Electrochemical Sensor Prepared from Molecularly Imprinted Polymer for Recognition of 1,3-Dinitrobenzene (DNB)

An electrochemical sensor was modified with multi‐wall carbon nanotubes (MWCNT) and molecularly imprinted polymer (MIP) material synthesized with acrylamide and ethylene glycol dimethacrylate (EGDMA) in the presence of 1,3‐dinitrobenzene (DNB) as the template molecule. The MWCNT and MIP layers were successively modified on the surface of a glassy carbon electrode (GCE), of which the MIP film works as an artificial receptor due to its specific molecular recognition sites. The MIP material was characterized by FT‐IR and electrochemical methods of square wave voltammetry (SWV). The interferences of other nitroaromatic compounds (NAC) such as 2,4,6‐trinitrotoluene (TNT), 1,3,5‐trinitrobenzene (TNB) and 2,4‐dinitrotoluene (DNT) to DNB were also investigated by the prepared MIP/MWCNT electrode. Compared with other traditional sensors, the MIP/MWCNT modified electrode shows good selectivity and sensitivity. In addition, the current responses to DNB are linear with the concentration ranging from 4.5×10^?8 to 8.5×10^?6 mol/L with the detection limits of 2.5×10^?8 (?0.58 V) and 1.5×10^?8 mol/L (?0.69 V) (S/N=3). The construction process of MIP/MWCNT modified electrode was also studied as well. All results indicate that the MIP/MWCNT modified electrode established an improving way for simple, fast and selective analysis of DNB.     

Determination of Explosives Using Electrochemically Reduced Graphene

A graphene‐based electrochemical sensing platform for sensitive determination of explosive nitroaromatic compounds (NACs) was constructed by means of electrochemical reduction of graphene oxide (GO) on a glassy carbon electrode (GCE). The electrochemically reduced graphene (ER‐GO) adhered strongly onto the GCE surface with a wrinkled morphology that showed a large active surface area. 2,4‐Dinitrotoluene (2,4‐DNT), as a model analyte, was detected by using stripping voltammetry, which gave a low detection limit of 42 nmol L⁻¹ (signal‐to‐noise ratio=3) and a wide linear range from 5.49×10⁻⁷ to 1.1×10⁻⁵ M . Further characterizations by electrochemistry, IR, and Raman spectra confirmed that the greatly improved electrochemical reduction signal of DNT on the ER‐GO‐modified GC electrode could be ascribed to the excellent electrocatalytic activity and high surface‐area‐to‐volume ratio of graphene, and the strong π–π stacking interactions between 2,4‐DNT and the graphene surface. Other explosive nitroaromatic compounds including 1,3‐dinitrobenzene (1,3‐DNB), 2,4,6‐trinitrotoluene (TNT), and 1,3,5‐trinitrobenzene (TNB) could also be detected on the ER‐GO‐modified GC electrode at the nM level. Experimental results showed that electrochemical reduction of GO on the GC electrode was a fast, simple, and controllable method for the construction of a graphene‐modified electrode for sensing NACs and other sensing applications.     

Phenylene(vinylene) based fluorescent polymer for selective and sensitive detection of nitro‐explosive picric acid

We report the synthesis of phenylene(vinylene) based blue light emitting polymer by atom transfer radical polymerization with very good yield. Their photophysical properties were studied systematically with increasing polarities of solvent and sensing of nitro aromatics in solution and in vapor phase. The sensory properties of the polymer were studied toward various nitroaromatic compounds like nitrobenzene (NB), nitrotoluene (NT), dinitrobenzene (DNB), dinitrotoluene (DNT), nitro benzoic acid (NBA), 3‐nitro benzaldehyde (3‐NBA), trinitrotoluene (TNT), 4‐nitrophenol (NP), and picric acid (PA) in solution state. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3800–3807     

Conjugated polymers for the fluorescent detection of nitroaromatics: Influence of side‐chain sterics and π‐system electronics

A series of eight poly(p‐phenylene vinylene) (PPV) and poly(p‐phenylene ethynylene) (PPE) ( P1–P8 ) derivatives were tested for their ability to detect the nitroaromatic explosive 2,4,6‐trinitrotoluene (TNT) and its model compound 2,6‐dinitrotoluene (DNT). The polymers P1–P8 represent five structural classes that have not been examined for nitroaromatic sensing. These new motifs include PPE derivatives with a main‐chain m‐terphenyl unit ( P1 ) or oxacyclophane canopy‐like structure ( P2 ) and PPV derivatives with 2,6‐mesitylenephenylene repeats ( P3 and P4 ), 9,9‐dialkyl‐1,4‐fluorenylene repeats ( P5 and P6 ), or m‐phenylene units that periodically disrupt π‐conjugation along the backbone of the polymer ( P7 and P8 ). The time‐dependent photoluminescent response of films to TNT and DNT and the solution‐phase Stern‐Volmer quenching constants for both TNT and DNT were determined. The results are rationalized in terms of side‐chain sterics and π‐system electronics and are discussed relative to known conjugated polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1487–1492     

Chromo‐Fluorogenic Detection of Nitroaromatic Explosives by Using Silica Mesoporous Supports Gated with Tetrathiafulvalene Derivatives

Three new hybrid gated mesoporous materials ( SN₃‐1 , SNH₂‐2 , and SN₃‐3 ) loaded with the dye [Ru(bipy)₃]²⁺ (bipy=bipyridine) and capped with different tetrathiafulvalene (TTF) derivatives (having different sizes and shapes and incorporating different numbers of sulfur atoms) have been prepared. The materials SN₃‐1 and SN₃‐3 are functionalized on their external surfaces with the TTF derivatives 1 and 3 , respectively, which were attached by employing the “click” chemistry reaction, whereas SNH₂‐2 incorporates the TTF derivative 2 , which was anchored to the solid through an amidation reaction. The final gated materials have been characterized by standard techniques. Suspensions of these solids in acetonitrile showed “zero release”, most likely because of the formation of dense TTF networks around the pore outlets. The release of the entrapped [Ru(bipy)₃]²⁺ dye from SN₃‐1 , SNH₂‐2 , and SN₃‐3 was studied in the presence of selected explosives (Tetryl, TNT, TNB, DNT, RDX, PETN, PA, and TATP). SNH₂‐2 showed a fairly selective response to Tetryl, whereas for SN₃‐1 and SN₃‐3 dye release was found to occur with Tetryl, TNT, and TNB. The uncapping process in the three materials can be ascribed to the formation of charge‐transfer complexes between the electron‐donating TTF units and the electron‐accepting nitroaromatic explosives. Finally, solids SNH₂‐2 and SN₃‐1 have been tested for Tetryl detection in soil with good results, pointing toward a possible use of these or similar hybrid capped materials as probes for the selective chromo‐fluorogenic detection of nitroaromatic explosives.     

Fluorescent Detection of 2,4‐DNT and 2,4,6‐TNT in Aqueous Media by Using Simple Water‐Soluble Pyrene Derivatives

Pyrene‐containing water‐soluble probes for the fluorescent detection of nitroaromatic compounds (NACs), such as explosive components (2,4‐DNT and 2,4,6‐TNT) and herbicides (2,4‐dinitrocresol, 2,4‐DNOC), in aqueous media are reported. In the probes, the introduction of surface‐active hydrophilic “heads” at the periphery of lipophilic (i.e., hydrophobic) pyrene “tails” resulted in the formation of highly fluorescent micelle‐like aggregates/pre‐associates in aqueous solutions at concentrations of ≤10^?5 m . The enhanced fluorescence quenching of the herein reported architectures is achieved in the presence of ultra‐trace amounts of TNT or 2,4‐DNT with values of Stern–Volmer quenching constant close to 1×10⁵ m ^?1 and a detection limit as low as 182 ppb. The most hydrophilic probes demonstrated higher response to 2,4‐DNT over TNT. Filter paper test strips impregnated with 1×10^?5 m solutions of the probes were able to detect TNT, 2,4‐DNT, and other NACs at levels as low as 50 ppb in water.     

Fe‐enriched Clay‐coated and Reduced Graphene Oxide‐modified N‐doped Polymer Nanocomposite: A Natural Recognition Element‐based Sensing Electrode for DNT

Dinitrotoluene (DNT) is a signature material of all nitro‐aromatic explosives including the lethal 2,4,6‐trinitrotoluene (TNT). A clay‐modified reduced graphene oxide (rGO)‐polymer nanocomposite was prepared as sensing electrode for the detection of (DNT) in the aquatic systems. rGO was in situ dispersed in the electro‐conductive N‐doped phenol/formaldehyde polymer and the clay ‘montmorillonite’ was coated on the nanocomposite. The clay, containing iron as one of its mineral components, served as the recognition element for DNT. Tested using electrochemical measurement techniques – cyclic voltammetry and differential pulse voltammetry, the prepared sensing electrode exhibited a low detection limit (0.0016 μM) on signal to noise ratio basis (S/N=3) and excellent linearity (R²=0.997) over 0.02–10 mg L^?1 with high sensitivity value (428 μA mM^?1 cm^?2) for DNT. The electrode showed negligible interference with the gravimetric and volumetric salts commonly present in seawater, and also, with explosive derivatives. The separate tests performed in a simulated seawater confirmed the suitability of the prepared electrode for use in field applications.     

Femtosecond laser photoionization time-of-flight mass spectrometry of nitro-aromatic explosives and explosives related compounds

The ultrafast laser-induced photoionization and photodissociation processes of the nitroaromatic containing explosive and explosive related compounds (ERCs) nitrobenzene (NB), 1,3-dinitrobenzene (DNB), m-nitrotoluene (MNT), 2,4-dinitrotoluene (DNT), and 2,4,6-trinitrotoluene (TNT) have been investigated at three laser wavelengths and power densities using a time-of-flight mass spectrometer. Examination of the mass spectra of these compounds reveals the enhanced formation of the molecular ion [M⁺] when ultraviolet (332 nm) and visible (495 nm) light is used relative to infrared (795 nm) radiation. In addition, at 795 nm and a power density of 3. 5 × 10¹⁴ W/cm², the presence of a competition between multiphoton ionization (MPI) and Coulomb explosion (CE) channels is revealed by peak shape analysis, and is thought to be operative under these conditions for all of the molecules investigated.     

Amperometric Detection of Histamine with a Pyrroloquinoline‐Quinone Modified Electrode

A modified glassy carbon (GC) electrode was developed for the amperometric detection of biogenic amines, particularly histamine. The electrode was modified with the co‐enzyme pyrroloquinoline quinone (PQQ) by entrapment during electropolymerziation of pyrrole to form polypyrrole (PPy). This method formed a thin film on the electrode surface possessing very good stability with a shelf‐life exceeding one month without loss of signal. Optimal conditions for the PQQ/PPy electrode were determined and a linear response was found for histamine in phosphate buffer (pH 6) at +550 mV from 40 to 170 mg L^?1 with a limit of detection (S/N≥3) of 38 mg L^?1. The practical linear range offered by this method suggests ideal use for spoilage detection in fermented foods.     

Sensing of 2,4,6‐Trinitrotoluene (TNT) and 2,4‐Dinitrotoluene (2,4‐DNT) in the Solid State with Photoluminescent RuII and IrIII Complexes

A series of metal–organic chromophores containing Ru^II or Ir^III were studied for the luminometric detection of nitroaromatic compounds, including trinitrotoluene (TNT). These complexes display long‐lived, intense photoluminescence in the visible region and are demonstrated to serve as luminescent sensors for nitroaromatics. The solution‐based behavior of these photoluminescent molecules has been studied in detail in order to identify the mechanism responsible for metal‐to‐ligand charge‐transfer (MLCT) excited state quenching upon addition of TNT and 2,4‐dinitrotoluene (2,4‐DNT). A combination of static and dynamic spectroscopic measurements unequivocally confirmed that the quenching was due to a photoinduced electron transfer (PET) process. Ultrafast transient absorption experiments confirmed the formation of the TNT radical anion product following excited state electron transfer from these metal complexes. Reported for the first time, photoluminescence quenching realized through ink‐jet printing and solid‐state titrations was used for the solid‐state detection of TNT; achieving a limit‐of‐quantitation (LOQ) as low as 5.6 ng cm^?2. The combined effect of a long‐lived excited state and an energetically favorable driving force for the PET process makes the Ru^II and Ir^III MLCT complexes discussed here particularly appealing for the detection of nitroaromatic volatiles and related high‐energy compounds.     

Detection of Thiols by o‐Quinone Nanocomposite Modified Electrodes

A chemically modified glassy carbon (GC) electrode was developed as an amperometric sensor for detection of biological thiols. The electrode was modified by inclusion of co‐enzyme pyrroloquinoline quinone (PQQ) and a co‐catalyst of oxidized single wall carbon nanotubes (Ox‐SWNT) into a gold polypyrrole (Au‐PPy) nanocomposite matrix. The electrode (PQQ/Ox‐SWNT/Au‐PPy/GC) was characterized using scanning electron microscopy and cyclic voltammetry. Optimal conditions for the PQQ/Ox‐SWNT/Au‐PPy/GC electrode were determined and then utilized for the amperometric detection of L‐cysteine, N‐acetyl‐L‐cysteine, L‐penicillamine and D, L‐glutathione. The electrochemical response for each thiol in pH 3.2 citrate phosphate buffer at +450 mV (vs. Ag/AgCl) was found to be linear with limit of detections (LOD, S/N=3) ranging from 0.50 µM for L‐penicillamine to 1.55 µM for D, L‐glutathione with sensitivities of 30.2 nA/µM and 3.6 nA/µM respectively. The electrode design is simple and easy to construct using a minimum amount of co‐enzyme and co‐catalyst, resulting in detection methods with very good stability and improved sensitivity for thiol detection.     

Electrochemiluminescence Detection of TNT by Resonance Energy Transfer through the Formation of a TNT–Amine Complex

2,4,6‐Trinitrotoluene (TNT) is a widely used nitroaromatic explosive with significant detrimental effects on the environment and human health. Its detection is of great importance. In this study, both electrochemiluminescence (ECL)‐based detection of TNT through the formation of a TNT–amine complex and the detection of TNT through electrochemiluminescence resonance energy transfer (ECRET) are developed for the first time. 3‐Aminopropyltriethoxysilane (APTES)‐modified [Ru(phen)₃]²⁺ (phen=1,10‐phenanthroline)‐doped silica nanoparticles (RuSiNPs) with uniform sizes of (73±3) nm were synthesized. TNT can interact with APTES‐modified RuSiNPs through charge transfer from electron‐rich amines in the RuSiNPs to the electron‐deficient aromatic ring of TNT to form a red TNT–amine complex. The absorption spectrum of this complex overlaps with the ECL spectrum of the APTES‐modified RuSiNPs/triethylamine system. As a result, ECL signals of the APTES‐modified RuSiNPs/triethylamine system are turned off in the presence of TNT owing to resonance energy transfer from electrochemically excited RuSiNPs to the TNT–amine complex. This ECRET method has been successfully applied for the sensitive determination of TNT with a linear range from 1×10^?9 to 1×10^?6 M with a fast response time within 1 min. The limit of detection is 0.3 nM . The method exhibits good selectivity towards 2,4‐dinitrotoluene, p‐nitrotoluene, nitrobenzene, phenol, p‐quinone, 8‐hydroxyquinoline, p‐phenylenediamine, K₃[Fe(CN)₆], Fe³⁺, NO₃^?, NO₂^?, Cr³⁺, Fe²⁺, Pb²⁺, SO₃^2?, formaldehyde, oxalate, proline, and glycine.     

Modification of Extended Open Frameworks with Fluorescent Tags for Sensing Explosives: Competition between Size Selectivity and Electron Deficiency

Three new electron‐rich metal–organic frameworks ( MOF‐1 – MOF‐3 ) have been synthesized by employing ligands bearing aromatic tags. The key role of the chosen aromatic tags is to enhance the π‐electron density of the luminescent MOFs. Single‐crystal X‐ray structures have revealed that these MOFs form three‐dimensional porous networks with the aromatic tags projecting inwardly into the pores. These highly luminescent electron‐rich MOFs have been successfully utilized for the detection of explosive nitroaromatic compounds (NACs) on the basis of fluorescence quenching. Although all of the prepared MOFs can serve as sensors for NACs, MOF‐1 and MOF‐2 exhibit superior sensitivity towards 4‐nitrotoluene (4‐NT) and 2,4‐dinitrotoluene (DNT) compared to 2,4,6‐trinitrotoluene (TNT) and 1,3,5‐trinitrobenzene (TNB). MOF‐3 , on the other hand, shows an order of sensitivity in accordance with the electron deficiencies of the substrates. To understand such anomalous behavior, we have thoroughly analyzed both the steady‐state and time‐resolved fluorescence quenching associated with these interactions. Determination of static Stern–Volmer constants (K_S) as well as collisional constants (K_C) has revealed that MOF‐1 and MOF‐2 have higher K_S values with 4‐NT than with TNT, whereas for MOF‐3 the reverse order is observed. This apparently anomalous phenomenon was well corroborated by theoretical calculations. Moreover, recyclability and sensitivity studies have revealed that these MOFs can be reused several times and that their sensitivities towards TNT solution are at the parts per billion (ppb) level.     

Trace Level Determination of Hydrogen Peroxide at a Carbon Ceramic Electrode Modified with Copper Oxide Nanostructures

An electrochemical sensor was developed for determination of hydrogen peroxide based on nanocopper oxides modified carbon sol‐gel or carbon ceramic electrode (CCE). The modified electrode was prepared by electrodeposition of metallic copper on the CCE surface and derivatized in situ to copper oxides nanostructures and characterized by scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques. The modified electrode responded linearly to the hydrogen peroxide (H₂O₂) concentration over the range 0.78–193.98 µmol L^?1 with a detection limit of 71 nmol L^?1 (S/N=3) and the sensitivity of 0.697 A mol^?1 L cm^?2. This electrode was used as selective amperometric sensor for determination of H₂O₂ contents in hair coloring creams.     

Glucose Biosensor Based on Multi‐Walled Carbon Nanotube Modified Glassy Carbon Electrode

An amperometric glucose biosensor based on multi‐walled carbon nanotube (MWCNT) modified glassy carbon electrode has been developed. MWCNT‐modified glassy carbon electrode was obtained by casting the electrode surface with multi‐walled carbon nanotube materials. Glucose oxidase was co‐immobilized on the MWCNT‐modified glassy carbon surface by electrochemical deposition of poly(o‐phenylenediamine) film. Enhanced catalytic electroreduction behavior of oxygen at MWCNT‐modified electrode surface was observed at a potential of ?0.40 V (vs. Ag|AgCl) in neutral medium. The steady‐state amperometric response to glucose was determined at a selected potential of ?0.30 V by means of the reduction of dissolved oxygen consumed by the enzymatic reaction. Common interferents such as ascorbic acid, 4‐acetamidophenol, and uric acid did not interfere in the glucose determination. The linear range for glucose determination extended to 2.0 mM and the detection limit was estimated to be about 0.03 mM.     

Determination of Taurine in Lycium Barbarum L. and Other Foods by Capillary Electrophoresis with Electrochemical Detection

A method based on capillary electrophoresis (CE) with electrochemical detection (ED) was developed for the determination of taurine in Lycium Barbarum L., LIPOVIYAN beverage and milk powder. The effects of some important factors such as the acidity of the running buffer, separation voltage, injection time, and applied potential to working electrode were investigated. Operated in a wall‐jet configuration, a 300 μm diameter carbon‐disk electrode was used as the working electrode, which exhibits good responses at +1.05 V (vs. SCE) for taurine. Excellent linearity was obtained in the concentration range from 5.0×10^?4 mol/L to 5.0×10^?6 mol/L. The detection limit (S/N=3) was 1.0×10^?7 mol/L. This proposed method has been successfully applied to analyze the actual samples with satisfactory assay results.     

Hydrothermal Synthesis of Three Dimensional Graphene‐Multiwalled Carbon Nanotube Nanocomposite for Enhanced Electro Catalytic Oxidation of Caffeic Acid

Three dimensional graphene‐multiwalled carbon nanotube nano composite (3DG/MWCNTs−Nc) was synthesized by simple hydrothermal method for the amperometric determination of caffeic acid (CA). The prepared nanocomposite was characterized by scanning electron microscopic technique (SEM), ultraviolet‐visible spectroscopy (UV), Raman spectroscopy and infrared spectroscopy (IR). Moreover, the interfacial electron transfer properties of the modified electrode were carried out by the electro chemical impedance spectroscopy (EIS). Besides, the electro chemical performance of the modified electrode was carried out by the cyclic voltammetry (CV) and amperometric (i‐t ) technique. The proposed electrode was exhibited an enhanced electrocatalytic activity towards the detection of CA. Under the optimal condition, the 3DG/MWCNTs−Nc modified electrode displayed a linear range from 0.2 to 174 μM, detection limit (LOD) 17.8 nM and sensitivity of 5.8308 μA μM⁻¹ cm⁻² and on applied potential + 0.2 V. These result showed, 3DG/MWCNTs−Nc modified electrodes showed good repeatability, reproducibility, and higher stability. In addition, the fabricated electrode was then successfully used to determine the CA in real samples with satisfactory recoveries. Which suggests that the 3DG/MWCNTs−Nc as a robust sensing materials for the electrochemical detection of CA.     

Simultaneous Determination of Ranitidine and Metronidazole at Glassy Carbon Electrode Modified with Single Wall Carbon Nanotubes

Single‐walled carbon nanotubes(SWCNTs) were dispersed into DMSO, and a SWCNTs‐film coated glassy carbon electrode was achieved via evaporating the solvent. The results indicated that CNT modified glassy carbon electrode exhibited efficiently electrocatalytic reduction for ranitidine and metronidazole with relatively high sensitivity, stability and life time. Under conditions of cyclic voltammetry, the potential for reduction of selected analytes is lowered by approximately 150 mV and current is enhanced significantly (7 times) in comparison to the bare glassy carbon electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for these analytes determinations by hydrodynamic amperometry. Under optimized condition in amperometric method the concentration calibration range, detection limit and sensitivity were about, 0.1–200 μM, detection limit (S/N=3) 6.3×10^?8 mol L^?1 and sensitivity 40 nA/μM for metronidazole and 0.3–270 μM 7.73×10^?8 mol L^?1 and 25 nA/μM for ranitidine. In addition, the ability of the modified electrode for simultaneous determination of ranitidine and metronidazole was evaluated. The proposed method was successfully applied to ranitidine and metronidazole determination in tablets. The analytical performance of this sensor has been evaluated for detection of these analytes in serum as a real sample.     

Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

毛细管区带电泳法分析绿茶中的痕量成份

采用毛细管电泳/安培检测法(CE/AD)同时分离测定了绿茶中的芦丁、没食子酸、槲皮素、绿原酸等生物活性成分的含量, 考察了运行缓冲液酸度、浓度、分离电压、氧化电位和进样时间等实验参数对分离、检测的影响。在最优化条件下, 以300 μm碳圆盘电极为检测电极, 检测电位为+ 950 mV (vs. SCE) , 60 mmol/L硼酸盐运行缓冲液(pH 8.7)中, 上述各组分在20 min内可实现基线分离。各组分浓度与峰电流在3个数量级范围内呈良好线性, 检出限(S/N=3)在1.0×10^-7到1.0×10^-4g^.mL^-1范围,四种标样7次平行进样的相对标准偏差(RSD)小于3.0 %。该方法已成功地应用于绿茶中生物活性成分的测定, 结果令人满意。