Nitrogen‐Rich Compounds of the Lanthanoids: The 5,5′‐Azobis[1H‐tetrazol‐1‐ides] of some Yttric Earths (Tb,Dy, Ho,Er, Tm,Yb, and Lu)

A set of N‐rich salts, 3 – 9 , of the heavy lanthanoids (terbium, 3 ; dysprosium, 4 ; holmium 5 ; erbium, 6 ; thulium, 7 ; ytterbium, 8 ; lutetium, 9 ) based on the energetic 5,5′‐azobis[1H‐tetrazole] (H₂ZT) was synthesized and characterized by elemental analysis, vibrational (IR and Raman) spectroscopy, and X‐ray structure determination. The synthesis of the lanthanoid salts 3 – 9 was performed by crystallization from concentrated aqueous solutions of disodium 5,5′‐azobis[1H‐tetrazol‐1‐ide] dihydrate (Na₂ZT?2 H₂O; 1 ) and the respective Ln(NO₃)₃?5 H₂O and yielded large rhombic crystals of the type [Ln(H₂O)₈]₂(ZT)₃?6 H₂O in ca. 70% of the theoretical yield. The compounds 3 – 9 are isostructural (triclinic space group P ) to the previously published yttrium salt 2 ; they show, however, a clear lanthanoid contraction of several crystallographic parameters, e.g., the cell volume or the Ln? O bond lengths of the Ln³⁺ ions and the coordinating H₂O molecules. The lanthanoid contraction influences the strengths of the H‐bonds, which can be observed as a red shift by 4 cm^?1 in the characteristic IR band, in particular from 3595 cm^?1 ( 3 ) to 3599 cm^?1 ( 9 ). In good agreement with previous works, 2 – 9 are purely salt‐like compounds without a coordinative bond between the tetrazolide anion and the Ln³⁺ cation.     

5,5′‐Hydrazinebistetrazole: An Oxidation‐stable Nitrogen‐rich Compound and Starting Material for the Synthesis of 5,5′‐Azobistetrazolates

All 5,5′‐hydrazinebistetrazoles reported in the literature are sensitive to oxidation and react with atmospheric oxygen to yield the corresponding 5,5′‐azobistetrazolates on time. Herewith, we report on the synthesis of the free acid 5,5′‐hydrazinebistetrazole (HBT) which showed to be stable on air for extended periods of time. The compound was fully characterized by analytical and spectroscopic methods and its X‐ray structure was determined by diffraction techniques. Besides, we determined its explosive properties by BAM methods and calculated its heat of formation (+414 kJ mol^?1), detonation velocity (8523 m s^?1) and detonation pressure (27.7 GPa). HBT proved to be very safe to handle (impact sensitivity: >30 J, friction sensitivity: ～108 N) and was used as a starting material for the synthesis of some already reported 5,5′‐azobistetrazolates: NH₄⁺, NH₂NH₃⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺.     

(4,4′‐Bipyridine)mercury(II) Coordination Polymers,Syntheses, and Structures

Mercury(II) complexes with 4,4′‐bipyridine (4,4′‐bipy) ligand were synthesized and characterized by elemental analysis, and IR, ¹H‐ and ¹³C‐NMR spectroscopy. The structures of the complexes [Hg₃(4,4′‐bipy)₂(CH₃COO)₂(SCN)₄]_n ( 1 ), [Hg₅(4,4′‐bipy)₅(SCN)₁₀]_n ( 2 ), [Hg₂(4,4′‐bipy)₂(CH₃COO)₂]_n(ClO₄)_2n ( 3 ), and [Hg(4,4′‐bipy)I₂]_n ( 4 ) were determined by X‐ray crystallography. The single‐crystal X‐ray data show that 2 and 4 are one‐dimensional zigzag polymers with four‐coordinate Hg‐atoms, whereas 1 is a one‐dimensional helical chain with two four‐coordinate and one six‐coordinate Hg‐atom. Complex 3 is a two‐dimensional polymer with a five‐coordinate Hg‐atom. These results show the capacity of the Hg‐ion to act as a soft acid that is capable to form compounds with coordination numbers four, five, and six and consequently to produce different forms of coordination polymers, containing one‐ and two‐dimensional networks.     

Synthesis and Crystal Structures of O‐2′,3′‐Cyclic Cyclopentanone and Cyclohexanone Ketals of the Cytostatic 5‐Fluorouridine

The synthesis of two O‐2′,3′‐cyclic ketals, i.e., 5 and 6 , of the cytostatic 5‐fluorouridine ( 2 ), carrying a cyclopentane and/or a cyclohexane ring, respectively, is described. The novel compounds were characterized by ¹H‐, ¹⁹F‐, and ¹³C‐NMR, and UV spectroscopy, as well as by elemental analyses. Their crystal structures were determined by X‐ray analysis. Both compounds 5 and 6 show an anti‐conformation at the N‐glycosidic bond which is biased from +ac to +ap compared to the parent nucleoside 2 . The sugar puckering is changed from ^2′E to _3′E going along with a reduction of the puckering amplitude τ_m by ca. 10–13° due to the ketalization. The conformation about the sugar exocyclic bond C(4′)? C(5′) of 5 and 6 remains unchanged, i.e., g⁺, compared with compound 2 .     

The Synthesis,Photophysical Characterization,and X‐Ray Structure Analysis of Two Polymorphs of 4,4′‐Diacetylstilbene

A palladium(II) acetate‐catalyzed synthesis of 1 that utilizes the novel triazene 1‐{4‐[(E)‐morpholin‐4‐yldiazenyl]phenyl}ethanone as a synthon is described. The room temperature absorption spectra of 1 in various solvents exhibited a π→π* transition in the range of 330–350 nm. Compound 1 was observed to be luminescent, with room‐temperature solution and solid‐state emission spectra that exhibited maxima in the range 400–500 nm. All room‐temperature absorption and emission spectra exhibited some degree of vibrational structure. The emission spectrum of 1 at 77 K in propanenitrile glass was broad and featureless with a maximum at 447 nm. Compound 1 crystallized as a yellow and colorless polymorph. X‐Ray structure analyses of both of these polymorphs and 1‐{4‐[(E)‐morpholin‐4‐yldiazenyl]phenyl}ethanone are presented.     

A New Germanium Complex Containing Chelating Pyridinecarboxylate Ligands: cis‐Dihydroxybis(pyridine‐2‐carboxylato‐κN1,κO2)germanium Hydrate (1 : 2) (cis‐[Ge(pyca)2(OH)2]⋅2 H2O)

A new germanium complex, cis‐[Ge(pyca)₂(OH)₂]?2 H₂O ( 1 ; pyca=pyridine‐2‐carboxylato), was synthesized by the reaction of [Ge(acac)₂Cl₂] (acac=acetylacetonato=pentane‐2,4‐dionato) with potassium pyridine‐2‐carboxylate (Kpyca) in H₂O/THF. According to the single‐crystal X‐ray diffraction analysis, each Ge‐atom of 1 is coordinated by two pyca ligands and two OH^? groups (Fig. 1). These molecules are bonded to each other via a system of H‐bonds resulting in a sheet‐like structure (Fig. 2). The complex is decomposed during heating with stepwise mass loss and formation of GeO₂ as final product (Fig. 3).     

Building Functionality into 4′‐Hydrazone Derivatives of 2,2′: 6′,2″‐Terpyridine

The syntheses of the five 2,2′: 6′,2″‐terpyridine (tpy) ligands 5 – 9 functionalized in the 4′‐position with a hydrazone substituent RR′C?N? NH (R=R′=Me; R=H, R′=4‐BrC₆H₄, 4‐O₂NC₆H₄, 4‐MeOC₆H₄, or 3,5‐(MeO)₂C₆H₃) are described. Protonation of the tpy domain of the ligands is facile. Solution behaviour has been studied by NMR and electronic spectroscopies. Representative structural data are presented for neutral and monoprotonated ligands, and illustrate that H‐bonding involving the formal amine NH unit is a dominant structural motif in all cases.     

Synthesis and Solid‐State,Solution, and Luminescence Properties of Near‐Infrared‐Emitting Neodymium(3+) Complexes Formed with Ligands Derived from Salophen

A series of free ligands, H₂ L ¹ , H₂ L ² , H₂ L ³ , and H₂ L ⁴ , designed for the coordination and sensitization of near‐infrared(NIR)‐emitting Nd³⁺ were synthesized by modifying the salophen Schiff base with different numbers and locations of Br‐substituents. The nature of the Nd³⁺ complexes in solution was determined to be [ML₂]^? by spectrophotometric titrations as an indication that the different substituents do not affect significantly the nature of the formed species. The structures were determined in the solid phase from X‐ray diffraction experiments. The stoichiometries and structures in the solid state are different from those observed in solution. We established that the structures in the solid state can be partially controlled by the crystallization conditions. The ligands L ¹ – L ⁴ have the ability to sensitize Nd³⁺ through intramolecular energy transfer from the ligand to the metal ion. We quantified that the numbers and locations of Br‐substituents control the emitted luminescence intensity of the complex by the heavy‐atom effect.     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

Palladium(II) Complexes of the Thiosemicarbazone and N‐Ethylthiosemicarbazone of 3‐Hydroxypyridine‐2‐carbaldehyde: Synthesis,Properties, and X‐Ray Crystal Structure

Two novel, stable Pd^II complexes, compounds 3 and 4 , of two 3‐hydroxypyridine‐2‐carbaldehyde thiosemicarbazones, 1 and 2 , resp., were prepared from Li₂PdCl₄. The single‐crystal X‐ray structure of complex 3 (= [Pd( 2 )Cl]) shows that the ligand monoanion coordinates in a planar conformation to the metal via the pyridyl N‐, the imine N‐, and the thiolato S‐atoms. Intermolecular H‐bonds, π–π, and CH ? ? ? π interactions lead to a two‐dimensional supramolecular assembly. The electronic, IR, UV/VIS, and NMR spectroscopic data of the two complexes are reported, together with their electrochemical properties. A sophisticated experimental procedure was used to determine the multiple dissociation constants of the ligands 1 and 2 by UV/VIS titration.     

Stille Cross‐Coupling of a Racemic Planar‐Chiral Ferrocene and Crystallographic Trace Analysis of Catalysis Intermediates and By‐products

A pressure‐controlled procedure for the S_N1 reaction of rac‐1‐[(dimethylamino)methyl]‐2‐(tributylstannyl)ferrocene ( 1 ) to rac‐1‐(phthalimidomethyl)‐2‐(tributylstannyl)ferrocene ( 2 ) was developed. Pd⁰‐Catalyzed Stille coupling of 2 with iodobenzene afforded rac‐1‐phenyl‐2‐(N‐phthalimidomethyl)ferrocene ( 5 ) in 74% yield; after trace enrichment by crystallization of the combined mother liquors, one single crystal of each, 5 , catalysis intermediate trans‐iodo(σ‐phenyl)bis(triphenylarsino)palladium(II) ( 7 ), trans‐diiodobis(triphenylarsino)palladium(II) ( 8 ), and rac‐2,2′‐bis(phthalimidomethyl)‐1,1′‐biferrocene ( 9 ) could be isolated by crystal sorting under a microscope and characterized by X‐ray crystal structure analysis. Furthermore, 5 was deprotected to amine ( 11 ), which does even survive the Birch reduction to rac‐1‐(aminomethyl)‐2‐(cyclohexa‐2,5‐dienyl)ferrocene ( 12 ).     

cis‐trans Peptide‐Bond Isomerization in α‐Methylproline Derivatives

α‐Methyl‐L ‐proline is an α‐substituted analog of proline that has been previously employed to constrain prolyl peptide bonds in a trans conformation. Here, we revisit the cis‐trans prolyl peptide bond equilibrium in derivatives of α‐methyl‐L ‐proline, such as N‐Boc‐protected α‐methyl‐L ‐proline and the hexapeptide H‐Ala‐Tyr‐αMePro‐Tyr‐Asp‐Val‐OH. In Boc‐α‐methyl‐L ‐proline, we found that both cis and trans conformers were populated, whereas, in the short peptide, only the trans conformer was detected. The energy barrier for the cis‐trans isomerization in Boc‐α‐methyl‐L ‐proline was determined by line‐shape analysis of NMR spectra obtained at different temperatures and found to be 1.24 kcal/mol (at 298 K) higher than the corresponding value for Boc‐L ‐proline. These findings further illuminate the conformationally constraining properties of α‐methyl‐L ‐proline.     

Dynamic Phenomena in Self‐Complementary {2}‐Metallocryptates Probed by Solution 133Cs‐NMR. New Insights into Ion Pairing Processes: X‐Ray Structure and Solid‐State NMR Spectra of a Meandering Species

Two self‐complementary {2}‐metallocryptates, differing in methyl and phenyl substituents, respectively, have been studied by X‐ray analysis, and solid‐state and solution NMR. Mixed Mg/Cs metal methyl complex 2 is a linear polymer in the solid state. The two different Cs sites are confirmed by ¹³³Cs‐solid‐state NMR. By contrast, the analog mixed Mg/Cs metal phenyl complex 4 is a meandering polymer as shown by an actual X‐ray analysis. The four non‐equivalent Cs‐sites in 4 are reflected in the solid‐state NMR spectra. Solution ¹³³Cs‐NMR spectra of 4 reveal two independent dynamic processes: a fast exchange of Cs within contact ion‐pairs and solvent‐separated ion‐pairs (CIP, SSIP), and a slower exchange of ‘inside’ endo Cs, surrounded by three ligands, and ‘outside’ exo Cs involved in the CIP/SSIP equilibrium. Complete line‐shape analysis of variable‐temperature ¹³³Cs‐NMR spectra of 4 yield kinetic parameters of =10.8 kcal/mol for the fast SSIP‐CIP exchange and =13.2 kcal/mol for the slower endo/exo exchange of Cs. DOSY‐NMR Measurements confirm the monomeric nature of 4 in solution.     

Regio‐ and Stereocontrolled Synthesis of (2R*,3R*,4R*)‐3,4‐Dichloro‐1,2,3,4,5,8‐hexahydronaphthalen‐2‐yl Acetate via Tandem SN2′ Reactions

The hydroperoxy endoperoxide 3 , obtained by photooxygenation of isotetralin (= 1,4,5,8‐tetrahydronaphthalene; 1 ), was reduced with thiourea, and the resulting intermediate 4 was converted, after acetylation with acetyl chloride, to the interesting, double‐chlorinated acetate 5 in an unprecedented tandem reaction (Scheme 1). The structures and relative configurations of 3 and 5 were determined by NMR spectroscopy and by single‐crystal X‐ray‐diffraction analyses (Figs. 1 and 2, resp.). A mechanistic rationalization for the conversion of 4 to 5 is proposed (Scheme 2).     

Reactions of Acid Chlorides/Ketenes with 2‐Substituted 4,5‐Dihydro‐4,4‐dimethyl‐1,3‐thiazoles: Formation of Penam Derivatives

Addition reactions of acid chlorides with various 2‐substituted 4,5‐dihydro‐4,4‐dimethyl‐5‐(methylsulfanyl)‐1,3‐thiazoles under basic conditions were studied. Two kinds of products were obtained from these additions, β‐lactams and non‐β‐lactam adducts. When the reaction was carried out with 4,5‐dihydro‐1,3‐thiazoles with a Ph substituent at C(2), the reaction proceeded via formal [2+2] cycloaddition and led to the correspoding β‐lactam. On the other hand, acid chlorides and 4,5‐dihydro‐1,3‐thiazoles bearing an α‐H‐atom at the C(2)‐substituent underwent C(α)‐ and/or N‐addition reactions and furnished non‐β‐lactam adducts, i.e., C(α)‐ and/or N‐acylated 1,3‐thiazolidines. The attempted transformations of sulfonyl esters of exo‐6‐hydroxy penams to endo‐6‐azido penams failed, although they were successful with mono‐β‐lactams under the same conditions.     

Synthesis,Characterization, Crystal and Molecular Structure of 1,5‐Dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐imine

The reaction of 1,5‐dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐one ( 3 ) with an alkylamine (butylamine, hexylamine or ethylenediamine) yields, quite unexpectedly and in the absence of catalyst, the novel compound 1,5‐dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐imine ( 4 ) as the sole, analytically pure, solid product, which was fully characterized. The structure of 4 was unequivocally solved by single‐crystal X‐ray‐diffraction analysis. The compound crystallizes in a monoclinic cell (space group P 2₁/c), with two molecules in the asymmetric unit, held together by intermolecular H‐bonds. Compound 4 could be interesting as a bi‐ or even tridentate ligand, and exhibits a strong fluorescence upon excitation at 310 nm. A mechanism, based on the observed C? N bond cleavage, is proposed.     

Improved conditions for fluorescent staining of proteins with 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid in SDS‐PAGE

A simple and sensitive fluorescent staining method for the detection of proteins in SDS‐PAGE, namely IB (improved 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid) stain, is described. Non‐covalent hydrophobic probe 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid was applied as a fluorescent dye, which can bind to hydrophobic sites in proteins non‐specifically. As low as 1 ng of protein band can be detected briefly by 30 min washing followed by 15 min staining without the aiding of stop or destaining step. The sensitivity of the new presented protocol is similar to that of SYPRO Ruby, which has been widely accepted in proteomic research. Comparative analysis of the MS compatibility of IB stain and SYPRO Ruby stain allowed us to address that IB stain is compatible with the downstream of protein identification by PMF.     

Ultra‐fast adenosine 5′‐triphosphate,adenosine 5′‐diphosphate and adenosine 5′‐monophosphate detection by pressure‐assisted capillary electrophoresis UV detection

Herein, we report a new CE method to measure adenine nucleotides adenosine 5′‐triphosphate, adenosine 5′‐diphosphate, and adenosine 5′‐monophosphate in red blood cells. For this purpose, 20 mmol/L sodium acetate buffer at pH 3.80 was used as running electrolyte, and the separation was performed by the simultaneous application of a CE voltage of 25 kV and an overimposed pressure of 0.2 psi from inlet to outlet. A rapid separation of these analytes in less than 1.5 min was obtained with a good reproducibility for intra‐ and inter‐assay (CV<4 and 8%, respectively) and an excellent analytical recovery (from 98.3 to 99%). The applicability of our method was proved by measuring adenine nucleotides in red blood cells.