Cyclodextrin-Modified Gold Nanoparticle Capillary Electrochromatography with Online Sample Stacking for Simultaneous and Sensitive Determination of Aminobenzoic Acid Isomers

A newly-developed method of complete separation and sensitive determination of o-, m-, and p-aminobenzoic acid isomers was achieved by combining open-tubular columns for capillary electrochromatography (OT-CEC) and online sample stacking. In this study, spherical gold nanoparticles were modified by a covalent attachment of mono-6-thio-β-cyclodextrin, and OT-CEC was formed by immobilizing cyclodextrin-modified gold nanoparticles (CD-AuNP) on prederivatized 3-mercaptopropyl-trimethoxysilane fused-silica capillaries. Based on the theory of moving chemical reaction boundary, effects of several important factors such as the pH and concentration of running buffer and the conditions of stacking analytes were optimized. The optimized separations were carried out in 58 mmol/L HAc buffer at pH 3.0 using a capillary coated with CD-AuNP, while the optimized concentration was carried out in 50 mmol/L disodium hydrogen phosphate (pH 9.5). The linear ranges for m-, p-, and o-aminobenzoic acid were from 5.0 × 10^?4–0.1, 5.0 × 10^?4–0.1 and 1.0 × 10^?4–0.1 mmol/L, respectively. And the detection limits (S/N = 3) were as low as 8.22 × 10^?5, 8.21 × 10^?5, and 3.76 × 10^?5 mmol/L for m-, p-, and o-aminobenzoic acid, respectively. The run-to-run, day-to-day, and column-to-column reproducibilities of migration time were satisfactory with relative standard deviation values of less than 4.5 % in all cases. This method was successfully used in determining procaine hydrochloride injection sample with recoveries in the range of 96.1–106.6 % and relative standard deviations less than 5.0 %.     

Determination of Citalopram Using Flow Injection-Solid Phase Extraction with Spectrofluorometric Detection

Citalopram, a selective serotonin reuptake inhibitor, is used as an antidepressant agent. In this study an on-line solid phase extraction method with spectrofluorometric detection was developed. Solid phase extraction cartridges contain 200 mg C18 with a particle size of 45 μm. The best solvent system found was consistend of ethanol and 0.1 M acetic acid (40:60, v/v) for elution. The optimized values of injection volume and flow rate were 1 mL and 2.5 mL min⁻¹. The excitation and emission wavelengths were 240 and 300 nm. The calibrations were linear in the concentration range of 1.0 × 10⁻⁷–1.5 × 10⁻⁶ M in aqueous solution and 2.5 × 10⁻⁷–1.2 × 10⁻⁶ M in serum. The limit of detection values were 1.6 × 10⁻⁸ M for citalopram in tablets and 1.7 × 10⁻⁸ M in serum samples. The limit of quantification values were 5.2 × 10⁻⁸ M for citalopram in tablets and 5.5 × 10⁻⁸ M in serum. The proposed method has been applied successfully for the determination of citalopram HBr in pharmaceutical tablets and also in spiked human serum. The recovery values of the method were 99.5–100.6% for tablets and 98.8–100.9% for serum.

     

Determination of Albumin Using the Chemiluminescence of Tb3+/K2S2O8 System

A new chemiluminescence system of Tb³⁺/K₂S₂O₈ was developed for the determination of albumin. Some experimental conditions were examined and optimized. The linear ranges of the calibration curves are 5.0 × 10^?9–5.0 × 10^?6 mol/L for bovine serum albumin, 5.0 × 10^?8–1.0 × 10^?5 mol/L for human serum albumin and 2.5 × 10^?7–1.0 × 10^?5 mol/L for ovalbumin, and the corresponding detection limits are 1.9 × 10^?9 mol/L, 1.5 × 10^?8 mol/L, and 1.5 × 10^?7 mol/L, respectively. The method was applied to the determination of albumin in human serum samples, and the results were in agreement with those obtained by the bromcresol green method. The relative errors for the analytical results were from ?2.0% to 4.3%.     

SPE then RP-LC for Simultaneous Analysis of Cyromazine and its Metabolite Melamine in Liquid Milk and Egg

Solid-phase extraction (SPE) and reversed-phase liquid chromatography (RP-LC) have been used for simple, sensitive simultaneous analysis of cyromazine and melamine residues in liquid milk and eggs. The conditions used for SPE and LC were investigated and optimized. A combined cation-exchange–reversed-phase cartridge was used for clean-up, and an ODS (C₁₈) column (150 mm × 4.6 mm i.d., 5-μm particles) with 62:38 (v/v) 5 mm sodium lauryl sulfate (pH 3.4)–acetonitrile as mobile phase was used for RP-LC. Under the optimum conditions the method limit of detection (LOD) for both cyromazine and melamine was 6.2 μg kg⁻¹ for liquid milk samples, and 11.5 μg kg⁻¹ for egg samples. Average recovery of cyromazine and melamine from milk samples was 90.3%, RSD 4.6–5.6%, and 99.6%, RSD 3.2–4.7%, respectively. Average recovery of cyromazine and melamine from egg samples was 85.3%, RSD 1.0–4.7%, and 89.6%, RSD 3.1–5.0%, respectively. The method enables detection of melamine and cyromazine at levels as low as 20.7 μg kg⁻¹ in liquid milk and 38.3 μg kg⁻¹ in egg.

     

A Simple,sensitive, and selective electrochemical aptasensor for cortisol based on rGO-AuNPs

Cortisol is a steroid hormone naturally produced by the adrenal glands. It participates in and controls several processes in the body and is considered an important physiological biomarker. Due to its very low concentrations in body fluids, its detection requires high sensitivity and specificity. Here, we present a simple electrochemical biosensor based on reduced graphene oxide (rGO) modified with gold nanoparticles (AuNPs) for the immobilization of the cortisol-specific aptamer (Ap) (MCH-Ap-AurGO/GCE). Important analytical parameters for identifying the target analyte were optimized, such as conditions and amount of immobilized Ap, the influence of the concentration and nature of the supporting electrolyte, pH of the medium, and incubation time. The optimized conditions for the aptasensor were: concentration of Ap 1.0 × 10⁻⁶ mol L⁻¹, support electrolyte Tris/HCl 50 mmol L⁻¹, MgCl₂ 10 mmol L⁻¹, and NaCl 10 mmol L⁻¹, at pH 5.0 and incubation time of 15 min. A linear response range was obtained from 1 × 10⁻¹⁸ up to 1 × 10⁻¹¹ mol L⁻¹ of cortisol with a detection limit (LOD) of 1.0 × 10⁻¹⁸ mol L⁻¹. A curve adjusted for operational purposes in the saliva sample was fitted for the concentration range between 0.5 × 10⁻¹⁴ and 1 × 10⁻¹¹ mol L⁻¹, with a linear regression equation ΔRtc/Rtc₁ = 2.70 + 0.17 × log([Cortisol]). The aptasensor demonstrated a great potential for detecting cortisol in a simple, fast, and highly sensitive way, opening its path for application in real samples, which present levels below the concentration in which cortisol is commonly found in body fluids.     

Simultaneous Determination of Procaspase Activating Compound 1 and Permeability Markers in Intestinal Perfusion Samples and Application to a Rat Intestinal Absorption Study

A sensitive and simple HPLC method for simultaneous determination of PAC-1 (first procaspase-activating compound), phenol red, and permeability markers (carbamazepine and furosemide) in perfusion samples was developed and validated to assess intestinal absorption of PAC-1 using single-pass intestinal perfusion technique (SPIP) in rats. The chromatographic separation was carried out on a Kromasil C₁₈ column (150 mm × 4.6 mm, 5 μm) with acetonitrile–methanol–30 mmol L⁻¹ phosphate buffer (pH 3.0, 25:10:65, v/v/v) as mobile phase at a flow rate of 1.0 mL min⁻¹, and the wavelength of the UV detector was set at 281 nm. The calibration curves were linear in the ranges of 2.40–48.0 μg mL⁻¹ for PAC-1; 3.60–72.0 μg mL⁻¹ for carbamazepine; 3.20–64.0 μg mL⁻¹ for furosemide, and 4.80–96.0 μg mL⁻¹ for phenol red (r > 0.999). Both the intra- and inter-day precisions (RSD%) of all analytes were less than 6.8 % at three concentration levels, while accuracy ranged from 95.4 to 104.5 %. Data obtained in all method validation studies indicated that the method was suitable for the intended purpose. The effective permeability values (P _eff) considering water flux with the help of non-permeable marker phenol red was calculated to be 0.42 × 10⁻⁴, 0.62 × 10⁻⁴, 0.32 × 10⁻⁴ cm s⁻¹ for PAC-1; 0.72 × 10⁻⁴, 0.77 × 10⁻⁴, 0.52 × 10⁻⁴ cm s⁻¹ for carbamazepine; 0.20 × 10⁻⁴, 0.16 × 10⁻⁴, 0.12 × 10⁻⁴ cm s⁻¹ for furosemide in duodenum, jejunum and ileum, respectively. The P _eff value can be increased by co-perfusion with verapamil, indicating that absorption of PAC-1 is efficiently transported by P-glycoprotein (P-gp) in the gut wall.

     

Stability study of α-bromophenylacetic acid: Does it represent an appropriate model analyte for chiral separations?

The stability of α-bromophenylacetic acid (BPAA) in 50% aqueous methanol solution has been tested. CE in different running buffers was used to separate BPAA from the decomposition reaction products α-hydroxyphenylacetic (mandelic) acid and α-methoxyphenylacetic acid. Suitable CE separation of all three compounds and other product, bromide, was achieved in 60 mmol/L formate buffer (pH 3.0) at −30 kV in 50 μm (i.d.) poly(vinyl alcohol)-coated fused silica capillary (30 cm/24.5 cm) with UV detection at 200 nm. The CE method was applied to determine the reaction order of the decomposition of BPAA (0.47 mmol/L) via nucleophilic substitution in 50% aqueous methanol. The first-order reaction kinetics was confirmed by linear and non-linear regression, giving the rate constants 1.52 × 10⁻⁴ ± 2.76 × 10⁻⁵ s⁻¹ and 7.89 × 10⁻⁵ ± 5.02 × 10⁻⁶ s⁻¹, respectively. Additionally, the degradation products were identified by CE coupled to mass spectrometric (MS) detection. The CE–MS experiments carried out in 60 mmol/L formate buffer (pH 3.0) and in 60 mmol/L acetate buffer (pH 5.0) confirmed the results obtained by CE–UV. Furthermore, the stability of BPAA in polar solvents was tested by ¹H NMR experiments. Our results provide strong evidence of the instability and fast degradation of BPAA in 50% aqueous methanol indicating that BPAA is not suitable as the model analyte for chiral separations.     

A Validated HPLC Method with Fluorescence Detection for the Determination of Droperidol in Pharmaceutical Tablets,Human Serum,and Human Milk

A sensitive and simple HPLC method with fluorimetric detection has been developed for determination of droperidol in pharmaceutical tablets, human serum, and human milk. Chromatography was performed on a 100 mm × 3 mm i.d. C₁₈ column with methanol–water, 30:70 (v/v), pH 3.5, as mobile phase at a flow-rate of 0.8 mL min⁻¹. The injection volume was 5 μL and detection was by monitoring emission at 324 nm after excitation at 283 nm. Droperidol and p-hydroxybenzoic acid (internal standard) eluted after 5.3 and 6.1 min, respectively. The method was validated over the concentration range 1.14 × 10⁻⁷ to 9.12 × 10⁻⁶ M. Selectivity was good and the limits of detection and quantitation of the method were approximately 3.54 × 10⁻⁸ and 1.07 × 10⁻⁷ M, respectively, corresponding to 13 and 40 ng mL⁻¹. The applicability of the method to determination of droperidol in pharmaceuticals, human serum, and human milk was demonstrated.

     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

The Development and Validation of a Stability-Indicating UHPLC-DAD Method for Determination of Perindopril l-Arginine in Bulk Substance and Pharmaceutical Dosage Form

A stability-indicating ultra-high-performance liquid chromatography (UHPLC) method with a diode array detector was developed and validated for the determination of cis/trans isomers of perindopril l-arginine in bulk substance and pharmaceutical dosage form. The separation was achieved on a Poroshell 120 Hilic (4.6 × 150 mm, 2.7 µm) column using a mobile phase composed of acetonitrile–0.1 % formic acid (20:80 v/v) at a flow rate of 1 mL min⁻¹. The injection volume was 5.0 µL and the wavelength of detection was controlled at 230 nm. The selectivity of the UHPLC-DAD method was confirmed by determining perindopril l-arginine in the presence of degradation products formed during acid–base hydrolysis and oxidation as well as degradation in the solid state, at an increased relative air humidity and in dry air. The method’s linearity was investigated in the ranges 0.40–1.40 µg mL⁻¹ for isomer I and 0.40–2.40 µg mL⁻¹ for isomer II of perindopril l-arginine. The UHPLC-DAD method met the precision and accuracy criteria for the determination of the isomers of perindopril l-arginine. The limits of detection and quantitation were 0.1503 and 0.4555 µg mL⁻¹ for isomer I and 0.0356 and 0.1078 µg mL⁻¹ for isomer II, respectively.

     

Graphene/dodecanol floating solidification microextraction for the preconcentration of trace levels of cinnamic acid derivatives in traditional Chinese medicines

A novel graphene/dodecanol floating solidification microextraction followed by HPLC with diode‐array detection has been developed to extract trace levels of four cinnamic acid derivatives in traditional Chinese medicines. Several parameters affecting the performance were investigated and optimized. Also, possible microextraction mechanism was analyzed and discussed. Under the optimum conditions (amount of graphene in dodecanol: 0.25 mg/mL; volume of extraction phase: 70 μL; pH of sample phase: 3; extraction time: 30 min; stirring rate: 1000 rpm; salt amount: 26.5% NaCl; volume of sample phase: 10 mL, and without dispersant addition), the enrichment factors of four cinnamic acid derivatives ranged from 26 to 112, the linear ranges were 1.0 × 10⁻²–10.0 μg/mL for caffeic acid, 1.3 × 10⁻³–1.9 μg/mL for p‐hydroxycinnamic acid, 2.8 × 10⁻³–4.1 μg/mL for ferulic acid, and 2.7 × 10⁻³–4.1 μg/mL for cinnamic acid, with r ² ≥ 0.9993. The detection limits were found to be in the range of 0.1–1.0 ng/mL, and satisfactory recoveries (92.5–111.2%) and precisions (RSDs 1.1–9.5%) were also achieved. The results showed that the approach is simple, effective and sensitive for the preconcentration and determination of trace levels of cinnamic acid derivatives in Chinese medicines. The proposed method was compared with conventional dodecanol floating solidification microextraction and other extraction methods.     

Amperometric Tyrosinase Biosensor Based on Carbon Black Paste Electrode for Sensitive Detection of Catechol in Environmental Samples

In this work, a renewable tyrosinase-based biosensor was developed for the detection of catechol, using a carbon black paste electrode, without any mediator. The effect of pH, type of electrolyte, and amount of tyrosinase enzyme were explored for optimum analytical performance. The best-performing biosensor in amperometric experiments at potential −0.2 V vs. Ag/AgCl (3 mol L⁻¹ KCl) was obtained using a 0.1 mol L⁻¹ phosphate buffer solution (pH 7.0) as electrolyte. Under optimized conditions, the proposed biosensor had two concentration linear ranges from 5.0×10⁻⁹ to 4.8×10⁻⁸ and from 4.8×10⁻⁸ to 8.5×10⁻⁶ mol L⁻¹ and a limit of detection of 1.5×10⁻⁹ mol L⁻¹. The apparent Michaelis-Menten constant ( ) was calculated by the amperometric method, and the obtained value was 1.2×10⁻⁵ mol L⁻¹ whose result was similar when compared with other studies previously. The biosensor was applied in river water samples, and the results were very satisfactory, with recoveries near 100 %. In addition, the response of this biosensor for different compounds, taking into account their molecular structures was investigated and the results obtained showed no interference with the response potential of catechol. The electrochemical biosensor developed in this work can be considered highly advantageous because it does not require the use of a mediator (direct detection) for electrochemical response, and also because it is based on a low-cost materials that can be used with success to immobilise other enzymes and/or biomolecules.     

Liquid–Liquid Microextraction of Nitrophenols Using Supramolecular Solvent and Their Determination by HPLC with UV Detection

A novel, efficient, and environmentally friendly method—supramolecular solvent liquid–liquid microextraction (SMS-LLME) combined with high-performance liquid chromatography (HPLC)—was first established for the determination of p-nitrophenol and o-nitrophenol in water samples. Several important parameters influencing extraction efficiency, such as the type and volume of extraction solvent, pH of sample, temperature, salt effect, extraction time, and stirring rate, were optimized in detail. Under the optimal conditions, the enrichment factor was 166 for p-nitrophenol and 160 for o-nitrophenol, and the limits of detection by HPLC were 0.26 and 0.58 μg L⁻¹, respectively. Excellent linearity with coefficients of correlation from 0.9996 to 0.9997 was observed in the concentration range of 2–1,000 μg L⁻¹. The ranges of intra- and interday precision (n = 5) at 100 μg L⁻¹ of nitrophenols were 5.85–7.76 and 10.2–11.9 %, respectively. The SMS-LLME method was successfully applied for preconcentration of nitrophenols in environmental water samples.

     

Investigation on the Binding of Terazosin Hydrochloride and Naftopidil to an Immobilized α 1-Adrenoceptor by Zonal Elution

The interaction between drugs and receptors is particularly important in revealing the drug acting mechanism and developing new leads. In this work, α ₁-Adrenoceptor (α ₁-AR) from HEK293 cell line is purified and immobilized on the surface of macro-pore silica gel to prepare an high-performance affinity chromatography stationary phase for the pursuit of drug–receptor interactions by competition zonal elution. Naftopidil is found to have only one type of binding site to α ₁-AR with an association constant of 1.45 × 10⁶ M⁻¹ and a concentration of binding sites of 1.56 × 10⁻⁶ M, while terazosin hydrochloride proves to present two kinds of binding site on the receptor at which the association constants are determined to be 1.61 × 10⁵ M⁻¹ and 2.06 × 10³ M⁻¹, and the corresponding concentrations of the binding sites are 1.56 × 10⁻⁶ M and 1.11 × 10⁻³ M, respectively. It is concluded that the stationary phase containing attached α ₁-AR can be used to realize the binding of a drug to the receptor.

     

Determination of Diammonium Glycyrrhizinate and Its Antioxidant Activity Using a Novel Chemiluminescence System

A novel chemiluminescence (CL) system was established for the determination of diammonium glycyrrhizinate (DG) in pharmaceutical preparations and its ability of scavenging hydroxyl radical. It was shown that a strong CL signal was observed when Eosin Y mixed with Fenton reagent. The CL intensity was decreased significantly when DG was added to the reaction system and partially scavenged the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometrical relationship with DG concentration. Based on this, we developed a new method for the determination of DG using a flow injection chemiluminescence (FI-CL) technique. Under the optimal conditions, the linear range of DG concentration was 6.0 × 10^?8–5.0 × 10^?6 mol/L (R = 0.9982) with a detection limit of 8.0 × 10^?9 mol/L (SN = 3), and the RSD was 3.8% for 2.0 × 10^?7 mol/L DG (n = 11). This method was successfully used in the determination of DG in tablets and the evaluation of hydroxyl radical scavenging capacity of DG. The possible reaction mechanism of the CL system is discussed.     

Electrochemical Behavior and Determination of L‐Tyrosine at Single‐walled Carbon Nanotubes Modified Glassy Carbon Electrode

Based on single‐walled carbon nanotubes (SWCNTs) modified glassy carbon electrode (GCE/SWCNTs), a novel method was presented for the determination of L ‐tyrosine. The GCE/SWCNTs exhibited remarkable catalytic and enhanced effects on the oxidation of L ‐tyrosine. In 0.10 mol/L citric acid‐sodium citrate buffer solution, the oxidation potential of L ‐tyrosine shifted negatively from +1.23 V at bare GCE to +0.76 V at GCE/SWCNTs. Under the optimized experimental conditions, the linear range of the modified electrode to the concentration of L ‐tyrosine was 5.0×10^?6–2.0×10^?5 mol/L (R₁=0.9952) and 2.7×10^?5–2.6×10^?4 mol/L (R₂=0.9998) with a detection limit of 9.3×10^?8 mol/L. The kinetic parameters such as α (charge transfer coefficient) and D (diffusion coefficient) were evaluated to be 0.66, 9.82×10^?5 cm² s^?1, respectively. And the electrochemical mechanism of L ‐tyrosine was also discussed.     

Fast analysis of domoic acid using microchip electrophoresis with laser‐induced fluorescence detection

A fast and effective method was developed to detect domoic acid based upon microchip electrophoresis combined with laser‐induced fluorescence detection. Through study of the gated injection process on the cross channel of the microchip, the low‐voltage mode with relatively longer sample loading time was adopted to reduce the sample discrimination and improve the signal sensitivity. Fluorescein isothiocyanate was used as the derivatizing reagent for domoic acid. Under the optimized conditions, domoic acid was completely separated in 60 s with separation efficiency of 1.35 × 10⁵ m⁻¹. The calibration curve was obtained in the range of 1.0 × 10⁻⁹ to 1.0 × 10⁻⁷ mol/L, and the detection limit reached 2.8 × 10⁻¹⁰ mol/L. This developed method was successfully applied to analyze domoic acid in real samples.     

Ionic conductivity and thermal expansion of anion-deficient Sr11Mo4O23 perovskite

Transport properties of perovskite-type Sr₁₁Mo₄O₂₃ and composite Sr₁₁Mo₄O₂₃ - 1 wt% Al₂O₃ were studied at 400–1300 K in the oxygen partial pressure range from 0.21 down to 10⁻¹⁹ atm. The electromotive force and faradaic efficiency measurements, in combination with the energy-dispersive spectroscopy of the fractured electrochemical cells, unambiguously showed prevailing role of the oxygen ionic conductivity under oxidizing conditions. At temperatures above 600 K, protonic and cationic transport can be neglected. The oxygen ion transference numbers vary in the range of 0.95–1.00 at 973–1223 K. At temperatures lower than 550 K, the total conductivity of Sr₁₁Mo₄O₂₃ - 1 wt% Al₂O₃ composite measured by impedance spectroscopy tends to increase in wet atmospheres, thus indicating that hydration and protonic transport become significant. Reducing oxygen partial pressure below 10⁻¹⁰–10⁻⁹ atm leads to a significant increase in the n-type electronic conduction. The average thermal expansion coefficients in oxidizing atmospheres are (14.3–15.0) × 10⁻⁶ K⁻¹ at 340–740 K and (18.3–19.2) × 10⁻⁶ K⁻¹ at 870–1370 K.

     

A novel method for Co(Ⅱ) and Cu(Ⅱ) analysis by capillary electrophoresis with chemiluminescence detection

Based on the fact that some metal ions can catalyze the chemiluminescence(CL)reaction of luminol with K_3Fe(CN)_6,a novel capillary electrophoresis CL method was developed for the determination of Co(Ⅱ)and Cu(Ⅱ).The separation was carried out with a 10 mmol/L sodium acetate solution containing 0.8 mmol/L luminol and 2.0 mmol/Lα-HIBA(adjusted to pH 4.8 by HAc solution).The post-capillary reagent was 2.0 mmol/L K_3Fe(CN)_6 which was adjusted to pH 13.0 by NaOH solution.Under the optimum conditions,the detection limits(S/N=3)for Co(Ⅱ)and Cu(Ⅱ)were 7.5×10~(-11)mol/L and 7.5×10~(-9)mol/L,with the linear range of 7.5×10~(-9)mol/L to 1.0×10~(-6)mol/L and 7.5×10~(-8)mol/L to 5.0×10~(-5)mol/L, respectively.