Cross-Dehydrogenative Coupling Polymerization via C−H Activation for the Synthesis of Conjugated Polymers

Owing to their versatile (opto)electronic properties, conjugated polymers have found application in several organic electronic devices. Cross-coupling reactions such as Stille, Suzuki, Kumada couplings, and direct arylation reactions have proved to be effective for their synthesis. More atom-efficient oxidative direct arylation polymerization has also been reported for making homopolymers. However, growing interest toward donor-acceptor polymers has led to the recent emergence of cross-dehydrogenative coupling (CDC) polymerization to synthesize alternating copolymers without any prefunctionalization of monomers. Metal-catalyzed cross-coupling of two simple arenes via double C−H activation, or of an arene with an alkene via oxidative Heck-type reaction have been used so far for CDC polymerization. In this article, we discuss the development of CDC polymerization protocols along with the relevant small molecule CDC reactions for an improved understanding of these reactions.     

Enantioselective Intermolecular Radical Amidation and Amination of Benzylic C−H Bonds via Dual Copper and Photocatalysis

A method for direct access to enantioenriched benzylic amides and carbamate-protected primary benzylamines by C−H functionalization is reported. The C−H substrate is used as limiting reagent with only a small excess of the unactivated amide or carbamate nucleophile. The enantioselective intermolecular dehydrogenative C−N bond formation is enabled by a combination of a chiral copper catalyst, a photocatalyst, and an oxidant, and it takes place under mild conditions, which allow for a broad substrate scope. The method is compatible with late-stage C−H functionalization, and it provides easy access to ¹⁵N-labeled amides and amines starting from cheap ¹⁵NH₄Cl.     

Synthesis of Conjugated Polymers via Transition Metal Catalysed C−H Bond Activation

Transition metal catalysed C−H bond activation chemistry has emerged as an exciting and promising approach in organic synthesis. This allows us to synthesize a wider range of functional molecules and conjugated polymers in a more convenient and more atom economical way. The formation of C−C bonds in the construction of pi-conjugated systems, particularly for conjugated polymers, has benefited much from the advances in C−H bond activation chemistry. Compared to conventional transition-metal catalysed cross-coupling polymerization such as Suzuki and Stille cross-coupling, pre-functionalization of aromatic monomers, such as halogenation, borylation and stannylation, is no longer required for direct arylation polymerization (DArP), which involve C−H/C−X cross-coupling, and oxidative direct arylation polymerization (Ox-DArP), which involves C−H/C−H cross-coupling protocols driven by the activation of monomers’ C(sp²)−H bonds. Furthermore, poly(annulation) via C−H bond activation chemistry leads to the formation of unique pi-conjugated moieties as part of the polymeric backbone. This review thus summarises advances to date in the synthesis of conjugated polymers utilizing transition metal catalysed C−H bond activation chemistry. A variety of conjugated polymers via DArP including poly(thiophene), thieno[3,4-c]pyrrole-4,6-dione)-containing, fluorenyl-containing, benzothiadiazole-containing and diketopyrrolopyrrole-containing copolymers, were summarized. Conjugated polymers obtained through Ox-DArP were outlined and compared. Furthermore, poly(annulation) using transition metal catalysed C−H bond activation chemistry was also reviewed. In the last part of this review, difficulties and perspective to make use of transition metal catalysed C−H activation polymerization to prepare conjugated polymers were discussed and commented.     

Vinylic Trifluoromethylselenolation via Pd-Catalyzed C−H Activation

Trifluorometylselenolation via C−H activation is barely described in literature. In particular, no such vinylic functionalization has been yet described. Herein, a palladium-catalyzed trifluoromethylselenolation of vinylic C−H bonds is described. The 5-methoxy-8-aminoquinoline has been used as auxiliary directing group to perform this reaction. The reaction gives excellent yields with α-substituted compounds whatever the substituents and a microwave activation can be used to accelerate the reaction. With β-substituted substrates lower yields, but still satisfactory, are obtained. This methodology was also successfully extended to other fluoroalkylselenyl groups.     

On-Surface Synthesis of One-Dimensional Carbon-Based Nanostructures via C−X and C−H Activation Reactions

The past decades have witnessed the emergence of low-dimensional carbon-based nanostructures owing to their unique properties and various subsequent applications. It is of fundamental importance to explore ways to achieve atomically precise fabrication of these interesting structures. The newly developed on-surface synthesis approach provides an efficient strategy for this challenging issue, demonstrating the potential of atomically precise preparation of low-dimensional nanostructures. Up to now, the formation of various surface nanostructures, especially carbon-based ones, such as graphene nanoribbons (GNRs), kinds of organic (organometallic) chains and films, have been achieved via on-surface synthesis strategy, in which in-depth understanding of the reaction mechanism has also been explored. This review article will provide a general overview on the formation of one-dimensional carbon-based nanostructures via on-surface synthesis method. In this review, only a part of the on-surface chemical reactions (specifically, C−X (X=Cl, Br, I) and C−H activation reactions) under ultra-high vacuum conditions will be covered.     

Homolytic C−H Bond Activation by Phosphine−Quinone-Based Radical Ion Pairs

Herein, we present the formation of transient radical ion pairs (RIPs) by single-electron transfer (SET) in phosphine−quinone systems and explore their potential for the activation of C−H bonds. PMes₃ (Mes=2,4,6-Me₃C₆H₂) reacts with DDQ (2,3-dichloro-5,6-dicyano-1,4-benzoquinone) with formation of the P−O bonded zwitterionic adduct Mes₃P−DDQ ( 1 ), while the reaction with the sterically more crowded PTip₃ (Tip=2,4,6-iPr₃C₆H₂) afforded C−H bond activation product Tip₂P(H)(2-[CMe₂(DDQ)]-4,6-iPr₂-C₆H₂) ( 2 ). UV/Vis and EPR spectroscopic studies showed that the latter reaction proceeds via initial SET, forming RIP [PTip₃]⋅⁺[DDQ]⋅⁻, and subsequent homolytic C−H bond activation, which was supported by DFT calculations. The isolation of analogous products, Tip₂P(H)(2-[CMe₂{TCQ−B(C₆F₅)₃}]-4,6-iPr₂-C₆H₂) ( 4 , TCQ=tetrachloro-1,4-benzoquinone) and Tip₂P(H)(2-[CMe₂{oQ^tBu−B(C₆F₅)₃}]-4,6-iPr₂-C₆H₂) ( 8 , oQ^tBu=3,5-di-tert-butyl-1,2-benzoquinone), from reactions of PTip₃ with Lewis-acid activated quinones, TCQ−B(C₆F₅)₃ and oQ^tBu−B(C₆F₅)₃, respectively, further supports the proposed radical mechanism. As such, this study presents key mechanistic insights into the homolytic C−H bond activation by the synergistic action of radical ion pairs.     

RhIII-Catalyzed C−H Activation of Aryl Hydroxamates for the Synthesis of Isoindolinones

Rh^III-catalyzed C−H functionalization reaction yielding isoindolinones from aryl hydroxamates and ortho-substituted styrenes is reported. The reaction proceeds smoothly under mild conditions at room temperature, and tolerates a range of functional groups. Experimental and computational investigations support that the high regioselectivity observed for these substrates results from the presence of an ortho-substituent embedded in the styrene. The resulting isoindolinones are valuable building blocks for the synthesis of bioactive compounds. They provide easy access to the natural-product-like compounds, isoindolobenzazepines, in a one-pot two-step reaction. Selected isoindolinones inhibited Hedgehog (Hh)-dependent differentiation of multipotent murine mesenchymal progenitor stem cells into osteoblasts.     

Controlling Spin-Correlated Radical Pairs with Donor–Acceptor Dyads: A New Concept to Generate Reduced Metal Complexes for More Efficient Photocatalysis

One-electron reduced metal complexes derived from photoactive ruthenium or iridium complexes are important intermediates for substrate activation steps in photoredox catalysis and for the photocatalytic generation of solar fuels. However, owing to the heavy atom effect, direct photochemical pathways to these key intermediates suffer from intrinsic efficiency problems resulting from rapid geminate recombination of radical pairs within the so-called solvent cage. In this study, we prepared and investigated molecular dyads capable of producing reduced metal complexes via an indirect pathway relying on a sequence of energy and electron transfer processes between a Ru complex and a covalently connected anthracene moiety. Our test reaction to establish the proof-of-concept is the photochemical reduction of ruthenium(tris)bipyridine by the ascorbate dianion as sacrificial donor in aqueous solution. The photochemical key step in the Ru-anthracene dyads is the reduction of a purely organic (anthracene) triplet excited state by the ascorbate dianion, yielding a spin-correlated radical pair whose (unproductive) recombination is strongly spin-forbidden. By carrying out detailed laser flash photolysis investigations, we provide clear evidence for the indirect reduced metal complex generation mechanism and show that this pathway can outperform the conventional direct metal complex photoreduction. The further optimization of our approach involving relatively simple molecular dyads might result in novel photocatalysts that convert substrates with unprecedented quantum yields.     

Synthesis of Heptagon-Containing Polyarenes by Catalytic C−H Activation

Nanocarbons incorporating non-hexagonal aromatic rings - such as five-, seven-, and eight-membered rings - have various intriguing physical properties such as curved structures, unique one-dimensional packing, and promising magnetic, optical, and conductivity properties. Herein, we report an efficient synthetic approach to polycyclic aromatics containing seven-membered rings via a palladium-catalyzed intramolecular Ar−H/Ar−Br coupling. In addition to all-hydrocarbon scaffolds, heteroatom-embedded heptagon-containing polyarenes can be efficiently constructed with this method. Rhodium- and palladium-catalyzed sequential six- and seven-membered ring formations also afford complex heptagon-containing molecular nanocarbons from readily available arylacetylenes and biphenyl boronic acids. Detailed mechanistic analysis by DFT calculations showed the feasibility of seven-membered ring formation by a concerted metalation-deprotonation mechanism. This reaction can serve as a template for the synthesis of a wide range of seven-membered ring-containing molecular nanocarbons.     

Catalytic C−C/C−H Bond Activation Relay for Synthesis of Fluorescent Naphthoquinolizinium Salts

Herein, we report the design and synthesis of a series of novel cationic nitrogen-embedded polyaromatic hydrocarbons with a planar geometry. The synthetic pathway is based on catalytic C−C/C−H bond activation relay that enabled preparation of regioselectively 5,6,10,11-tetrasubstituted naphtho[2,1,8-ija]quinolizinium salts bearing various types of substituents. Single-crystal X-ray analyses of selected compounds confirmed planarity of the quinolizinium core. Most of the prepared compounds exhibited strong fluorescence (Φ_s up to >99 %) ranging from 420–600 nm depending on the substitution pattern. According to DFT calculations LUMO is always distributed over the quinolizinium framework regardless of the attached substituents, whereas delocalization of HOMO is related to the substitution pattern. Electrochemical measurements show irreversible reduction of all compounds, which is supported by the calculated location of LUMO orbitals.     

Recyclable Ruthenium Catalyst for Distal meta-C−H Activation

We disclose the unprecedented hybrid-ruthenium catalysis for distal meta-C−H activation. The hybrid-ruthenium catalyst was recyclable, as was proven by various heterogeneity tests, and fully characterized with various microscopic and spectroscopic techniques, highlighting the physical and chemical stability. Thereby, the hybrid-ruthenium catalysis proved broadly applicable for meta-C−H alkylations of among others purine-based nucleosides and natural product conjugates. Additionally, its versatility was further reflected by meta-C−H activations through visible-light irradiation, as well as para-selective C−H activations.     

DMSO-Enabled Selective Radical O−H Activation of 1,3(4)-Diols

Control of selectivity is one of the central topics in organic chemistry. Although unprecedented alkoxyl-radical-induced transformations have drawn a lot of attention, compared to selective C−H activation, selective radical O−H activation remains less explored. Herein, we report a novel selective radical O−H activation strategy of diols by combining spatial effects with proton-coupled electron transfer (PCET). It was found that DMSO is an essential reagent that enables the regioselective transformation of diols. Mechanistic studies indicated the existence of the alkoxyl radical and the selective interaction between DMSO and hydroxyl groups. Moreover, the distal C−C cleavage was realized by this selective alkoxyl-radical-initiation protocol.     

Enantioselective Strategies for The Synthesis of N−N Atropisomers

Axially chiral compounds have been always considered a laboratory curiosity with rare prospects of being applied in asymmetric synthesis. Things have changed very quickly in the last twenty years when it was understood the important role and the enormous impact that these compounds have in medicinal, biological and material chemistry. The asymmetric synthesis of atropisomers became a rapidly expanding field and recent reports on the development of N−N atropisomers strongly prove how this research field is a hot topic open to new challenges and frontiers of asymmetric synthesis. This review focuses on the recent advances in the enantioselective synthesis of N−N atropisomers highlighting the strategies and breakthroughs to obtain this novel and stimulating atropisomeric framework.     

Porous Organic Phenanthroline-Based Polymer as an Efficient Transition-Metal-Free Heterogeneous Catalyst for Direct Aromatic C−H Activation

Direct C−H bond transformation has been regarded as one of the most important areas in organic synthesis in both academia and industry. However, the heterogeneous transition-metal-free catalysis of direct C−H bond transformation has remained a contemporary challenge. To tackle this challenge, we designed and constructed a porous phenanthroline-based polymer (namely POP-Phen) via free radical polymerization of vinyl-functionalized phenanthroline monomers. POP-Phen shows excellent catalytic performances in transition-metal-free catalyzed C−H arylation, even better than those of the corresponding homogeneous catalyst, which is mainly attributed to the high density of catalytically active sites in the heterogeneous catalyst. Kinetic isotope experiments and spectral characterizations demonstrate the electron-transfer between the heterogeneous catalyst and the base (t-BuOK), a key step for C−H activation. We believe that this porous organic phenanthroline polymer could open a new door for the design of novel heterogeneous transition-metal-free catalysts for direct C−H activation.     

Chemistry Platform for the Ultrafast Continuous Synthesis of High-Quality III–V Quantum Dots

A chemistry platform for the fast continuous synthesis of III–V quantum dots is demonstrated. III-nitride QDs are prepared by using short residence times (less than 30 s) in a one-step continuous process with supercritical solvents. GaN QDs prepared via this route exhibit strong UV photoluminescence with a structuring of the emission signal at low temperature (5 K), confirming their high quality. An example of metal site substitution is given with the synthesis of In_xGa_1-xN solid solution. A continuous bandgap shift towards lower energies is demonstrated when increasing the indium content with strong photoluminescence signals from UV to visible. The chemistry platform proposed could be easily extrapolated to binary and ternary III phosphides or arsenides with the homologous V source.     

Transition Metal-Catalyzed Intermolecular Cascade C−H Activation/Annulation Processes for the Synthesis of Polycycles

Polycycles are abundantly present in numerous advanced chemicals, functional materials, bioactive molecules and natural products. However, the strategies for the synthesis of polycycles are limited to classical reactions and transition metal-catalyzed cross-coupling reactions, requiring pre-functionalized starting materials and lengthy synthetic operations. The emergence of novel approaches shows great promise for the fields of organic/medicinal/materials chemistry. Among them, transition metal-catalyzed C−H activation followed by intermolecular annulation reactions prevail, due to their straightforward manner with high atom- and step-economy, providing rapid, concise and efficient methods for the construction of diverse polycycles. Several strategies have been developed for the synthesis of polycycles, relying on sequential multiple C−H activation/annulation, or combination of C−H activation/annulation and further interaction with a proximal group, or merger of C−H activation with a cycloaddition reaction, or in situ formation of the directing group. These are attractive, efficient, step- and atom-economic methods starting from commercially available materials. This Minireview will provide an introduction to transition metal-catalyzed C−H activation for the synthesis of polycycles, helping researchers to discover indirect connections and reveal hidden opportunities. It will also promote the discovery of novel synthetic strategies relying on C−H activation.     

Hemin-Promoted Direct C−H Thiolation in the Synthesis of Diaryl Sulfides

Diaryl sulfides are a class of important synthetic chemical units. Herein, we report a new method for direct preparation of diphenyl sulfides using P-toluenesulfonyl chloride as an effective thiophenyl radical precursor with assistance from Hemin. Various substituted anisoles and benzenesulfonyl chlorides are well tolerated, resulting in moderate to good yields of diaryl sulfides. The potential of the proposed method is validated by good yields obtained in gram scale reactions.     

Synthesis of N‐Aryl‐2‐substituted Tetrahydrobenzimidazoles via Direct N‐Arylation

A series of novel N‐aryl‐2‐substituted tetrahydrobenzimidazoles has been synthesized via direct N‐arylation of 2‐substituted tetrahydrobenzimidazoles, which was accomplished by a medium aryl electrophile, 4‐methylsulfonylfluorobenze, in the presence of 37% KF/Al₂O₃ and 18‐crown‐6 in fair yields under mild reaction conditions. Meanwhile, the hydrogenation of 2‐phenylbenzimidazole was studied.     

Direct Regio- and Diastereoselective Synthesis of δ-Lactams from Acrylamides and Unactivated Alkenes Initiated by RhIII-Catalyzed C−H Activation

We report a Rh^III-catalyzed regio- and diastereoselective synthesis of δ-lactams from readily available acrylamide derivatives and unactivated alkenes. The reaction provides a rapid route to a diverse set of δ-lactams in good yield and stereoselectivity, which serve as useful building blocks for substituted piperidines. The regioselectivity of the reaction with unactivated terminal alkene is significantly improved by using Cp^t ligand on the Rh^III catalyst. The synthetic utility of the reaction is demonstrated by the preparation of a potential drug candidate containing a trisubstituted piperidine moiety. Mechanistic studies show that the reversibility of the C−H activation depends on the choice of Cp ligand on the Rh^III catalyst. The irreversible C−H activation is observed and becomes turnover-limiting with [Cp^tRhCl₂]₂ as catalyst.     

Direct gem-Difluoroalkenylation of X−H Bonds with Trifluoromethyl Ketone N-Triftosylhydrazones for Synthesis of Tetrasubstituted Heteroatomic gem-Difluoroalkenes

The direct gem-difluoroalkenylation of X−H bonds represents the most straightforward approach to access heteroatomic gem-difluoroalkenes that, as the isostere of the carbonyl group, have great potency in drug discovery. However, the construction of tetrasubstituted heteroatomic gem-difluoroalkenes by this strategy is still an unsolved problem. Here, we report the first direct X−H bond gem-difluoroalkenylation of amines and alcohols with trifluoromethyl ketone N-triftosylhydrazones under silver (for (hetero)aryl hydrazones) or rhodium (for alkyl hydrazones), thereby providing a most powerful method for the synthesis of tetrasubstituted heteroatomic gem-difluoroalkenes. This method features a broad substrate scope, high product yield, excellent functional group tolerance, and operational simplicity (open air conditions). Moreover, the site-specific replacement of the carbonyl group with a gem-difluorovinyl ether bioisostere in drug Trimebutine and the post-modification of bioactive molecules demonstrates potential use in medicinal research. Finally, the reaction mechanism was investigated by combining experiments and DFT calculations, and disclosed that the key step of HF elimination occurred via five-membered ring transition state, and the difference in the electrophilicity of Ag- and Rh-carbenes as well as the multiple intermolecular interactions rendered the effectiveness of Rh catalyst selectively for alkyl hydrazones.