Determination of hydrogen sulfide in gasoline by Au nanoclusters modified glassy carbon electrode

A promising hydrogen sulfide (H₂S) sensor was prepared by electrodeposition of Au nanoclusters on glassy carbon electrode (GCE) and the surface structure was characterized by SEM and EDAX. These flower-like form Au nanoclusters, which were made up of highly dense clustering Au nanorods with an average diameter of 20 nm and length up to 80 nm, had an average size about 600 nm and uniformly distributed on the GCE surface. The electrocatalytic oxidation of H₂S in gasoline was performed on this modified electrode, which had a satisfactory liner response to H₂S in the range of 1–80 ppm and a detection limit of 0.45 ppm (s/n = 3). This sensor was sensitive, selective and stable.     

Efficient colorimetric fluoride anion chemosensors based-on simple naphthodipyrrolidone dyes

Two novel lactam-containing compounds based on simple naphthodipyrrolidones have been developed as colorimetric sensors for fluoride anion with high selectivity and sensitivity. The two compounds can selectively act with fluoride anion and exhibit the naked-eye visible color change from purple to blue, and the detection limit could reach the concentration as low as 3.0 × 10^?6 M. The proton nuclear magnetic resonance titrations reveal the happen of intermolecular proton transfer between the hydrogen atom on the lactam N and the fluoride anion. Quantum chemical calculations indicate that the deprotonation can alleviate the distorted degree between the peripheral phenyl and the naphthodipyrrolidone core, and raise the frontier molecular orbital energy levels and decrease the band gap, rendering the protonated molecules a new more batho-chromic absorption band.     

Synthesis,spectroscopic, structural and thermal characterizations of [(C7H6NO4)2TeBr6·4H2O]

Tellurium (IV) complexes with pyridine-2,6-dicarboxylate ligand were synthesized by slow evaporation from aqueous solutions yielding a new compound: [(C₇H₆NO₄)₂TeBr₆·4H₂O]. The structure of this compound was solved and refined by single-crystal X-ray diffraction. The compound is centrosymmetric P2₁/c (N°: 14) with the parameters a = 8.875(5) Å, b = 15.174(5) Å, c = 10.199(5) Å, β = 94.271° (5) and Z = 2. The structure consists of isolated H₂O, isolated [TeBr₆]^2? octahedral anions and (pyridine-2,6-dicarboxylate) [C₇H₆NO₄]⁺ cations. The stability of the structure was ensured by ionic and hydrogen bonding contacts (N–H?Br and O–H?Br) and Van-Der Walls interaction. The thermal decomposition of the compound was studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The FTIR and Raman spectroscopy at different temperatures confirm the existence of vibrational modes that correspond to the organic, inorganic and water molecular groups. Additionally, the UV–Vis diffuse reflectance spectrum was recorded in order to investigate the band gap nature. The measurements show that this compound exhibits a semiconducting behavior with an optical band gap of 2.66 eV.     

Organocatalytic chemoselective monoacylation of 1,n-linear disulfonamides

Predominant monoacylation of 1,n-linear disulfonamides took place in the presence of pyrrolidinopyridine-type organocatalysts when the chain length of the linear disulfonamides was n = 3, 4, or 5 (monoacylate/diacylate = up to 44). The chemoselectivity of the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and N,N′-ditosyl-1,3-propanediamine (n = 3) was found to be 36, favoring the former substrate. Different chain length by only one carbon atom was discriminated in the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and of N,N′-ditosyl-1,4-butanediamine (n = 4) with the relative acylation rate of 16 in the presence of the organocatalyst.     

Susceptibility of FeS2 hydrogen evolution performance to sulfide poisoning

The imminent depletion of fossil fuels raises concern over the need for next-generation clean energy. Of numerous alternatives, electrochemical water splitting is a promising method to store energy in the form of hydrogen. In order to benefit from this system, technological advancement in the development of affordable and efficient electrocatalysts for hydrogen evolution reaction is necessary. Transition-metal electrocatalysts composing of earth-abundant elements, specifically natural FeS₂, has demonstrated excellent performance for hydrogen evolution reaction. However, previous studies on platinum surfaces highlighted the detrimental effect toward hydrogen evolution performance upon poisoning of the active sites. In this work, we examine the susceptibility of natural FeS₂ toward sulfide poisoning. Our findings showed that the degradation effect from the introduction of sulfide to natural FeS₂ was not as severe as that observed on platinum. The overpotential (at a current density of 10 mA/cm²) for natural FeS₂ and platinum increased by approximately 20 and 110 mV, respectively.     

Phase equilibria of hydrogen sulfide and carbon dioxide simple hydrates in the presence of methanol, (methanol + NaCl) and (ethylene glycol + NaCl) aqueous solutions

This work aims at reporting the dissociation pressures of hydrogen sulfide and carbon dioxide simple hydrates in the presence of methanol, (methanol + NaCl) and (ethylene glycol + NaCl) aqueous solutions at different temperatures and various concentrations of inhibitor in aqueous solution. The equilibrium results were generated using an isochoric pressure-search method. These values are compared with some selected experimental data from the literature on the dissociation conditions of hydrogen sulfide and carbon dioxide simple hydrates in the presence of pure water to show the inhibition effects of the above mentioned aqueous solutions. Comparisons are finally made between our experimental values and the corresponding literature data. Some disagreements among the literature data and our data are found.     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

In-line Raman spectroscopy and advanced process control for the extraction of anethole and fenchone from fennel (Foeniculum vulgare L. MILL.)

Plants are a desirable source for molecules of all kinds and for every purpose. Besides traditional techniques for extraction, plants are challenging for modern process engineering due to great variations because of their natural origin. One way to ensure high quality and low costs, as well as highly resource-efficient extraction, is in-line monitoring and process control. This study demonstrates the use of in-line Raman spectroscopy for monitoring the extraction of anethole and fenchone from fennel seed as a typical example. A partial least square calibration model with high accuracy was created. (Anethole: R² = 0.99, root mean square error of calibration (RMSEC) = 0.01256 g/L, root mean square error of validation (RMSEV) = 0.02608 g/L, and calibration range up to 2 g/L. Fenchone: R² = 0.98, RMSEC = 0.01188 g/L, RMSEV = 0.01945 g/L, and calibration up to 0.75 g/L.) These data are directly linked to a physicochemical process model to control the extraction process in real time and to perform predictive simulations while processing. The added value of this approach for modern phytoextraction is highlighted and exemplified as a major step toward sustainable Green Extraction processes.     

Electrochemical characterization on cobalt sulfide for electrochemical supercapacitors

High capacitance at a high charge–discharge current density of 50 mA/cm² for a new type of electrochemical supercapacitor cobalt sulfide (CoS_x) have been studied for the first time. The CoS_x was prepared by a very simply chemical precipitation method. The electrochemical capacitance performance of this compound was investigated by cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge–discharge tests with a three-electrode system. The results show that CoS_x has excellent electrochemical capacitive characteristic with potential range −0.3 ∼ 0.35 V (versus SCE) in 6 M KOH solution. Charge–discharge behaviors have been observed with the highest specific capacitance values of 475 F/g at the current density of 5 mA/cm², even at the high current density of 50 mA/cm², CoS_x also shows the high specific capacitance values of 369 F/g.     

Synthesis of a reduction-sensitive Bletilla striata polysaccharide amphiphilic copolymer

A reduction-sensitive stearic acid modified-Bletilla striata polysaccharide amphiphilic copolymer is synthesized. The copolymer enabled to spontaneously form micelles which display faster docetaxel release rates under reduction condition and enhanced anticancer activity in vitro after incorporating docetaxel into micelles.     

Synthesis and crystal structure of (S)-pindolol

Racemic 3-(4-indolyloxy)-1,2-propanediol 2 has been effectively resolved into (S)- and (R)-enantiomers by a preferential crystallization procedure. Non-racemic (S)-2 was converted into (S)-4-(2,3-epoxypropoxy)-1H-indole (S)-4 via a Mitsunobu reaction and then into (S)-pindolol (S)-1. The crystalline (S)-1 was studied by single crystal X-ray diffraction. A large number of symmetry independent molecules (Z′ = 6) led to a weakening of the system of strong intermolecular hydrogen bonds, which combined with a loose packing (PI = 64.6%), may be the cause of the abnormally low melting point of (S)-1 as compared with rac-1.     

Hydrogen production from hydrogen sulfide using membrane reactor integrated with porous membrane having thermal and corrosion resistance

Using mathematical model and experimental method, the thermal decomposition of hydrogen sulfide in membrane reactor with porous membrane which has Knudsen diffusion characteristics was investigated. With mathematical model, the effect of characteristics of membrane reactor and operating conditions on H₂ concentration in the permeate chamber, y_H2, which increases at higher reaction temperature, lower pressure and higher ratio of cross-sectional area of the permeate chamber to that of the reactor, was evaluated. The reaction experiments with ZrO₂–SiO₂ porous membrane were carried out under the following conditions: temperature T, 923–1023 K; pressure in the reactor p^R_T, 0.11–0.25 MPa absolute; pressure in the permeate chamber p^P_T, 5 kPa absolute and inlet flow rate of H₂S f⁰_H2S, 3.2×10⁻⁵–1.5×10⁻⁴ mol/s. At p^R_T=0.11 MPa and f⁰_H2S=6.4×10⁻⁵, y_H2 increased from 0.02 at T=923 K to 0.15 at 1023 K. With the experimental condition, p^R_T=0.11, T=1023 K and f⁰_H2S=3.2×10⁻⁵, y_H2 was 0.22. The experimental results were compared with the results of the mathematical analysis. The agreement between both the results is found rather good at a lower reacting temperature, but not so good at a higher reacting temperature.     

An efficient material via meta-position connection as thermally activated delayed fluorescence emitter for organic light-emitting diodes

A novel compound was designed and synthesized by connecting a dicyanobenzene acceptor and two 9,9-dimethyl-9,10-dihydroacridine donors to the 1,3,5-position of a phenyl ring by meta-position connection. This compound, which is a novel emitter for OLED devices, exhibits preferable heat stability. Moreover, the energy gap between its singlet and triplet states is as small as 0.04 eV, resulting in this molecule possesses thermally activated delayed fluorescence. Therefore, the corresponding device showed efficient electroluminescent performances. The maximum external quantum efficiency, maximum current efficiency, maximum power efficiency and maximum luminance were 16.5%, 40.8 cd A^?1, 45.8 lm W^?1 and 5120 cd m^?2, respectively. In addition, the CIE_x,y only changed from (0.22, 0.38) to (0.22, 0.39) over the entire operating voltage range, which confirms that the device possesses highly stable chromaticity with respect to the current density. Based on these experimental results, meta-connected type structures may provide a new approach for developing high-performance TADF emitters for OLED applications.     

Polyimide-derived carbon nanofiber membranes as anodes for high-performance flexible lithium ion batteries

Heteroatoms-doped carbon nanofiber membranes with flexible features were prepared by electrospinning with heterocyclic polyimide (PI) structures containing biphenyl and pyrimidine rings. The products with optimized treatment could achieve 695 mAh/g at 0.1 A/g and retain 245 mAh/g at 1.5 A/g after 300 cycles when used as anode for Li-ion batteries.     

Synthesis and antiviral bioactivity of novel chalcone derivatives containing purine moiety

A series of novel chalcone derivatives containing purine group was synthesized and evaluated for their antiviral activities against cucumber mosaic virus and tobacco mosaic virus. Compound 3o exhibited remarkable antiviral activities and strong combining capacity to tobacco mosaic virus coat protein.     

A photocleavable low molecular weight hydrogel for light-triggered drug delivery

A photocleavable low-molecular-weight hydrogelator (LMWG) was synthesized based on coumarin derivative.~1H NMR and UV spectroscopy study suggested that the gelator had good gelling ability, and the driving force for the gelation were hydrogen bonding and π-π stacking. This molecular hydrogel exhibited satisfied photocleavage at C-N bond in 7-amino coumarin with the light irradiation (365 nm,77.5 mW/cm~2). The promising photo-triggered drug release of antineoplastics cytarabine hydrochloride has been obtained, due to the photocleavage motived gel-sol transition.     

Poly(m-ferrocenylaniline) modified carbon nanotubes-paste electrode encapsulated in nafion film for selective and sensitive determination of dopamine and uric acid in the presence of ascorbic acid

A nafion covered carbon nanotubes-paste electrode modified with poly(m-ferrocenylaniline), (Nf/p(FcAni)-CNTsPE), provides a novel voltammetric sensor for the selective determination of dopamine (DA) and uric acid (UA) in the presence of ascorbic acid (AA). We studied the electrochemical activity of Nf/p(FcAni)-CNTsPE toward DA, UA, and AA by differential pulse voltammetry (DPV). DA and UA anodic peaks appear at 0.30 and 0.45 V, respectively while an anodic peak for AA was not observed. DPV oxidation peak values are linearly dependent on DA concentration over the range 1–150 μM (r² = 0.992), and on UA concentration over the range 5–250 μM (r² = 0.997). DA and UA detection limits are estimated to be 0.21 and 0.58 μM, respectively. The modified electrode shows both good selectivity and reproducibility for the selective determination of DA and UA in real samples. Finally, the modified electrode was successfully applied for the determination of DA and UA in pharmaceutical or biological sample fluids.     

Visible-light assisted one-pot preparation of aryl glyoxals from acetoarylones via in-situ arylacyl bromides formation: Selenium-free approach to acetoarylones oxidation

A novel visible-light (blue LEDs: hν = 425 ± 15 nm) photocatalyzed one-pot method for the synthesis of electronically diverse aryl glyoxals in good to excellent yields from acetoarylones and green regents such as air, vitamin C and dioxane dibromide has been described. In addition, an application of the current methodology has been demonstrated for the oxidation of monoamine oxidase-B inhibitors, i.e., 1-(4-((4-fluorobenzyl)oxy)phenyl)ethanone and 1-(3-((4-chlorobenzyl)oxy)phenyl)ethanone. This finding may serves as a valuable alternative to the traditional acetoarylones oxidation reactions conducted using selenium dioxide a harmful and unselective reagent known to simultaneously oxidize allylic, benzylic, CH₃ and so on.     

Novel dual inhibitors against FP-2 and PfDHFR as potential antimalarial agents: Design,synthesis and biological evaluation

A series of novel 2,4-diaminopyrimidine-modified compounds was designed and synthesized. Compound 14 showed micromolar dual inhibitory effect on both FP-2 and PfDHFR, and potential inhibition to the proliferation of P. falciparum 3D7 strain and chloroquine-resistant P. falciparum Dd2 strain.     

Conformational and stereoelectronic investigation of chloromethyl methyl sulfide and its sulfinyl and sulfonyl analogs

Three compounds based on polyoxometalate building blocks, [Cu(en)₂]{[Cu(en)₂]₂[Mo^VI₅Mo^V₃V^IV₈O₄₀(PO₄)]} · 4H₂O (1), [Co(en)₂]{[Co(en)₂]₂[HMo^VI₄Mo^V₄V^IV₈O₄₀(PO₄)]} · 5H₂O (2) and [Ni(en)₂]{[Ni(en)₂]₂[Mo^VI₅Mo^V₃V^IV₈O₄₀(VO₄)]} · 2H₂O (3) (en = ethylenediamine), have been synthesized and characterized by elemental analysis, IR, XPS, XRD, TGA and single-crystal X-ray diffraction analysis. The result of structure determination shows that isomorphic compounds 1, 2 and 3 feature a one-dimensional chain built from the reduced tetra-capped pseudo-Keggin polyoxoanion, which is further interconnected by [M(en)₂]²⁺ (M = Cu, Co and Ni) groups via the terminal oxygen atoms of polyoxoanions. The crystal data for these compounds are the following: 1, monoclinic, space group C2/c, a = 26.702(3) Å, b = 13.4539(14) Å, c = 19.5987(19) Å, β = 108.650(2)°, V = 6671.0(12) Å³, Z = 4; 2, monoclinic, space group C2/c, a = 26.244(3) Å, b = 13.5070(17) Å, c = 19.581(3) Å, β = 106.881(2)°, V = 6641.8(15) Å³, Z = 4; 3, monoclinic, space group C2/c, a = 26.2789(15) Å, b = 13.5408(6) Å, c = 19.6312(9) Å, β = 106.2590(10)°, V = 6706.1(6) Å³, Z = 4. Variable-temperature magnetic susceptibility measurements of compounds 1 and 3 reveal the feature of antiferromagnetic exchange in these compounds.