气相色谱-燃烧-同位素比值质谱法分析氨基酸氮稳定同位素并初步评估水生生物体营养级

氨基酸稳定氮同位素(δ15 N)分析能准确有效地评估生物体的营养级以及氮在食物链中的流动.本研究优化了氨基酸氮同位素的分析方法:样品在酸性条件下水解后,释放出的蛋白质氨基酸经阳离子交换树脂纯化后,衍生为对应的N-新戊酞基,O-异丙醇(N-pivaloyl-isopropyl,NPP)酯,利用气相色谱-燃烧-同位素比值质谱仪(Gas chromatography-combustion-isotope ratio mass spectrometry,GC-C-IRMS)测定其δ15 N.经非极性气相色谱柱DB-5ms分离后,13种氨基酸NPP酯衍生物均可得到良好的基线分离.在样品量不低于20 ng N条件下,GC-C-IRMS方法的精密度优于1‰,测得的δ15 N值与EA-IRMS法测得的δ15 N值没有明显差异.阳离子树脂纯化前后各氨基酸δ15 N值差异低于1‰,表明没有产生明显的同位素分馏.采用本方法成功地估算了阿哈湖生态系统中常见水生生物的营养级,可作为研究氨基酸代谢以及生态系统特征的新方法.     

Mammalian DNA δ15N exhibits 40‰ intramolecular variation and is unresponsive to dietary protein level

We report the first high‐precision characterization of molecular and intramolecular δ¹⁵N of nucleosides derived from mammalian DNA. The influence of dietary protein level on brain amino acids and deoxyribonucleosides was determined to investigate whether high protein turnover would alter amino acid ¹⁵ N or ¹³ C values. Pregnant guinea pig dams were fed control diets, or high or low levels of dietary protein throughout gestation, and all pups were fed control diets. The cerebellar DNA of offspring was extracted at 2 and 120 days of life, nucleosides isolated and δ¹⁵N and δ¹³C values characterized. Mean diet δ¹⁵N was 0.45 ± 0.33‰, compared with cerebellar whole tissue and DNA δ¹⁵N = +4.1 ± 0.7‰ and ?4.5 ± 0.4‰, respectively. Cerebellar deoxythymidine (dT), deoxycytidine (dC), deoxyadenosine (dA), and deoxyguanosine (dG) δ¹⁵N were +1.4 ± 0.4, –2.1 ± 0.9, –7.2 ± 0.3, and ?10.4 ± 0.5‰, respectively. There were no changes in amino acid or deoxyribonucleoside δ¹⁵N values due to dietary protein level. Using known metabolic relationships, we developed equations to calculate the intramolecular δ¹⁵N values originating from aspartate (asp) in purines (pur) or pyrimidines (pyr), glutamine (glu), and glycine (gly) to be δ¹⁵N_ASP‐PUR, δ¹⁵N_ASP‐PYR, δ¹⁵N_GLN, and δ¹⁵N_GLY +11.9 ± 2.3‰, +7.0 ± 2.0‰, –9.1 ± 2.4‰, and ?31.8 ± 8.9‰, respectively. A subset of twelve amino acids from food and brain had mean δ¹⁵N values of 4.3 ± 3.2‰ and 13.8 ± 3.1‰, respectively, and δ¹⁵N values for gly and asp were 12.6 ± 2.2‰ and 15.2 ± 0.8‰, respectively. A separate isotope tracer study detected no significant turnover of cerebellar DNA in the first six months of life. The large negative δ¹⁵N difference between gly and cerebellar purine N at the gly (7) position implies either that there is a major isotope effect during DNA synthesis, or that in utero gly has a different isotope ratio during rapid growth and metabolism from that in adult life. Our data show that cerebellar nucleoside intramolecular δ¹⁵N values vary over more than 40‰ and are not influenced by dietary protein level or age. Copyright © 2011 John Wiley & Sons, Ltd.     

A pilot study for the intrinsic labeling of egg proteins with 15N and 13C

The aim of this study was to produce intrinsically and uniformly doubly (15)N-(13)C-labeled proteins. These proteins can be used as intrinsic tracers of dietary amino acids, both α-amino groups and carbon skeletons, during postprandial metabolic utilization. Two (Rhodes) laying hens were fed for 16 days with a standard poultry diet supplemented with 0, 0.2% or 0.4% of a mixture of 20 doubly (15)N-(13)C-labeled AAs. A third hen was given a non-enriched diet, as the control. The eggs laid were collected over 24 days, from 3 days before to 4 days after supplementation. The (15)N and (13)C enrichments in proteins from white and yolk were measured by EA-IRMS and GC-C-IRMS for enrichment in individual amino acids. After 10 days of supplementation, the (15)N enrichment reached an isotopic plateau at 1500 to 3000 ‰, depending on the supplementation level, in both white and yolk while the (13)C enrichment was 220 to 650 ‰ in white and was 100 to 250 ‰ in yolk. The (15)N enrichment was similar among the amino acids, except for the aromatic ones in which the enrichment was lower. The δ(13)C values were variable among amino acids in both white and yolk, ranging from 77 ‰ for tyrosine to 555 ‰ for proline with the 0.2 % supplementation level. In conclusion, the incorporation of 0.2 % labeled amino acids in the hen diet allowed us to achieve sufficient enrichment for metabolic studies. However, due to the non-homogeneity of the (13)C labeling, adequate (13)C enrichment of individual amino acids must be considered depending on the investigated metabolic pathway.     

Measurement of 13C and 15N isotope labeling by gas chromatography/combustion/isotope ratio mass spectrometry to study amino acid fluxes in a plant-microbe symbiotic association

We have developed a method based on a double labeling with stable isotopes and gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) analyses to study amino acid exchange in a symbiotic plant-microbe association. Isotopic precision was studied for 21 standards including 15 amino acid derivatives, three N-protected amino acid methyl esters, three amines and one international standard. High correlations were observed between the δ(13)C and δ(15)N values obtained by GC/C/IRMS and those obtained by an elemental analyzer (EA) coupled to an isotope ratio mass spectrometer (R(2) = 0.9868 and 0.9992, respectively). The mean precision measured was 0.04‰ for δ(13)C and 0.28‰ for δ(15)N (n = 15). This method was applied in vivo to the symbiotic relationship between alfalfa (Medicago sativa L.) and N(2)-fixing bacteria. Plants were simultaneously labeled over 10 days with (13)C-depleted CO(2) ((12)CO(2)), which was assimilated through photosynthesis by leaves, and (15)N(2) fixed via nodules. Subsequently, the C and N isotope compositions (i.e. δ(13)C and δ(15)N) of free amino acids were analyzed in leaves and nodules by GC/C/IRMS. The method revealed the pattern of C and N exchange between leaves and nodules, highlighting that γ-aminobutanoic acid and glycine may represent an important form of C transport from leaves to the nodules. The results confirmed the validity, reliability and accuracy of the method for assessing C and N fluxes between plants and symbiotic bacteria and support the use of this technique in a broad range of metabolic and fluxomic studies.     

Measurements of nitrogen isotope composition of plants and surface soils along the altitudinal transect of the eastern slope of Mount Gongga in southwest China

The natural abundances of stable nitrogen isotopes in plants and soils have been viewed as recorders that can be used to reconstruct paleoclimate and ecological processes or to indicate the biogeochemical cycle of nitrogen in nature. This study systematically measured the nitrogen isotope composition (δ¹⁵N) in plants and surface soils along an altitudinal transect of elevation range of 1200 to 4500 m on the eastern slope of Mount Gongga in southwest China. The influences of photosynthetic pathways on plant δ¹⁵N as well as the effects of temperature and precipitation on δ¹⁵N altitudinal trends in plants and surface soils are discussed. Across this altitude transect, the δ¹⁵N values of C₃ and C₄ plants on Mount Gongga range between ?9.87‰ and 7.58‰ with a mean value of ?1.33‰, and between ?3.98‰ and 4.38‰ with a mean value of ?0.25‰, respectively. There is an evident δ¹⁵N difference between C₃ plants and C₄ plants. If, however, you only compare C₄ plants with those C₃ plants growing at the same altitudinal range, no significant difference in δ¹⁵N exists between them, suggesting that photosynthetic pathway does not have an influence on the plant δ¹⁵N values. In addition, we found that C₃, C₄ plants and surface soil (0–5 cm depth) all trend significantly towards more negative δ¹⁵N with increasing elevation. Furthermore, this study shows that the mean annual temperature and the mean annual precipitation positively and negatively correlate with δ¹⁵N in C₃ and C₄ plants, respectively. This indicates that precipitation and temperature are the main controlling factors of the δ¹⁵N variation in plants with altitude. We propose that lower δ¹⁵N values of plants and soils at higher altitude should be attributed to lower mineralization and lower net nitrification rates induced by low temperature and abundant rainfall. Copyright © 2010 John Wiley & Sons, Ltd.     

Geographical traceability of wheat and its products using multielement light stable isotopes coupled with chemometrics

The present study was aimed to investigate the variation of stable isotopic ratios of carbon, nitrogen, hydrogen, and oxygen in wheat kernel along with different processed fractions from three geographical origins across 5 years using isotope ratio mass spectrometry (IRMS). Multiway ANOVA revealed significant differences among region, harvest year, processing, and their interactions for all isotopes. The region contributed the major variability in the δ¹³C ‰, δ²H ‰, δ¹⁵N ‰, and δ¹⁸O‰ values of wheat. Variation of δ¹³C ‰, δ¹⁵N ‰, and δ¹⁸O ‰ between wheat whole kernel and its products (break, reduction, noodles, and cooked noodles) were ?0.7‰, and no significant difference was observed, suggesting the reliability of these isotope fingerprints in geographical traceability of wheat‐processed fractions and foods. A significant influence of wheat processing was observed for δ²H values. By applying linear discriminant analysis (LDA) to the whole dataset, the generated model correctly classified over 91% of the samples according to the geographical origin. The application of these parameters will assist in the development of an analytical control procedure that can be utilized to control the mislabeling regarding geographical origin of wheat kernel and its products.     

Practical recommendations for the reduction of memory effects in compound-specific 15N/14N-ratio analysis of enriched amino acids by gas chromatography/combustion/isotope ratio mass spectrometry

Gas chromatography/combustion/isotope ratio mass spectrometry (GC-C-IRMS) is a highly sensitive approach which allows the analysis of the (13)C/(12)C and (15)N/(14)N isotope composition of amino acids in the range of natural abundance or in slightly (13)C- and (15)N-enriched samples. However, the accuracy of measurements remains a permanent challenge. Here we show the effect of the presence of slightly (15)N-enriched compounds in physiological samples on the accuracy and reproducibility of (15)N-abundances of amino acids within or between analytical runs. We spiked several individual amino acids with the respective (15)N-labelled isotopomer and measured the (15)N/(14)N ratios of other amino acids in the same sample or in the following analytical runs. Intra- and inter-run memory effects can be observed in (15)N/(14)N ratios of amino acids. Sample throughput is reduced when cleaning runs using standard mixtures are required to restore initial conditions after runs of samples with (15)N-enriched analytes. Possible reasons for the observed phenomenon and its implications for work in the lower (15)N-enrichment range (<0.5 APE) are discussed and include different aspects of gas chromatography, derivatisation, and hot catalytic metal surface effects. Results need to be interpreted with caution if complex physiological samples contain (15)N-enriched amino acids beyond 500‰ δ(15)N (~0.18 APE).     

Nitrogen isotopic analyses by isotope-ratio-monitoring gas chromatography / mass spectrometry

Amino acids containing natural-abundance levels of ¹⁵N were derivatized and analyzed isotopically using a technique in which individual compounds are separated by gas chromatography, combusted on-line, and the product stream sent directly to an isotope-ratio mass spectrometer. For samples of N₂ gas, standard deviations of ratio measurement were better than 0.1‰ (Units for δ are parts per thousand or per million (‰).) for samples larger than 400 pmol and better than 0.5‰ for samples larger than 25 pmol (0.1‰ ¹⁵N is equivalent to 0.00004 atom % ¹⁵N). Results duplicated those of conventional, batchwise analyses to within 0.05‰. For combustion of organic compounds yielding CO₂/N₂ ratios between 14 and 28, in particular for N-acetyl n-propyl derivatives of amino acids, δ values were within 0.25‰ of results obtained using conventional techniques and standard deviations were better than 0.35‰. Pooled data for measurements of all amino acids produced an accuracy and precision of 0.04 and 0.23‰, respectively, when 2 mnol of each amino acid was injected on column and 20% of the stream of combustion products was delivered to the mass spectrometer.     

Strong anion exchange liquid chromatographic separation of protein amino acids for natural 13C-abundance determination by isotope ratio mass spectrometry

Amino acids are the building blocks of proteins and the analysis of their ¹³C abundances is greatly simplified by the use of liquid chromatography (LC) systems coupled with isotope ratio mass spectrometry (IRMS) compared with gas chromatography (GC)‐based methods. To date, various cation exchange chromatography columns have been employed for amino acid separation. Here, we report strong anion exchange chromatography (SAX) coupled to IRMS with a Liquiface interface for amino acid δ¹³C determination. Mixtures of underivatised amino acids (0.1–0.5 mM) and hydrolysates of representative proteins (prawns and bovine serum albumin) were resolved by LC/IRMS using a SAX column and inorganic eluents. Background inorganic carbon content was minimised through careful preparation of alkaline reagents and use of a pre‐injector on‐line carbonate removal device. SAX chromatography completely resolved 11 of the 16 expected protein amino acids following acid hydrolysis in underivatised form. Basic and neutral amino acids were resolved with 35 mM NaOH in isocratic mode. Elution of the aromatic and acidic amino acids required a higher hydroxide concentration (180 mM) and a counterion (NO, 5–25 mM). The total run time was 70 min. The average δ¹³C precision of baseline‐resolved peaks was 0.75‰ (range 0.04 to 1.06‰). SAX is a viable alternative to cation chromatography, especially where analysis of basic amino acids is important. The technology shows promise for ¹³C amino acid analysis in ecology, archaeology, forensic science, nutrition and protein metabolism. Copyright © 2011 John Wiley & Sons, Ltd.     

Diet discrimination factors are inversely related to δ15 N and δ13C values of food for fish under controlled conditions

A recent literature review reported negative relationships between diet discrimination factors (DDFs = X_fish – X_food; X = δ¹⁵N or δ¹³C) and the values of δ¹⁵N and δ¹³C in the food of wild organisms but there has been no laboratory‐based confirmation of these relationships to date. Laboratory reared guppies (Poecilia reticulata) fed a series of diets with a range of δ¹³C (?22.9 to ?6.6‰) and δ¹⁵N (6.5 to 1586‰) values were used to magnify diet‐tissue dynamics in order to calculate DDFs once the fish had achieved equilibrium with each of the diets. Values of DDFs range widely for δ¹⁵N (7.1 to ?849‰) and δ¹³C (1.1 to ?7.0‰) and showed a strong negative correlation with the stable isotope value in the food for δ¹⁵N (slope = ?0.59 ± 0.02, r² = 0.95) and δ¹³C (slope = ?0.56 ± 0.02, r² = 0.94). Based on these relationships, the magnitude of DDF change over environmentally relevant values of δ¹⁵N or δ¹³C would be significant and could confound the interpretation of stable isotopes in the environment. Using highly enriched experimental diets, our study adds to a growing number of studies that undermine the consistent trophic enrichment paradigm with results that demonstrate the currently poor mechanistic understanding of how DDFs arise. The results of our study highlight that the magnitude of the stable isotope values in prey must be considered when choosing DDF values. Future laboratory studies should therefore be directed at uncovering the mechanistic basis of DDFs and, like others before, we recommend the determination of diet‐dependent DDFs under laboratory conditions before modeling dietary proportions or calculating trophic positions. Copyright © 2010 John Wiley & Sons, Ltd.     

Liquid chromatography/isotope ratio mass spectrometry measurement of δ13C of amino acids in plant proteins

In archaeological studies, the isotopic enrichment values of carbon and nitrogen in bone collagen give a degree of information on dietary composition. The isotopic enrichments of individual amino acids from bone collagen and dietary protein have the potential to provide more precise information about the components of diet. A limited amount of work has been done on this, although the reliability of these studies is potentially limited by fractionation arising through hydrolysis of whole plant tissue (where reaction between amino acids and carbohydrates may occur) and, for certain amino acids, the use of derivatives (particularly trifluoroacetyl derivatives) for gas chromatography/isotope ratio mass spectrometry (GC/IRMS) analysis. The present study takes the approach of extracting the protein components of plant tissues before hydrolysis and using liquid chromatography/isotope ratio mass spectrometry (LC/IRMS), which does not require derivatisation, for measurement of the isotopic enrichment of the amino acids. The protocol developed offers a methodology for consistent measurement of the δ(13)C values of amino acids, allowing isotopic differences between the individual amino acids from different plant tissues to be identified. In particular, there are highly significant differences between leaf and seed protein amino acids (leaf minus grain) in the cases of threonine (-4.1‰), aspartic acid (+3.5‰) and serine (-3.2‰). In addition to its intended application in archaeology, the technique will be of value in the fields of plant sciences, nutrition and environmental food-web studies.     

Development of an enantiomer-specific stable carbon isotope analysis (ESIA) method for assessing the fate of α-hexachlorocyclo-hexane in the environment

α-Hexachlorocyclohexane (α-HCH) is the only chiral isomer of the eight 1,2,3,4,5,6-HCHs and we have developed an enantiomer-specific stable carbon isotope analysis (ESIA) method for the evaluation of its fate in the environment. The carbon isotope ratios of the α-HCH enantiomers were determined for a commercially available α-HCH sample using a gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS) system equipped with a chiral column. The GC-C-IRMS measurements revealed δ-values of -32.5 ± 0.8‰ and -32.3 ± 0.5‰ for (-) α-HCH and (+) α-HCH, respectively. The isotope ratio of bulk α-HCH was estimated to be -32.4 ± 0.6‰ which was in accordance with the δ-values obtained by GC-C-IRMS (-32.7 ± 0.2‰) and elemental analyzer-isotope ratio mass spectrometry (EA-IRMS) of the bulk α-HCH (-32.1 ± 0.1‰). The similarity of the isotope ratio measurements of bulk α-HCH by EA-IRMS and GC-C-IRMS indicates the accuracy of the chiral GC-C-IRMS method. The linearity of the α-HCH ESIA method shows that carbon isotope ratios can be obtained for a signal size above 100 mV. The ESIA measurements exhibited standard deviations (2σ) that were mostly < ± 0.5‰. In order to test the chiral GC-C-IRMS method, the isotope compositions of individual enantiomers in biodegradation experiments of α-HCH with Clostridium pasteurianum and samples from a contaminated field site were determined. The isotopic compositions of the α-HCH enantiomers show a range of enantiomeric and isotope patterns, suggesting that enantiomeric and isotope fractionation can serve as an indicator for biodegradation and source characterization of α-HCH in the environment.     

Stable isotopic analysis of pyrogenic organic matter in soils by liquid chromatography–isotope‐ratio mass spectrometry of benzene polycarboxylic acids

Pyrogenic organic matter (PyOM), the incomplete combustion product of organic materials, is considered stable in soils and represents a potentially important terrestrial sink for atmospheric carbon dioxide. One well‐established method of measuring PyOM in the environment is as benzene polycarboxylic acids (BPCAs), a compound‐specific method, which allows both qualitative and quantitative estimation of PyOM. Until now, stable isotope measurement of PyOM carbon involved measurement of the trimethylsilyl (TMS) or methyl (Me) polycarboxylic acid derivatives by gas chromatography–combustion–isotope ratio mass spectrometry (GC‐C‐IRMS). However, BPCA derivatives can contain as much as 150% derivative carbon, necessitating post‐analysis correction for the accurate measurement of δ¹³ C values, leading to increased measurement error. Here, we describe a method for δ¹³ C isotope ratio measurement and quantification of BPCAs from soil‐derived PyOM, based on ion‐exchange chromatography (IEC‐IRMS). The reproducibility of the δ¹³ C measurement of individual BPCAs by IEC‐IRMS was better than 0.35‰ (1σ). The δ¹³ C‐BPCA analysis of PyOM in soils, including at natural and artificially enriched ¹³ C‐abundance, produced accurate and precise δ¹³ C measurements. Analysis of samples that differed in δ¹³ C by as much as 900‰ revealed carryover of <1‰ between samples. The weighted sum of individual δ¹³ C‐BPCA measurements was correlated with previous isotopic measurements of whole PyOM, providing complementary information for bulk isotopic measurements. We discuss potential applications of δ¹³ C‐BPCA measurements, including the study of turnover rates of PyOM in soils and the partitioning of PyOM sources based on photosynthetic pathways. Copyright © 2011 John Wiley & Sons, Ltd.     

Stable Isotope Fingerprinting for Pharmaceutical Authentication

ABSTRACT

The ¹³C stable isotopic composition of 38 pharmaceutical products was investigated for six medicine analgesics classes ibuprofen, diclofenac, paracetamol, metamizole, ketoprofene, and combinations containing paracetamol to evaluate differences between manufacturers and production batches. Complementary measurements were performed by inductively coupled plasma-mass spectrometry. Linear discriminant analysis was applied on experimental obtained data set for differentiation of three investigated drug types. The carbon isotopic compositions were between ?32.9 and ?22.6‰. The lowest values of ¹³C (mean of ?31.3‰) were obtained for metamizole from all six categories of investigated analgesics. The highest δ¹³C values were obtained for diclofenac (mean of ?25.9‰). The most accurate elemental predictors were V, Al, Sb, As, Pb, and Mn.     

Determination of the natural abundance δ15N of taurine by gas chromatography-isotope ratio measurement mass spectrometry

The measurement of the nitrogen isotope ratio of taurine (2-aminoethanesulphonic acid) in biological samples has a large number of potential applications. Taurine is a small water-soluble molecule which is notoriously difficult to analyze due to its polarity and functionality. A method is described which allows the determination of the natural abundance δ(15)N values of taurine and structural analogues, such as 3-amino-1-propanesulphonic acid (APSA), by isotope ratio mass spectrometry interfaced to gas chromatography (GC-irm-MS). The one-step protocol exploits the simultaneous derivatization of both functionalities of these aminosulphonic acids by reaction with triethylorthoacetate (TEOA). Conditions have been established which ensure quantitative reaction thus avoiding any nitrogen isotope fractionation during derivatization and workup. The differences in the δ(15)N values of derivatized and non-derivatized taurine and APSA all fall within the working range of 0.4‰ (-0.02 to 0.39‰). When applied to four sources of taurine with various δ(15)N values, the method achieved excellent reproducibility and accuracy. The optimized method enables the determination of the natural abundance δ(15)N values of taurine over the concentration range 1.5-7.84 μmol.mL(-1) in samples of biological origin.     

A suite of sensitive chemical methods to determine the δ15N of ammonium, nitrate and total dissolved N in soil extracts

Natural ¹⁵N abundances (δ¹⁵N values) of different soil nitrogen pools deliver crucial information on the soil N cycle for the analysis of biogeochemical processes. Here we report on a complete suite of methods for sensitive δ¹⁵N analysis in soil extracts. A combined chemical reaction of vanadium(III) chloride (VCl₃) and sodium azide under acidic conditions is used to convert nitrate into N₂O, which is subsequently analyzed by purge‐and‐trap isotope ratio mass spectrometry (PTIRMS) with a cryo‐focusing unit. Coupled with preparation steps (microdiffusion for collection of ammonium, alkaline persulfate oxidation to convert total dissolved N (TDN) or ammonium into nitrate) this allows the determination of the δ¹⁵N values of nitrate, ammonium and total dissolved N (dissolved organic N, microbial biomass N) in soil extracts with the same basic protocol. The limits of quantification for δ¹⁵N analysis with a precision of 0.5‰ were 12.4 µM for ammonium, 23.7 µM for TDN, 16.5 µM for nitrate and 22.7 µM for nitrite. Copyright © 2010 John Wiley & Sons, Ltd.     

An Assessment of Sample Preservation Methods for the Determination of Stable Carbon and Nitrogen Isotope Ratios in Mollusks

The aim of this study was to quantify the effects of preservation methods and preservation times on the stable carbon and nitrogen isotope values in the tissues of six mollusk species (Mytilus edulis, Crassostrea gigas, Ruditapes philippinarum, Acanthochiton seulschnochilon, Littorina brevicula, and Rapana venosa). To identify potential preservation effects on δ¹³C and δ¹⁵N values and to examine temporal changes in the effects of preservation, repeated analyses were carried out after 1 day, 5 days, 15 days, 1 month, 3 months, 6 months, and 12 months of preservation. The results showed that drying preservation was the most suitable method for preserving samples, while freezing and chemical preservation significantly affected the stable isotope values compared with those of the controls. The effects of preservatives on the tissues of different mollusk species were statistically significant for both δ¹³C and δ¹⁵N values. Shifts in the δ¹³C and δ¹⁵N values, due to freezing and chemical preservation, were higher in Acanthochiton seulschnochilon, Littorina brevicula, and Rapana venosa than in the other three species. The effects of preservatives on carbon isotope values were variable. In most cases, the shift of the δ¹³C values from the control samples were less than 1% for those of the treated samples. The δ¹³C and δ¹⁵N data from the preserved samples could thus be used in food web reconstruction studies. Further studies will be necessary, however, in order to elucidate the effects of preservation type and time on other species.     

Geographical Discrimination of Honeysuckle (Lonicera japonica Thunb.) from China by Characterization of the Stable Isotope Ratio and Multielemental Analysis

A total of 117 honeysuckle (Lonicera japonica Thunb.) samples from four major regions of production in China, including Fengqiu in Henan, Pingyi in Shandong, Julu in Hebei, and Xiushan in Chongqing, were analyzed to determine their geographical origin. δ¹³C, δ¹⁵N, and δ¹⁸O values were determined by isotope ratio mass spectrometry (IRMS), and the contents of 18 elements (Fe, Mn, Cu, Zn, K, Ca, Mg, Pb, Cd, Cr, As, Hg, Se, Sr, Ni, Co, B, and Mo) were measured by inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS). Multivariate statistical analysis by analysis of variance (ANOVA), principal component analysis (PCA), and linear discriminant analysis (LDA) were performed. The results showed that there were very significant differences in the stable isotope ratios and elemental concentrations in honeysuckle based on geographical origin, with plants from each region having a unique fingerprint. Discriminant functions were established to distinguish the origin of honeysuckle using suitable indicators including Cd, Cr, As, Hg, Se, Co, Ni, Sr, Fe, δ¹³C, δ¹⁵N, and δ¹⁸O. Cross-validated cases of 95.7% were correctly classified.     

Error assessment of nitrogen and oxygen isotope ratios of nitrate as determined via the bacterial denitrification method

Currently, bacterial denitrification is becoming the accepted method for δ¹⁵N‐ and δ¹⁸O‐NO determination. However, proper correction methods with international references (USGS32, USGS34 and USGS35) are needed. As a consequence, it is important to realize that the corrected isotope values are derived from a combination of several other measurements with associated uncertainties. Therefore, it is necessary to consider the propagated uncertainty on the final isotope value. This study demonstrates how to correctly estimate the uncertainty on corrected δ¹⁵N‐ and δ¹⁸O‐NO values using a first‐order Taylor series approximation. The bacterial denitrification method errors from 33 batches of 561 surface water samples varied from 0.2 to 2.1‰ for δ¹⁵N‐NO and from 0.7 to 2.3‰ for δ¹⁸O‐NO, which is slightly wider than the machine error, which varied from 0.2 to 0.6‰ for δ¹⁵N‐N₂O and from 0.4 to 1.0‰ for δ¹⁸O‐N₂O. The overall uncertainties, which are composed of the machine error and the method error, for the 33 batches ranged from 0.3 to 2.2‰ for δ¹⁵N‐NO and from 0.8 to 2.5‰ for δ¹⁸O‐NO. In addition, the mean corrected δ¹⁵N and δ¹⁸O values of 132 KNO₃‐IWS (internal working standard) measurements were computed as 8.4 ± 1.0‰ and 25.1 ± 2.0‰, which is a slight underestimation for δ¹⁵N and overestimation for δ¹⁸O compared with the accepted values (δ¹⁵N = 9.9 ± 0.3‰ and δ¹⁸O = 24.0 ± 0.3‰). The overall uncertainty of the bacterial denitrification method allows the use of this method for source identification of NO. Copyright © 2010 John Wiley & Sons, Ltd.