Fluorescence and Sensing Applications of Graphene Oxide and Graphene Quantum Dots: A Review

Graphene oxide and graphene quantum dots are attractive fluorophores that are inexpensive, nontoxic, photostable, water‐soluble, biocompatible, and environmentally friendly. They find extensive applications in fluorescent biosensors and chemosensors, in which they serve as either fluorophores or quenchers. As fluorophores, they display tunable photoluminescence emission and the “giant red‐edge effect”. As quenchers, they exhibit a remarkable quenching efficiency through either electron transfer or Förster resonance energy transfer (FRET) process. In this review, the origin of fluorescence and the mechanism of excitation wavelength‐dependent fluorescence of graphene oxide and graphene quantum dots are discussed. Sensor design strategies based on graphene oxide and graphene quantum dots are presented. The applications of these sensors in health care, the environment, agriculture, and food safety are highlighted.     

Amphiphilic Fluorescence Resonance Energy-Transfer Dyes: Synthesis,Fluorescence, and Aggregation Behavior in Water

Amphiphilic pyrene/perylene bis-chromophore dyes were synthesized from unsymmetrically substituted perylene bisimide dyes, which were obtained through three synthetic methods. The optical and aggregation behaviors of these functional dyes were studied by means of UV/Vis absorption and fluorescence spectroscopy, dynamic light scattering, and TEM. These dyes are highly fluorescent and cover the whole visible-light region. A donor/acceptor dye displays intramolecular fluorescence resonance energy transfer (FRET), with a high efficiency of up to 96.4 % from pyrene to perylene bisimide chromophores, which leads to a high fluorescence color sensitivity to environmental polarity. Under a λ=365 nm UV lamp, the light-emitting colors of the donor/acceptor dye change from green to yellow with increasing solvent polarity, which demonstrates application potential as a new class of FERT probes. The donor/acceptor dye in water was assembled into hollow vesicles with a narrow size distribution. The bilayer structure of the vesicular wall was directly observed by means of TEM. These vesicular aggregates in water are fluorescent at λ=650–850 nm within the near-infrared region.     

A Chiral Lanthanide Tag for Stable and Rigid Attachment to Single Cysteine Residues in Proteins for NMR,EPR and Time-Resolved Luminescence Studies

A lanthanide-binding tag site-specifically attached to a protein presents a tool to probe the protein by multiple spectroscopic techniques, including nuclear magnetic resonance, electron paramagnetic resonance and time-resolved luminescence spectroscopy. Here a new stable chiral Ln^III tag, referred to as C12 , is presented for spontaneous and quantitative reaction with a cysteine residue to generate a stable thioether bond. The synthetic protocol of the tag is relatively straightforward, and the tag is stable for storage and shipping. It displays greatly enhanced reactivity towards selenocysteine, opening a route towards selective tagging of selenocysteine in proteins containing cysteine residues. Loaded with Tb^III or Tm^III ions, the C12 tag readily generates pseudocontact shifts (PCS) in protein NMR spectra. It produces a relatively rigid tether between lanthanide and protein, which is beneficial for interpretation of the PCSs by single magnetic susceptibility anisotropy tensors, and it is suitable for measuring distance distributions in double electron–electron resonance experiments. Upon reaction with cysteine or other thiol compounds, the Tb^III complex exhibits a 100-fold enhancement in luminescence quantum yield, affording a highly sensitive turn-on luminescence probe for time-resolved FRET assays and enzyme reaction monitoring.     

Fabrication of a Fe2O3 Nanoparticles Implantation‐modified Electrode and its Applications in Electrochemical Sensing

A novel Fe₂O₃ modified indium tin oxide electrode (Fe₂O₃/ITO) was fabricated by iron ion‐implantation method first, and then annealed at 300 °C. Fe₂O₃/ITO reveals good catalytic performance toward hydrogen peroxide (H₂O₂) in phosphate buffer solution due to the Fe(II)/Fe(III) redox couple. Amperometric response shows a linear dependency on the H₂O₂ concentration ranging up to 360 μM with a detection limit of 0.3 μM. Moreover, electrocatalytic activity based on rarely reported higher oxidation states of iron (tentatively assigned to Fe(IV)) was shown to allow the reliable detection of glucose and cysteine. The results show promising application potential of the proposed electrode.     

Biomembrane Interactions of Functionalized Cryptophane‐A: Combined Fluorescence and 129Xe NMR Studies of a Bimodal Contrast Agent

Fluorescent derivatives of the ¹²⁹Xe NMR contrast agent cryptophane‐A were obtained by functionalization with near infrared fluorescent dyes DY680 and DY682. The resulting conjugates were spectrally characterized, and their interaction with giant and large unilamellar vesicles of varying phospholipid composition was analyzed by fluorescence and NMR spectroscopy. In the latter, a chemical exchange saturation transfer with hyperpolarized ¹²⁹Xe (Hyper‐CEST) was used to obtain sufficient sensitivity. To determine the partitioning coefficients, we developed a method based on fluorescence resonance energy transfer from Nile Red to the membrane‐bound conjugates. This indicated that not only the hydrophobicity of the conjugates, but also the phospholipid composition, largely determines the membrane incorporation. Thereby, partitioning into the liquid‐crystalline phase of 1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphocholine was most efficient. Fluorescence depth quenching and flip‐flop assays suggest a perpendicular orientation of the conjugates to the membrane surface with negligible transversal diffusion, and that the fluorescent dyes reside in the interfacial area. The results serve as a basis to differentiate biomembranes by analyzing the Hyper‐CEST signatures that are related to membrane fluidity, and pave the way for dissecting different contributions to the Hyper‐CEST signal.     

Ambient Temperature Photocopolymerization of Tetrahydrofurfuryl Methacrylate and Isobornyl Methacrylate: Reactivity Ratios and Thermal Studies

Photocopolymerization of heterocyclic monomer namely, tetrahydrofurfuryl methacrylate with bulky bicyclic monomer, isobornyl methacrylate with different feed ratios was carried out in bulk with low concentration of an α-hydroxyl ketone based photoinitiator. The ambient temperature photocopolymerization was carried out by using a UV-Visible lamp with fixed low intensity of 0.4 mW cm^?2 for a period of 6 min. The residual monomer remained in the polymerization process were determined by using gas chromatography. The reactivity ratio values for the two monomers were calculated from the copolymer composition data by using Fineman-Ross, Kelen-Tudos, Extended Kelen-Tudos and Mao-Huglin methods. Individually, as well as the average of all the methods revealed that the monomer reactivity ratios of tetrahydrofurfuryl methacrylate were higher than isobornyl methacrylate. The dyad sequence distribution and dyad sequence lengths were calculated using the Igarashi and Pyun method and the sequence length distribution for tetrahydrofurfuryl methacrylate was observed to be higher with an increase in its feed content. This supports the reactivity ratio studies that a higher monomer reactivity ratio value for tetrahydrofurfuryl methacrylate was observed as compared to its comonomer. The thermal studies showed that the glass transition temperatures of the copolymers increased with an increase in isobornyl methacrylate content.     

Pyrenyl Excimers Induced by the Crystallization of POSS Moieties: Spectroscopic Studies and Sensing Applications

An ester (PBPOSS) of 1‐pyrenebutyric acid (PBA) and 1‐(2,3‐propanediol)propoxy‐3,5,7,9,11,13,15‐isobutylpentacyclo‐[9.5.1.1(3,9).1(5,15).1(7,13)]octasiloxane (a polyhedral oligomeric silsesquioxane, POSS) is synthesized by simple one‐step esterification. Thin films of PBPOSS fabricated by the spin‐coating technique exhibit strong excimer emissions of visible light. Upon exposure to the vapours of nitroaromatic compounds, including trinitro‐ toluene and dinitrotoluene, the films show fast fluorescence quenching. The high performance of these gas sensors is due to the high excimer contents and good vapour permeability of the PBPOSS films. Spectroscopic studies indicate that the crystallization of the POSS moieties in PBPOSS films induce the formation of pyrenyl excimers.     

Nanomaterials in Electrochemical Sensing Area: Applications and Challenges in Food Analysis

Recently, nanomaterials have received increasing attention due to their unique physical and chemical properties, which make them of considerable interest for applications in many fields, such as biotechnology, optics, electronics, and catalysis. The development of nanomaterials has proven fundamental for the development of smart electrochemical sensors to be used in different application fields such, as biomedical, environmental, and food analysis. In fact, they showed high performances in terms of sensitivity and selectivity. In this report, we present a survey of the application of different nanomaterials and nanocomposites with tailored morphological properties as sensing platforms for food analysis. Particular attention has been devoted to the sensors developed with nanomaterials such as carbon-based nanomaterials, metallic nanomaterials, and related nanocomposites. Finally, several examples of sensors for the detection of some analytes present in food and beverages, such as some hydroxycinnamic acids (caffeic acid, chlorogenic acid, and rosmarinic acid), caffeine (CAF), ascorbic acid (AA), and nitrite are reported and evidenced.     

Fluorescence resonance energy transfer (FRET) in chemistry and biology: Non-F?rster distance dependence of the FRET rate

Fluorescence resonance energy transfer (FRET) is a popular tool to study equilibrium and dynamical properties of polymers and biopolymers in condensed phases and is now widely used in conjunction with single molecule spectroscopy. In the data analysis, one usually employs the F?rster expression which predicts (l/R ⁶) distance dependence of the energy transfer rate. However, critical analysis shows that this e_xpression can be of rather limited validity in many cases. We demonstrate this by explicitly considering a donor-acceptor system, polyfluorene (PF₆)-tetraphenylporphyrin (TPP), where the size of both donor and acceptor is comparable to the distance separating them. In such cases, one may expect much weaker distance (as l/R ² or even weaker) dependence. We have also considered the case of energy transfer from a dye to a nanoparticle. Here we find l/R ⁴ distance dependence at large separations, completely different from F?rster. We also discuss recent application of FRET to study polymer conformational dynamics. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Recognition of Free Tryptophan in Water by Synthetic Pseudopeptides: Fluorescence and Thermodynamic Studies

Pseudopeptidic receptors containing an acridine unit have been prepared and their fluorescence response to a series of amino acids was measured in water. Free amino acids, not protected either at the C or the N terminus, were used for this purpose. The prepared receptors display a selective response to tryptophan (Trp) versus the other assayed amino acids under acidic conditions. The macrocyclic nature of the receptor is important as the fluorescence quenching is higher for the macrocyclic compound than for the related open‐chain receptor. Notably, under the experimental acidic conditions used, both the receptor and guest are fully protonated and positively charged; thus, the experimental results suggest the formation of supramolecular species that contain two positively charged organic molecular components in proximity stabilized through aromatic–aromatic interactions and a complex set of cation‐anion‐cation interactions. The selectivity towards Trp seems to be based on the existence of a strong association between the indole ring of the monocharged amino acid and the acridinium fragment of the triprotonated form of the receptor, which is established to be assisted by the interaction of the cationic moieties with hydrogen sulfate anions.     

Weak Attractive Ligand–Polymer and Related Interactions in Catalysis and Reactivity: Impact,Applications, and Modeling

The notion of weak attractive ligand–polymer interactions is introduced, and its potential application, importance, and conceptual links with “cooperative” ligand–substrate interactions are discussed. Synthetic models of weak attractive ligand–polymer interactions are described, in which intramolecular weak C? H???F? C interactions (the existence of which remains contentious) have been detected by NMR spectroscopy and neutron and X‐ray diffraction experiments. These C? H???F? C interactions carry important implications for the design of catalysts for olefin polymerization, because they provide support for the practical feasibility of ortho‐F???H_β ligand–polymer contacts proposed for living Group 4 fluorinated phenoxyimine catalysts. The notion of weak attractive noncovalent interactions between an “active” ligand and the growing polymer chain is a novel concept in polyolefin catalysis.     

Peptide-Based Optical/Electronic Materials: Assembly and Recent Applications in Biomedicine,Sensing, and Energy Storage

The unique optical and electronic properties of living systems are impressive. Peptide-based supramolecular self-assembly systems attempt to mimic these properties by preparation optical/electronic function materials with specific structure through simple building blocks, rational molecular design, and specific kinetic stimulation. From the perspective of building blocks and assembly strategies, the unique optical and electronic properties of peptide-based nanostructures, including peptides self-assembly and peptides regulate the assembly of external function subunits, are systematically reviewed. Additionally, their applications in biomedicine, sensing, and energy storage are also highlighted. This bioinspired peptide-based function material is one of the hot candidates for the new generation of green intellect materials, with many advantages such as biocompatibility, environmental friendliness, and adjustable morphology.     

X‐ray Excited Optical Fluorescence and Diffraction Imaging of Reactivity and Crystallinity in a Zeolite Crystal: Crystallography and Molecular Spectroscopy in One

Structure–activity relationships in heterogeneous catalysis are challenging to be measured on a single‐particle level. For the first time, one X‐ray beam is used to determine the crystallographic structure and reactivity of a single zeolite crystal. The method generates μm‐resolved X‐ray diffraction (μ‐XRD) and X‐ray excited optical fluorescence (μ‐XEOF) maps of the crystallinity and Brønsted reactivity of a zeolite crystal previously reacted with a styrene probe molecule. The local gradients in chemical reactivity (derived from μ‐XEOF) were correlated with local crystallinity and framework Al content, determined by μ‐XRD. Two distinctly different types of fluorescent species formed selectively, depending on the local zeolite crystallinity. The results illustrate the potential of this approach to resolve the crystallographic structure of a porous material and its reactivity in one experiment via X‐ray induced fluorescence of organic molecules formed at the reactive centers.     

Specialized Pro-Resolving Mediators in Neuroinflammation: Overview of Studies and Perspectives of Clinical Applications

Specialized pro-resolving mediators (SPMs) are lipid mediators derived from poly-unsaturated fatty acids (PUFAs) which have been demonstrated to have an important role in the inflammation environment, preventing an overreaction of the organism and promoting the resolution of inflammation. Our purpose was to point out the current evidence for specialized pro-resolving mediators, focusing on their role in neuroinflammation and in major neurological diseases.     

Electrophilic S‐Trifluoromethylation of Cysteine Side Chains in α‐ and β‐Peptides: Isolation of Trifluoro‐methylated Sandostatin® (Octreotide) Derivatives

The new electrophilic trifluoromethylating 1‐(trifluoromethyl)‐benziodoxole reagents A and B (Scheme 1) have been used to selectively attach CF₃ groups to the S‐atom of cysteine side chains of α‐ and β‐peptides (up to 13‐residues‐long; products 7 – 14 ). Other functional groups in the substrates (amino, amido, carbamate, carboxylate, hydroxy, phenyl) are not attacked by these soft reagents. Depending on the conditions, the indole ring of a Trp residue may also be trifluoromethylated (in the 2‐position). The products are purified by chromatography, and identified by ¹H‐, ¹³C‐, and ¹⁹F‐NMR spectroscopy, by CD spectroscopy, and by high‐resolution mass spectrometry. The CF₃ groups, thus introduced, may be replaced by H (Na/NH₃), an overall Cys/Ala conversion. The importance of trifluoromethylations in medicinal chemistry and possible applications of the method (spin‐labelling, imaging, PET) are discussed.     

Temperature effects in capillary electrophoresis 2: Some theoretical calculations and predictions

Summary The dependence of the temperature excess, , in the capillary bore on the applied power, EI, is considered for both natural and forced convective cooling, using classical heat equations. The dependence of on EI is found to be linear for forced convection but not for natural convection. Use of forced convective cooling and capillaries of large outer diameter reduces . Direct comparison of the performance of different systems can be achieved by consideration of . Column performance is ultimately limited by thermal gradients across the capillary bore.     

Segmented Polyurethanes for Medical Applications: Synthesis,Characterization and in vitro Enzymatic Degradation Studies

Degradable segmented poly(ether-ester-urethanes) of variable segment chemistry and content were synthesized and characterized. Polycaprolactone diol, a series of poly(ether-ester) block copolymers, and a diisocyanate giving non toxic degradation products were used to form the prepolymer. Cyclohexane dimethanol and a L–phenylalanine–based diester (Phe diester) were used as chain extenders. The influence of α-chimotrypsin on the degradation was investigated by exposing the polymers to buffer and enzyme solutions for 12 days. The SEM, SEC, and gravimetric results showed that a significant erosion of the Phe diester containing polymer compared with the control polyurethane occurred in the presence of the enzyme but not in a normal buffer solution.     

Temperature effects in capillary electrophoresis. 1: Internal capillary temperature and effect upon performance

Summary In isothermal CE the migration velocity of analytes and the number of theoretical plates delivered are expected to be proportional to the field strength. In reality ohmic heating of the capillary causes distortions: the migration velocity increases more rapidly while the plate count increases less rapidly, and may even fall at high values of the field. These distortions are worse the larger the bore of the capillary and the higher the concentration of buffer. A detailed investigation of these effects using capillaries cooled by natural convection has confirmed that self heating of the capillary is indeed largely responsible. The extent of self heating has been determined by three independent methods and to a first approximation is proportional to the power dissipation in the capillary. Decreasing viscosity with temperature is responsible for the nonlinearity of the dependence of velocity upon field strength while increase in the diffusion coefficient of analytes is responsible for the poorer than expected performance at high field strengths.     

Fluorescence Studies of Solubilization and Dye Binding in Hypercoiled Poly(methacrylic Acid): A Connected Cluster Model

The compact conformation of poly(methacrylic acid) which is observed in the unneutralized polymer has been studied using the fluorescence probes 9-methyl anthracene and Rhodamine B. Steady-state and time-resolved fluorescence anisotropy measurements have been made. The results show that this conformation contains a number of binding sites which have molecular weights in the range 9,000–10,000 and which can rotate independently of the remainder of the chain.     

Advances in Template Prepared Nano‐Oxides and their Applications: Polluted Water Treatment,Energy, Sensing and Biomedical Drug Delivery

The nano‐oxide materials with special structures prepared by template methods have a good dispersion, regular structures and high specific surface areas. Therefore, in some areas, improved properties are observed than conventional bulk oxide materials. For example, in the treatment of dye wastewater, the treatment efficiency of adsorbents and catalytic materials prepared by template method was about 30 % or even higher than that of conventional samples. This review mainly focuses on the progress of inorganic, organic and biological templates in the preparation of micro‐ and nano‐ oxide materials with special morphologies, and the roles of the prepared materials as adsorbents and photocatalysts in dye wastewater treatment. The characteristics and advantages of inorganic, organic and biological template are also summarized. In addition, the applications of template method prepared oxides in the field of sensors, drug carrier, energy materials and other fields are briefly discussed with detailed examples.