Ion-Pair Single-Drop Microextraction Determinations of Degradation Products of Chemical Warfare Agents in Water

Ion-pair single-drop microextraction (SDME) coupled to gas chromatography–mass spectroscopy (GC–MS) methods for the determination of four degradation products of chemical warfare agents were investigated in water. Acidic analytes were converted into their ion-pair complexes with cation surfactants in aqueous sample and then extracted into the organic single drop containing the derivatising agent. Upon injection, the analytes were derivatised in the GC injection hot port. Parameters, such as type of extraction solvent, ion-pairing (IP) reagent, reagent concentration, salt concentration, stirring speed and pH, were all optimized. This method is reproducible for spiked water sample for four different analytes (RSDs < 9.33 %, n = 5) and linear (r ² > 0.9945). The limit of detection (LOD) is in the range of 0.08–0.01 ng mL^?1 (S/N = 5) under GC–MS selected ion monitoring mode. The method was successfully applied to the proficiency test samples from the Organization for Prohibition of Chemical Weapons (OPCW).     

Monitoring of Polychlorinated Biphenyls in Surface Water Using Liquid Extraction,GC/MS,and GC/ECD

Abstract

A rapid and reliable analytical method, at trace level concentration was developed and validated for monitoring polychlorinated biphenyls (PCBs) in Jordanian surface water. The method combines the advantage of liquid extraction together with gas chromatography‐mass spectrometry (GC/MS) and gas chromatography‐electron capture detector (GC/ECD). The performance of the method was evaluated by analyzing certified reference material (CRM) of the analytes and applied on real water samples collected from different sites in Jordan. A mixture of 60∶40 dichloromethan‐petroleum ether was chosen as a convenient binary solvent for liquid–liquid extraction. The GC conditions for GC/MS were optimized using He as a carrier gas, temperature programming, and chlorpropham as an internal standard (IS).

The conditions for GC/ECD were performed using N₂ gas and a temperature program from 160 to 280°C with different increasing rates. The method of GC/MS in the selective ion mode (SIM) gave linear relationships for all PCBs tested between 0.60–6.0 µg/l with R ²=0.9934 (n=7×18). Recoveries from spiked water samples ranged between 87.6 and 91.4%. The mean accuracy and precision obtained were 4.9% and 2.16%, respectively. The mean of detection limit was 0.14±0.04 µg/l. In GC/ECD, linear relationships for all PCBs examined over the range of 0.3–2.4 µg/l was verified as characterized by a linear regression equation and correlation coefficient, R ²=0.9915 (n=12). The average precision and accuracy were 4.86% and 5.21%, respectively. Analyses results clarified that none of the examined Jordanian water samples contained any of the searched for PCBs within the detection limit achieved.     

Determination of Six Resorcylic Acid Lactones in Feed by GC–MS

A method was developed to simultaneously detect six resorcylic acid lactones in feed by GC–MS. Samples were extracted with methanol followed by a two step liquid–liquid extraction and an HLB SPE clean-up. The samples were derivatized with BSTFA + TMCS (99/1; v/v) and determined by GC–MS. For all analytes, the ranges of recoveries were 81.2–98.2%, with RSDs of 3.2–15.2%, and the LODs were 0.2–0.6 μg kg⁻¹.

     

LC-ESI-MS/MS Method for Simultaneous Determination of Triterpenoid Glycosides and Aglycones in Centella asiatica L.

A new and rapid method for simultaneous identification and estimation of bioactive triterpenoid glycosides [asiaticoside (AS) and madecassoside (MS)] and their aglycones [asiatic acid (AA) and madecassic acid (MA)] in Centella asiatica was developed by using high-performance liquid chromatography (HPLC) coupled with triple-quadrupole mass spectrometry (MS/MS). Estimation was based on multiple reaction monitoring (MRM) using the precursor → product ion combination for determination of four analytes using Alltima C18 column (50 × 4.6 mm, 3 µm). An electrospray ionization (ESI) tandem interface in positive mode was employed prior to mass-spectrometric detection. The method was subjected to a thorough validation procedure in terms of linearity, limit of detection (LOD) and quantification (LOQ), accuracy, and precision. Six-point calibration curves were linear in the range of 50–500 ng mL⁻¹ for AS and MS, and 25–250 ng mL⁻¹ for AA and MA, with excellent linearity (R ² > 0.98). With the optimized conditions, the four analytes were detected accurately within 10 min. LOD and LOQ ranged from 2.5 to 5 and 10 to 15 ng mL⁻¹, respectively. Method accuracy in terms of average recoveries of all four analytes ranged between 98.61 and 102.85 % at three spiking levels with intra- and interday precision relative standard deviation (RSD, %) of 1.01–4.62 and 1.13–4.16, respectively. The new method was successfully applied to estimate the concentration of these four bioactive compounds in extracts of C. asiatica prepared by nonpolar-to-polar solvents.

     

The Application and Validation of HybridSPE-Precipitation Cartridge Technology for the Rapid Clean-up of Serum Matrices (from Phospholipids) for the Clinical Analysis of Serotonin,Dopamine and Melatonin

Phospholipids have been shown to cause matrix effects particularly in liquid chromatography–mass spectrometry (LC–MS) analysis of small molecules. This results in suppression of the analyte signal. This study provides a versatile validated method for the analysis of serotonin in serum along with dopamine and melatonin using LC–MS/MS. It utilises HybridSPE-Precipitation cartridges for the clean-up of serum samples. This technology involves a simple protein precipitation step together with a fast and robust SPE method that is designed to remove phospholipids. Serotonin and dopamine are major neurotransmitters in the brain which affect various functions both in the brain and in the rest of the body. Melatonin plays an important role in the regulation of circadian sleep–wake cycle. Good linear calibrations were obtained for the multiplex assay of analytes in serum samples (0.021–3.268 μmol L⁻¹; R ² = 0.9983–0.9993). Acceptable intra- and inter-day repeatability was achieved for all analytes in serum. Excellent limits of detection (LOD) and limits of quantitation (LOQ) were achieved with LODs of 3.2–23.5 nmol L⁻¹ and the LOQs of 15.4–70.5 nmol L⁻¹ for these analytes in serum. The sample clean-up procedure that was developed provided efficient recovery and reproducibility while also decreasing preparation time and solvent use. A sample storage protocol was established, this was achieved by investigation of sample stability under different storage conditions. Evaluation of matrix effects was also carried out and the influence of ion suppression on analytical results reported. This clean-up protocol was then applied to the analysis of clinical serum samples.

     

Determination of Four Phenolic Compounds in Scirpus yagara Ohwi by CE with Amperometric Detection

A method based on capillary electrophoresis with amperometric detection has been developed for the determination of trans-resveratrol, scirpusin A, scirpusin B, and p-hydroxycinnamic acid in the rhizomes of Scirpus yagara Ohwi. The effects of the acidity and the concentration of the running buffer, separation voltage, injection time, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300 μm diameter carbon disc electrode at a detection potential of +0.90 V. The four analytes could be well separated within 12 min in a 40 cm length fused silica capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2). The relation between peak current and analyte concentration was linear over about three orders of magnitude with detection limits (S/N = 3) ranging from 32.2 to 63.4 μg L⁻¹ for the four analytes.

     

A Rapid and Sensitive LC–MS Method for Determination of Ezetimibe Concentration in Human Plasma: Application to a Bioequivalence Study

A selective and highly sensitive high performance liquid chromatography-electrospray ionization mass spectrometry method has been developed for determination of ezetimibe concentrations in human plasma. Ezetimibe was extracted from plasma with ethyl acetate followed by evaporation of the organic layer and, then, reconstitution of the residue in mobile phase before injection to chromatograph. The mobile phase consisted of acetonitrile-ammonium acetate (10 mM, pH 3.0), 75:25 (v/v). An aliquot of 10 μL was chromatographically analyzed on a prepacked Zorbax XDB-ODS C₁₈ column (2.1 × 100 mm, 3.5 micron). Detection of analytes was achieved by mass spectrometry with atmospheric pressure chemical ionization (APCI) interface in the negative ion mode operated under the multiple-reaction monitoring mode (m/z transition: ezetimibe 408–271). Standard curves were linear (r = 0.998) over the wide ezetimibe concentration range of 0.05–30.0 ng mL⁻¹ with acceptable accuracy and precision. The limit of detection was 0.02 ng mL⁻¹. The validated LC–APCI–MS method has been used successfully throughout a bioequivalence study on an ezetimibe generic product in 24 healthy male volunteers.

     

An efficient and fast microwave-assisted extraction method developed for the simultaneous determination of 18 organochlorine pesticides in sediment

An efficient and fast microwave-assisted extraction (MAE) method followed by gas chromatographic separation with mass spectrometric detection (GC–MS) was developed for the extraction of 18 organochlorine pesticides (OCPs) from sediment. Parameters affecting the MAE procedure such as the type and volume of the extraction solvent, irradiation power, temperature and irradiation time were successfully optimised. Under the optimal conditions, extraction efficiencies in the range of 73.4–119% were obtained with THF–HEX (9:1, v/v) for all OCPs studied. The method was linear over the range of 2.9–5000 ng g^?1 with determination coefficients (r²) higher than 0.992 for all analytes. The limits of detection, LODs (S/N = 3), obtained varied from 1.0 to 2.2 ng g^?1 and limits of quantification, LOQs (S/N = 10) were between 2.9 and 6.8 ng g^?1. The proposed method was successfully applied to the analysis of real sediment samples and acceptable recoveries from 70.1 to 124% with RSDs ≤14.8% were obtained. 10 OCPs were determined below their LOQ and 8 OCPs in the range of 124–2830 ng g^?1. The MAE method was compared with Soxhlet, shake flask and ultrasonic solvent extraction techniques. Thus, the MAE–GC–MS method could efficiently be used for selective extraction and quantification of the target analytes from the complex sediment matrices.     

Flow-assisted automated solid-phase microextraction for the determination of chloroethers in aqueous matrices

In this study a method of flow-assisted automated solid-phase microextraction (FA-SPME) was developed for the determination of organic pollutants in aqueous samples. A CTC Combi-PAL autosampler coupled with gas chromatography–mass spectrometry (GC–MS) was used to automate the entire extraction process. In this method, the SPME fibre was exposed to 100 mL of sample in a direct immersion mode for 10 min. After exposure, the fibre was desorbed at the injection port of GC–MS. To demonstrate the applicability of FA-SPME, chloroethers were selected as model compounds. Good linear correlation was found over a concentration range of 0.5–100 µg/L. The detection limits of the method were determined between 0.02 and 0.05 µg/L with the coefficients of determination (R²) from 0.9980 to 0.9996. The relative standard deviations (RSDs) of the FA-SPME for three sequential FA-SPME analyses were determined to be in the range between 1.2% and 6.2% (n = 3). The applicability of the method was assessed by means of recovery studies and satisfactory values for all compounds were obtained. This optimised method was used in the analysis of water and human urine samples to show the matrix effect on FA-SPME. This FA-SPME/GC–MS is substantially faster and suitable for the routine continuous flow-mode environmental monitoring applications.     

A Comparative Study of Hydrodistillation and Hydrodistillation–Solvent Microextraction Methods for Identification of Volatile Components of Echinophora cinerea

A recently developed hydrodistillation–solvent microextraction (HD–SME) method coupled to gas chromatography–mass spectrometry (GC–MS) was applied to the analysis of volatile components of aerial parts of Echinophora cinerea (Boiss). By the use of a simplex optimization method, the effects of extraction time, sample weight and microdrop volume on the extraction efficiency of the method were optimized. In the optimized conditions, 3 µL of n-heptadecane was suspended in the headspace of 6 g of hydrodistillating sample, using a microsyringe. After 7 min, the solvent was retracted back into the syringe and directly injected into the GC–MS injection port. The HD–SME method was compared to a conventional hydrodistillation technique. In general, the extraction with HD–SME was relatively faster and required smaller amounts of sample. The microextraction method also showed some selectivity towards α-phellandrene and Z-β-ocimene monoterpenes. A precision better than 6.5% (expressed as relative standard deviation) was obtained for the method.

     

Determination of BTEX Compounds by Dispersive Liquid–Liquid Microextraction with GC–FID

Rapid, inexpensive, and efficient sample-preparation by dispersive liquid–liquid microextraction (DLLME) then gas chromatography with flame ionization detection (GC–FID) have been used for extraction and analysis of BTEX compounds (benzene, toluene, ethylbenzene, and xylenes) in water samples. In this extraction method, a mixture of 25.0 μL carbon disulfide (extraction solvent) and 1.00 mL acetonitrile (disperser solvent) is rapidly injected, by means of a syringe, into a 5.00-mL water sample in a conical test tube. A cloudy solution is formed by dispersion of fine droplets of carbon disulfide in the sample solution. During subsequent centrifugation (5,000 rpm for 2.0 min) the fine droplets of carbon disulfide settle at the bottom of the tube. The effect of several conditions (type and volume of disperser solvent, type of extraction solvent, extraction time, etc.) on the performance of the sample-preparation step was carefully evaluated. Under the optimum conditions the enrichment factors and extraction recoveries were high, and ranged from 122–311 to 24.5–66.7%, respectively. A good linear range (0.2–100 μg L⁻¹, i.e., three orders of magnitude; r ² = 0.9991–0.9999) and good limits of detection (0.1–0.2 μg L⁻¹) were obtained for most of the analytes. Relative standard deviations (RSD, %) for analysis of 5.0 μg L⁻¹ BTEX compounds in water were in the range 0.9–6.4% (n = 5). Relative recovery from well and wastewater at spiked levels of 5.0 μg L⁻¹ was 89–101% and 76–98%, respectively. Finally, the method was successfully used for preconcentration and analysis of BTEX compounds in different real water samples.

     

Generic Automated Fluorimetric Assay for the Quality Control of Gamma Aminobutyric Acid-Analogue Anti-Epileptic Drugs Using Sequential Injection

The first sequential injection assay for the generic determination of gabapentin and pregabalin is reported. The analytes react with o-phthalaldehyde in the presence of N-acetylcysteine as a nucleophilic reagent in alkaline medium under flow conditions to form highly fluorescent derivatives. The effect of the main instrumental and chemical variables on the assay was examined. The proposed method was validated for both analytes in terms of linearity, detection, and quantitation limits (c _L  = 160 μg L^?1, c _Q  = 480 μg L^?1 for gabapentin, and c _L  = 70 μg L^?1, c _Q  = 210 μg L^?1 for pregabalin), precision (s _r  < 1.0% in both cases), selectivity, and accuracy. The applicability of the assay was demonstrated by successfully analyzing commercially available formulations. The experimental percent recoveries were in the range of 97.9–102.0% for gabapentin and 98.3–102.3% for pregabalin.     

Cyclodextrin-Modified Gold Nanoparticle Capillary Electrochromatography with Online Sample Stacking for Simultaneous and Sensitive Determination of Aminobenzoic Acid Isomers

A newly-developed method of complete separation and sensitive determination of o-, m-, and p-aminobenzoic acid isomers was achieved by combining open-tubular columns for capillary electrochromatography (OT-CEC) and online sample stacking. In this study, spherical gold nanoparticles were modified by a covalent attachment of mono-6-thio-β-cyclodextrin, and OT-CEC was formed by immobilizing cyclodextrin-modified gold nanoparticles (CD-AuNP) on prederivatized 3-mercaptopropyl-trimethoxysilane fused-silica capillaries. Based on the theory of moving chemical reaction boundary, effects of several important factors such as the pH and concentration of running buffer and the conditions of stacking analytes were optimized. The optimized separations were carried out in 58 mmol/L HAc buffer at pH 3.0 using a capillary coated with CD-AuNP, while the optimized concentration was carried out in 50 mmol/L disodium hydrogen phosphate (pH 9.5). The linear ranges for m-, p-, and o-aminobenzoic acid were from 5.0 × 10⁻⁴–0.1, 5.0 × 10⁻⁴–0.1 and 1.0 × 10⁻⁴–0.1 mmol/L, respectively. And the detection limits (S/N = 3) were as low as 8.22 × 10⁻⁵, 8.21 × 10⁻⁵, and 3.76 × 10⁻⁵ mmol/L for m-, p-, and o-aminobenzoic acid, respectively. The run-to-run, day-to-day, and column-to-column reproducibilities of migration time were satisfactory with relative standard deviation values of less than 4.5 % in all cases. This method was successfully used in determining procaine hydrochloride injection sample with recoveries in the range of 96.1–106.6 % and relative standard deviations less than 5.0 %.

     

Volatile and key odourant compounds of Turkish Berberis crataegina fruit using GC-MS-Olfactometry

This research was conducted to identify the aroma and aroma-active compounds of Berberis crataegina for the first time. Volatile profile of B. crataegina was obtained using the purge and trap extraction method with dichloromethane. Gas chromatography was coupled to mass spectrometry (GC–MS) allowed the quantitative and qualitative detection of 22 compounds in the sample. Aldehydes were the main chemical group in the sample and followed by aromatic alcohols and lactone. Aroma extract dilution analysis was implemented for the specification of key odourants of B. crataegina. In total, eight key odourants were detected in the extract of the sample, using GC–MS–Olfactometry and aldehydes were the leading chemical group. The key odourants, found to be contributing to the overall aroma in B. crataegina, were nonanal (FD = 1024; green, flowery), hexanal (FD = 512; green) and linalool (FD = 256; flowery, rose) because of high FD factors.     

Stir Bar Sorptive Extraction and LC–MS/MS for Trace Analysis of UV Filters in Different Water Matrices

A simple, selective and highly sensitive method was developed and optimized to determine the most commonly used UV filters with endocrine-disrupting potential in water, namely benzophenone-3 (BP-3), octocrylene (OC), ethylhexyl dimethyl p-aminobenzoate (OD-PABA), ethylhexyl methoxycinnamate, ethylhexyl salicylate (EHS) and homosalate (HMS). Samples were extracted by stir bar sorptive extraction followed by liquid desorption (SBSE-LD). The important factors influencing SBSE-LD were optimized. Under optimal conditions, assays were performed on 50 mL of water sample using stir bars (0.5 mm in film thickness, 10 mm in length) at room temperature. The analytes were determined by liquid chromatography–tandem mass spectrometry with triple quadrupole analyzer using atmospheric pressure chemical ionization. The main parameters in HPLC–APCI–MS/MS were also optimized to provide the best performances for all analytes. Moreover, matrix effect was investigated using two methods the post-column infusion system and the method of spiked matrices after extraction. As a result, no significant matrix effect on the analysis was observed. The method showed good linearity (R ² coefficients greater than 0.996 in different water samples after SBSE-LD). Recoveries of the analytes were close to 90%, except for BP-3 (64%) and OC (76%) with relative standard deviation lower than 11%. Detection limits were between 0.6 and 3.3 ng L⁻¹ for all the analytes except for HMS (94 ng L⁻¹) and EHS (114 ng L⁻¹). This methodology was applied to measure UV filters in seawater, river water and wastewater in different sites of Liguria; BP-3 and OC were found in most of the considered samples at rather low concentration level.

     

Fast GC–MS Pesticide Multiresidue Analysis of Apples

A fast gas chromatographic–mass spectrometric (GC–MS) method is proposed for pesticide multiresidue analysis of apples. The QuEChERS method was used for sample preparation. GC–MS analysis was performed with a PTV, an autoinjector, and a quadrupole benchtop MS detector. Electron-impact ionization (70 eV) was used with two modes of selected ion monitoring. Compounds were separated under temperature-programmed conditions on a narrow-bore diphenyldimethylsiloxane column. In one chromatographic run 61 pesticides of different chemical classes, and triphenyl phosphate as internal standard, were determined in 11 min. Calibration was performed with matrix-matched standard solutions and response to the pesticides was a linear function of concentration in the range 1–500 ng mL⁻¹ (equivalent to 1–500 μg kg⁻¹ in real samples). High values of the determination coefficients (R ²; 0.9900–1.0000) were obtained for most of the pesticides. Limits of detection and quantification were determined. When the method was used for analysis of pesticide residues in real samples, five pesticides were detected at concentrations in the range 1.00–21.47 μg kg⁻¹. Repeatability of measurements, expressed as relative standard deviations of absolute peak areas, normalized relative to TPP, and of the concentrations determined, met the EU criterion of RSD ≤ 20%. Use of the internal standard moderately improved quantitative results.

     

Magnetic solid-phase extraction using Schiff base ligand supported on magnetic nanoparticles as sorbent combined with dispersive liquid-liquid microextraction for the extraction of phenols from water samples

ABSTRACT

In this work, the magnetic sorbent was developed by covalent binding of a Schiff base ligand, N,N’-bis(3-salicyliden aminopropyl)amine (salpr), on the surface of silica coated magnetic nanoparticles (Salpr@SCMNPs). The core-shell nanoparticle was applied for the magnetic solid-phase extraction (MSPE) combined with dispersive liquid-liquid microextraction (DLLME) of phenolic compounds from water samples prior to gas chromatography-flame ionisation detector (GC?FID). Characterisation of the Salpr@SCMNPs was performed with different physicochemical methods such as Fourier transform infrared (FT-IR), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). Variables affecting the performance of both extraction steps such as pH of the water sample, the sorbent amount, the desorption conditions, the extraction time; and extraction solvent were studied. Under the optimised conditions, the analytical performances were determined with a linear range of 0.01–100 ng mL^?1 and a limit of detection at 0.003–0.02 ng mL^?1 for all of the analytes studied. The intra-day (n = 5) and inter-day (n = 3) relative standard deviations (RSD%) of three replicates were each demonstrated in the range of 6.9–8.9% and 7.3–10.1%, respectively. The proposed method was executed for the analysis of real water samples, whereby recoveries in the range of 92.9–99.0% and RSD% lower than 6.1% were attained.     

Polythiophene–Chitosan Magnetic Nanocomposite as a Novel Sorbent for Disperse Magnetic Solid Phase Extraction of Triazine Herbicides in Aquatic Media

In this paper, polythiophene/chitosan magnetic nanocomposite as a novel adsorbent is proposed for the preconcentration of triazines in aqueous samples prior to gas chromatography. The synthesized nanoparticles, magnetic chitosan and polythiophene–chitosan magnetic nanocomposite were characterized by scanning electron microscopy. The magnetic polythiophene–chitosan nanocomposite containing analytes could be removed from the sample solution by applying a permanent magnet. The major factors influencing the extraction efficiency including desorption conditions, nanocomposite components ratio, sorbent amount, extraction time, ionic strength and sample pH were optimized. The developed method proved to be rather convenient and offers sufficient sensitivity and good reproducibility. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) of the method under optimized conditions were 10–30 and 100 ng L⁻¹, respectively. Under the optimum conditions, good linearity was obtained within the range of 100–5000 ng L⁻¹ for all triazines with correlation coefficients >0.9994. The relative standard deviation at a concentration level of 150 ng L⁻¹ was 7–12 %. Furthermore, the method was successfully applied to the determination of triazines in real samples, where relative recovery percentages of 96–102 % were obtained. Compared with other methods, the current method is characterized by easy, fast separation and low detection limits.

     

Homogeneous Liquid–Liquid Microextraction Via Flotation Assistance (HLLME-FA) Method for the Pretreatment of Organochlorine Pesticides in Aqueous Samples and Determination by GC–MS

This work proposes a new, rapid and simple homogeneous liquid–liquid microextraction via flotation assistance technique for the analysis of six organochlorine pesticides in water samples. A special extraction cell was used to facilitate collection of the low-density solvent extract. No centrifugation was required in this procedure. Determination was carried using gas chromatography–mass spectrometry. The water sample solution was then added into the extraction cell containing appropriate mixture of extract and homogeneous solvents. In the first step, a homogeneous solution and then with the continuation of water sample injection, a cloudy solution was formed. Using air flotation, the organic solution was collected at the conical part of the designed cell. The optimized levels of effective parameters were found based on response surface methodology approach. Applying the optimized conditions to the system understudy, the limits of detection of all target analytes were obtained in the range of 1.4–7 ng mL⁻¹, while the precisions were found to be in the range of 11.08–14.87 (RSD, n = 3). The linearity of the method lay in the range of 10–150 ng mL⁻¹ with the coefficients of correlation (r ²) ranging from 0.998 to 0.999.

     

Rapid Determination of DDT and Its Metabolites in Environmental Water Samples with Mixed Ionic Liquids Dispersive Liquid–Liquid Microextraction Prior to HPLC-UV

In this paper, a novel mixed ionic liquids-dispersive liquid–liquid microextraction method was developed for rapid enrichment and determination of environmental pollutants in water samples. In this method, two kinds of ionic liquids, hydrophobic ionic liquid and hydrophilic ionic liquid, were used as extraction solvent and disperser solvent, respectively. DDT and its metabolites were used as model analytes and high-performance liquid chromatography with ultraviolet detector for the analysis. Factors that may affect the extraction recoveries, such as type and volume of extraction solvent (hydrophobic ionic liquid) and disperser solvent (hydrophilic ionic liquid), extraction time, sample pH and ionic strength, were investigated and optimized. Under the optimum conditions, the linear range was 1–100 μg L⁻¹, limits of detection could reach 0.21–0.49 μg L⁻¹, and relative standard deviation was 6.01–8.48 % (n = 7) for the analytes. Satisfactory results were achieved when the method was applied to analyze the target pollutants in environmental water samples with spiked recoveries over the range of 85.7–106.8 %.