Dimeric and monomeric palladium(II) parent-amido (NH2) complexes: Synthesis,characterization, and reactivity

The treatment of [PdL₃(NH₃)]OTf (L₃ = (PEt₃)₂(Ph) (1), (2,6-(Cy₂PCH₂)₂C₆H₃) (3)) with NaNH₂ in THF afforded dimeric and monomeric parent-amido palladium(II) complexes with bridging and terminal NH₂, respectively, anti-[Pd(PEt₃)(Ph)(μ-NH₂)]₂ (2) and Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂) (4). The dimeric complex 2 crystallizes in the space group P2₁/n with a = 13.228(2) Å, b = 18.132(2) Å, c = 24.745(2) Å, β = 101.41(1)°, and Z = 4. It has been found that there are two crystallographically independent molecules with Pd(1)–Pd(2) and Pd(3)–Pd(4) distances of 2.9594 (10) and 2.9401(9) Å, respectively. The monomeric amido complex 4 protonates from trace amounts of water to give the cationic ammine species [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₃)]⁺. Complex 4 reacts with diphenyliodonium triflate ([Ph₂I]OTf) to give aniline complex [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂Ph)]OTf (5). Reaction of 4 with dialkyl acetylenedicarboxylate (DMAD, DEAD) yields diastereospecific palladium(II) vinyl derivative (Z)–(Pd(Cy₂PCH₂)₂C₆H₃)(CR = CR(NH₂)) (R = CO₂Me (6a), CO₂Et (6b)). Reacting complexes 6a and 6b with p-nitrophenol produces (Pd(Cy₂PCH₂)₂C₆H₃)(OC₆H₄–p-NO₂) (8) and cis-CHR = CR(NH₂), exclusively.     

Catalytic activity of Pd dithiolate complexes with large-bite-angle diphosphines in Heck coupling reactions

Palladium(II) complexes of aryl dithiolates and wide-bite-angle diphosphines Xantphos and dppf have been developed as efficient catalysts in Suzuki and Suzuki carbonylation reactions. The catalytic activity of these highly stable, discrete and charged complexes was investigated in Heck coupling reactions of styrene and a variety of aryl bromides. Under optimized reaction conditions these palladium complexes showed excellent activity with high turnover number (6 × 10⁶) and high turnover frequency (4 × 10⁵ h⁻¹). The effect of bite angle of diphosphines on the catalytic activity of the complexes [Pd₂(P^∩P)₂(SC₁₂H₈S)]₂(OTf)₄ followed the trend P^∩P = Xantphos > dppf > dppe as the order of their bite angles. The catalyst could be reused, and after three cycles the formation of significant amount of Pd nanoparticles was noticed, which were characterized using powder X-ray diffraction, energy-dispersive X-ray analysis and transmission electron microscopy. The high catalytic activity has been attributed to the Pd nanoparticles.     

Synthesis and crystal structure of a new water-soluble sulfur-containing palladacyclic diaqua complex

A new water-soluble sulfur-containing palladacyclic diaqua complex [(SC)Pd^II(H₂O)₂]₂(SO₄) {[1]₂(SO₄), SC = C₆H₄-2-(CH₂S^tBu)} was synthesized from a reaction of Ag₂SO₄ with a water-insoluble palladacyclic dichloro complex [(SC)Pd^II(μ-Cl)]₂ (2) in water. Water-solubility of [1]₂(SO₄) at pH 7 at 25 °C is 9.4 mg/mL. NH₄PF₆ was added to the solution of [1]₂(SO₄) in water to give [1](PF₆). The structures of [1](PF₆) and 2 were unequivocally determined by X-ray analysis.     

Synthesis,spectroscopic, structural and thermal characterizations of [(C7H6NO4)2TeBr6·4H2O]

Tellurium (IV) complexes with pyridine-2,6-dicarboxylate ligand were synthesized by slow evaporation from aqueous solutions yielding a new compound: [(C₇H₆NO₄)₂TeBr₆·4H₂O]. The structure of this compound was solved and refined by single-crystal X-ray diffraction. The compound is centrosymmetric P2₁/c (N°: 14) with the parameters a = 8.875(5) Å, b = 15.174(5) Å, c = 10.199(5) Å, β = 94.271° (5) and Z = 2. The structure consists of isolated H₂O, isolated [TeBr₆]^2? octahedral anions and (pyridine-2,6-dicarboxylate) [C₇H₆NO₄]⁺ cations. The stability of the structure was ensured by ionic and hydrogen bonding contacts (N–H?Br and O–H?Br) and Van-Der Walls interaction. The thermal decomposition of the compound was studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The FTIR and Raman spectroscopy at different temperatures confirm the existence of vibrational modes that correspond to the organic, inorganic and water molecular groups. Additionally, the UV–Vis diffuse reflectance spectrum was recorded in order to investigate the band gap nature. The measurements show that this compound exhibits a semiconducting behavior with an optical band gap of 2.66 eV.     

Synthesis of heteronuclear (MoRu2) clusters from 16-electron half-sandwich complexes (p-Cymene)Ru[E2C2(B10H10)] (E = S,Se)

The heterometallic cluster complexes {(p-Cymene)Ru[S₂C₂(B₁₀H₁₀)]}Mo(CO)₂{(CO)₃Ru[S₂C₂(B₁₀H₁₀)]} (2) and {(p-Cymene)Ru[Se₂C₂(B₁₀H₁₀)]}₂Mo(CO)₂ (3) (p-Cymene = η⁶-4-isopropyl-toluene) have been synthesized from the reactions of 16-electron half-sandwich ruthenium 1,2-dichalcogenolate carborane complexes (p-Cymene)Ru[E₂C₂(B₁₀H₁₀)] (E = S(1a), Se(1b)) with Mo(CO)₃(Py)₃ in the presence of BF₃ · Et₂O. The complexes of 2 and 3 were characterized by elemental analysis and IR, NMR spectra. The molecular structure of 2 has been characterized by single-crystal X-ray diffraction analysis. Complex 2 is unsymmetrical and the two Ru–Mo single bonds (2.7893(14), 2.8189(13) Å) are each supported by a symmetrically bridging o-carborane-1,2-dithiolato ligand.     

Synthesis and catalytic properties of cationic palladium(II) and rhodium(I) complexes bearing diphosphinidinecyclobutene ligands

Cationic palladium(II) and rhodium(I) complexes bearing 1,2-diaryl-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene ligands (DPCB–Y) were prepared and their structures and catalytic activity were examined (aryl = phenyl (DPCB), 4-methoxyphenyl (DPCB–OMe), 4-(trifluoromethyl)phenyl (DPCB–CF₃)). The palladium complexes [Pd(MeCN)₂(DPCB–Y)]X₂ (X = OTf, BF₄, BAr₄ (Ar = 3,5-bis(trifluoromethyl)phenyl)) were prepared by the reactions of DPCB–Y with [Pd(MeCN)₄]X₂, which were generated from Pd(OAc)₂ and HX in MeCN. On the other hand, the rhodium complexes [Rh(MeCN)₂(DPCB–Y)]OTf were prepared by the treatment of [Rh(μ-Cl)(cyclooctene)₂]₂ with DPCB–Y in CH₂Cl₂, followed by treatment with AgOTf in the presence of MeCN. The cationic complexes catalyzed conjugate addition of benzyl carbamate to α,β-unsaturated ketones.     

The dimeric unit [La(H2O)4(m-PO3C6H4COOH)(m-PO2(OH)C6H4COOH)(m-PO(OH)2C6H4COOH)]2 as building block of layered hybrid material

A new hybrid organic–inorganic material with the structural formula unit [La(H₂O)₄(m-PO₃C₆H₄COOH)(m-PO₂(OH)C₆H₄COOH)(m-PO(OH)₂C₆H₄COOH)]₂ (or [La(H₂O)₄C₂₁H₁₈O₁₅P₃]₂) has been synthesized under hydrothermal condition from La(NO₃)₃·6H₂O and 3-phosphonobenzoic acid (m-PO(OH)₂–C₆H₄–COOH) which is a rigid organic precursor possessing two types of functional groups: phosphonic acid and carboxylic acid. The two units of the produced hybrid are linked together by hydrogen bonds leading to a layered framework composing of by a repetition of inorganic and organic slices. The organic layers consist of dimeric units made of two meta-phosphono-benzoic acid linked together by hydrogen bonds involving their COOH groups. Two kinds of dimeric units are observed: PO₃C₆H₄COOH?HOOCC₆H₄PO(OH)₂, present 2 times in the structure, and PO₂(OH)C6H4COOH?HOOCC₆H₄PO₂(OH). The material crystallises in a monoclinic cell (C2/c (15) space group) with the following parameters: a = 42.515(4) Å, b = 7.4378(6) Å, c = 20.307(2) Å, β = 118.031(6)°, V = 5668.2(9) Å³, Z = 4, density = 1.908 g/cm³.     

An organoantimony complex with intramolecular N → Sb coordination as effective and recyclable catalyst for the allylation of aldehydes with tetraallyltin

An air-stable hypervalent organoantimony (III) triflate complex (PhN(CH₂C₆H₄)₂SbOSO₂CF₃) having intramolecular N → Sb coordination was synthesized and characterized by techniques such as ¹H NMR, ¹³C NMR, TG-DSC, X-ray diffraction and elemental analysis. The complex shows relatively strong Lewis acidity (0.8 < H_o ≤ 3.3). It exhibits excellent catalytic performance towards the allylation of aldehydes with tetraallyltin at room temperature, and shows good thermal stability and recyclability. The catalytic system enables convenient and efficient synthesis of homoallylic alcohols.     

Assembling of a novel 3D Ag(I)-MOFs with mixed ligands tactics: Syntheses,crystal structure and catalytic degradation of nitrophenol

A novel 3D Ag(I)-MOFs, [Ag₂(H₃ddcba)(dpp)₂] (1), which features pcu (4¹²·6³) topology were successfully synthesized. Complex 1 exhibits predominant catalytic activity towards the degradation of o-nitrophenol (2-NP), m-nitrophenol (3-NP) and p-nitrophenol (4-NP) in aqueous solution.     

Reaction of [Ru3(CO)12] with tri(2-furyl)phosphine: Di- and tri-substituted triruthenium and phosphido-bridged diruthenium complexes

Reaction of [Ru₃(CO)₁₂] with tri(2-furyl)phosphine, P(C₄H₃O)₃, at 40 °C in the presence of a catalytic amount of Na[Ph₂CO] furnishes two triruthenium complexes [Ru₃(CO)₁₀{P(C₄H₃O)₃}₂] (1) and [Ru₃(CO)₉{P(C₄H₃O)₃}₃] (2) with the ligand coordinated through the phosphorus atom. Treatment of 1 and 2 with Me₃NO at 40 °C affords the dinuclear phosphido-bridged complexes [Ru₂(CO)₆(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}] (3) and [Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}{P(C₄H₃O)₃}] (4), respectively, that are formed via phosphorus–carbon bond cleavage of a coordinated phosphine followed by coordination of the dissociated furyl moiety to the diruthenium center in a σ,π-alkenyl mode. Reaction of [Ru₃(CO)₁₂] with tri(2-furyl)phosphine in refluxing benzene gives, in addition to 3 and 4, low yields of the cyclometallated complex [Ru₃(CO)₉{μ-η¹,η¹-P(C₄H₃O)₂(C₄H₂O)}₂] (5). Treatment of 3 with EPh₃ (E = P, As, Sb) at room temperature yields the monosubstituted derivatives [Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}(EPh₃)] (E = P, 8; E = As, 9; E = Sb, 10). Similar reactions of 3 with P(C₄H₃O)₃, P(OMe)₃ and Bu^tNC yield 4, [Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}{P(OMe)₃}] (11) and [Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}(NCBu^t)] (12), respectively. The molecular structures of complexes 3, 4 and 8 have been elucidated by single crystal X-ray diffraction studies. Each complex contains a bridging σ,π-alkenyl group and while in 4 the phosphine is bound to the σ-coordinated metal atom, in 8 it is at the π-bound atom. Protonation of 3 and 4 gives the hydride complexes [(μ-H)Ru₂(CO)₆(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}]⁺ (6) and [(μ-H)Ru₂(CO)₅(μ-η¹,η²-C₄H₃O){μ-P(C₄H₃O)₂}{P(C₄H₃O)₃}]⁺ (7), respectively, while heating 3 with dimethylacetylenedicarboxylate (DMAD) in refluxing toluene gives the cyclotrimerization product, C₆(CO₂Me)₆.     

Protophilicity,electrochemical property,and desulfurization of diiron dithiolate complexes containing a functionalized C2 bridge with two vicinal basic sites

Two diiron dithiolate complexes [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅L] (L = PPh₃, 2; P(Pyr)₃, 3) containing a functionalized C₂ bridge with two vicinal basic sites were prepared and characterized as models of the FeFe-hydrogenase active site. The molecular structures of 2 and its N-protonated form [(2H_N)(OTf)] were determined by X-ray analyses of single crystals. In the solid state of [(2H_N)(OTf)]. Each asymmetric unit contains a molecule of [(2H_N)(OTf)] and a molecule of water. The molecule of water is close to the iron atom of the [Fe(CO)₃] unit (Fe···O(H₂O), 4.199 Å). The complexes 2 and 3 are relatively protophilic. ³¹P NMR spectra and cyclic voltammograms show that they can be protonated by the mild acids CCl₃COOH and CF₃COOH. Electrochemical studies show that the first reduction peak of 3 at ?1.51 V versus Fc⁺/Fc is 110 mV more positive than that (?1.62 V) found for the analogous diiron azadithiolate complex [{(μ-SCH₂)₂N(CH₂C₆H₅)}Fe₂(CO)₅P(Pyr)₃] (7). Protonation of 2 and 3 leads to the anodic shifts of 610–650 mV for the Fe^IFe^I/Fe^IFe⁰ reduction potentials. The shifts are apparently larger than that (450 mV) for protonation of 7. The reaction of the all-carbonyl complex [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅L] with two equivalents of bis(diphenylphosphino)methane (dppm) in refluxing toluene affords a desulfurized complex [(μ-S)(μ-dppm)₂Fe₂(CO)₄] (6). The reaction process was studied. A dppm mono-dentate intermediate [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₅(κ¹-dppm)] (4) and a dppm μ-bridging species [{μ-SC(NBn)CH(NHBn)S-μ}Fe₂(CO)₄(μ-dppm)] (5) have been isolated and spectroscopically characterized.     

A ruthenium(II) complex with the propionate ion: Synthesis,characterization and cytotoxic activity

The complex [Ru(η²-O₂CCH₂CH₃)(dppe)₂]PF₆ (dppe = 1,2-bis(diphenylphosphino)ethane) was prepared and characterized by elemental analysis, spectroscopic techniques, X-ray crystallography, HRESIMS and HRESIMS/MS. The characterization data are consistent with a cis arrangement for the dppe ligands and a bidentate coordination of the propionate ligand through carboxylate oxygens. Cytotoxicity assays were carried out on human and murine cancer and normal cell lines. In general, the [Ru(η²-O₂CCH₂CH₃)(dppe)₂]PF₆ complex was more cytotoxic than both its precursor cis–[RuCl₂(dppe)₂] and the reference metallodrug cisplatin. The best results against the HepG2 human tumour cell line and S180 murine tumour cell line were found with IC₅₀ values of 6.5 ± 0.2 and 0.18 ± 0.03 μM, respectively.     

Active carbon supported S-promoted Bi catalysts for acetylene hydrochlorination reaction

We synthesized a S doped Bi/AC catalyst for acetylene hydrochlorination. The addition of H₂SO₄ changes the structure of the Bi atoms in the catalyst, resulting in the improvement of the specific surface areas and catalytic efficiency of the Bi-based catalyst under reaction conditions.     

Cationic palladium(II), platinum(II) and ruthenium(II) complexes containing a chelating difluoro-substituted thiourea ligand

The fluorine substituted thiourea 2,6-F₂C₆H₃C(O)NHC(S)NEt₂ was prepared in good yield from the reaction of 2,6-F₂C₆H₃C(O)Cl with KSCN and Et₂NH in acetone. Using this compound several heteroleptic, monocationic Pd(II), Pt(II) and Ru(II) complexes of the type cis-[M{κ²S,O-2,6-F₂C₆H₃C(O)NC(S)NEt₂}(L)]PF₆ [M = Pt, Pd; L = (Ph₃P)₂, ^tBu₂bipy, 1,10-phen] as well as [Ru(η⁶-p-cym){κ²S,O-2,6-F₂C₆H₃C(O)NC(S)NEt₂}(PPh₃)]PF₆ were prepared in high yields. The compounds were characterised by spectroscopic methods and, in one case, by single crystal X-ray diffraction.     

Mono- and dinuclear cyclopalladates as catalysts for Suzuki–Miyaura cross-coupling reactions in predominantly aqueous media

Suzuki–Miyaura cross-coupling reactions of aryl halides with arylboronic acids were performed in predominantly aqueous media employing two mono- and two dinuclear cyclopalladated complexes as catalysts. These complexes are [Pd(HL)Cl] (I), [Pd(L)(PPh₃)] (II), [Pd₂(μ-dppb)(L)₂] (III) and [Pd₂(μ-dppf)(L)₂] (IV); where H₂L, dppb and dppf represent 4-methoxy-N′-(mesitylidene)benzohydrazide, 1,4-bis(diphenylphosphino)butane and 1,1′-bis(diphenylphosphino)ferrocene, respectively. The reactions were conducted using potassium carbonate as base in presence of tetrabutylammonium bromide (TBAB) at 70/90 °C in dimethylformamide–water (1:20) mixture. Among the four catalysts used, the dinuclear complex IV turned out to be the most effective and afforded moderate to excellent yields with broad substrate scope.     

Synthesis and properties of alkylruthenium complexes bearing primary and secondary amine ligands

A series of 18-electron alkylruthenium complexes, RuR[κ²(N,N′)-(S,S)-R′SO₂NCHPhCHPhNH₂](η⁶-arene) (Ph = C₆H₅, R′ = p-CH₃C₆H₄ and CH₃), bearing a N-sulfonylated diamine ligand was synthesized from the reaction of RuCl[κ²(N, N′)-(S,S)-R′SO₂NCHPhCHPhNH₂](η⁶-arene) with alkylzinc reagents, in which transmetalation proceeded smoothly to give the desired alkyl complexes in good yield and selectivity. Although the isolable amine Ru complexes bearing functionalized alkyl ligands were thermally stable, the simple methyl and ethyl Ru complexes underwent intramolecular deprotonation from NH protons to give the amido Ru complexes with release of the alkanes. The reactivity of the alkyl Ru complexes is highly affected by the structures of the arene ligands.     

Carboxylic-supported copper complexes as catalyst for the green oxidative coupling of 2,6-dimethylphenol: Synthesis,characterization and structure

Three new Cu(II) complexes with carboxylic ligand, namely {[Cu(qc)₂(py)]·4H₂O}_∞ (1), [Cu(qc)₂(4,4′-bpy)]_∞ (2) and [Cu(pc)(2,2′-bpy)(H₂O)]₂·H₂O (3) (Hqc = 3-hydroxy-2-quinoxalinecarboxylic acid, H₂pc = 4-hydroxyphthalic acid, py = pyrazine) have been synthesized and characterized. In both 1 and 2, each Cu(II) ion is coordinated by two quinoxalinecarboxylate moieties in the equatorial plane and two 4,4′-bpy or pyrazine units provide coordination in the axial positions, thus, resulting in a 1-D polymeric chain structure. Complex 3 has a dimeric structure in which two Cu(II) cations are bridged by two deprotonated pc^2? ligands and two 2,2′-bpy molecules. As heterogeneous catalysts, the title complexes showed high catalytic efficiency in the green oxidative polymerization of 2,6-dimethylphenol (DMP) to poly(1,4-phenylene ether) (PPE) in the presence of H₂O₂ as oxidant in water under mild conditions. Moreover, they allow reuse without significant loss of activity through four runs, which suggests that these catalysts are efficient, mild, and easily recyclable for the oxidative coupling of DMP. The preliminary study of the catalytic–structural correlations suggests that the coordination environment of the metal center plays an important role in the improvement of their catalytic efficiencies.     

Construction of M–M bonds in late transition metal complexes

The 16-electron Co, Rh and Ir half-sandwich complexes of Cp^#M[E₂C₂(B₁₀H₁₀)] and Cp^#M(E₂S₂C₆H₄) (M = Co, Rh, Ir, Ru; E = S, Se) containing chelating 1,2-dicarba-closo-dodecaborane-1,2-dichalcogenolato ligands and benzenedithiolato ligands are promising precursors to build multimetallic clusters by reactions with low oxidation state late transition metal reagents. Such reactions lead to successful constructions of M–M bonds between iridium, rhodium, cobalt, ruthenium, and other late transition metals. Most of these complexes have been characterized by X-ray single crystal determinations and some have been studied by computational methods. Such theoretical studies reveal the covalent bonding nature of those multinuclear complexes. Some of these clusters have been found to have interesting nonlinear optical properties.     

Ab initio crystal structure of nickel(II) hydroxy-terephthalate by synchrotron powder diffraction and magnetic study

The structure of the new hybrid compound [Ni₃(OH)₂(tp)₂(H₂O)₄]·2H₂O (tp = C₈H₄O₄²⁻) has been determined ab initio from synchrotron powder diffraction data and refined with the Rietveld method: space group P-1, a = 10.2077(6) Å, b = 8.0135(5) Å, c = 6.3337(4) Å, α = 97.70 (1)°, β = 97.21(1)°, γ = 108.77(1)°, D_x = 2.124 g/cm³, Rp = 0.045, R_B = 0.095 (757 independent reflections). H atoms were placed geometrically and their position optimized by DFT calculation. The repeating structural unit is the chain [Ni(1)O₆]₂Ni(2)O₆, consisting of two edges sharing octahedrons related by the symmetry center and linked via μ3-OH to a vertex of Ni(2) octahedron. The Ni(1) coordination is ensured by two oxygen atoms from two water molecules, two OH and two oxygen atoms from carboxylate groups. The linkage of the chains by the tp anions forms infinite layers parallel to the (010) planes. Interchain hydrogen bonds between the water molecules coordinating the metal ensure the cohesion of the 2D structure. The structural and magnetic properties are compared with that of the 3D fumarate-based compound [Ni₃(OH)₂(fum)₂(H₂O)₄]·2H₂O (fum = C₄H₂O₄²⁻).     

Synthesis,structures and magnetic properties of two hexanuclear complexes

The reaction of salicylaldoxime (H₂salox) with Mn(ClO₄)₂ · 6H₂O, NaN(CN)₂ and NEt₃ in MeOH affords a Mn^III₆ hexanuclear complex of [Mn₆O₂(salox)₆(MeOH)₆(NCNCONH₂)₂] (1), while reaction of H₂salox with MnCl₂ · 4H₂O and NEt₄OH in EtOH affords a Mn^III₆ hexanuclear complex of [Mn₆O₂(salox)₆(EtOH)₄(H₂O)₂Cl₂] (2). Both complexes 1 and 2 contain a [Mn^III₆(μ₃-O)₂]¹⁴⁺ core, which is a known structural type in the family of Mn₆ complexes. Variable temperature magnetic susceptibilities and magnetization measurement of complexes 1 and 2 have been carried out. Exchange interactions of metal centers for complexes 1 and 2 are fitted by a full diagonalization matrix method. The fitting results indicate that both complexes 1 and 2 have the ground-state spin value of S = 4, and the ground state of complex 1 has the much closer energy to low-lying spin states than that of complex 2. Magnetization measurements at 2.0–4.0 K and 10–70 kG confirm that the ground state is S = 4, with significant magnetoanisotropy as gauged by the D value of ?0.82 cm^?1 and ?1.18 cm^?1, for 1 and 2, respectively. The frequency dependence of the out-of-phase component in alternating current magnetic susceptibilities for both complexes 1 and 2 indicates the slow magnetic relaxation of superparamagnetic behaviour with a U_eff of 27.0(1) K and τ₀ = 3.8(2) × 10^?9 s for complex 1, and U_eff of 25.1(6) K and τ₀ = 4.6(1) × 10^?8 s for complex 2.