The Tannins from Sanguisorba officinalis L. (Rosaceae): A Systematic Study on the Metabolites of Rats Based on HPLC–LTQ–Orbitrap MS2 Analysis

Sanguisorba tannins are the major active ingredients in Sanguisorba ofJicinalis L. (Rosaceae), one of the most popular herbal medicines in China, is widely prescribed for hemostasis. In this study, three kinds of tannins extract from Sanguisorba officinalis L. (Rosaceae), and the metabolites in vivo and in vitro were detected and identified by high-pressure liquid chromatography, coupled with linear ion trap orbitrap tandem mass spectrometry (HPLC–LTQ–Orbitrap). For in vivo assessment, the rats were administered at a single dose of 150 mg/kg, after which 12 metabolites were found in urine, 6 metabolites were found in feces, and 8 metabolites were found in bile, while metabolites were barely found in plasma and tissues. For in vitro assessment, 100 μM Sanguisorba tannins were incubated with rat liver microsomes, liver cytosol, and feces, after which nine metabolites were found in intestinal microbiota and five metabolites were found in liver microsomes and liver cytosol. Moreover, the metabolic pathways of Sanguisorba tannins were proposed, which shed light on their mechanism.     

Customizing Pore System in a Microporous Metal–Organic Framework for Efficient C2H2 Separation from CO2 and C2H4

Selective-adsorption separation is an energy-efficient technology for the capture of acetylene (C₂H₂) from carbon dioxide (CO₂) and ethylene (C₂H₄). However, it remains a critical challenge to effectively recognize C₂H₂ among CO₂ and C₂H₄, owing to their analogous molecule sizes and physical properties. Herein, we report a new microporous metal–organic framework (NUM-14) possessing a carefully tailored pore system containing moderate pore size and nitro-functionalized channel surface for efficient separation of C₂H₂ from CO₂ and C₂H₄. The activated NUM-14 (namely NUM-14a) exhibits sufficient pore space to acquire excellent C₂H₂ loading capacity (4.44 mmol g⁻¹) under ambient conditions. In addition, it possesses dense nitro groups, acting as hydrogen bond acceptors, to selectively identify C₂H₂ molecules rather than CO₂ and C₂H₄. The breakthrough experiments demonstrate the good actual separation ability of NUM-14a for C₂H₂/CO₂ and C₂H₂/C₂H₄ mixtures. Furthermore, Grand Canonical Monte Carlo simulations indicate that the pore surface of the NUM-14a has a stronger affinity to preferentially bind C₂H₂ over CO₂ and C₂H₄ via stronger C-H···O hydrogen bond interactions. This article provides some insights into customizing pore systems with desirable pore sizes and modifying groups in terms of MOF materials toward the capture of C₂H₂ from CO₂ and C₂H₄ to promote the development of more MOF materials with excellent properties for gas adsorption and separation.     

Exploring the Dual Characteristics of CH3OH Adsorption to Metal Atomic Structures on Si (111)-7 × 7 Surface

Metal atoms were deposited on an Si (111)-7 × 7 surface, and they were adsorbed with alcohol gases (CH₃OH/C₂H₅OH/C₃H₇OH). Initially, C_nH_2n+1OH adsorption was simply used as an intermediate layer to prevent the chemical reaction between metal and Si atoms. Through scanning tunneling microscopy (STM) and a mass spectrometer, the C_nH_2n+1OH dissociation process is further derived as the construction of a surface quasi-potential with horizontal and vertical directions. With the help of three typical metal depositions, the surface characteristics of CH₃OH adsorption are more clearly presented in this paper. Adjusting the preheating temperature, the difference of thermal stability between CH₃O^– and H⁺ could be obviously derived in Au deposition. After a large amount of H⁺ was separated, the isolation characteristic of CH₃O^– was discussed in the case of Fe deposition. In the process of building a new metal-CH₃O^–-H⁺ model, the dual characteristics of CH₃OH were synthetically verified in Sn deposition. CH₃O^– adsorption is prone to influencing the interaction between the metal deposition and substrate surface in the vertical direction, while H⁺ adsorption determines the horizontal behavior of metal atoms. These investigations lead one to believe that, to a certain extent, the formation of regular metal atomic structures on the Si (111)-7 × 7-CH₃OH surface is promoted, especially according to the dual characteristics and adsorption models we explored.     

The Effects of Side-Chain Configurations of a Retro–Inverso-Type Inhibitor on the Human T-Cell Leukemia Virus (HTLV)-1 Protease

In this study, the effects of side-chain configurations of D-Ile residues of a retro–inverso (RI)-type inhibitor on the human T-cell leukemia virus type 1 (HTLV-1) protease containing a hydroxyethylamine dipeptide isostere were clarified. Prior to evaluation using the RI-type inhibitor, the effects of side-chain configurations of Ile residues of the substrate peptide on the HTLV-1 protease were examined to estimate the influence of side-chain configurations on enzyme activity. Based on the estimation of the influence of side-chain configurations on protease affinity, the RI-type inhibitors containing a D-allo-Ile residue in the corresponding substrate sequence, instead of a D-Ile residue, were synthesized via 9-fluorenylmethoxycarbonyl-based solid-phase peptide synthesis. Refolded recombinant HTLV-1 protease (1-116, L40I) was used for the simple and short evaluation of the inhibitory activities of the synthesized RI-type inhibitors. The results clearly indicated that mimicking the whole topology, comprising both the main- and side-chain structures of the parent inhibitor, is effective for the design of potent RI-modified protease inhibitors.     

The Inhibitory Effects of Plant Derivate Polyphenols on the Main Protease of SARS Coronavirus 2 and Their Structure–Activity Relationship

The main protease (M^pro) is a major protease having an important role in viral replication of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the novel coronavirus that caused the pandemic of 2020. Here, active M^pro was obtained as a 34.5 kDa protein by overexpression in E. coli BL21 (DE3). The optimal pH and temperature of M^pro were 7.5 and 37 °C, respectively. M^pro displayed a K_m value of 16 μM with Dabcyl-KTSAVLQ↓SGFRKME-Edans. Black garlic extract and 49 polyphenols were studied for their inhibitory effects on purified M^pro. The IC₅₀ values were 137 μg/mL for black garlic extract and 9–197 μM for 15 polyphenols. The mixtures of tannic acid with puerarin, daidzein, and/or myricetin enhanced the inhibitory effects on M^pro. The structure–activity relationship of these polyphenols revealed that the hydroxyl group in C3′, C4′, C5′ in the B-ring, C3 in the C-ring, C7 in A-ring, the double bond between C2 and C3 in the C-ring, and glycosylation at C8 in the A-ring contributed to inhibitory effects of flavonoids on M^pro.     

Tandem Transesterification–Esterification Reactions Using a Hydrophilic Sulfonated Silica Catalyst for the Synthesis of Wintergreen Oil from Acetylsalicylic Acid Promoted by Microwave Irradiation

SiO₂–SO₃H, with a surface area of 115 m²/g and pore volume of 0.38 cm³g⁻¹, and 1.32 mmol H⁺/g was used as a 20% w/w catalyst for the preparation of methyl salicylate (wintergreen oil or MS) from acetylsalicylic acid (ASA). A 94% conversion was achieved in a microwave reactor over 40 min at 120 °C in MeOH. The resulting crude product was purified by flash chromatography. The catalyst could be reused three times.     

Effect of Sex Steroids and PGF2α on the Expression of Their Receptors and Decorin in Bovine Caruncular Epithelial Cells in Early–Mid Pregnancy

Changes in the expression of various genes, including pregnancy-associated hormone receptors and extracellular matrix proteins, have been suggested to play a significant role in bovine placental development. This study aimed to examine the influence of sex steroids and PGF_2α on decorin (DCN) expression in the epithelial cells of bovine caruncle in early–mid pregnancy in cows. The expression patterns of DCN, PTGFR_, PGR and ESR1 were analyzed by RT-qPCR and Western blotting in primary caruncular epithelial cell cultures (PCECC) and placental tissue homogenates derived from the 2nd and 4th months of pregnancy. PCECC were found to express DCN, PTGFR_, PGR and ESR1. The intensity of PGR staining was higher in cells derived from the 4th month of pregnancy (p < 0.05). The 17β-estradiol, progesterone and PGF_2α have not been shown to affect DCN expression. PGF_2α decreased PTGFR expression in cells derived from the 4th month of gestation (p < 0.05). In conclusion, the results of the present preliminary study showed that the expression of the PTGFR, ESR1, PGR and DCN in PCECC does not vary throughout early–mid pregnancy. Further studies should be carried out to observe the relationship between hormonal status and cellular adhesion to determine their importance for properly developing placentation and pregnancy in cows.     

The Expression Profiles of the Salvia miltiorrhiza 3-Hydroxy-3-methylglutaryl-coenzyme A Reductase 4 Gene and Its Influence on the Biosynthesis of Tanshinones

Salvia miltiorrhiza is a medicinal plant that synthesises biologically-active tanshinones with numerous therapeutic properties. An important rate-limiting enzyme in the biosynthesis of their precursors is 3-hydroxy-3-methylglutaryl-coenzyme A reductase (HMGR). This study presents the organ-specific expression profile of the S. miltiorrhiza HMGR4 gene and its sensitivity to potential regulators, viz. gibberellic acid (GA₃), indole-3-acetic acid (IAA) and salicylic acid (SA). In addition, it demonstrates the importance of the HMGR4 gene, the hormone used, the plant organ, and the culture environment for the biosynthesis of tanshinones. HMGR4 overexpression was found to significantly boost the accumulation of dihydrotanshinone I (DHTI), cryptotanshinone (CT), tanshinone I (TI) and tanshinone IIA (TIIA) in roots by 0.44 to 5.39 mg/g dry weight (DW), as well as TIIA in stems and leaves. S. miltiorrhiza roots cultivated in soil demonstrated higher concentrations of the examined metabolites than those grown in vitro. GA₃ caused a considerable increase in the quantity of CT (by 794.2 µg/g DW) and TIIA (by 88.1 µg/g DW) in roots. In turn, IAA significantly inhibited the biosynthesis of the studied tanshinones in root material.     

Co(III) complexes of Me-salpn and Me-salbn and the ring size effect on the coordination modes and electrochemical properties: The crystal structures of trans-[Co(Me-salpn)(py)2]PF6 and cis-α-[Co(Me-salbn)(4-Mepy)2]BPh4 · 4-Mepy

The synthesis and characterization of a series of cobalt(III) complexes of the general type [Co(N₂O₂)(L₂)]⁺ are described. The N₂O₂ Schiff base ligands used are Me-salpn (H₂Me-salpn = N,N′-bis(methylsalicylidene)-1,3-propylenediamine) (1–3) and Me-salbn (H₂Me-salbn = N,N′-bis(methylsalicylidene)-1,4-butylenediamine) (4–5). The two ancillary ligands L include: pyridine (py) 1, 3-metheylpyridine (3-Mepy) 2, 1-methylimidazole (1-MeIm) 3, 4-methylpyridine (4-Mepy) 4 and pyridine (py) 5. These complexes have been characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structures of trans-[Co^III(Me-salpn)(py)₂]PF₆, 1, and cis-α-[Co^III(Me-salbn)(4-Mepy)₂]BPh₄ · 4-Mepy, 4, have been determined by X-ray diffraction. Examination of the solution and crystalline structures revealed that the outer coordination sphere of the complexes exerts a noticeable influence on the inner coordination sphere of the Co(III) ion. The electrochemical reduction of these complexes at a glassy carbon electrode in acetonitrile solution indicates that the first reduction process corresponding to Co^III–Co^II is electrochemically irreversible, which is accompanied by the dissociation of the axial (R-py)–cobalt bonds. It has also been observed that the Co(III) state is stabilized with increasing the flexibility of the ligand environment.     

The Influence of the Ligands Cp*(η5‐C5Me5) and Cp(η5‐C5H5) on the Stability and Reactivity of Titanocene and Zirconocene Complexes: Reactions of the Bis(trimethylsilyl)acetylene Permethylmetallocene Complexes (η5‐C5Me5)2M(η2‐Me3SiC2SiMe3), M = Ti,Zr, with H2O and CO2

The reactions of the bis(trimethylsilyl)acetylene permethylmetallocene complexes CpM(η²‐Me₃SiC₂SiMe₃) (M = Ti ( 1 ), M = Zr ( 2 )) with H₂O and CO₂ were studied and compared to those of the corresponding metallocene complexes Cp₂M(L)(η²‐Me₃SiC₂SiMe₃) (M = Ti ( 3 ), L = – ; M = Zr, L = THF ( 4 )) to understand the influence of the ligands Cp(η⁵‐C₅H₅) and Cp*(η⁵‐C₅Me₅) as well as the metals titanium and zirconium on the reaction pathways and the obtained products. In the reaction of the permethyltitanocene complex 1 with water the dihydroxy complex CpTi(OH)₂ ( 5 ) was formed. This product differs from the well‐known titanoxane Cp₂TiOTiCp₂ which was obtained by the reaction of the corresponding titanocene complex 3 with water. The reaction of the permethylzirconocene complex 2 with water gives the mononuclear alkenyl zirconocene hydroxide 6 . An analogous product was assumed as the first step in the reaction of the corresponding zirconocene complex 4 with water which ends up in a dinuclear zirconoxane. In the conversion of the permethylzirconocene complex 2 with carbon dioxide the mononuclear insertion product 7 was formed by coupling of carbon dioxide and the acetylene. In contrast, the corresponding zirconocene complex 4 affords, by an analogous reaction, a dinuclear complex. In additional experiments the known complex CpZr(η²‐PhC₂SiMe₃) ( 8 ) was prepared, starting from CpZrCl₂ and Mg in the presence of PhC≡CSiMe₃. This complex reacts with carbon dioxide resulting in a mixture of the regioisomeric zirconafuranones 9 a and 9 b . From these in the complex 9 a , having the SiMe₃ group in β‐position to the metal, the Zr–C bond was quickly hydrolyzed by water to give the complex CpZr(OH)OC(=O)–C(SiMe₃)=CHPh ( 10 a ) compared to complex ( 9 b ) which gives slowly the complex CpZr(OH)OC(=O)–CPh=CH(SiMe₃) ( 10 b ).