Post-synthetic Modification of Covalent Organic Frameworks through in situ Polymerization of Aniline for Enhanced Capacitive Energy Storage

Covalent organic frameworks (COFs) having layered architecture with open nanochannels and high specific surface area are promising candidates for energy storage. However, the low electrical conductivity of two-dimensional COFs often limits their scope in energy storage applications. The conductivity of COFs can be enhanced through post-synthetic modification with conducting polymers. Herein, we developed polyaniline (PANI) modified triazine-based COFs via in situ polymerization of aniline within the porous frameworks. The composite materials showed high conductivity of 1.4–1.9×10⁻² S cm⁻¹ at room temperature with a 20-fold enhancement of the specific capacitance than the pristine frameworks. The fabricated supercapacitor exhibited a high energy density of 24.4 W h kg⁻¹ and a power density of 200 W kg⁻¹ at 0.5 A g⁻¹ current density. Moreover, the device fabricated using the conducting polymer-triazine COF composite could light up a green light-emitting diode for 1 min after being charged for 10 s.     

Metal-Organic Frameworks as Unique Platforms to Gain Insight of σ-Hole Interactions for the Removal of Organic Dyes from Aquatic Ecosystems

The combination of high crystallinity and rich host-guest chemistry in metal-organic frameworks (MOFs), have situated them in an advantageous position, with respect to traditional porous materials, to gain insight on specific weak noncovalent supramolecular interactions. In particular, sulfur σ-hole interactions are known to play a key role in the biological activity of living beings as well as on relevant molecular recognitions processes. However, so far, they have been barely explored. Here, we describe both how the combination of the intrinsic features of MOFs, especially the possibility of using single-crystal X-ray crystallography (SCXRD), can be an extremely valuable tool to gain insight on sulfur σ-hole interactions, and how their rational exploitation can be enormously useful in the efficient removal of harmful organic molecules from aquatic ecosystems. Thus, we have used a MOF, prepared from the amino acid L-methionine and possessing channels decorated with −CH₂CH₂SCH₃ thioalkyl chains, to remove a family of organic dyes at very low concentrations (10 ppm) from water. This MOF is able to efficiently capture the four dyes in a very fast manner, reaching within five minutes nearly the maximum removal. Remarkably, the crystal structure of the different organic dyes within MOFs channels could be determined by SCXRD. This has enabled us to directly visualize the important role sulfur σ-hole interactions play on the removal of organic dyes from aqueous solutions, representing one of the first studies on the rational exploitation of σ-hole interactions for water remediation.     

Fast and Selective Semihydrogenation of Alkynes by Palladium Nanoparticles Sandwiched in Metal–Organic Frameworks

The semihydrogenation of alkynes into alkenes rather than alkanes is of great importance in the chemical industry. Unfortunately, state-of-the-art heterogeneous catalysts hardly achieve high turnover frequencies (TOFs) simultaneously with almost full conversion, excellent selectivity, and good stability. Here, we used metal–organic frameworks (MOFs) containing Zr metal nodes (“UiO”) with tunable wettability and electron-withdrawing ability as activity accelerators for the semihydrogenation of alkynes catalyzed by sandwiched palladium nanoparticles (Pd NPs). Impressively, the porous hydrophobic UiO support not only leads to an enrichment of phenylacetylene around the Pd NPs but also renders the Pd surfaces more electron-deficient, which leads to a remarkable catalysis performance, including an exceptionally high TOF of 13835 h⁻¹, 100 % phenylacetylene conversion 93.1 % selectivity towards styrene, and no activity decay after successive catalytic cycles. The strategy of using molecularly tailored supports is universal for boosting the selective semihydrogenation of various terminal and internal alkynes.     

Evaluation of Pd→B Interactions in Diphosphinoborane Complexes and Impact on Inner-Sphere Reductive Elimination

The dative Pd→B interaction in a series of ^RDPB^R’ Pd⁰ and Pd^II complexes (^RDPB^R’=(o-PR₂C₆H₄)₂BR’, diphosphinoborane) was analyzed using XRD, ¹¹B NMR spectroscopy and NBO/NLMO calculations. The borane acceptor discriminates between the oxidation state Pd^II and Pd⁰, stabilizing the latter. Reaction of lithium amides with [(^RDPB^R’)Pd^II(4-NO₂C₆H₄)I] chemoselectively yields the C−N coupling product. DFT modelling indicates no significant impact of Pd^II→B coordination on the inner-sphere reductive elimination rate.     

Effect of the Size of Polyacrylamide-Stabilized Palladium Nanoparticles Supported on γ-Fe2O3 on Their Catalytic Properties in the Hydrogenation of Phenylacetylene

Theoretical and Experimental Chemistry - Hydrogenation catalysts derived from palladium nanoparticles varying in size supported on maghemite (γ-Fe2O3) were obtained by varying the...     

Effect of the State of a Surface Layer on the Properties of Pd–P Catalysts in the Hydrogenation of Alkylanthraquinones

Kinetics and Catalysis - X-ray photoelectron spectroscopy (XPS) was used to study the state of the surface layer of a Pd–P catalyst, which exhibits high selectivity in the hydrogenation of...     

BN-Doped Metal–Organic Frameworks: Tailoring 2D and 3D Porous Architectures through Molecular Editing of Borazines

Building on the MOF approach to prepare porous materials, herein we report the engineering of porous BN-doped materials using tricarboxylic hexaarylborazine ligands, which are laterally decorated with functional groups at the full-carbon ‘inner shell’. Whilst an open porous 3D entangled structure could be obtained from the double interpenetration of two identical metal frameworks derived from the methyl substituted borazine, the chlorine-functionalised linker undergoes formation of a porous layered 2D honeycomb structure, as shown by single-crystal X-ray diffraction analysis. In this architecture, the borazine cores are rotated by 60° in alternating layers, thus generating large rhombohedral channels running perpendicular to the planes of the networks. An analogous unsubstituted full-carbon metal framework was synthesised for comparison. The resulting MOF revealed a crystalline 3D entangled porous structure, composed by three mutually interpenetrating networks, hence denser than those obtained from the borazine linkers. Their microporosity and CO₂ uptake were investigated, with the porous 3D BN-MOF entangled structure exhibiting a large apparent BET specific surface area (1091 m² g⁻¹) and significant CO₂ reversible adsorption (3.31 mmol g⁻¹) at 1 bar and 273 K.     

Metal–Organic Framework-Encapsulated CoCu Nanoparticles for the Selective Transfer Hydrogenation of Nitrobenzaldehydes: Engineering Active Armor by the Half-Way Injection Method

A novel armor-type composite of metal–organic framework (MOF)-encapsulated CoCu nanoparticles with a Fe₃O₄ core (Fe₃O₄@SiO₂-NH₂-CoCu@UiO-66) has been designed and synthesized by the half-way injection method, which successfully serves as an efficient and recyclable catalyst for the selective transfer hydrogenation. In this half-way injection approach, the pre-synthetic Fe₃O₄@SiO₂-NH₂-CoCu was injected into the UiO-66 precursor solution halfway through the MOF budding period. The formed MOF armor could play a role of providing significant additional catalytic sites besides CoCu nanoparticles, protecting CoCu nanoparticles, and improving the catalyst stability, thus facilitating the selective transfer hydrogenation of nitrobenzaldehydes into corresponding nitrobenzyl alcohols in high selectivity (99 %) and conversion (99 %) rather than nitro group reduction products. Notably, this method achieves the precise assembly of a MOF-encapsulated composite, and the ingenious combination of MOF and nanoparticles exhibits excellent catalytic performance in the selective hydrogen transfer reaction, implementing a “1+1>2” strategy in catalysis.     

Influence of Molecular Separation on Through-Space Intervalence Transient Charge Transfer in Metal–Organic Frameworks with Cofacially arranged Redox Pairs

We demonstrate direct evidence of photoinduced through-space intervalence charge transfer (IVCT) between two cofacially arranged redox-active pairs in metal–organic frameworks and their dynamic variation with their molecular separation. Two homologous MOFs [Co₂(NDC)₂(DPTTZ)₂]. DPTTZ. DMF, 1 and [Co₂(BDC)₂(DPTTZ)₂]. DMF, 2 (where NDC=naphthalene dicarboxylate, BDC=benzene dicarboxylate, DPTTZ=N, N′-di(4-pyridyl)thiazolo-[5,4-d]thiazole, DMF=N, N′-dimethyl formamide) are considered for this, whose intra-dimer distance of redox-active DPTTZ ligands differs ca. 1 Å from one system to another. Spectroelectrochemical study detects the formation of IVCT band at the NIR region between cofacially oriented DPTTZ molecules in both MOFs. Transient spectroscopy shows faster charge separation as well as charge recombination when intra-dimer distance is lesser (in MOF 2 ) due to stronger electronic coupling. We quantify the extent of IVCT by charge transfer integral calculation; and also by optical pump terahertz probe spectroscopy, where MOF 2 shows three times higher carrier mobility due to lesser inter-DPTTZ distance than MOF 1 . These findings reveal a more localized aspect of through-space IVCT between cofacially organized redox-active pair in a three-dimensional framework.     

Facile Grafting of Silver Nanoparticles into Copper and Guanosine 5′-Monophosphate Metal Organic Frameworks (AgNPs@Cu/GMP): Characterization and Antimicrobial Activity

Journal of Cluster Science - Silver nanoparticles (AgNPs) are effective antibacterial agent but lack of stability and rapid aggregation limits their antibacterial efficiency in biomedical...     

Fabrication of Microporous Metal–Organic Frameworks in Uninterrupted Mesoporous Tunnels: Hierarchical Structure for Efficient Trypsin Immobilization and Stabilization

Hierarchically porous metal–organic frameworks (HP-MOFs) are promising in various applications. Most reported HP-MOFs are prepared based on the generation of mesopores in microporous frameworks, and the formed mesopores are connected by microporous channels, limiting the accessibility of mesopores for bulky molecules. A hierarchical structure is formed by constructing microporous MOFs in uninterrupted mesoporous tunnels. Using the confined space in as-prepared mesoporous silica, highly dispersed metal precursors for MOFs are coated on the internal surface of mesoporous tunnels. Ligand vapor-induced crystallization is employed to enable quantitative formation of MOFs in situ, in which sublimated ligands diffuse into mesoporous tunnels and react with metal precursors. The obtained hierarchically porous composites exhibit record-high adsorption capacity for the bulky molecule trypsin. The thermal and storage stability of trypsin is improved upon immobilization on the composites.     

Solvent Impact on the Properties of Benchmark Metal–Organic Frameworks: Acetonitrile-Based Synthesis of CAU-10, Ce-UiO-66, and Al-MIL-53

Herein is reported the utilization of acetonitrile as a new solvent for the synthesis of the three significantly different benchmark metal–organic frameworks (MOFs) CAU-10, Ce-UiO-66, and Al-MIL-53 of idealized composition [Al(OH)(ISO)], [Ce₆O₄(OH)₄(BDC)₆], and [Al(OH)(BDC)], respectively (ISO²⁻: isophthalate, BDC²⁻: terephthalate). Its use allowed the synthesis of Ce-UiO-66 on a gram scale. While CAU-10 and Ce-UiO-66 exhibit properties similar to those reported elsewhere for these two materials, the obtained Al-MIL-53 shows no structural flexibility upon adsorption of hydrophilic or hydrophobic guest molecules such as water and xenon and is stabilized in its large-pore form over a broad temperature range (130–450 K). The stabilization of the large-pore form of Al-MIL-53 was attributed to a high percentage of noncoordinating −COOH groups as determined by solid-state NMR spectroscopy. The defective material shows an unusually high water uptake of 310 mg g⁻¹ within the range of 0.45 to 0.65 p/p°. In spite of showing no breathing effect upon water adsorption it exhibits distinct mechanical properties. Thus, mercury intrusion porosimetry studies revealed that the solid can be reversibly forced to breathe by applying moderate pressures (≈60 MPa).     

Platinum-Supported Zirconia Nanotube Arrays Supported on Graphene Aerogels Modified with Metal–Organic Frameworks: Adsorption and Oxidation of Formaldehyde at Room Temperature

Precious-metal catalysts (e.g., Au, Rh, Ag, Ru, Pt, and Pd) supported on transition-metal oxides (e.g., Al₂O₃, Fe₂O₃, CeO₂, ZrO₂, Co₃O₄, MnO₂, TiO₂, and NiO) can effectively oxidize volatile organic compounds. In this study, porous platinum-supported zirconia materials have been prepared by a “surface-casting” method. The synthesized catalysts present an ordered nanotube structure and exhibited excellent performance toward the catalytic oxidation of formaldehyde. A facile method, utilizing a boiling water bath, was used to fabricate graphene aerogel (GA), and the macroscopic 3D Pt/ZrO₂-GA was modified by introducing an adjustable MOF coating by a surface step-by-step method. The unblocked mesoporous structure of the graphene aerogel facilitates the ingress and egress of reactants and product molecules. The selected 7 wt.% Pt/ZrO₂-GA-MOF-5 composite demonstrated excellent performance for HCHO adsorption. Additionally, this catalyst achieved around 90 % conversion when subjected to a reaction temperature of 70 °C (T_{90 %}=70 °C). The Pt/ZrO₂-GA-MOF-5 composite induces a catalytic cycle, increasing the conversion by simultaneously adsorbing and oxidizing HCHO. This work provides a simple approach to increasing reactant concentration on the catalyst to increase the rate of reaction.     

UV Emission of Gd3+ in the Presence of Cu2+: Towards Luminescence Quenching through Quantum Cutting?

The first investigation into the ultraviolet (UV) photoluminescence of gadolinium(III) in the presence of copper(II) is reported. A melt‐quenched barium phosphate glass was used as a model matrix. The optical spectroscopy assessment shows that with increasing CuO concentration the Cu²⁺ absorption band grows steadily, whereas the UV emission from Gd³⁺ ions is progressively quenched. The data, thus, suggests the existence of a Gd³⁺→Cu²⁺ energy‐transfer process ocurring through quantum cutting. A downconversion/cross‐relaxation pathway proceeding through a virtual state in Gd³⁺ is proposed. These findings suggest gadolinium(III) could potentially be used in the optical sensing of copper(II).     

Interactions in the Detritus–Dissolved Organic Matter–Bacteria–Algae System in Freshwater Ecosystems of Different Trophic Levels: Water Quality Formation

Russian Journal of General Chemistry - Results from decades-long authors’ research on the natural ecosystems of several freshwater water bodies in the Central Region of the European part of...     

Nafion-Induced Metal-Metal Interactions in a Platinum(II) Terpyridyl Acetylide Complex:a Luminescent Sensor for Detection of Volatile Organic Compounds

Introduction The design of new solid-state sensor materials that can selectively adsorb volatile organic compounds (VOC) and produce measurable color and/or lumines-cence changes is of potential significance in the sense of environmental and public safety control.1-5 The use of metal complexes as optical sensors for VOC detection has been reported, and most of them are based on the susceptibility of metal-to-ligand charge transfer (MLCT) and/or metal-metal-to-ligand charge transfer (MMLC…     

Origin of the Aggregation-Induced Phosphorescence of Platinum(II) Complexes: The Role of Metal–Metal Interactions on Emission Decay in the Crystalline State

Discerning the origins of the phosphorescent aggregation-induced emission (AIE) from Pt(II) complexes is crucial for developing the broader range of photo-functional materials. Over the past few decades, several mechanisms of phosphorescent AIE have been proposed, however, not have been directly elucidated. Herein, we describe phosphorescence and deactivation processes of four class of AIE active Pt(II) complexes in the crystalline state based on experimental and theoretical investigation. These complexes show metal-to-ligand and/or metal−metal-to-ligand charge transfer emission in crystalline state with different heat resistance against thermal emission quenching. The calculated energy profiles including the minimum energy crossing point between S₀ and T₁ states were consistent with the heat resistant properties, which provided the mechanism for AIE expression. Furthermore, we have clarified the role of metal-metal interaction in AIE by comparing two computational models.