and friction of bed, compounds the difficulties further. In this paper, a least-squares finite-element method for the space discretization and θ-method for the time integration is developed for the 2D non-conservative SWE including the source terms. Advantages of the method include： the source terms can be approximated easily with interpolation functions, no upwind scheme is needed, as well as the resulting system equations is symmetric and positive-definite, therefore, can be solved efficiently with the conjugate gradient method. The method is applied to steady and unsteady flows, subcritical and transcritical flow over a bump, 1D and 2D circular dam-break, wave past a circular cylinder, as well as wave past a hump. Computed results show good C-property, conservation property and compare well with exact solutions and other numerical results for flows with weak and mild gradient changes, but lead to inaccurate predictions for flows with strong gradient changes and discontinuities.