Rationalizing the AlI-Promoted Oxidative Addition of C−C Versus C−H Bonds in Arenes

The factors controlling the oxidative addition of C−C and C−H bonds in arenes mediated by Al^I have been computationally explored by means of Density Functional Theory calculations. To this end, we compared the processes involving benzene, naphthalene and anthracene which are promoted by a recently prepared anionic Al^I-carbenoid. It is found that this species exhibits a strong tendency to oxidatively activate C−H bonds over C−C bonds, with the notable exception of benzene, where the C−C bond activation is feasible but only under kinetic control reaction conditions. State-of-the-art computational methods based on the combination of the Activation Strain Model of reactivity and the Energy Decomposition Analysis have been used to rationalize the competition between both bond activation reactions as well as to quantitatively analyze in detail the ultimate factors controlling these transformations.     

Arene C−H Activation at Aluminium(I): meta Selectivity Driven by the Electronics of SNAr Chemistry

The reactivity of the electron-rich anionic Al^I aluminyl compound K₂[(NON)Al]₂ (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene) towards mono- and disubstituted arenes is reported. C−H activation chemistry with n-butylbenzene gives exclusively the product of activation at the arene meta position. Mechanistically, this transformation proceeds in a single step via a concerted Meisenheimer-type transition state. Selectivity is therefore based on similar electronic factors to classical S_NAr chemistry, which implies the destabilisation of transition states featuring electron-donating groups in either ortho or para positions. In the cases of toluene and the three isomers of xylene, benzylic C−H activation is also possible, with the product(s) formed reflecting the feasibility (or otherwise) of competing arene C−H activation at a site which is neither ortho nor para to a methyl substituent.     

Direct C−H Borylation of Arenes Catalyzed by Saturated Hydride-Boryl-Iridium-POP Complexes: Kinetic Analysis of the Elemental Steps

The saturated trihydride IrH₃{κ³-P,O,P-[xant(PiPr₂)₂]} ( 1 ; xant(PiPr₂)₂=9,9-dimethyl-4,5-bis(diisopropylphosphino)xanthene) activates the B−H bond of two molecules of pinacolborane (HBpin) to give H₂, the hydride-boryl derivatives IrH₂(Bpin){κ³-P,O,P-[xant(PiPr₂)₂]} ( 2 ) and IrH(Bpin)₂{κ³-P,O,P-[xant(PiPr₂)₂]} ( 3 ) in a sequential manner. Complex 3 activates a C−H bond of two molecules of benzene to form PhBpin and regenerates 2 and 1 , also in a sequential manner. Thus, complexes 1 , 2 , and 3 define two cycles for the catalytic direct C−H borylation of arenes with HBpin, which have dihydride 2 as a common intermediate. C−H bond activation of the arenes is the rate-determining step of both cycles, as the C−H oxidative addition to 3 is faster than to 2 . The results from a kinetic study of the reactions of 1 and 2 with HBpin support a cooperative function of the hydride ligands in the B−H bond activation. The addition of the boron atom of the borane to a hydride facilitates the coordination of the B−H bond through the formation of κ¹- and κ²-dihydrideborate intermediates.     

How Doping Affects the Activity of the Aluminum Oxide Support

The performance of heteronuclear clusters [AlXO₃]⁺ (X=Al, AlO₄, AlMg₂O₂, AlZnO, AlAu₂, Mg, Y, VO, NbO, TaO) in activating methane has been explored by a combination of high–level quantum calculations with reported and supplementary gas-phase experiments. With different dopants in [AlXO₃]⁺, the mechanism, reactivity and selectivity towards methane activation varies accordingly. The classic HAT competes with PCET, depending on the composition of intramolecular interactions. Although the existence of terminal oxygen radical is beneficial for classic HAT, the Al_t−C interaction in the [AlXO₃]⁺ clusters as enhanced by the strongly electronegative doping groups (X=Al, AlZnO, Mg, Zn, VO, NbO, TaO) favors the PCET process, facilitating C−H bond breaking. In addition, with different dopants, the destiny of the split methyl group varies accordingly. While strong interaction between Al_t and CH₃ results in the formation of the Al_t−C bond, dopants with variable valance may promote the formation of deep-oxidation products like formaldehyde. It has been discussed in detail how to regulate the activity and selectivity of the active center of the catalyst via rational doping.     

Mechanistic Insights into Palladium‐Catalyzed Silylation of Aryl Iodides with Hydrosilanes through a DFT Study

The catalytic cycles of palladium‐catalyzed silylation of aryl iodides, which are initiated by oxidative addition of hydrosilane or aryl iodide through three different mechanisms characterized by intermediates R₃Si−Pd^II−H (Cycle A), Ar−Pd^II−I (Cycle B), and Pd^IV (Cycle C), have been explored in detail by hybrid DFT. Calculations suggest that the chemical selectivity and reactivity of the reaction depend on the ligation state of the catalyst and specific reaction conditions, including feeding order of substrates and the presence of base. For less bulky biligated catalyst, Cycle C is energetically favored over Cycle A, through which the silylation process is slightly favored over the reduction process. Interestingly, for bulky monoligated catalyst, Cycle B is energetically more favored over generally accepted Cycle A, in which the silylation channel is slightly disfavored in comparison to that of the reduction channel. Moreover, the inclusion of base in this channel allows the silylated product become dominant. These findings offer a good explanation for the complex experimental observations. Designing a reaction process that allows the oxidative addition of palladium(0) complex to aryl iodide to occur prior to that with hydrosilane is thus suggested to improve the reactivity and chemoselectivity for the silylated product by encouraging the catalytic cycle to proceed through Cycles B (monoligated Pd⁰ catalyst) or C (biligated Pd⁰ catalyst), instead of Cycle A.     

C?H Activation of Benzene by a Photoactivated NiII(azide): Formation of a Transient Nickel Nitrido Complex

Photochemical activation of nickel‐azido complex 2 [Ni(N₃)(PNP)] (PN^HP=2,2′‐di(isopropylphosphino)‐4,4′‐ditolylamine) in neat benzene produces diamagnetic complex 3 [Ni(Ph)(PN^PN^H)], which is crystallographically characterized. DFT calculations support photoinitiated N₂‐loss of the azido complex to generate a rare, transient Ni^IV nitrido species, which bears significant nitridyl radical character. Subsequent trapping of this nitrido through insertion into the Ni P bond generates a coordinatively unsaturated Ni^II imidophosphorane PN donor. This species shows unprecedented reactivity toward 1,2‐addition of a C H bond of benzene to form 3 . The structurally characterized chlorido complex 4 [Ni(Cl)(PN^PN^H)] is generated by reaction of 3 with HCl or by direct photolysis of 2 in chlorobenzene. This is the first report of aromatic C H bond activation by a trapped transient nitrido species of a late transition metal.     

CH Activation of Benzene by a Photoactivated NiII(azide): Formation of a Transient Nickel Nitrido Complex

Photochemical activation of nickel‐azido complex 2 [Ni(N₃)(PNP)] (PN^HP=2,2′‐di(isopropylphosphino)‐4,4′‐ditolylamine) in neat benzene produces diamagnetic complex 3 [Ni(Ph)(PN^PN^H)], which is crystallographically characterized. DFT calculations support photoinitiated N₂‐loss of the azido complex to generate a rare, transient Ni^IV nitrido species, which bears significant nitridyl radical character. Subsequent trapping of this nitrido through insertion into the Ni? P bond generates a coordinatively unsaturated Ni^II imidophosphorane P?N donor. This species shows unprecedented reactivity toward 1,2‐addition of a C? H bond of benzene to form 3 . The structurally characterized chlorido complex 4 [Ni(Cl)(PN^PN^H)] is generated by reaction of 3 with HCl or by direct photolysis of 2 in chlorobenzene. This is the first report of aromatic C? H bond activation by a trapped transient nitrido species of a late transition metal.     

Reversible Hydride Migration from C5Me5 to RhI Revealed by a Cooperative Bimetallic Approach

The use of cyclopentadienyl ligands in organometallic chemistry and catalysis is ubiquitous, mostly due to their robust spectator role. Nonetheless, increasing examples of non-innocent behaviour are being documented. Here, we provide evidence for reversible intramolecular C−H activation at one methyl terminus of C₅Me₅ in [(η-C₅Me₅)Rh(PMe₃)₂] to form a new Rh−H bond, a process so far restricted to early transition metals. Experimental evidence was acquired from bimetallic rhodium/gold structures in which the gold center binds either to the rhodium atom or to the activated Cp* ring. Reversibility of the C−H activation event regenerates the Rh^I and Au^I monometallic precursors, whose cooperative reactivity towards polar E−H bonds (E=O, N), including the N−H bonds in ammonia, can be understood in terms of bimetallic frustration.     

Cover Feature: Mechanism of Oxidative Activation of Fluorinated Aromatic Compounds by N-Bridged Diiron-Phthalocyanine: What Determines the Reactivity? (Chem. Eur. J. 63/2019)

The biodegradation of compounds with C−F bonds is challenging due to the fact that these bonds are stronger than the C−H bond in methane. In this work, results on the unprecedented reactivity of a biomimetic model complex that contains an N-bridged diiron-phthalocyanine are presented; this model complex is shown to react with perfluorinated arenes under addition of H₂O₂ effectively. To get mechanistic insight into this unusual reactivity, detailed density functional theory calculations on the mechanism of C₆F₆ activation by an iron(IV)-oxo active species of the N-bridged diiron phthalocyanine system were performed. Our studies show that the reaction proceeds through a rate-determining electrophilic C−O addition reaction followed by a 1,2-fluoride shift to give the ketone product, which can further rearrange to the phenol. A thermochemical analysis shows that the weakest C−F bond is the aliphatic C−F bond in the ketone intermediate. The oxidative defluorination of perfluoroaromatics is demonstrated to proceed through a completely different mechanism compared to that of aromatic C−H hydroxylation by iron(IV)-oxo intermediates such as cytochrome P450 Compound I.     

Diverse Reactivity of a Ca(I) Synthon

Low-valent Mg^I complexes like (BDI)Mg−Mg(BDI) have found wide-spread application as specialty reducing agents (BDI=β-diketiminate). Also their redox reactivity was extensively investigated. In contrast, attempts to isolate similar Ca^I complexes led to reduction of the aromatic solvents or N₂. Complex (^DIPePBDI)Ca(μ₆,μ₆-C₆H₆)Ca(^DIPePBDI) ( VIII ) should be regarded a Ca^II complex with a bridging C₆H₆²⁻ dianion (^DIPePBDI=HC[C(Me)N-DIPeP]₂, DIPeP=2,6-C(H)Et₂-phenyl). It can react as a Ca^I synthon by releasing benzene and two electrons. Herein we describe the reactivity of VIII with benzene, biphenyl, naphthalene, anthracene, COT, Ph₃SiCl, PhSiH₃, a (BDI)AlI₂ complex, H₂, PhX (X=F, Cl, Br, I), tBuOH and tBuCH₂I. The C₆H₆²⁻ dianion in VIII can react as a 2e⁻ source, a nucleophile or a Brønsted base. In some cases radical reactivity cannot be excluded. Crystal structures of (^DIPePBDI)Ca(μ₈,μ₈-COT)Ca(^DIPePBDI) ( 1 ) and [(^DIPePBDI)CaX ⋅ (THF)]₂ (X=F, Cl, Br, I) ( 2 – 5 ) are described.     

meta-Selective C−H Arylation of Fluoroarenes and Simple Arenes

Fluorine is known to promote ortho-C−H metalation. Based upon this reactivity, we employed an activated norbornene that traps the ortho-palladation intermediate and is then relayed to the meta position, leading to meta-selective C−H arylation of fluoroarenes. Deuterium experiment suggests that this meta-arylation is initiated by ortho C−H activation and the catalytic cycle is terminated by C-2 protonation. A dual-ligand system is crucial for the observed high reactivity and site selectivity. Applying this approach to simple benzene or other arenes also affords arylation products with good yield and site selectivity.     

C−H and C−M Activation,Aromaticity Tuning,and Co⋅⋅⋅Ru Interactions Confined in the Azuliporphyrin Framework

Taking advantage of the specific properties of azuliporphyrin and the reactivity of cobalt(II), activation of an azulene C(sp²)−H bond occurred and organometallic complexes with Co−C bonding were formed. The system allowed for macrocyclic aromaticity tuning through metal coordination and oxidation. Thanks to the Co^II−C and parallel tested Cu^II−C reactivity and the affinity of metal centers to dioxygen, oxygen atom insertion into the M−C bond could be investigated. Insertion starts with an oxygen molecule coordination and leads to monomeric and dimeric complexes of specific electronic structures. Formation of unique paramagnetic σ/π-hybrid bimetallic complexes enabled spectroscopic and theoretical investigations of peculiar Co^II⋅⋅⋅Ru⁰ interactions.     

Direct Aryl C−H Amination with Primary Amines Using Organic Photoredox Catalysis

The direct catalytic C−H amination of arenes is a powerful synthetic strategy with useful applications in pharmaceuticals, agrochemicals, and materials chemistry. Despite the advances in catalytic C−H functionalization, the use of aliphatic amine coupling partners is limited. Described herein is the construction of C−N bonds, using primary amines, by direct C−H functionalization with an acridinium photoredox catalyst under an aerobic atmosphere. A wide variety of primary amines, including amino acids and more complex amines are competent coupling partners. Various electron‐rich aromatics and heteroaromatics are useful scaffolds in this reaction, as are complex, biologically active arenes. We also describe the ability to functionalize arenes that are not oxidized by an acridinium catalyst, such as benzene and toluene, thus supporting a reactive amine cation radical intermediate.     

Rhodium(II)‐Catalyzed Nondirected Oxidative Alkenylation of Arenes: Arene Loading at One Equivalent

A bimetallic Rh^II catalyst promoted the C? H alkenylation of simple arenes at 1.0 equivalent without the use of a directing group. A phosphine ligand as well as cooperative reoxidation of Rh^II with Cu(TFA)₂ and V₂O₅ proved essential in providing monoalkenylated products in good yields and selectivities, especially with di‐ and trisubstituted arenes.     

Electrochemical C−H Amidation of Heteroarenes with N-Alkyl Sulfonamides in Aqueous Medium

The construction of C−N bonds by free radical reactions represents a powerful synthetic approach for direct C−H amidations of arenes or heteroarenes. Developing efficient and more environmentally friendly synthetic methods for C−H amidation reactions remains highly desirable. Herein, metal-free electrochemical oxidative dehydrogenative C−H amidations of heteroarenes with N-alkylsulfonamides have been accomplished. The catalyst- and chemical-oxidant-free C−H amidation features an ample scope and employs electricity as the green and sole oxidant. A variety of heteroarenes, including indoles, pyrroles, benzofuran and benzothiophene, thereby underwent this C(sp²)−H nitrogenation. Cyclic voltammetry studies and control experiments provided evidence for nitrogen-centered radicals being directly generated under metal-free electrocatalysis.     

Fast and Long-Lasting Iron(III) Reduction by Boron Toward Green and Accelerated Fenton Chemistry

Generation of hydroxyl radicals in the Fenton system (Fe^II/H₂O₂) is seriously limited by the sluggish kinetics of Fe^III reduction and fast Fe^III precipitation. Here, boron crystals (C-Boron) remarkably accelerate the Fe^III/Fe^II circulation in Fenton-like systems (C-Boron/Fe^III/H₂O₂) to produce a myriad of hydroxyl radicals with excellent efficiencies in oxidative degradation of various pollutants. The surface B−B bonds and interfacial suboxide boron in the surface B₁₂ icosahedra are the active sites to donate electrons to promote fast Fe^III reduction to Fe^II and further enhance hydroxyl radical production via Fenton chemistry. The C-Boron/Fe^III/H₂O₂ system outperforms the benchmark Fenton (Fe^II/H₂O₂) and Fe^III-based sulfate radical systems. The reactivity and stability of crystalline boron is much higher than the popular molecular reducing agents, nanocarbons, and other metal/metal-free nanomaterials.     

para-Selective Arylation of Arenes: A Direct Route to Biaryls by Norbornene Relay Palladation

Biaryl compounds are extremely important structural motifs in natural products, biologically active components and pharmaceuticals. Selective synthesis of biaryls by distinguishing the subtle reactivity difference of distal arene C−H bonds are significantly challenging. Herein, we describe para-selective C−H arylation, which is acheived by a unique combination of a meta-directing group and norbornene as a transient mediator. Upon direct meta-C−H palladation, one-bond relay palladation occurs in presence of norbornene and subsequently para-C−H arylation is achieved for sulfonates, phosphonates and phenols bearing 2,6-disubstitution patterns. The protocol is amenable to electron-deficient aryl iodides. Multisubstituted arenes and phenols are obtained by postsynthetic modification of the products. The protocol allows the synthesis of hexa-substituted benzene by sequential selective distal C−H functionalization.     

Identification of a Stable ZnII–Oxyl Species Produced in an MFI Zeolite and Its Reversible Reactivity with O2 at Room Temperature

Although a terminal oxyl species bound to certain metal ions is believed to be the intermediate for various oxidation reactions, such as O−O bond generation in photosystem II (PSII), such systems have not been characterized. Herein, we report a stable Zn^II–oxyl species induced by an MFI‐type zeolite lattice and its reversible reactivity with O₂ at room temperature. Its intriguing characteristics were confirmed by in situ spectroscopic studies in combination with quantum‐chemical calculations, namely analyses of the vibronic Franck–Condon progressions and the ESR signal features of both Zn^II–oxyl and Zn^II–ozonide species formed during this reversible process. Molecular orbital analyses revealed that the reversible reaction between a Zn^II–oxyl species and an O₂ molecule proceeds via a radical O–O coupling–decoupling mechanism; the unpaired electron of the oxyl species plays a pivotal role in the O−O bond generation process.     

The formyloxyl radical: electrophilicity,C–H bond activation and anti-Markovnikov selectivity in the oxidation of aliphatic alkenes

In the past the formyloxyl radical, HC(O)O˙, had only been rarely experimentally observed, and those studies were theoretical-spectroscopic in the context of electronic structure. The absence of a convenient method for the preparation of the formyloxyl radical has precluded investigations into its reactivity towards organic substrates. Very recently, we discovered that HC(O)O˙ is formed in the anodic electrochemical oxidation of formic acid/lithium formate. Using a [Co^IIIW₁₂O₄₀]⁵⁻ polyanion catalyst, this led to the formation of phenyl formate from benzene. Here, we present our studies into the reactivity of electrochemically in situ generated HC(O)O˙ with organic substrates. Reactions with benzene and a selection of substituted derivatives showed that HC(O)O˙ is mildly electrophilic according to both experimentally and computationally derived Hammett linear free energy relationships. The reactions of HC(O)O˙ with terminal alkenes significantly favor anti-Markovnikov oxidations yielding the corresponding aldehyde as the major product as well as further oxidation products. Analysis of plausible reaction pathways using 1-hexene as a representative substrate favored the likelihood of hydrogen abstraction from the allylic C–H bond forming a hexallyl radical followed by strongly preferred further attack of a second HC(O)O˙ radical at the C1 position. Further oxidation products are surmised to be mostly a result of two consecutive addition reactions of HC(O)O˙ to the C C double bond. An outer-sphere electron transfer between the formyloxyl radical donor and the [Co^IIIW₁₂O₄₀]⁵⁻ polyanion acceptor forming a donor–acceptor [D⁺–A⁻] complex is proposed to induce the observed anti-Markovnikov selectivity. Finally, the overall reactivity of HC(O)O˙ towards hydrogen abstraction was evaluated using additional substrates. Alkanes were only slightly reactive, while the reactions of alkylarenes showed that aromatic substitution on the ring competes with C–H bond activation at the benzylic position. C–H bonds with bond dissociation energies (BDE) ≤ 85 kcal mol⁻¹ are easily attacked by HC(O)O˙ and reactivity appears to be significant for C–H bonds with a BDE of up to 90 kcal mol⁻¹. In summary, this research identifies the reactivity of HC(O)O˙ towards radical electrophilic substitution of arenes, anti-Markovnikov type oxidation of terminal alkenes, and indirectly defines the activity of HC(O)O˙ towards C–H bond activation.

The formyloxyl radical, formed electrochemically, is electrophilic, yields anti-Markovnikov oxidation products from alkenes, and is effective for C–H bond activation.     

Radical C−H Trifluoromethoxylation of (Hetero)arenes with Bis(trifluoromethyl)peroxide

Trifluoromethoxylated (hetero)arenes are of great interest for several disciplines, especially in agro- and medicinal chemistry. Radical C−H trifluoromethoxylation of (hetero)arenes represents an attractive approach to prepare such compounds, but the high cost and low atom economy of existing ^. OCF₃ radical sources make them unsuitable for the large-scale synthesis of trifluoromethoxylated building blocks. Herein, we introduce bis(trifluoromethyl)peroxide (BTMP, CF₃OOCF₃) as a practical and efficient trifluoromethoxylating reagent that is easily accessible from inexpensive bulk chemicals. Using either visible light photoredox or TEMPO catalysis, trifluoromethoxylated arenes could be prepared in good yields under mild conditions directly from unactivated aromatics. Moreover, TEMPO catalysis allowed for the one-step synthesis of valuable pyridine derivatives, which have been previously prepared via multi-step approaches.