Tuning the Performance of Room Temperature Phosphorescence Sensing Materials for Oxygen Using Factorial Designs

ABSTRACT

The effects of three experimental factors (pH, precursors, alcohol) on the sensing characteristics of these materials were screened by means of two-level factorial designs. The resulting materials turned out to be useful as luminescent probes for the measurement of dissolved and gaseous oxygen. The photochemical properties and the analytical performance of the RTP sensing phases have been studied by using both gas flow-injection analysis and continuous liquid flow-through systems. The proposed sensing materials were particularly suitable for measuring dissolved oxygen in natural waters. The detection limit attained was 0.004 mg.ml^?1 and a typical precision of ± 1.0% al a 0.6 mg.ml^?1 oxygen level was achieved. Response time for 90% of the final RTP value was less than 90s in a continuous flow mode. No hysteresis effects were noticed.     

Naphthyl Substituted Impurities Induce Efficient Room Temperature Phosphorescence

Accidentally, it was found that triphenylamine (TPA) from commercial sources shows ultralong yellow-green room temperature phosphorescence (RTP) like commercial carbazole, which however disappears for lab-synthesized TPA with high purity. Herein, we for the first time identify the impurity types that cause RTP of commercial TPA, which are two N, N-diphenyl-naphthylamine isomers. Due to similar molecular polarity and very trace amount (≈0.8 ‰, molar ratio), these naphthyl substituted impurities can be easily overlooked. We further show that even at an extremely low amount (1000000 : 1, mass ratio) of impurities, RTP emission is still generated, attributed to the triplet-to-triplet energy transfer mechanism. Notably, this doping strategy is also applicable to the triphenylphosphine and benzophenone host systems, of which strong RTP emission can be activated by simply doping the corresponding naphthyl substituted analogues into them. This work therefore provides a general and efficient host/guest strategy toward high performance and diverse organic RTP materials.     

Room Temperature Phosphorescence Optosensor for Terbium

Abstract

A solid surface room temperature phosphorescence optosensing method has been developed for the determination of terbium(III) based on the adsorption of its binary complex with 1,4-bis (l'-phenyl-3′-methyl-5′-pyrazolone-4′-) butanedione-(1,4) (BPMPBD) onto the hydrogen form of a strong cation exchange resin packed in a flow cell in an aqueous flow system. The phosphorescence intensity is a linear function of the concentration of terbium in the range of 8x10^?9 M-6x10^?7 M, and the detection limit is 3x10^?9 M terbium. The response mechanism was also studied. The present optosensor has been used for the determination of trace amounts of terbium in synthetic samples with satisfactory results.     

Ultralow-loss Optical Waveguides through Balancing Deep-Blue TADF and Orange Room Temperature Phosphorescence in Hybrid Antimony Halide Microstructures

Harnessing the potential of thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) is crucial for developing light-emitting diodes (LEDs), lasers, sensors, and many others. However, effective strategies in this domain are still relatively scarce. This study presents a new approach to achieving highly efficient deep-blue TADF (with a PLQY of 25 %) and low-energy orange RTP (with a PLQY of 90 %) through the fabrication of lead-free hybrid halides. This new class of monomeric and dimeric 0D antimony halides can be facilely synthesized using a bottom-up solution process, requiring only a few seconds to minutes, which offer exceptional stability and nontoxicity. By leveraging the highly adaptable molecular arrangement and crystal packing modes, the hybrid antimony halides demonstrate the ability to self-assemble into regular 1D microrod and 2D microplate morphologies. This self-assembly is facilitated by multiple non-covalent interactions between the inorganic cores and organic shells. Notably, these microstructures exhibit outstanding polarized luminescence and function as low-dimensional optical waveguides with remarkably low optical-loss coefficients. Therefore, this work not only presents a pioneering demonstration of deep-blue TADF in hybrid antimony halides, but also introduces 1D and 2D micro/nanostructures that hold promising potential for applications in white LEDs and low-dimensional photonic systems.     

Solid Surface Room Temperature Phosphorescence of Polychlorinated Dibenzofurans Enhanced by a Surface Active Agent

Abstract

Room temperature phosphorescence characteristics on filter paper of dibenzofuran (DF) and several polychlorinated dibenzofurans (PCDFs) in the presence of different heavy atoms in conjunction with a surface active agent, sodium lauryl sulfate (NaLS), have been studied. The use of this surfactant produces an enhancement of the phosphorescence intensity in all the cases studied, which improve the sensitivity in the determination of DF and PCDFs. The optimization of experimental conditions like type of filter paper, drying and cooling times of the filter paper after spotting the sample, irradiation time, concentration of heavy atom and concentration of surfactant has been carried out. Phosphorescence lifetimes, linear dynamic range, relative standard deviation and limit of detection of the different compounds were also determined.     

Use of an Imaging Spectrograph System with a Fiber Optical Sensor and Two Dimensional Cooled Ccd Detector For Solid Surface Room Temperature Phosphorescence of Pesticides

ABSTRACT

This paper presents a development of a fiber optic sensor for solid surface room temperature phosphorescence of pesticides. The system is based on an imaging spectrograph coupled with a cooled two-dimensional charge coupled device detector. An optimization approach using a different mode of reading out data, the effects of moisture in solid matrix phosphorescence and the effects of heavy atoms are discussed. Spectral characterizations on Whatman N⁰1 filter papers of Warfarin, Naptalam, and naphthalene-type pesticides were evaluated. Limits of detection at ng to pg levels were estimated for all compounds. Satisfactory reproducibility of measurements was observed. The standard addition method was used to determine concentrations of Warfarin and Naptalam pesticides present together in a mixture. Results obtained show the potential of the device for the quantitative analysis of environmental pollutants.     

胆酸盐簇集体刚性化微环境的灵敏指示——室温燐光探针法

胆酸盐是一类生物表面活性剂 ,一般含有羟基取代的类固醇骨架 ,并有一带负电的尾链 ,较为常见的胆酸盐有胆酸钠、脱氧胆酸钠、牛磺胆酸钠及牛磺脱氧胆酸钠等 .其分子结构见表 1及图 1所示 .Fig.1　Molecular structure of cholate surfactant胆酸盐是两亲分子 ,具有疏水性凸面和亲水性的凹面 ,在溶液中胆酸盐单体背靠背通过疏水 -亲脂作用力形成一个疏水内芯 ,亲水面朝向溶剂的簇集体 ,并增溶疏水性的小分子于簇集体内芯 ,使之处于一个疏水而高度保护的微环境中 .另外 ,胆酸盐单体之间通过疏水 -亲脂相互作用 ,可形成螺旋形簇集体 .由于具…     

Room-Temperature Multiple Phosphorescence from Functionalized Corannulenes: Temperature Sensing and Afterglow Organic Light-Emitting Diode**

Corannulene-derived materials have been extensively explored in energy storage and solar cells, however, are rarely documented as emitters in light-emitting sensors and organic light-emitting diodes (OLEDs), due to low exciton utilization. Here, we report a family of multi-donor and acceptor (multi-D-A) motifs, TCzPhCor, TDMACPhCor, and TPXZPhCor, using corannulene as the acceptor and carbazole (Cz), 9,10-dihydro-9,10-dimethylacridine (DMAC), and phenoxazine (PXZ) as the donor, respectively. By decorating corannulene with different donors, multiple phosphorescence is realized. Theoretical and photophysical investigations reveal that TCzPhCor shows room-temperature phosphorescence (RTP) from the lowest-lying T₁; however, for TDMACPhCor, dual RTP originating from a higher-lying T₁ (T₁^H) and a lower-lying T₁ (T₁^L) can be observed, while for TPXZPhCor, T₁^H-dominated RTP occurs resulting from a stabilized high-energy T₁ geometry. Benefiting from the high-temperature sensitivity of TPXZPhCor, high color-resolution temperature sensing is achieved. Besides, due to degenerate S₁ and T₁^H states of TPXZPhCor, the first corannulene-based solution-processed afterglow OLEDs is investigated. The afterglow OLED with TPXZPhCor shows a maximum external quantum efficiency (EQE_max) and a luminance (L_max) of 3.3 % and 5167 cd m⁻², respectively, which is one of the most efficient afterglow RTP OLEDs reported to date.     

An Effective Approach for the Silylation of Hydroxyl Compounds in Room Temperature Ionic Liquids

Abstract

The room temperature ionic liquid (RTIL) 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMImPF₆) is used as a “green” recyclable alternative to conventional solvents for the silylation of a series of hydroxyl compounds (alcohols and phenols) with t-butyldimethylchlorosilane (TBDMCS), which has some advantages such as simplicity of the synthetic procedure, the potential for recycling of the ionic liquid and the environmentally benign.     

室温离子液体在分离分析中的应用

室温离子液体是指室温或接近室温下全部由离子组成的有机液体物质,具有不挥发,不易燃,溶解范围大,对空气和热稳定等特点,作为一种“可设计”型的环境相对友好溶剂,已被成功应用于分离分析领域中。本文重点综述了离子液体近年来在毛细管电泳、液相色谱及气相色谱中的应用进展,也对离子液体在质谱和光谱中的应用作了介绍。     

Study on the Interaction of Mitomycin C with ct-DNA by Pd-Porphin Room Temperature Phosphorescence Probe

Study of the interaction of drugs with calf thymus DNA (ct-DNA) in molecular level1-4 is helpful to understand the fundamental aspects of activation of anticancer drugs and provide the valuable information for designing and developing new antitumor agents. Mitomycin C (MMC) is an anticancer drugs being widely used in clinic with high activity and effectiveness for many cancers. DNA has been proved to be the main target molecule of MMC in the body. The activated MMC can hinder the rep…     

Tough,Reprocessable, and Recyclable Dynamic Covalent Polymers with Ultrastable Long-Lived Room-Temperature Phosphorescence

Room-temperature phosphorescence (RTP) polymers, whose emission can persist for a long period after photoexcitation, are of great importance for practical applications. Herein, dynamic covalent boronic ester linkages with internal B−N coordination are incorporated into a commercial epoxy matrix. The reversible dissociation of B−N bonds upon loading provides an efficient energy dissipation pathway for the epoxy network, while the rigid epoxy matrix can inhibit the quenching of triplet excitons in boronic esters. The obtained polymers exhibit enhanced mechanical toughness (12.26 MJ m⁻³), ultralong RTP (τ=540.4 ms), and shape memory behavior. Notably, there is no apparent decrease in the RTP property upon prolonged immersion in various solvents because the networks are robust. Moreover, the dynamic bonds endow the polymers with superior reprocessablity and recyclability. These novel properties have led to their potential application for information encryption and anti-counterfeiting.     

Determination of Gold by Flame Atomic Absorption Spectrometry with Hollow Fiber Liquid Phase Microextraction Using Room Temperature Ionic Liquids

A novel method to preconcentrate gold was developed employing a synergistic enhancement of a room temperature ionic liquid combined with hollow fiber liquid phase micro-extraction with flame atomic absorption spectrometry detection. The method is based on the complexation of gold with dithizone. The formed hydrophobic complex was subsequently extracted into the lumen of a hollow fiber. The organic phase was siphoned into FAAS for the determination. A room temperature ionic liquid and dithizone were used the enhancement reagent and chelating reagent, respectively. The addition of a room temperature ionic liquid led to a five-fold improvement in the extraction of gold. The 1-octanol was immobilized in the pores of the polypropylene hollow fiber as the liquid membrane and was also used as the acceptor solution. Some parameters that influenced extraction and determination were evaluated in detail, such as concentrations of the ionic liquid and dithizone, pH of samples, stirring rates, extraction time, and interferences. Under optimized conditions, a detection limit of 0.9 ng mL^?1 and an enrichment factor of 130 were achieved. The relative standard deviation (RSD) was 3.7% for Au (40 ng mL^?1, n = 5). The proposed method was successfully applied to the determination of gold in certified reference environmental samples and ore samples with satisfactory results.     

Amperometric Detection of Ethanol Vapors by Screen Printed Electrodes Modified by Paper Crowns Soaked with Room Temperature Ionic Liquids

A convenient assembly recently proposed for screen printed gold electrodes (SPEs) suitable for measurements in gaseous samples is here tested for the analysis of the ethanol content in alcoholic drinks. This assembly involves the use of a circular crown of filter paper, soaked in the room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium hydrogen sulfate, which is simply placed upon a disposable screen printed cell, so as to contact the outer edge of the gold disc working electrode, as well as peripheral counter and reference electrodes. The electrical contact between the paper crown soaked in RTIL and the SPE electrode is assured by a gasket and all components are installed in a polylactic acid holder. This assembly provides a portable and disposable electrochemical platform, assembled by the easy immobilization onto a porous and inexpensive supporting material such as paper of a RTIL characterized by profitable electrical conductivity and negligible vapor pressure. The electroanalytical performance of this device was assayed for the flow injection analysis of the ethanol concentration in some real samples of wine and beer and the results obtained are compared with the alcoholic degree reported in the relevant bottle-labels, thus highlighting a substantially satisfactory agreement. Repeatable sharp peaks (RSD=6–8 %) were detected for ethanol over a wide linear range (1–20 % v/v in water) and a detection and quantitation limit of 0.55 % v/v and 1.60 % v/v were inferred for a signal-to-noise ratio of 3 and 10, respectively.     

Multi-stimulus Room Temperature Phosphorescent Polymers Sensitive to Light and Acid cyclically with Energy Transfer

The stimulus-responsive room temperature phosphorescent (RTP) materials have endowed wide potential applications. In this work, by introducing naphthalene and spiropyran (SP) into polyacrylamide as the energy donor and acceptor respectively, a new kind of brilliant dynamic color-tunable amorphous copolymers were prepared with good stability and processibility, and afterglow emissions from green to orange in response to the stimulus of photo or acid, thanks to multi-responsibility of SP and the energy transfer between naphthalene and SP. In addition to the deeply exploring of the inherent mechanism, these copolymers have been successfully applied in dynamically controllable applications in information protection and delivery.     

Rate and Extent of Carbon Dioxide Uptake In Room Temperature Ionic Liquids: A New Approach Using Microdisc Electrode Voltammetry

A simple method is introduced which enables the simultaneous determination of both the maximum CO₂ concentration and kinetics of CO₂ uptake and release by a room temperature ionic liquid. This method is based upon the analysis of chronoamperometry recorded in bulk ionic liquid at intervals during exposure to CO₂ and subsequent exposure to vacuum to remove the dissolved CO₂. Comparing experimental data with a numerical model reveals the rate‐limiting factors for both uptake and release of CO₂.     

Electrochemical Ammonia Gas Sensing in Nonaqueous Systems: A Comparison of Propylene Carbonate with Room Temperature Ionic Liquids

First, the direct and indirect electrochemical oxidation of ammonia has been studied by cyclic voltammetry at glassy carbon electrodes in propylene carbonate. In the case of the indirect oxidation of ammonia, its analytical utility of indirect for ammonia sensing was examined in the range from 10 and 100 ppm by measuring the peak current of new wave resulting from reaction between ammonia and hydroquinone, as function of ammonia concentration, giving a sensitivity 1.29×10^?7 A ppm^?1 (r²=0.999) and limit‐of‐detection 5 ppm ammonia. Further, the direct oxidation of ammonia has been investigated in several room temperature ionic liquids (RTILs), namely 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), 1‐butyl‐3‐methylimidazolium trifluoromethylsulfonate ([C₄mim] [OTf]), 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₂mim] [NTf₂]), 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim] [NTf₂]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim] [PF₆]) on a 10 μm diameter Pt microdisk electrode. In four of the RTILs studied, the cyclic voltammetric analysis suggests that ammonia is initially oxidized to nitrogen, N₂, and protons, which are transferred to an ammonia molecule, forming NH via the protonation of the anion(s) (A^?). However, in [C₄mim] [PF₆], the protonated anion was formed first, followed by NH . In all five RTILs, both HA and NH are reduced at the electrode surface, forming hydrogen gas, which is then oxidized. The analytical ability of this work has also been explored further, giving a limit‐of‐detection close to 50 ppm in [C₂mim] [NTf₂], [C₄mim] [OTf], [C₄mim] [BF₄], with a sensitivity of ca. 6×10^?7 A ppm^?1 (r²=0.999) for all three ionic liquids, showing that the limit of detection was ca. ten times larger than that in propylene carbonate since ammonia in propylene carbonate might be more soluble in comparison with RTILs when considering the higher viscosity of RTILs.     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.     

Room Temperature Ionic Liquids (RTILs) and Multiwalled Carbon Nanotubes (MWCNTs) as Modifiers for Improvement of Carbon Paste Ion Selective Electrode Response; A Comparison Study with PVC Membrane

Room temperature ionic liquids (RTILs), 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmim]BF₄, and multiwalled carbon nanotubes (MWCNTs) were used for improvement of a praseodymium carbon paste ion selective sensor response. [bmim]BF₄ can be a better binder than mineral oils. MWCNTs have a good conductivity which helps the transduction of the signal in carbon paste electrode. The characteristics of these electrodes as potentiometric sensors were evaluated and compared with PVC membrane sensor. The results indicate that potentiometric sensor constructed with ionic liquid shows an increase in performance in terms of Nernstian slope, selectivity, response time, and response stability compared to Pr(III) PVC membrane sensor.