Enhancement of Visible-Light-Driven Hydrogen Evolution Activity of 2D π-Conjugated Bipyridine-Based Covalent Organic Frameworks via Post-Protonation

Photocatalytic hydrogen (H₂) evolution represents a promising and sustainable technology. Covalent organic frameworks (COFs)-based photocatalysts have received growing attention. A 2D fully conjugated ethylene-linked COF (BTT-BPy-COF) was fabricated with a dedicated designed active site. The introduced bipyridine sites enable a facile post-protonation strategy to fine-tune the actives sites, which results in a largely improved charge-separation efficiency and increased hydrophilicity in the pore channels synergically. After modulating the degree of protonation, the optimal BTT-BPy-PCOF exhibits a remarkable H₂ evolution rate of 15.8 mmol g⁻¹ h⁻¹ under visible light, which surpasses the biphenyl-based COF 6 times. By using different types of acids, the post-protonation is proved to be a potential universal strategy for promoting photocatalytic H₂ evolution. This strategy would provide important guidance for the design of highly efficient organic semiconductor photocatalysts.     

One-Dimensional Covalent Organic Frameworks for the 2e− Oxygen Reduction Reaction

Two-dimensional covalent organic frameworks (2D COFs) are often employed for electrocatalytic systems because of their structural diversity. However, the efficiency of atom utilization is still in need of improvement, because the catalytic centers are located in the basal layers and it is difficult for the electrolytes to access them. Herein, we demonstrate the use of 1D COFs for the 2e⁻ oxygen reduction reaction (ORR). The use of different four-connectivity blocks resulted in the prepared 1D COFs displaying good crystallinity, high surface areas, and excellent chemical stability. The more exposed catalytic sites resulted in the 1D COFs showing large electrochemically active surface areas, 4.8-fold of that of a control 2D COF, and thus enabled catalysis of the ORR with a higher H₂O₂ selectivity of 85.8 % and activity, with a TOF value of 0.051 s⁻¹ at 0.2 V, than a 2D COF (72.9 % and 0.032 s⁻¹). This work paves the way for the development of COFs with low dimensions for electrocatalysis.     

Semiconductor/Covalent-Organic-Framework Z-Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z-scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z-scheme photocatalysts combining water-oxidation semiconductors (TiO₂, Bi₂WO₆, and α-Fe₂O₃) with CO₂ reduction COFs (COF-316/318) was synthesized and exhibited high photocatalytic CO₂-to-CO conversion efficiencies (up to 69.67 μmol g⁻¹ h⁻¹), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic-semiconductor systems utilizing the Z-scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor-to-COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

2D and 3D Porphyrinic Covalent Organic Frameworks: The Influence of Dimensionality on Functionality

The construction of 2D and 3D covalent organic frameworks (COFs) from functional moieties for desired properties has gained much attention. However, the influence of COFs dimensionality on their functionalities, which can further assist in COF design, has never been explored. Now, by selecting designed precursors and topology diagrams, 2D and 3D porphyrinic COFs (2D‐PdPor‐COF and 3D‐PdPor‐COF) are synthesized. By model building and Rietveld refinement of powder X‐ray diffraction, 2D‐PdPor‐COF crystallizes as 2D sheets while 3D‐PdPor‐COF adopts a five‐fold interpenetrated pts topology. Interestingly, compared with 2D‐PdPor‐COF, 3D‐PdPor‐COF showed interesting properties, including 1) higher CO₂ adsorption capacity; 2) better photocatalytic performance; and 3) size‐selective photocatalysis. Based on this study, we believe that with the incorporation of functional moieties, the dimensionality of COFs can definitely influence their functionalities.     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Modulating Benzothiadiazole-Based Covalent Organic Frameworks via Halogenation for Enhanced Photocatalytic Water Splitting

Two-dimensional covalent organic frameworks (2D COFs), an emerging class of crystalline porous polymers, have been recognized as a new platform for efficient solar-to-hydrogen energy conversion owing to their pre-designable structures and tailor-made functions. Herein, we demonstrate that slight modulation of the chemical structure of a typical photoactive 2D COF (Py-HTP-BT-COF) via chlorination (Py-ClTP-BT-COF) and fluorination (Py-FTP-BT-COF) can lead to dramatically enhanced photocatalytic H₂ evolution rates (HER=177.50 μmol h⁻¹ with a high apparent quantum efficiency (AQE) of 8.45 % for Py-ClTP-BT-COF). Halogen modulation at the photoactive benzothiadiazole moiety can efficiently suppress charge recombination and significantly reduce the energy barrier associated with the formation of H intermediate species (H*) on polymer surface. Our findings provide new prospects toward design and synthesis of highly active organic photocatalysts toward solar-to-chemical energy conversion.     

Boosting CO2 Photoreduction via Regulating Charge Transfer Ability in a One-Dimensional Covalent Organic Framework

Two-dimensional (2D) imine-based covalent organic frameworks (COFs) hold potential for photocatalytic CO₂ reduction. However, high energy barrier of imine linkage impede the in-plane photoelectron transfer process, resulting in inadequate efficiency of CO₂ photoreduction. Herein, we present a dimensionality induced local electronic modulation strategy through the construction of one-dimensional (1D) pyrene-based covalent organic frameworks (PyTTA-COF). The dual-chain-like edge architectures of 1D PyTTA-COF enable the stabilization of aromatic backbones, thus reducing energy loss during exciton dissociation and thermal relaxation, which provides energetic photoelectron to traverse the energy barrier of imine linkages. As a result, the 1D PyTTA-COF exhibits significantly enhanced CO₂ photoreduction activity under visible-light irradiation when coordinated with metal cobalt ion, yielding a remarkable CO evolution of 1003 μmol g⁻¹ over an 8-hour period, which surpasses that of the corresponding 2D counterpart by a factor of 59. These findings present a valuable approach to address in-plane charge transfer limitations in imine-based COFs.     

Designed Synthesis of a 2D Porphyrin‐Based sp2 Carbon‐Conjugated Covalent Organic Framework for Heterogeneous Photocatalysis

The construction of stable covalent organic frameworks (COFs) for various applications is highly desirable. Herein, we report the synthesis of a novel two‐dimensional (2D) porphyrin‐based sp² carbon‐conjugated COF (Por‐sp²c‐COF), which adopts an eclipsed AA stacking structure with a Brunauer—Emmett—Teller surface area of 689 m² g^?1. Owing to the C=C linkages, Por‐sp²c‐COF shows a high chemical stability under various conditions, even under harsh conditions such as 9 m HCl and 9 m NaOH solutions. Interestingly, Por‐sp²c‐COF can be used as a metal‐free heterogeneous photocatalyst for the visible‐light‐induced aerobic oxidation of amines to imines. More importantly, in comparison to imine‐linked Por‐COF, the inherent structure of Por‐sp²c‐COF equips it with several advantages as a photocatalyst, including reusability and high photocatalytic performance. This clearly demonstrates that sp² carbon‐linked 2D COFs can provide an interesting platform for heterogeneous photocatalysis.     

Modulating Benzothiadiazole‐Based Covalent Organic Frameworks via Halogenation for Enhanced Photocatalytic Water Splitting

Two‐dimensional covalent organic frameworks (2D COFs), an emerging class of crystalline porous polymers, have been recognized as a new platform for efficient solar‐to‐hydrogen energy conversion owing to their pre‐designable structures and tailor‐made functions. Herein, we demonstrate that slight modulation of the chemical structure of a typical photoactive 2D COF (Py‐HTP‐BT‐COF) via chlorination (Py‐ClTP‐BT‐COF) and fluorination (Py‐FTP‐BT‐COF) can lead to dramatically enhanced photocatalytic H₂ evolution rates (HER=177.50 μmol h^?1 with a high apparent quantum efficiency (AQE) of 8.45 % for Py‐ClTP‐BT‐COF). Halogen modulation at the photoactive benzothiadiazole moiety can efficiently suppress charge recombination and significantly reduce the energy barrier associated with the formation of H intermediate species (H*) on polymer surface. Our findings provide new prospects toward design and synthesis of highly active organic photocatalysts toward solar‐to‐chemical energy conversion.     

Nanoparticle Size-Fractionation through Self-Standing Porous Covalent Organic Framework Films

Covalent organic frameworks (COFs) have attracted attention due to their ordered pores leading to important industrial applications like storage and separation. Combined with their modular synthesis and pore engineering, COFs could become ideal candidates for nanoseparations. However, the fabrication of these microcrystalline powders as continuous, crack-free, robust films remains a challenge. Herein, we report a simple, slow annealing strategy to construct centimeter-scale COF films ( Tp-Azo and Tp-TTA ) with micrometer thickness. The as-synthesized films are porous (SA_BET=2033 m² g⁻¹ for Tp-Azo ) and chemically stable. These COFs have distinct size cut-offs (ca. 2.7 and ca. 1.6 nm for Tp-Azo and Tp-TTA , respectively), which allow the size-selective separation of gold nanoparticles. Unlike, other conventional membranes, the durable structure of the COF films allow for excellent recyclability (up to 4 consecutive cycles) and easy recovery of the gold nanoparticles from the solution.     

sp2 carbon-conjugated covalent organic frameworks for efficient photocatalytic degradation and visualized pH detection

The design and fabrication of versatile covalent organic frameworks (COFs) with multiple properties for diverse applications is highly desirable. Here, the difunctional COFs material g–C₁₈N₃–COF was prepared and modified to be applied for efficient photocatalytic degradation of Rhodamine B (RhB) and pH detection, respectively. Owing to the triazine unit which was suitable for photocatalyst construction, g–C₁₈N₃–COF was sensitive to visible light and exhibited excellent photocatalysis capability toward RhB. Specially, the photocatalytic degradation of RhB with a high concentration of 300 ppm using g–C₁₈N₃–COF reached equilibrium within 6 h. Moreover, g–C₁₈N₃–COF was further grown in-situ onto the filter paper to generate a novel composite material g–C₁₈N₃–COF@Paper with bright yellow fluorescence. g–C₁₈N₃–COF@Paper could visualize the pH detection by remarkable changes in its fluorescent intensity and color in the range of pH value from 1 to 5, on account of the protonation of the nitrogen atoms from the triazine ring in g–C₁₈N₃–COF. The triazine-based sp² carbon-conjugated g–C₁₈N₃–COF, respectively, used as photocatalyst and sensor in this work offers a new strategy to construct the versatile COFs material, facilitating the application of functional COFs in the environmental protection field.     

Synthesizing Interpenetrated Triazine-based Covalent Organic Frameworks from CO2

Crystalline triazine-based covalent organic frameworks (COFs) are aromatic nitrogen-rich porous materials. COFs typically show high thermal/chemical stability, and are promising for energy applications, but often require harsh synthesis conditions and suffer from low crystallinity. In this work, we propose an environmentally friendly route for the synthesis of crystalline COFs from CO₂ molecules as a precursor. The mass ratio of CO₂ conversion into COFs formula unit reaches 46.3 %. The synthesis consists of two steps; preparation of 1,4-piperazinedicarboxaldehyde from CO₂ and piperazine, and condensation of the dicarboxaldehyde and melamine to construct the framework. The CO₂-derived COF has a 3-fold interpenetrated structure of 2D layers determined by powder X-ray diffraction, high-resolution transmission electron microscopy, and select-area electron diffraction. The structure shows a high Brunauer–Emmett–Teller surface area of 945 m² g⁻¹ and high stability against strong acid (6 M HCl), base (6 M NaOH), and boiling water over 24 hours. Post-modification of the framework with oxone has been demonstrated to modulate hydrophilicity, and it exhibits proton conductivity of 2.5×10⁻² S cm⁻¹ at 85 °C, 95 % of relative humidity.     

Postsynthetic Functionalization of Three‐Dimensional Covalent Organic Frameworks for Selective Extraction of Lanthanide Ions

Chemical functionalization of covalent organic frameworks (COFs) is critical for tuning their properties and broadening their potential applications. However, the introduction of functional groups, especially to three‐dimensional (3D) COFs, still remains largely unexplored. Reported here is a general strategy for generating a 3D carboxy‐functionalized COF through postsynthetic modification of a hydroxy‐functionalized COF, and for the first time exploration of the 3D carboxy‐functionalized COF in the selective extraction of lanthanide ions. The obtained COF shows high crystallinity, good chemical stability, and large specific surface area. Furthermore, the carboxy‐functionalized COF displays high metal loading capacities together with excellent adsorption selectivity for Nd³⁺ over Sr²⁺ and Fe³⁺ as confirmed by the Langmuir adsorption isotherms and ideal adsorbed solution theory (IAST) calculations. This study not only provides a strategy for versatile functionalization of 3D COFs, but also opens a way to their use in environmentally related applications.     

Dual Photosensitizer Coupled Three-Dimensional Metal-Covalent Organic Frameworks for Efficient Photocatalytic Reactions

In this work, we innovatively assembled two types of traditional photosensitizers, that is pyridine ruthenium/ferrum (Ru(bpy)₃²⁺/Fe(bpy)₃²⁺) and porphyrin/metalloporphyrin complex (2HPor/ZnPor) by covalent linkage to get a series of dual photosensitizer-based three-dimensional metal-covalent organic frameworks (3D MCOFs), which behaved strong visible light-absorbing ability, efficient electron transfer and suitable band gap for highly efficient photocatalytic hydrogen (H₂) evolution. Rubpy-ZnPor COF achieved the highest H₂ yield (30 338 μmol g⁻¹ h⁻¹) with apparent quantum efficiency (AQE) of 9.68 %@420 nm, which showed one of the best performances among all reported COF based photocatalysts. Furthermore, the in situ produced H₂ was successfully tandem used in the alkyne hydrogenation with ≈99.9 % conversion efficiency. Theoretical calculations reveal that both the two photosensitizer units in MCOFs can be photoexcited and thus contribute optimal photocatalytic activity. This work develops a general strategy and shows the great potential of using multiple photosensitive materials in the field of photocatalysis.     

A Covalent Organic Framework–Cadmium Sulfide Hybrid as a Prototype Photocatalyst for Visible‐Light‐Driven Hydrogen Production

CdS nanoparticles were deposited on a highly stable, two‐dimensional (2D) covalent organic framework (COF) matrix and the hybrid was tested for photocatalytic hydrogen production. The efficiency of CdS‐COF hybrid was investigated by varying the COF content. On the introduction of just 1 wt % of COF, a dramatic tenfold increase in the overall photocatalytic activity of the hybrid was observed. Among the various hybrids synthesized, that with 10 wt % COF, named CdS‐COF (90:10), was found to exhibit a steep H₂ production amounting to 3678 μmol h^?1 g^?1, which is significantly higher than that of bulk CdS particles (124 μmol h^?1 g^?1). The presence of a π‐conjugated backbone, high surface area, and occurrence of abundant 2D hetero‐interface highlight the usage of COF as an effective support for stabilizing the generated photoelectrons, thereby resulting in an efficient and high photocatalytic activity.     

2D sp2 Carbon‐Conjugated Porphyrin Covalent Organic Framework for Cooperative Photocatalysis with TEMPO

2D covalent organic frameworks (COFs) are receiving ongoing attention in semiconductor photocatalysis. Herein, we present a photocatalytic selective chemical transformation by combining sp² carbon‐conjugated porphyrin‐based covalent organic framework (Por‐sp²c‐COF) photocatalysis with TEMPO catalysis illuminated by 623 nm red light‐emitting diodes (LEDs). Highly selective conversion of amines into imines was swiftly afforded in minutes. Specifically, the π‐conjugation of porphyrin linker leads to extensive absorption of red light; the sp² ?C=C? double bonds linkage ensures the stability of Por‐sp²c‐COF under high concentrations of amine. Most importantly, we found that crystalline framework of Por‐sp²c‐COF is pivotal for cooperative photocatalysis with (2,2,6,6‐tetramethylpiperidin‐1‐yl)oxyl (TEMPO). This work foreshadows that the outstanding hallmarks of COFs, particularly crystallinity, could be exploited to address energy and environmental challenges by cooperative photocatalysis.     

Porous Covalent Organic Framework Based Hydrogen-Bond Nanotrap for the Precise Recognition and Separation of Gold

Utilizing weak interactions to effectively recover and separate precious metals in solution is of great importance but the practice remains a challenge. Herein, we report a novel strategy to achieve precise recognition and separation of gold by regulating the hydrogen-bond (H-bond) nanotrap within the pore of covalent organic frameworks (COFs). It is found that both COF-HNU25 and COF-HNU26 can efficiently capture Au^III with fast kinetics, high selectivity, and uptake capacity. In particular, the COF-HNU25 with the high density of H-bond nanotraps exhibits an excellent gold uptake capacity of 1725 mg g⁻¹, which is significantly higher than that (219 mg g⁻¹) of its isostructural COF (COF-42) without H-bond nanostrap in the pores. Importantly, the uptake capacity is strongly correlated to the number of H-bonds between phenolic OH in the COF and [AuCl₄]⁻ in water, and multiple H-bond interactions are the key driving force for the excellent gold recovery and reusability of the adsorbent.     

离子型共价有机框架材料的合成及其催化性能（英文）

共价有机框架(COFs)材料是在拓扑学基础上发展起来的一类新型有机晶体多孔聚合物.由于COFs材料具有较高的比表面积、良好的热稳定性和化学稳定性、可设计的孔结构以及容易修饰改性的特点,目前广泛用作催化剂或催化剂载体.COFs的构筑单体为有机小分子,其来源广泛且种类繁多,使得构筑单体多样化,便于通过构筑单体来调控目标材料的结构和功能.近年来对COFs的研究已经引起人们广泛关注.离子框架材料在气体分子的吸附与分离领域展示了良好性能,通过简单的离子交换过程,可以容易地将具有特定尺寸和功能的反离子引入到框架结构中来调控孔的尺寸大小,从而实现混合气体的有效分离.然而,在催化领域目前尚未见将具有特定催化功能的反离子基团引入到框架之中,研究离子框架材料的催化性能.本文设计合成了一种负电荷为骨架结构的离子型COFs材料.我们首先选取一种化学结构稳定的COF作为骨架前驱体,其中的单体具有可反应的活性基团酚羟基,然后通过与1,3-丙烷磺酸内酯进行开环反应,将烷基磺酸引入到孔中,经过弱碱处理后得到阴离子型COFs(I-COFs),然后通过简单的离子交换过程将具有催化活性的Mn2+以及[Mn(bpy)2]2+配位阳离子分别引入到COFs框架中,得到具有催化功能的新材料.我们考察了两种I-COFs对烯烃氧化制环氧化合物的催化性能,发现所得离子COFs对不同的反应底物均展示了较高的环氧化催化性能.结果证实了离子I-COF催化反应为多相催化,还表现出I-COFs催化剂具有较高的稳定性以及循环使用性能.我们认为,通过简单的离子交换过程,能够赋予I-COFs材料各种不同的功能,从而实现COFs在不同领域的应用.这为多孔材料的功能化设计提供了新的化学平台.     

Designing Thiophene-Enriched Fully Conjugated 3D Covalent Organic Framework as Metal-Free Oxygen Reduction Catalyst for Hydrogen Fuel Cells

The application of three-dimensional (3D) covalent organic frameworks (COFs) in renewable energy fields is greatly limited due to their non-conjugated skeletons. Here, we design and successfully synthesize a thiophene-enriched fully conjugated 3D COF (BUCT-COF-11) through an all-thiophene-linked saddle-shaped building block (COThTh-CHO). The BUCT-COF-11 exhibits excellent semiconducting property with intrinsic metal-free oxygen reduction reaction (ORR) activity. Using the COF as cathode catalyst, the assembled anion-exchange membrane fuel cells (AEMFCs) exhibited a high peak power density up to 493 mW cm⁻². DFT calculations reveal that thiophene introduction in the COF not only improves the conductivity but also optimizes the electronic structure of the sample, which therefore boosts the ORR performance. This is the first report on the application of COFs as metal-free catalysts in fuel cells, demonstrating the great potential of fully conjugated 3D COFs as promising semiconductors in energy fields.