FtsZ Reorganization Facilitates Deformation of Giant Vesicles in Microfluidic Traps**

The geometry of reaction compartments can affect the local outcome of interface-restricted reactions. Giant unilamellar vesicles (GUVs) are commonly used to generate cell-sized, membrane-bound reaction compartments, which are, however, always spherical. Herein, we report the development of a microfluidic chip to trap and reversibly deform GUVs into cigar-like shapes. When trapping and elongating GUVs that contain the primary protein of the bacterial Z ring, FtsZ, we find that membrane-bound FtsZ filaments align preferentially with the short GUV axis. When GUVs are released from this confinement and membrane tension is relaxed, FtsZ reorganizes reversibly from filaments into dynamic rings that stabilize membrane protrusions; a process that allows reversible GUV deformation. We conclude that microfluidic traps are useful for manipulating both geometry and tension of GUVs, and for investigating how both affect the outcome of spatially-sensitive reactions inside them, such as that of protein self-organization.     

UV-induced bursting of cell-sized multicomponent lipid vesicles in a photosensitive surfactant solution

We study the behavior of multicomponent giant unilamellar vesicles (GUVs) in the presence of AzoTAB, a photosensitive surfactant. GUVs are made of an equimolar ratio of dioleoylphosphatidylcholine (DOPC) and dipalmitoylphosphatidylcholine (DPPC) and various amounts of cholesterol (Chol), where the lipid membrane shows a phase separation into a DPPC-rich liquid-ordered (L(o)) phase and a DOPC-rich liquid-disordered (L(d)) phase. We find that UV illumination at 365 nm for 1 s induces the bursting of a significant fraction of the GUV population. The percentage of UV-induced disrupted vesicles, called bursting rate (Y(burst)), increases with an increase in [AzoTAB] and depends on [Chol] in a non-monotonous manner. Y(burst) decreases when [Chol] increases from 0 to 10 mol % and then increases with a further increase in [Chol], which can be correlated with the phase composition of the membrane. We show that Y(burst) increases with the appearance of solid domains ([Chol] = 0) or with an increase in area fraction of L(o) phase (with increasing [Chol] ≥ 10 mol %). Under our conditions (UV illumination at 365 nm for 1 s), maximal bursting efficiency (Y(burst) = 53%) is obtained for [AzoTAB] = 1 mM and [Chol] = 40 mol %. Finally, by restricting the illumination area, we demonstrate the first selective UV-induced bursting of individual target GUVs. These results show a new method to probe biomembrane mechanical properties using light as well as pave the way for novel strategies of light-induced drug delivery.     

Shape changes and vesicle fission of giant unilamellar vesicles of liquid-ordered phase membrane induced by lysophosphatidylcholine

Liquid-ordered phase (lo phase) of lipid membranes has properties that are intermediate between those of liquid-crystalline phase and those of gel phase and has attracted much attention in both biological and biophysical aspects. Rafts in the lo phase in biomembranes play important roles in cell function of mammalian cells such as signal transduction. In this report, we have prepared giant unilamellar vesicles (GUVs) of lipid membranes in the lo phase and investigated their physical properties using phase-contrast microscopy and fluorescence microscopy. GUVs of dipalmitoyl-phosphatidylcholine (DPPC)/cholesterol membranes and also GUVs of sphingomyelin (SM)/cholesterol membranes in the lo phase in water were formed at 20-37 degrees C successfully, when these membranes contained >/=30 mol % cholesterol. The diameters of GUVs of DPPC/cholesterol and SM/cholesterol membranes did not change from 50 to 28 degrees C, supporting that the membranes of these GUVs were in the lo phase. To elucidate the interaction of a substance with a long hydrocarbon chain with the lo phase membrane, we investigated the interaction of low concentrations (less than critical micelle concentration) of lysophosphatidylcholine (lyso-PC) with DPPC/cholesterol GUVs and SM/cholesterol GUVs in the lo phase. We found that lyso-PC induced several shape changes and vesicle fission of these GUVs above their threshold concentrations in water. The analysis of these shape changes indicates that lyso-PC can be partitioned into the external monolayer in the lo phase of the GUV from the aqueous solution. Threshold concentrations of lyso-PC in water to induce the shape changes and vesicle fission increased greatly with a decrease in chain length of lyso-PC. Thermodynamic analysis of this result indicates that shape changes and vesicle fission occur at threshold concentrations of lyso-PC in the membrane. These new findings on GUVs of the lo phase membranes indicate that substances with a long hydrocarbon chain such as lyso-PC can enter into the lo phase membrane and also the raft in the cell membrane. We have also proposed a mechanism for the lyso-PC-induced vesicle fission of GUVs.     

Controlling the internal structure of giant unilamellar vesicles by means of reversible temperature dependent sol-gel transition of internalized poly(N-isopropyl acrylamide)

In this work, we present preparation and basic applications of lipid-bilayer-enclosed picoliter volumes (microcontainers) of solutions of poly(N-isopropylacrylamide) (PNIPAAm). Giant unilamellar vesicles (GUVs) were prepared from phospholipids using a standard swelling procedure and subsequently surface immobilized. Clear, slightly viscous solutions of PNIPAAm of varying concentration in aqueous buffer were directly pressure-microinjected into the GUVs, using a submicrometer-sized, pointed capillary. The GUV was subjected to changing temperature over a 21-40 degrees C range. The typical phase transition of the polymeric material upon heating and cooling across the lower critical solution temperature was followed using optical microscopy and shown to be reversible over multiple sequential heating/cooling cycles without compromising the integrity of the GUV membrane. Fluorescent, carboxylic acid modified 200 nm latex beads, co-injected with the PNIPAAm solution, were temperature-reversibly immobilized during the phase transition, practically freezing the Brownian motion of the entrapped particles in the volume. Furthermore, a co-injected water soluble fluorescent polysaccharide-dye conjugate was shown not to migrate from the aqueous phase into the hydrophobic polymer part upon heating, whereas the fluorescent beads were completely but reversibly immobilized in the hydrophobic domains of dense polymer agglomerates. The system reported here provides a feasible method for the reversible stabilization and solidification of GUV interior volumes, e.g., as a micrometer-sized model system for controlled drug release.     

Reversible pH-Responsive Coacervate Formation in Lipid Vesicles Activates Dormant Enzymatic Reactions

In situ, reversible coacervate formation within lipid vesicles represents a key step in the development of responsive synthetic cellular models. Herein, we exploit the pH responsiveness of a polycation above and below its pK_a, to drive liquid–liquid phase separation, to form single coacervate droplets within lipid vesicles. The process is completely reversible as coacervate droplets can be disassembled by increasing the pH above the pK_a. We further show that pH-triggered coacervation in the presence of low concentrations of enzymes activates dormant enzyme reactions by increasing the local concentration within the coacervate droplets and changing the local environment around the enzyme. In conclusion, this work establishes a tunable, pH responsive, enzymatically active multi-compartment synthetic cell. The system is readily transferred into microfluidics, making it a robust model for addressing general questions in biology, such as the role of phase separation and its effect on enzymatic reactions using a bottom-up synthetic biology approach.     

On‐chip generation of monodisperse giant unilamellar lipid vesicles containing quantum dots

Monodispersed lipid vesicles have been used as a drug delivery vehicle and a biochemical reactor. To generate monodispersed lipid vesicles in the nano‐ to micrometer size range, an extrusion step should be included in conventional hand‐shaking method of lipid vesicle synthesis. In addition, lipid vesicles as a drug carrier still need to be improved to effectively encapsulate concentrated biomolecules such as cells, proteins, and target drugs. To overcome these limitations, this paper reports a new microfluidic platform for continuous synthesis of small‐sized (～10 μm) giant unilamellar vesicles (GUVs) containing quantum dots (QDs) as a nanosized model drug. To generate GUVs, we introduced an additional cross‐flow to break vesicles into small size. 1,2 ‐ dimyristoyl‐sn‐glycero ‐ 3 ‐ phosphocholine (DMPC) in an octanol–chloroform mixture was used in the construction of self‐assembled membrane. Consequently, we have successfully demonstrated the fabrication of monodispersed GUVs with 7?12 μm diameter containing QDs. The proposed synthesis method of cell‐sized GUVs would be highly desirable for applications such as multipurpose drug encapsulation and delivery.     

Reversible pH‐Responsive Coacervate Formation in Lipid Vesicles Activates Dormant Enzymatic Reactions

In situ, reversible coacervate formation within lipid vesicles represents a key step in the development of responsive synthetic cellular models. Herein, we exploit the pH responsiveness of a polycation above and below its pK_a, to drive liquid–liquid phase separation, to form single coacervate droplets within lipid vesicles. The process is completely reversible as coacervate droplets can be disassembled by increasing the pH above the pK_a. We further show that pH‐triggered coacervation in the presence of low concentrations of enzymes activates dormant enzyme reactions by increasing the local concentration within the coacervate droplets and changing the local environment around the enzyme. In conclusion, this work establishes a tunable, pH responsive, enzymatically active multi‐compartment synthetic cell. The system is readily transferred into microfluidics, making it a robust model for addressing general questions in biology, such as the role of phase separation and its effect on enzymatic reactions using a bottom‐up synthetic biology approach.     

Dynamics imaging of lipid phases and lipid-marker interactions in model biomembranes

Biomembranes are complex systems that regulate numerous biological processes. Lipid phases that constitute these membranes influence their properties and transport characteristics. Here, we demonstrate the potential of short-range dynamics imaging (excited-state lifetime, rotational diffusion, and order parameter) as a sensitive probe of lipid phases in giant unilamellar vesicles (GUVs). Liquid-disordered and gel phases were labeled with Bodipy-PC at room temperature. Two-photon fluorescence lifetime imaging microscopy of single-phase GUVs reveals more heterogeneity in fluorescence lifetimes of Bodipy in the gel phase (DPPC: 3.8+/-0.6 ns) as compared with the fluid phase (DOPC: 5.2+/-0.2 ns). The phase-specificity of excited-state lifetime of Bodipy-PC is attributed to the stacking of ordered lipid molecules that possibly enhances homo-FRET. Fluorescence polarization anisotropy imaging also reveals distinctive molecular order that is phase specific. The results are compared with DiI-C12-labeled fluid GUVs to investigate the sensitivity of our fluorescence dynamics assay to different lipid-marker interactions. Our results provide a molecular perspective of lipid phase dynamics and the nature of their microenvironments that will ultimately help our understanding of the structure-function relationship of biomembranes in vivo. Furthermore, these ultrafast excited-state dynamics will be used for molecular dynamics simulation of lipid-lipid, lipid-marker and lipid-protein interactions.     

Membrane fusion of giant unilamellar vesicles of neutral phospholipid membranes induced by La3+

Membrane fusions of vesicles of biomembranes play various important roles in cells, but their mechanisms are unclear and controversial. In the present study, we found that 30 microM to 1 mM La3+ induced membrane fusion of two giant unilamellar vesicles (GUVs) composed of a mixture of dioleoylphosphatidylcholine (DOPC) and dipalmitoleoylphosphatidylethanolamine (DPOPE). We succeeded in observing a process of this membrane fusion in detail. First, two GUVs became strongly associated, with a partition membrane between them composed of two bilayers, one from each GUV. Then, the partition membrane was suddenly broken at one site on its edge. The area of this breakage site gradually spread, until it was completely separated from the GUV to complete the membrane fusion. Here, we propose a new model (i.e., the partition breakage model) for the mechanism of La3+ -induced membrane fusion of GUVs.     

Size control of giant unilamellar vesicles prepared from inverted emulsion droplets

The production of giant lipid vesicles with controlled size and structure will be an important technology in the design of quantitative biological assays in cell-mimetic microcompartments. For establishing size control of giant vesicles, we investigated the vesicle formation process, in which inverted emulsion droplets are transformed into giant unilamellar vesicles (GUVs) when they pass through an oil/water interface. The relationship between the size of the template emulsion and the converted GUVs was studied using inverted emulsion droplets with a narrow size distribution, which were prepared by microfluidics. We successfully found an appropriate centrifugal acceleration condition to obtain GUVs that had a desired size and narrow-enough size distribution with an improved yield so that emulsion droplets can become the template for GUVs.     

Efficient electroformation of supergiant unilamellar vesicles containing cationic lipids on ITO-coated electrodes

Giant unilamellar vesicles (GUVs) represent a versatile in vitro system widely used to study properties of lipid membranes and their interaction with biomacromolecules and colloids. Electroformation with indium tin oxide (ITO) coated coverslips as electrodes is a standard approach to GUV production. In the case of cationic GUVs, however, application of this approach leads to notorious difficulties. We discover that this is related to aging of ITO-coated coverslips during their repeated use, which is reflected in their surface topography on the nanoscale. We find that mild annealing of the ITO-coated surface in air reverts the effects of aging and ensures efficient reproducible electroformation of supergiant (diameter > 100 μm) unilamellar vesicles containing cationic lipids.     

Reversible Morphological Evolution of Responsive Giant Vesicles to Nanospheres by the Self‐Assembly of Crystalline‐b‐Coil Polyphosphazene Block Copolymers

The preparation of long‐term‐stable giant unilamellar vesicles (GUVs, diameter ≥1000 nm) and large vesicles (diameter ≥500 nm) by self‐assembly in THF of the crystalline‐b‐coil polyphosphazene block copolymers [N=P(OCH₂CF₃)₂]_n‐b‐[N=PMePh]_m ( 4 a : n=30, m=20; 4 b : n=90, m=20; 4 c : n=200, m=85), which combine crystalline [N=P(OCH₂CF₃)₂] and amorphous [N=PMePh] blocks, both of which are flexible, is reported. SEM, TEM, and wide‐angle X‐ray scattering experiments demonstrated that the stability of these GUVs is induced by crystallization of the [N=P(OCH₂CF₃)₂] blocks at the capsule wall of the GUVS, with the [N=PMePh] blocks at the corona. Higher degrees of crystallinity of the capsule wall are found in the bigger vesicles, which suggests that the crystallinity of the [N=P(OCH₂CF₃)₂] block facilitates the formation of large vesicles. The GUVs are responsive to strong acids (HOTf) and, after selective protonation of the [N=PMePh] block, they undergo a morphological evolution to smaller spherical micelles in which the core and corona roles have been inverted. This morphological evolution is totally reversible by neutralization with a base (NEt₃), which regenerates the original GUVs. The monitoring of this process by dynamic light scattering allowed a mechanism to to be proposed for this reversible morphological evolution in which the block copolymer 4 a and its protonated form 4 a⁺ are intermediates. This opens a route to the design of reversibly responsive polymeric systems in organic solvents. This is the first reversibly responsive vesicle system to operate in organic media.     

Recruitment of receptors at supported lipid bilayers promoted by the multivalent binding of ligand-modified unilamellar vesicles

The development of model systems that mimic biological interactions and allow the control of both receptor and ligand densities, is essential for a better understanding of biomolecular processes, such as the recruitment of receptors at interfaces, at the molecular level. Here we report a model system based on supported lipid bilayers (SLBs) for the investigation of the clustering of receptors at their interface. Biotinylated SLBs, used as cell membrane mimics, were functionalized with streptavidin (SAv), used here as receptor. Subsequently, biotinylated small (SUVs) and giant (GUVs) unilamellar vesicles were bound to the SAv-functionalized SLBs by multivalent interactions and found to induce the recruitment of both SAv on the SLB surface and the biotin moieties in the vesicles. The recruitment of receptors was investigated with quartz crystal microbalance with dissipation monitoring (QCM-D), which allowed the identification of the biotin and SAv densities necessary to obtain receptor recruitment. At approx. 0.6% of biotin in the vesicles, a transition between dense and low vesicle packing was observed, which coincided with the transitions between recruitment in the vesicles vs. recruitment in the SLB and between full and partial use of the biotin moieties in the vesicle. Direct optical visualization of the clustering at the interface of individual GUVs with the SLB platform was achieved with fluorescence microscopy, showing recruitment of SAv at the contact area as well as the deformation of the vesicles upon binding. Different vesicle binding regimes were observed for lower and higher biotin densities in the vesicles and at the SLBs. A more quantitative analysis of the molecular parameters implied in the interaction, indicated that approx. 10% of the vesicle area constitutes the contact area. Moreover, the SUV binding and recruitment appeared to be fast on the analysis time scale, whereas the binding of GUVs is slower due to the larger SLB area over which SAv recruitment needs to occur. The mechanisms revealed in this study may provide insight in biological processes in which recruitment occurs.

The development of model systems that mimic biological interactions and allow the control of both receptor and ligand densities, is essential for a molecular understanding of biomolecular processes, such as the recruitment of receptors at interfaces.     

Partitioning of dual-lipidated peptides into membrane microdomains: lipid sorting vs peptide aggregation

The lateral membrane organization and phase behavior of the lipid mixture DMPC(di-C(14))/DSPC(di-C(18))/cholesterol (0-33 mol %) with and without an incorporated fluorescence-labeled palmitoyl/farnesyl dual-lipidated peptide, BODIPY-Gly-Cys(Pal)-Met-Gly-Leu-Pro-Cys(Far)-OMe, which represents a membrane recognition model system for Ras proteins, was studied by two-photon excitation fluorescence microscopy. Measurements were performed on giant unilamellar vesicles (GUVs) over a large temperature range, ranging from 30 to 80 degrees C to cover different lipid phase states (all-gel, fluid/gel, liquid-ordered, all-fluid). At temperatures where the fluid-gel coexistence region of the pure binary phospholipid system occurs, large-scale concentration fluctuations appear. Incorporation of cholesterol levels up to 33 mol % leads to a significant increase of conformational order in the membrane system and a reduction of large domain structures. Adding the peptide leads to dramatic changes in the lateral organization of the membrane. With cholesterol present, a phase separation is induced by a lipid sorting mechanism owing to the high affinity of the lipidated peptide to a fluid, DMPC-rich environment. This phase separation leads to the formation of peptide-containing domains with high fluorescence intensity that become progressively smaller with decreasing temperature. As a result, the local concentration of the peptide increases steadily within the confines of the shrinking domains. At the lowest temperatures, where the acyl-chain order parameter of the membrane has already drastically increased and the membrane achieves a liquid-ordered character, an efficient lipid sorting mechanism is no longer supported and aggregation of the peptide into small clusters prevails. We can conclude that palmitoyl/farnesyl dual-lipidated peptides do not associate with liquid-ordered or gel-like domains in phase-separated bilayer membranes. In particular, the study shows the interesting ability of the peptide to induce formation of fluid microdomains at physiologically relevant cholesterol concentrations, and this effect very much depends on the concentration of fluid vs ordered lipid molecules.     

Vesicle fission of giant unilamellar vesicles of liquid-ordered-phase membranes induced by amphiphiles with a single long hydrocarbon chain

Vesicle fissions are very important processes of biomembranes in cells, but their mechanisms are not clear and are controversial. Using the single giant unilamellar vesicle (GUV) method, we recently found that low concentrations (less than the critical micelle concentration (CMC)) of lysophosphatidylcholine (lyso-PC) induced the vesicle fission of GUVs of dipalmitoylphosphatidylcholine/cholesterol(6/4) (DPPC/chol(6/4)) membranes and sphingomyelin/cholesterol membranes (6/4) in the liquid-ordered (lo) phase. In this report, to elucidate its mechanism, we have investigated the effect of low concentrations (much less than their CMC) of other amphiphiles with a single long hydrocarbon chain (i.e., single long chain amphiphiles) on DPPC/chol(6/4) GUVs as well as the effect of the membrane composition on the lyso-PC-induced vesicle fission. We found that low concentrations of single long chain amphiphiles (lyosophosphatidic acid, octylglucoside, and sodium dodecyl sulfate) induced the shape change from a prolate to two spheres connected by a very narrow neck, indicating that the single long chain amphiphiles can be partitioned into the external monolayer in the lo phase of the GUV from the aqueous solution. As the single long chain amphiphile concentrations were increased, all of them induced vesicle fission of DPPC/chol(6/4) GUVs above their threshold concentrations. To elucidate the role of cholesterol in the single long chain amphiphile-induced vesicle fission, we investigated the effect of lyso-PC on GUVs of dioleoyl-PC (DOPC)/chol(6/4) membranes in the Lalpha phase; no vesicle fission occurred, indicating that cholesterol in itself did not play an important role in the vesicle fission. Finally, to elucidate the effect of the inclusion of DOPC in the lo-phase membrane of GUVs on the lyso-PC-induced vesicle fission of the DPPC/chol(6/4) GUV, we investigated the effect of low concentrations of lyso-PC on GUVs of DPPC/DOPC/chol membranes. With an increase in DOPC concentration in the membrane, the threshold concentration of lyso-PC increased. At and above 30 mol % DOPC, no vesicle fission occurred. On the basis of these results, we have proposed a hypothesis of the mechanism of the single long chain amphiphile-induced vesicle fission of a GUV of a lo-phase membrane.     

Visualization and Quantification of Transmembrane Ion Transport into Giant Unilamellar Vesicles

Transmembrane ion transporters (ionophores) are widely investigated as supramolecular agents with potential for biological activity. Tests are usually performed in synthetic membranes that are assembled into large unilamellar vesicles (LUVs). However transport must be followed through bulk properties of the vesicle suspension, because LUVs are too small for individual study. An alternative approach is described whereby ion transport can be revealed and quantified through direct observation. The method employs giant unilamellar vesicles (GUVs), which are 20–60 μm in diameter and readily imaged by light microscopy. This allows characterization of individual GUVs containing transporter molecules, followed by studies of transport through fluorescence emission from encapsulated indicators. The method provides new levels of certainty and relevance, given that the GUVs are similar in size to living cells. It has been demonstrated using a highly active anion carrier, and should aid the development of compounds for treating channelopathies such as cystic fibrosis.     

Multilamellar LipoCEST Agents Obtained from Osmotic Shrinkage of Paramagnetically Loaded Giant Unilamellar Vescicles (GUVs)

Moving from nano‐ to micro‐systems may not just be a matter of scale, but it might imply changes in the properties of the systems that can open new routes for the development of efficient MRI contrast agents. This is the case reported in the present paper, where giant liposomes (giant unilamellar vesicles, GUVs) loaded with Ln^III complexes have been studied as chemical exchange saturation transfer (CEST) MRI contrast agents. The comparison between nanosized liposomes (small unilamellar vesicles, SUVs) and GUVs sharing the same formulation led to differences that could not be accounted for only in terms of the increase in size (from 100–150 nm to 1–2 μm). Upon osmotic shrinkage, GUVs yielded a saturation‐transfer effect three order of magnitude higher than SUVs consistent with the increase in vesicles volume. Confocal microscopy showed that the shrinkage of GUVs resulted in multilamellar particles whereas SUVs are known to yield asymmetrical, discoidal shape.     

溶剂诱导翻转Pickering乳液用于原位循环使用酶催化剂

Separation and recycling of catalysts are crucial for realizing the objectives of sustainable and green chemistry but remain a great challenge, especially for enzyme biocatalysts. In this work, we report a new solvent-induced reversible inversion of Pickering emulsions stabilized by Janus mesosilica nanosheets (JMSNs), which is then utilized as a strategy for the in situ separation and recycling of enzymes. The interfacial active solid particle JMSNs is carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption experiments, Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA).The JMSNs are demonstrated to show order-oriented mesochannels with a large specific surface area, and the hydrophobic octylgroup is selectively modified on one side of the nanosheets. Furthermore, the inversion is found to be a fast process that is strongly dependent on the interfacial activity of the solid emulsifier JMSNs. Such a phase inversion is also a general process that can be realized in various oil/water phasic systems, including ethyl acetate-water, octane-water, and cyclohexane-water systems. By carefully analyzing the capacity of JMSNs with different surface wettabilities for phase inversion, a triphase contact angle (θ) close to 90° and a critical oil-water ratio of 1 : 2 are identified as the key factors to achieve solvent-induced phase inversion via a catastrophic phase inversion mechanism. Importantly, this reversible phase inversion is suitable for the separation and recycling of enzyme biocatalysts that are sensitive to changes in the reaction medium. Specifically, during the reaction, the organic substrates are dissolved in the oil droplets and the water-soluble catalysts are dispersed in the water phase, while a majority of the product is released into the upper oil phase and the enzyme catalyst is confined inside the water droplets in the bottom layer after phase inversion. The perpendicular mesochannels of JMSNs provide a highly accessible reaction interface, and their excellent interfacial activity allows for more than 10 rounds of consecutive phase inversions by simply adjusting the ratio of oil to water in the system. Using the enzymatic hydrolysis kinetic resolution of racemic acetate as an example, our Pickering emulsion system shows not only a 3-fold enhanced activity but also excellent recyclability. Because no sensitive chemical reagents are used in this phase inversion process, the intrinsic activities of the catalysts can be preserved even after seven cycles. The current study provides an alternative strategy for the separation and recycling of enzymes, in addition to revealing a new innovative application for Janus-type nanoparticles.     

Freezing or wrapping: the role of particle size in the mechanism of nanoparticle-biomembrane interaction

Understanding the interactions between nanoparticles (NPs) and biological matter is a high-priority research area because of the importance of elucidating the physical mechanisms underlying the interactions leading to NP potential toxicity as well as NP viability as therapeutic vectors in nanomedicine. Here, we use two model membrane systems, giant unilamellar vesicles (GUVs) and supported monolayers, to demonstrate the competition between adhesion and elastic energy at the nanobio interface, leading to different mechanisms of NP-membrane interaction relating to NP size. Small NPs (18 nm) cause a "freeze effect" of otherwise fluid phospholipids, significantly decreasing the phospholipid lateral mobility. The release of tension through stress-induced fracture mechanics results in a single microsize hole in the GUVs after interaction. Large particles (>78 nm) promote membrane wrapping, which leads to increased lipid lateral mobility and the eventual collapse of the vesicles. Electrochemical impedance spectroscopy on the supported monolayer model confirms that differently sized NPs interact differently with the phospholipids in close proximity to the electrode during the lipid desorption process. The time scale of these processes is in accordance with the proposed NP/GUV interaction mechanism.     

Effects of Reversible Chemical Reaction on Morphology and Domain Growth of Phase Separating Binary Mixtures with Viscosity Difference

Summary: The effects of a reversible chemical reaction on morphology and dynamics of phase separating binary mixtures with viscosity difference are studied by numerically solving modified time‐dependent Ginzburg‐Landau and Navier‐Stokes equations. Much more interesting morphologies are observed in the system due to the coupling of reversible chemical reaction and viscosity difference between two components. When the chemical reaction rate is relatively low, the impact of viscosity difference on morphologies is prominent, so that the resulting patterns are affected by both reversible chemical reaction and viscosity difference. However, increasing the chemical reaction rate weakens the impact of viscosity difference on morphologies. Similarly, increasing the chemical reaction rate also suppresses the effects of viscosity difference on domain growth dynamics, which is prominent at the early stage of phase separation when the chemical reaction rate is relatively low. For both cases with relatively low and high chemical reaction rates, the average domain size eventually attains an equilibrium value due to the competition between the mixing of reversible chemical reaction and demixing of phase separation.

Domain patterns of a critical system with ϕ_ini = 0, and Γ₁ = Γ₂ = 0.001.