Donor-Acceptor Aminocyclobutane Monoesters: Synthesis and Silylium-Catalyzed (4+2) Annulation with Indoles

A convenient one-step synthesis of β-aminocyclobutane monoesters starting from commercially available reagents is reported. The obtained strained rings undergo (4+2) dearomative annulation with indole partners using silylium catalysis. This organocatalyzed annulation provided tricyclic indolines with four new stereocenters in up to quantitative yield and >95 : 5 diastereoselectivity and can proceed both intra- and intermolecularly. When performed intramolecularly, the tetracyclic structure of either akuamma or malagasy alkaloids was obtained selectively depending on the temperature of the reaction. This divergent outcome could be rationalized based on DFT calculations.     

Infrared Spectroscopy Evidence of Weak Interactions in Frustrated Lewis Pairs Formed by Tris(pentafluorophenyl)borane

Frustrated Lewis pairs (FLPs) have been widely investigated as promising catalysts due to their metal-free feature and ability to activate small molecules. Since their discovery, many works have been investigating how these Lewis pairs (intermolecular pairs) are held together in an encounter complex. This prompted several studies based on theoretical investigations, but experimental ones are limited yet. In this communication we show evidence of weak intermolecular interactions between Lewis acids and Lewis bases, distinguishing the Lewis adduct from FLPs, by probing fluorine-carbon vibrational modes using infrared spectroscopy. The main evidence is based on the band shifts occurring in FLPs due to weak hydrogen bonds between the hydrogen atoms of the Lewis base and the fluorine atoms of Lewis acid.     

Tris(pentafluorophenyl)borane catalyzed Ferrier azaglycosylation with sulfonamides and carbamates

The reaction of tri-O-acetyl-d-glucal with different nitrogen nucleophiles was effectively promoted by a catalytic amount of tris(pentafluorophenyl)borane for the first time in acetonitrile at room temperature to produce a variety of azapseudoglycals via Ferrier rearrangement in good yields and preferential anomeric selectivity.     

Tris(pentafluorophenyl)borane catalyzed acylation of alcohols,phenols, amines,and thiophenols under solvent-free condition

The acylation of alcohols, phenols, amines, and thiophenols was accomplished with 0.5 mol % of tris(pentafluorophenyl)borane [B(C₆F₅)₃] at ambient temperature under solvent-free condition. Major advantages of this method include high yield, short reaction time, simple procedure, compatibility with sensitive protecting groups as well as other functional groups, absence of racemization of optical active compounds, and epimerization of sugars.     

Highly Sensitive NH(3) Detection Based on Organic Field-Effect Transistors with Tris(pentafluorophenyl)borane as Receptor

We have increased organic field-effect transistor (OFET) NH(3) response using tris(pentafluorophenyl)borane (TPFB) as a receptor. OFETs with this additive could detect concentrations of 450 ppb v/v, with a limit of detection of 350 ppb, the highest sensitivity reported to date for semiconductor films; in comparison, when triphenylmethane (TPM) or triphenylborane (TFB) was used as an additive, no obvious improvement in the sensitivity was observed. These OFETs also showed considerable selectivity with respect to common organic vapors and stability toward storage. Furthermore, excellent memory of exposure was achieved by keeping the exposed devices in a sealed container stored at -30 °C, the first such capability demonstrated with OFETs.     

Synthesis of Uniquely Branched Polyethylene by Anilinonaphthoquinone Ligated Nickel Complex Activated with Tris(pentafluorophenyl)borane

Summary: A novel nickel complex ligated with 2‐(2,6‐diisopropylanilino)‐1,4‐naphthoquinone ( 1 ) was synthesized. The molecular structure of 1 determined by X‐ray analysis was a square‐planar geometry. Complex 1 conducted ethylene polymerization at 40 °C in a low activity to give linear polyethylene. On the other hand, 1 activated with 4 eq. of B(C₆F₅)₃ was highly active for ethylene polymerization and gave a polymer possessing short chain branches of methyl, ethyl and propyl groups formed by a chain walking mechanism, as well as long chain branches, of which the content was almost the same as the total content of short chain branches. These results suggest that the macromonomer formed via β‐hydride elimination should have effectively copolymerized with ethylene to give the long chain branches in the B(C₆F₅)₃‐activated system.

     

Carboboration Reactions of 1,2‐Bis[(diarylphosphino)ethynyl]benzenes with Tris(pentafluorophenyl)borane

The 1,2‐bis[(diarylphosphino)ethynyl]benzene derivatives 1a (R=Ph) and 1b (R=o‐tolyl) undergo 1,1‐carboboration at one of their acetylene units upon treatment with (C₆F₅)₃B at elevated temperature to give the products 5a and 5b , respectively. At room temperature, we observed the formation of the corresponding phosphireniumborate zwitterions, 7a and 7b , respectively, which may be intermediates of the 1,1‐carboboration reactions. The reaction of the more bulky 1,2‐bis[(dimesitylphosphino)ethynyl]benzene 1c with (C₆F₅)₃B takes a different course. At 110°, we observed the complete conversion to the benzopentafulvene derivative 8 which is probably formed in a typical carbocation rearrangement sequence after the initial (C₆F₅)₃B Lewis acid‐addition step. The compounds 5a, 5b, 7b , and 8 were characterized by X‐ray crystal‐structure analyses.     

Charge-Assisted Halogen Bonding in an Ionic Cavity of a Coordination Cage Based on a Copper(I) Iodide Cluster

The design of molecular containers capable of selectively binding specific guest molecules presents an interesting synthetic challenge in supramolecular chemistry. Here, we report the synthesis and structure of a coordination cage assembled from Cu₃I₄⁻ clusters and tripodal cationic N-donor ligands. Owing to the localized permanent charges in the ligand core the cage binds iodide anions in specific regions within the cage through ionic interactions. This allows the selective binding of bromomethanes as secondary guest species within the cage promoted by halogen bonding, which was confirmed by single-crystal X-ray diffraction.     

Dioxygen Reactivity with a Ferrocene–Lewis Acid Pairing: Reduction to a Boron Peroxide in the Presence of Tris(pentafluorophenyl)borane

Ferrocenes, which are typically air‐stable outer‐sphere single‐electron transfer reagents, were found to react with dioxygen in the presence of B(C₆F₅)₃, a Lewis acid unreactive to O₂, to generate bis(borane) peroxide. Although several Group 13 peroxides have been reported, boron‐supported peroxides are rare, with no structurally characterized examples of the BO₂B moiety. The synthesis of a bis(borane)‐supported peroxide anion and its structural and electrochemical characterization are described.     

以聚硫堇为电化学探针的非标记型核酸适配体传感器

采用电聚合法制备了聚硫堇氧化还原电化学探针, 以金纳米粒子为固定核酸适配体的载体构建了非标记型核酸适配体传感器. 用电化学阻抗谱对传感器的组装过程进行了监测, 用循环伏安法和差分脉冲伏安法考察了传感器的电化学行为. 结果表明, 该传感器对凝血酶的检测在1.0 pg/mL～500 ng/mL范围内呈良好的线性关系, 相关系数为0.998, 检出限为0.38 pg/mL. 该传感器制备简单、 灵敏度高且抗干扰能力强.     

Nickel(II) and palladium(II) complexes with α‐dioxime ligands as catalysts for the vinyl polymerization of norbornene in combination with methylaluminoxane,tris(pentafluorophenyl)borane,or triethylaluminum cocatalyst systems

Nickel(II) and palladium(II) complexes with α‐dioxime ligands dimethylglyoxime, diphenylglyoxime, and 1,2‐cyclohexanedionedioxime represent six new precatalysts for the polymerization of norbornene that can be activated with methylaluminoxane (MAO), the organo‐Lewis acid tris(pentafluorophenyl)borane [B(C₆F₅)₃], and triethylaluminum (TEA) AlEt₃. The palladium but not the nickel precatalysts could also be activated by B(C₆F₅)₃ alone, whereas two of the three nickel precatalysts but none of the palladium systems are somewhat active with only TEA as a cocatalyst. It was possible to achieve very high polymerization activities up to 3.2 · 10⁷ g_polymer/mol_metal · h. With the system B(C₆F₅)₃/AlEt₃, the activation process can be formulated as the following two‐step reaction: (1) B(C₆F₅)₃ and TEA lead to an aryl/alkyl group exchange and result in the formation of Al(C₆F₅)_nEt_3?n and B(C₆F₅)_3?nEt_n; and (2) Al(C₆F₅)_nEt_3?n will then react with the precatalysts to form the active species for the polymerization of norbornene. Variation of the B:Al ratio shows that Al(C₆F₅)Et₂ is sufficient for high activation. Gel permeation chromatography indicated that it was possible to control the molar mass of poly(norbornene)s by TEA or 1‐dodecene as chain‐transfer agents; the molar mass can be varied in the number‐average molecular weight range from 2 · 10³ to 9 · 10⁵ g · mol^?1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3604–3614, 2002     

Translation of helical chirality from polymer into monomer: supramolecular polymerization of a chirality-memory molecule with an asymmetric Pd(II) complex

A chirality-memorizing saddle-shaped porphyrin (1_2H) with 3,5-dipyridylphenyl side arms at the opposite meso positions underwent supramolecular polymerization in CH₂Cl₂ with a chiral Pd(II) complex of 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (Pd^II(BINAP)), forming a ladder-shaped polymer (3_2H) with a prevailing one-handed helical chirality. When this polymer was poured into AcOH containing 1,3-bis(diphenylphosphino)propane (DPPP) as a decomplexing agent, 3_2H was depolymerized in a stereochemically retentive way to give optically active 1_2H, hydrogen-bonded with AcOH. Although a cyclodimeric reference of 3_2H, formed from 2_2H having two 3-pyridylphenyl meso substituents in conjunction with Pd^II(BINAP), behaved similar to 3_2H, the translation efficiency of helical chirality was lower than that in the case with 3_2H.     

Tris(2-ethylhexyl)phosphate as an extractant for quadrivalent tin,with subsequent determination with pyrocatechol violet in alloy samples

The solvent extraction of tin(IV) from chloride media withtris(2-ethylhexyl)phosphate is presented. Tin(IV) is extracted quantitatively from 2.75–3.20 mol dm^–3 hydrochloric acid using 6.38–6.91 mol dm^–3 tris(2-ethyl-hexyl)phosphate dissolved in toluene as an extractant. After back-extraction of tin(IV) with water from thetris(2-ethylhexyl)phosphate phase, it is estimated spectrophotometrically following complexation with pyrocatechol violet. The recommended range for determination of tin(IV) is 10–100 g. The probable extracted species is SnCl₄·2TEHP. The method is applicable to the analysis of alloy samples with a detection limit of 0.4 g/ml (for 10 g of tin) and a relative standard deviation between 0.21–0.32%.     

Sol-Gel Derived Carbon Ceramic Electrode Bulk-Modified with Tris(1,10-phenanthroline-5,6-dione)iron(II) Hexafluorophos-phate and Its Use as an Amperometric Iodate Sensor

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｓｏｌ ｇｅｌｐｒｏｃｅｓｓｐｒｏｖｉｄｅｓａｖｅｒｓａｔｉｌｅｍｅｔｈｏｄｆｏｒｔｈｅｆａｂｒｉｃａｔｉｏｎｏｆｉｎｏｒｇａｎｉｃａｎｄｉｎｏｒｇａｎｉｃ ｏｒｇａｎｉｃｈｙｂｒｉｄｍａｔｅｒｉａｌｓｖｉａｔｈｅｈｙｄｒｏｌｙｓｉｓａｎｄｃｏｎｄｅｎｓａｔｉｏｎｏｆｓｕｉｔａｂｌｅｍｅｔａｌａｌｋｏｘｉｄｅｓ .1 3Ｔｈｅｓｅｍａｔｅｒｉａｌｓｐｏｓｓｅｓｓｎｏｔａｂｌｅａｄ ｖａｎｔａｇｅｓｏｖｅｒｏｔｈｅｒｉｎｏｒｇａｎｉｃ ｏｒｇａｎｉｃｍａｔｅｒｉａｌｓｆｏｒｔ…     

Microwave-assisted efficient one-step synthesis of amides from ketones and benzoxazoles from (2-hydroxyaryl) ketones with acetohydroxamic acid using sulfuric acid as the catalyst

Efficient one-step method for the synthesis of amides directly from ketones and benzoxazoles from (2-hydroxyaryl) ketones by the reaction of acetohydroxamic acid using sulfuric acid as catalyst was described.     

Chiral terpene auxiliaries. Part 1: Highly enantioselective reduction of ketones with borane catalyzed by an oxazaborolidine derived from (−)-β-pinene

(1R,2S,3R,5R)-3-Amino-6,6-dimethyl-2-hydroxybicyclo[3.1.1]heptane was synthesized in three steps from (−)-β-pinene. It was used for the in situ generation of a B-methoxy-oxazaborolidine catalyst for the asymmetric reduction of alkyl-aryl ketones with borane-dimethyl sulfide complex. In the presence of 3 mol % of the catalyst, the product alcohols were obtained in high yields and with enantiomeric excesses in the range of 93-98%.