Heterogeneous 1H and 13C Parahydrogen-Induced Polarization of Acetate and Pyruvate Esters

Magnetic resonance imaging of [1-¹³C]hyperpolarized carboxylates (most notably, [1-¹³C]pyruvate) allows one to visualize abnormal metabolism in tumors and other pathologies. Herein, we investigate the efficiency of ¹H and ¹³C hyperpolarization of acetate and pyruvate esters with ethyl, propyl and allyl alcoholic moieties using heterogeneous hydrogenation of corresponding vinyl, allyl and propargyl precursors in isotopically unlabeled and 1-¹³C-enriched forms with parahydrogen over Rh/TiO₂ catalysts in methanol-d₄ and in D₂O. The maximum obtained ¹H polarization was 0.6±0.2 % (for propyl acetate in CD₃OD), while the highest ¹³C polarization was 0.10±0.03 % (for ethyl acetate in CD₃OD). Hyperpolarization of acetate esters surpassed that of pyruvates, while esters with a triple carbon-carbon bond in unsaturated alcoholic moiety were less efficient as parahydrogen-induced polarization precursors than esters with a double bond. Among the compounds studied, the maximum ¹H and ¹³C NMR signal intensities were observed for propyl acetate. Ethyl acetate yielded slightly less intense NMR signals which were dramatically greater than those of other esters under study.     

Hyperpolarized 13C Magnetic Resonance Imaging of Fumarate Metabolism by Parahydrogen-induced Polarization: A Proof-of-Concept in vivo Study

Hyperpolarized [1-¹³C]fumarate is a promising magnetic resonance imaging (MRI) biomarker for cellular necrosis, which plays an important role in various disease and cancerous pathological processes. To demonstrate the feasibility of MRI of [1-¹³C]fumarate metabolism using parahydrogen-induced polarization (PHIP), a low-cost alternative to dissolution dynamic nuclear polarization (dDNP), a cost-effective and high-yield synthetic pathway of hydrogenation precursor [1-¹³C]acetylenedicarboxylate (ADC) was developed. The trans-selectivity of the hydrogenation reaction of ADC using a ruthenium-based catalyst was elucidated employing density functional theory (DFT) simulations. A simple PHIP set-up was used to generate hyperpolarized [1-¹³C]fumarate at sufficient ¹³C polarization for ex vivo detection of hyperpolarized ¹³C malate metabolized from fumarate in murine liver tissue homogenates, and in vivo ¹³C MR spectroscopy and imaging in a murine model of acetaminophen-induced hepatitis.     

Order-Unity 13C Nuclear Polarization of [1-13C]Pyruvate in Seconds and the Interplay of Water and SABRE Enhancement

Signal Amplification By Reversible Exchange in SHield Enabled Alignment Transfer (SABRE-SHEATH) is investigated to achieve rapid hyperpolarization of ¹³C₁ spins of [1-¹³C]pyruvate, using parahydrogen as the source of nuclear spin order. Pyruvate exchange with an iridium polarization transfer complex can be modulated via a sensitive interplay between temperature and co-ligation of DMSO and H₂O. Order-unity ¹³C (>50 %) polarization of catalyst-bound [1-¹³C]pyruvate is achieved in less than 30 s by restricting the chemical exchange of [1-¹³C]pyruvate at lower temperatures. On the catalyst bound pyruvate, 39 % polarization is measured using a 1.4 T NMR spectrometer, and extrapolated to >50 % at the end of build-up in situ. The highest measured polarization of a 30-mM pyruvate sample, including free and bound pyruvate is 13 % when using 20 mM DMSO and 0.5 M water in CD₃OD. Efficient ¹³C polarization is also enabled by favorable relaxation dynamics in sub-microtesla magnetic fields, as indicated by fast polarization buildup rates compared to the T₁ spin-relaxation rates (e. g., ∼0.2 s⁻¹ versus ∼0.1 s⁻¹, respectively, for a 6 mM catalyst-[1-¹³C]pyruvate sample). Finally, the catalyst-bound hyperpolarized [1-¹³C]pyruvate can be released rapidly by cycling the temperature and/or by optimizing the amount of water, paving the way to future biomedical applications of hyperpolarized [1-¹³C]pyruvate produced via comparatively fast and simple SABRE-SHEATH-based approaches.     

Efficient Synthesis of Molecular Precursors for Para‐Hydrogen‐Induced Polarization of Ethyl Acetate‐1‐13C and Beyond

A scalable and versatile methodology for production of vinylated carboxylic compounds with ¹³C isotopic label in C1 position is described. It allowed synthesis of vinyl acetate‐1‐¹³C, which is a precursor for preparation of ¹³C hyperpolarized ethyl acetate‐1‐¹³C, which provides a convenient vehicle for potential in vivo delivery of hyperpolarized acetate to probe metabolism in living organisms. Kinetics of vinyl acetate molecular hydrogenation and polarization transfer from para‐hydrogen to ¹³C via magnetic field cycling were investigated. Nascent proton nuclear spin polarization (%P_H) of ca. 3.3 % and carbon‐13 polarization (%P_13C) of ca. 1.8 % were achieved in ethyl acetate utilizing 50 % para‐hydrogen corresponding to ca. 50 % polarization transfer efficiency. The use of nearly 100% para‐hydrogen and the improvements of %P_H of para‐hydrogen‐nascent protons may enable production of ¹³C hyperpolarized contrast agents with %P_13C of 20–50 % in seconds using this chemistry.     

Production of Pure Aqueous 13C‐Hyperpolarized Acetate by Heterogeneous Parahydrogen‐Induced Polarization

A supported metal catalyst was designed, characterized, and tested for aqueous phase heterogeneous hydrogenation of vinyl acetate with parahydrogen to produce ¹³C‐hyperpolarized ethyl acetate for potential biomedical applications. The Rh/TiO₂ catalyst with a metal loading of 23.2 wt % produced strongly hyperpolarized ¹³C‐enriched ethyl acetate‐1‐¹³C detected at 9.4 T. An approximately 14‐fold ¹³C signal enhancement was detected using circa 50 % parahydrogen gas without taking into account relaxation losses before and after polarization transfer by magnetic field cycling from nascent parahydrogen‐derived protons to ¹³C nuclei. This first observation of ¹³C PHIP‐hyperpolarized products over a supported metal catalyst in an aqueous medium opens up new possibilities for production of catalyst‐free aqueous solutions of nontoxic hyperpolarized contrast agents for a wide range of biomolecules amenable to the parahydrogen induced polarization by side arm hydrogenation (PHIP‐SAH) approach.     

Détermination par RMN 1H et 13C des Couplages J(CH) et J(CC) dans des Monomères Precurseurs de Lignine: Vanilline,Férulate d'Ethyle et Alcool Coniférylique Sélectivement Enrichis en 2H et 13C

Some monomer model compounds of lignin have been selectively ²H and ¹³C labelled: vanillin, ethyl ferulate, coniferyl alcohol and ethyl hydrogen malonate. Deuterium isotope effects on the ¹³C chemical shifts in [formyl-²H]vanillin, [5-²H]vanillin and [α,α,5-²H₃]coniferyl alcohol made the unambiguous assignment of the aromatic ¹³C signals possible. Absolute ^1,2,3J(CC) values have been determined on ¹³C spectra of [formyl-¹³C]vanillin, and of ethyl ferulate and coniferyl alcohol in which the vinylic C-γ and C-β carbons were ¹³C enriched. It has been possible to measure ⁴J(C?O, C-4) in vanillin and ⁴J(C-γ, C-4) in ethyl ferulate. The determination of ^1,2,3,4J (CH) absolute values was done by means of gated decoupled ¹³C spectra of the non-labelled compounds. When second order effects made the use of this technique impossible we determined certain J(CH) values and their signs either by analysing the ¹H NMR spectra of ¹³C labelled coniferyl alcohol [²J(C-β, H-γ), ²J(C-β, H-α), ²J(C-γ, H-β), ³J(C-γ, H-α)] or by a double irradiation experiment on the 250 MHz ¹H NMR spectrum of ethyl [β-¹³C] ferulate [for ²J(C-β, H-γ)].     

ParaHydrogen Polarized Ethyl-[1-13C]pyruvate in Water,a Key Substrate for Fostering the PHIP-SAH Approach to Metabolic Imaging

An efficient synthesis of vinyl-[1-¹³C]pyruvate has been reported, from which ¹³C hyperpolarized (HP) ethyl-[1-¹³C]pyruvate has been obtained by means of ParaHydrogen Induced Polarization (PHIP). Due to the intrinsic lability of pyruvate, which leads quickly to degradation of the reaction mixture even under mild reaction conditions, the vinyl-ester has been synthesized through the intermediacy of a more stable ketal derivative. ¹³C and ¹H hyperpolarizations of ethyl-[1-¹³C]pyruvate, hydrogenated using ParaHydrogen, have been compared to those observed on the more widely used allyl-derivative. It has been demonstrated that the spin order transfer from ParaHydrogen protons to ¹³C, is more efficient on the ethyl than on the allyl-esterdue to the larger J-couplings involved. The main requirements needed for the biological application of this HP product have been met, i. e. an aqueous solution of the product at high concentration (40 mM) with a good ¹³C polarization level (4.8 %) has been obtained. The in vitro metabolic transformation of the HP ethyl-[1-¹³C]pyruvate, catalyzed by an esterase, has been observed. This substrate appears to be a good candidate for in vivo metabolic investigations using PHIP hyperpolarized probes.     

Parahydrogen-Induced Polarization of Diethyl Ether Anesthetic

The growing interest in magnetic resonance imaging (MRI) for assessing regional lung function relies on the use of nuclear spin hyperpolarized gas as a contrast agent. The long gas-phase lifetimes of hyperpolarized ¹²⁹Xe make this inhalable contrast agent acceptable for clinical research today despite limitations such as high cost, low throughput of production and challenges of ¹²⁹Xe imaging on clinical MRI scanners, which are normally equipped with proton detection only. We report on low-cost and high-throughput preparation of proton-hyperpolarized diethyl ether, which can be potentially employed for pulmonary imaging with a nontoxic, simple, and sensitive overall strategy using proton detection commonly available on all clinical MRI scanners. Diethyl ether is hyperpolarized by pairwise parahydrogen addition to vinyl ethyl ether and characterized by ¹H NMR spectroscopy. Proton polarization levels exceeding 8 % are achieved at near complete chemical conversion within seconds, causing the activation of radio amplification by stimulated emission radiation (RASER) throughout detection. Although gas-phase T₁ relaxation of hyperpolarized diethyl ether (at partial pressure of 0.5 bar) is very efficient, with T₁ of ca. 1.2 second, we demonstrate that, at low magnetic fields, the use of long-lived singlet states created via pairwise parahydrogen addition extends the relaxation decay by approximately threefold, paving the way to bioimaging applications and beyond.     

Biosynthesis of cytochalasans. Part 4. The mode of incorporation of common naturally-occurring carboxylic acids into cytochalasin D1.

Utilization of sodium [1-¹⁴C]-, [2–¹⁴C]-, and [1,2-¹³C]-acetates, [1-¹⁴C]-, [1-¹³C]-, or [2-¹⁴C]-propionates, [1-¹⁴C]-or [2-¹⁴C]-malonates, of [1-¹⁴C]- or of [1-¹⁴C]-myristic acid, or of [1-¹⁴C]- and [1-¹⁴C]-palmitic acid in the biosynthesis of cytochalasin D ( 1 ) by Zygosporium masonii was determined by degradation studies or by carbon magnetic resonance spectroscopy. The precursors were incorporated primarily via the acetate-malonate pathway to generate 1 from nine intact acetate units, eight of which are coupled in a head to tail fashion to form the C₁₆-polyketide moiety.     

Parahydrogen‐Induced Radio Amplification by Stimulated Emission of Radiation

Radio amplification by stimulated emission of radiation (RASER) was recently discovered in a low‐field NMR spectrometer incorporating a highly specialized radio‐frequency resonator, where a high degree of proton‐spin polarization was achieved by reversible parahydrogen exchange. RASER activity, which results from the coherent coupling between the nuclear spins and the inductive detector, can overcome the limits of frequency resolution in NMR. Here we show that this phenomenon is not limited to low magnetic fields or the use of resonators with high‐quality factors. We use a commercial bench‐top 1.4 T NMR spectrometer in conjunction with pairwise parahydrogen addition producing proton‐hyperpolarized molecules in the Earth's magnetic field (ALTADENA condition) or in a high magnetic field (PASADENA condition) to induce RASER without any radio‐frequency excitation pulses. The results demonstrate that RASER activity can be observed on virtually any NMR spectrometer and measures most of the important NMR parameters with high precision.     

Amino Acid-Derived Sensors for Specific Zn2+ Detection Using Hyperpolarized 13C Magnetic Resonance Spectroscopy

Alterations in Zn²⁺ concentration are seen in normal tissues and in disease states, and for this reason imaging of Zn²⁺ is an area of active investigation. Herein, enriched [1-¹³C]cysteine and [1-¹³C₂]iminodiacetic acid were developed as Zn²⁺-specific imaging probes using hyperpolarized ¹³C magnetic resonance spectroscopy. [1-¹³C]cysteine was used to accurately quantify Zn²⁺ in complex biological mixtures. These sensors can be employed to detect Zn²⁺ via imaging mechanisms including changes in ¹³C chemical shift, resonance linewidth, or T₁.     

The Steady-State ALTADENA RASER Generates Continuous NMR Signals**

A RASER (Radio Amplification by Stimulated Emission of Radiation) facilitates the study of nonlinear phenomena, as well as the determination of NMR parameters with high precision. To achieve maximum sensitivity in the desired operating mode, it is crucial to control the RASER over long periods of time. So far, this was only possible at ultra-low magnetic fields. Here, we introduce a way to control the operating regime of a RASER at a magnetic field of 1.45 T. We employ a continuous-flow RASER, pumped by PHIP (ParaHydrogen Induced Polarization). The hydrogenation of vinyl acetate (VA) with parahydrogen provides the required negative polarization on the methyl group of the product ethyl acetate (EA). The protons within the methyl group, separated by a 7 Hz J-coupling, are RASER active. This system demonstrates five RASER phenomena: inequivalent and equivalent amplitudes in the “normal NMR mode”, period doublings, frequency combs, and chaos. The experiments match with simulations based on a theoretical model of two nonlinear-coupled RASER modes. We predict the RASER regime at set conditions and visualize the prediction in a bifurcation diagram.     

Quantitative evaluation of the biosynthetic pathways leading to δ-aminolevulinic acid from the Shemin precursor glycine via the C5 pathway in Arthrobacter hyalinus by analysis of 13C-labeled coproporphyrinogen III biosynthesized from [2-13C]glycine, [1-13C]acetate, and [2-13C]acetate using 13C NMR spectroscopy

The biosynthetic pathways leading to δ-aminolevulinic acid (ALA) from the Shemin precursor glycine via the C5 pathway in Arthrobacter hyalinus were quantitatively evaluated by means of feeding experiments with [2-¹³C]glycine, sodium [1-¹³C]acetate, and sodium [2-¹³C]acetate, followed by analysis of the labeling patterns of coproporphyrinogen III (Copro’gen III) (biosynthesized from ALA) using ¹³C NMR spectroscopy. Two biosynthetic pathways leading to ALA from glycine via the C5 pathway were identified: i.e., transformation of glycine to l-serine catalyzed by glycine hydroxymethyltransferase, and glycine synthase-catalyzed catabolism of glycine to N ⁵,N ¹⁰-methylene-tetrahydrofolic acid (THF), which reacts with another molecule of glycine to afford l-serine. l-Serine is transformed to acetyl-CoA via pyruvic acid. Acetyl-CoA enters the tricarboxylic acid cycle, affording 2-oxoglutaric acid, which in turn is transformed to l-glutamic acid. The l-glutamic acid enters the C5 pathway, affording ALA in A. hyalinus. A ¹³C NMR spectroscopic comparison of the labeling patterns of Copro’gen III obtained after feeding of [2-¹³C]glycine, sodium [1-¹³C]acetate, and sodium [2-¹³C]acetate showed that [2-¹³C]glycine transformation and [2-¹³C]glycine catabolism in A. hyalinus proceed in the ratio of 52 and 48 %. The reaction of [2-¹³C]glycine and N ⁵,N ¹⁰-methylene-THF, that of glycine and N ⁵,N ¹⁰-[methylene-¹³C]methylene-THF generated from the [2-¹³C]glycine catabolism, and that of [2-¹³C]glycine and N ⁵,N ¹⁰-[methylene-¹³C]methylene-THF transformed the fed [2-¹³C]glycine to [1-¹³C]acetyl-CoA, [2-¹³C]acetyl-CoA, and [1,2-¹³C₂]acetyl-CoA in the ratios of 42, 37, and 21 %, respectively. These labeled acetyl-CoAs were then incorporated into ALA. Our results provide a quantitative picture of the pathways of biosynthetic transformation to ALA from glycine in A. hyalinus.     

Real‐Time Interrogation of Aspirin Reactivity,Biochemistry, and Biodistribution by Hyperpolarized Magnetic Resonance Spectroscopy

Hyperpolarized magnetic resonance spectroscopy enables quantitative, non‐radioactive, real‐time measurement of imaging probe biodistribution and metabolism in vivo. Here, we investigate and report on the development and characterization of hyperpolarized acetylsalicylic acid (aspirin) and its use as a nuclear magnetic resonance (NMR) probe. Aspirin derivatives were synthesized with single‐ and double‐¹³C labels and hyperpolarized by dynamic nuclear polarization with 4.7 % and 3 % polarization, respectively. The longitudinal relaxation constants (T₁) for the labeled acetyl and carboxyl carbonyls were approximately 30 seconds, supporting in vivo imaging and spectroscopy applications. In vitro hydrolysis, transacetylation, and albumin binding of hyperpolarized aspirin were readily monitored in real time by ¹³C‐NMR spectroscopy. Hyperpolarized, double‐labeled aspirin was well tolerated in mice and could be observed by both ¹³C‐MR imaging and ¹³C‐NMR spectroscopy in vivo.     

Real‐Time Interrogation of Aspirin Reactivity,Biochemistry, and Biodistribution by Hyperpolarized Magnetic Resonance Spectroscopy

Hyperpolarized magnetic resonance spectroscopy enables quantitative, non‐radioactive, real‐time measurement of imaging probe biodistribution and metabolism in vivo. Here, we investigate and report on the development and characterization of hyperpolarized acetylsalicylic acid (aspirin) and its use as a nuclear magnetic resonance (NMR) probe. Aspirin derivatives were synthesized with single‐ and double‐¹³C labels and hyperpolarized by dynamic nuclear polarization with 4.7 % and 3 % polarization, respectively. The longitudinal relaxation constants (T₁) for the labeled acetyl and carboxyl carbonyls were approximately 30 seconds, supporting in vivo imaging and spectroscopy applications. In vitro hydrolysis, transacetylation, and albumin binding of hyperpolarized aspirin were readily monitored in real time by ¹³C‐NMR spectroscopy. Hyperpolarized, double‐labeled aspirin was well tolerated in mice and could be observed by both ¹³C‐MR imaging and ¹³C‐NMR spectroscopy in vivo.     

Construction and 13C hyperpolarization efficiency of a 180 GHz dissolution dynamic nuclear polarization system

Dynamic nuclear polarization (DNP) via the dissolution method has become one of the rapidly emerging techniques to alleviate the low signal sensitivity in nuclear magnetic resonance (NMR) spectroscopy and imaging. In this paper, we report on the development and ¹³C hyperpolarization efficiency of a homebuilt DNP system operating at 6.423 T and 1.4 K. The DNP hyperpolarizer system was assembled on a wide‐bore superconducting magnet, equipped with a standard continuous‐flow cryostat, and a 180 GHz microwave source with 120 mW power output and wide 4 GHz frequency tuning range. At 6.423 T and 1.4 K, solid‐state ¹³C polarization P levels of 64% and 31% were achieved for 3 M [1‐¹³C] sodium acetate samples in 1 : 1 v/v glycerol:water glassing matrix doped with 15 mM trityl OX063 and 40 mM 4‐oxo‐TEMPO, respectively. Upon dissolution, which takes about 15 s to complete, liquid‐state ¹³C NMR signal enhancements as high as 240 000‐fold (P=21%) were recorded in a nearby high resolution ¹³C NMR spectrometer at 1 T and 297 K. Considering the relatively lower cost of our homebuilt DNP system and the relative simplicity of its design, the dissolution DNP setup reported here could be feasibly adapted for in vitro or in vivo hyperpolarized ¹³C NMR or magnetic resonance imaging at least in the pre‐clinical setting. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis of [1-15N,2-13C]-labeled difloxacin

Abstract  

The synthesis of [1-¹⁵N,2-¹³C]-difloxacin, an arylfluoroquinolone antibacterial agent, is reported. As a crucial initial step, the starting materials ethyl 2,4,5-trifluorobenzoylacetate, [formyl-¹³C]-triethyl orthoformate, and [¹⁵N]-4-fluoroaniline were reacted to ethyl [¹⁵N,3-¹³C]-3-(4-fluoroanilino)-2-(2,4,5-trifluorobenzoyl)acrylate. After cyclization and ester cleavage, the resulting intermediate was reacted with 1-methylpiperazine to [1-¹⁵N,2-¹³C]-1-(4-fluorophenyl)-6-fluoro-7-(4-methyl-1-piperazinyl)-1,4-dihydro-4-oxoquinoline-3-carboxylate, i.e., [1-¹⁵N,2-¹³C]-difloxacin. The overall yield was 62% based on the non-labeled and 43% based on the labeled starting materials (both used in 1.4 molar excess). The product was identified by ¹H-, ¹³C-, and ¹⁵N-NMR spectroscopy and by cochromatography (TLC, HPLC) with an authentic reference; its purity (HPLC) was above 98%. Prior to synthesis of [1-¹⁵N,2-¹³C]-difloxacin, non-labeled difloxacin was synthesized in order to optimize procedures and to identify and characterize all intermediates.     

Biosynthesis of the Cytochalasans. Biosynthetic studies on chaetoglobosin A and 19-O-acetylchaetoglobosin A

Incorporation of [1-¹³C]-, [2-¹³C]- and [1,2-¹³C₂]-acetate, [1-¹³C]-propionate, [¹³C-CH₃]-L -methionine and [3-¹⁴C]-DL -tryptophan into chaetoglobosin A ( 1 ) and 19-O-acetylchaetoglobosin A ( 2 ) by Chaetomium globosum demonstrated that the building blocks of 1 and 2 are 9 and 10 units of acetate/malonate respectively, 3 units of methionine and 1 unit of tryptophan. Propionate is incorporated indirectly after several biological transformations. Using [2-¹³C, 2-²H₃]-acetate as precursor, the starter unit of the polyketide-chain was identified. Experiments which [¹³C, ²H₃-CH₃-L -methionine demonstrated that the three C-methylations occur with retention of all three H-atoms of the methyl group. Incorporation experiments with various ¹⁴C- and ³H-labelled tryphtophan samples and with [2-²H]- and [2-¹⁵N]-L -tryptophan showed that the amino acid is incorporated intact with retention of both the α-H- and the α-N-atom. On the basis of these results a more detailed general scheme of the cytochalasan biogenesis is proposed.     

Biosynthetic pathway of macrolactam polyketide antibiotic cremimycin

Biosynthetic origin of macrolactam polyketide antibiotic cremimycin was investigated by feeding experiments with [1-¹³C]acetate, [1,2-¹³C₂]acetate, [1-¹³C]propionate, succinate-d₄, and d-[6,6-²H₂]glucose. NMR analysis of the resultant isotope-enriched cremimycins showed distinctive incorporation patterns, which suggested that the aglycon of cremimycin was constructed from two propionates and eleven acetates. Thus, 3-oxononanoate was proposed as a potential polyketide intermediate, that is, aminated to be the unique nitrogen-containing moiety of cremymicin. Further, characteristic propionate biosynthetic pathway in the cremimycin-producing strain was also described.     

Maillard Reaction: Investigation of the Chemical Structure of Melanoioins Synthesized from D-Xylose and Glycine Using 13C and 15N Specifically Labeled Reactants

Abstract

Melanoldins were Isolated 1n 36% yield w/w from molar solution of D-xylose and glydne-2-¹³C (A); D-xylose and glycine-l-¹³C (B); D-xylose-1-¹³C and glydne (C); D-xylose and glyclne (D); D-xylose and glycine-¹⁵N (E). Each solutTon was kept at 68[ddot]C until complete disappearance of xylose as evidenced by NMR. ¹³C and ¹⁵N solid state nuclear magnetic resonance and diffuse reflectance Infrared spectrometry were used in their structural elucidation before and after basic and add hydrolysis. Both C-1 and C-2 of glycine were Incorporated Into the polymers. In the ¹³C CP-MAS NMR spectra, C-1 gave a single peak in the polymer at 171.3 ppm, while C-2 gave three at 48.1, 31.2 and 22.5 ppm. Area measurements of the respective peaks Indicated that 50% of the Incorporated glycine had undergone decarboxylatlon. C-1 of xylose was Incorporated into the polymers mainly as two types of carbons at 68.8 ppm (CHOH, C-OH) and at 133.3 ppm (unsaturated C). Hydrolysis (6N HC1) led to a 20% reduction 1n weight of the melanoldlns, a decrease of 2% in C and 10% in N. ¹³C CP-MAS NMR revealed after hydrolysis of D, the disappearance of signals at 69, 110, 152, 172 and 200 ppm. Hydrolysis of A and B reduced all signals originating from C-1 and C-2 of glydne, while hydrolysis of C reduced only the signal of 68.8 ppm. ¹⁵N CP-MAS NMR of hydrolyzed E showed a greatly reduced amide resonance at 100 ppm, with more pyrrole or imino N. DR-IR showed a reduction 1n both the 1625 and 1550 cm^-1 bands with a concurrent appearance of a 1715 cm^-1 band.