Enhancement of Oxygen Evolution Activity of Nickel Oxyhydroxide by Electrolyte Alkali Cations

Herein, the effect of the alkali cation (Li⁺, Na⁺, K⁺, and Cs⁺) in alkaline electrolytes with and without Fe impurities is investigated for enhancing the activity of nickel oxyhydroxide (NiOOH) for the oxygen evolution reaction (OER). Cyclic voltammograms show that Fe impurities have a significant catalytic effect on OER activity; however, both under purified and unpurified conditions, the trend in OER activity is Cs⁺ > Na⁺ > K⁺ > Li⁺, suggesting an intrinsic cation effect of the OER activity on Fe‐free Ni oxyhydroxide. In situ surface enhanced Raman spectroscopy (SERS), shows this cation dependence is related to the formation of superoxo OER intermediate (NiOO^?). The electrochemically active surface area, evaluated by electrochemical impedance spectroscopy (EIS), is not influenced significantly by the cation. We postulate that the cations interact with the Ni?OO^? species leading to the formation of NiOO^??M⁺ species that is stabilized better by bigger cations (Cs⁺). This species would then act as the precursor to O₂ evolution, explaining the higher activity.     

Nickel Confined in the Interlayer Region of Birnessite: an Active Electrocatalyst for Water Oxidation

We report a synthetic method to enhance the electrocatalytic activity of birnessite for the oxygen evolution reaction (OER) by intercalating Ni²⁺ ions into the interlayer region. Electrocatalytic studies showed that nickel (7.7 atomic %)‐intercalated birnessite exhibits an overpotential (η) of 400 mV for OER at an anodic current of 10 mA cm^?2. This η is significantly lower than the η values for birnessite (η≈700 mV) and the active OER catalyst β‐Ni(OH)₂ (η≈550 mV). Molecular dynamics simulations suggest that a competition among the interactions between the nickel cation, water, and birnessite promote redox chemistry in the spatially confined interlayer region.     

Integrated Ultrafine Co0.85Se in Carbon Nanofibers: An Efficient and Robust Bifunctional Catalyst for Oxygen Electrocatalysis

Transition-metal selenides are emerging as alternative bifunctional catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR); however, their activity and stability are still less than desirable. Herein, ultrafine Co_0.85Se nanoparticles encapsulated into carbon nanofibers (CNFs), Co_0.85Se@CNFs, is reported as an integrated bifunctional catalyst for OER and ORR. This catalyst exhibits a low OER potential of 1.58 V vs. reversible hydrogen electrode (RHE) (E_{J=10, OER}) to achieve a current density (J) of 10 mA cm⁻² and a high ORR potential of 0.84 V vs. RHE (E_{J=−1, ORR}) to reach −1 mA cm⁻². Thus, the potential between E_{J=10, OER} and E_{J=−1, ORR} is only 0.74 V, indicating considerable bifunctional activity. The excellent bifunctionality can be attributed to high electronic conduction, abundant electrochemically active sites, and the synergistic effect of Co_0.85Se and CNFs. Furthermore, this Co_0.85Se@CNFs catalyst displays good cycling stability for both OER and ORR. This study paves a new way for the rational design of hybrid catalysts composed of transition-metal selenides and carbon materials for efficiently catalyzing OER and ORR.     

硫掺杂镍铁层状双氢氧化物的氧析出电催化性能

氧析出反应(OER)是裂解水、二氧化碳还原、以及可充电的锌空电池等许多技术中重要的半反应,但受限于其迟缓的反应动力学,开发高效的氧析出催化剂迫在眉睫.在OER出反应中,性能较好的非贵金属催化剂主要是第四周期过渡金属的一些化合物,如氧化物、氢氧化物、硫化物、硒化物、磷化物等等.在这些材料中,镍铁双金属化合物被认为是最优的氧析出材料,尤其是镍铁层状双氢氧化物(Ni Fe-LDHs)它拥有较大的电化学活性面积以暴露较多活性位点,同时镍铁两种过渡金属元素存在协同效应,使得其具有良好的催化性能.然而,这一类材料的OER性能仍然有优化的空间.研究表明,将硫化物氧化得到的氢氧化物会有少量的硫元素残留,这种硫残留的氢氧化物拥有十分优异的OER性能.为了进一步认识硫的引入对Ni Fe-LDHs的OER行为的影响,本文通过水热法合成了硫掺杂的Ni Fe-LDHs,考察了硫的掺杂量对催化剂性能的影响,验证了微量硫的存在对Ni Fe-LDHs的OER性能的贡献.扫描电镜图片显示,水热合成的催化剂是厚度为几十纳米的薄片,拥有较高的比表面积, X射线荧光光谱分析证明合成的硫掺杂Ni Fe-LDHs中镍铁的元素比例为4:1,而且硫的掺杂量并不影响催化剂的形貌和其中镍铁元素比.X射线光电子能谱分析表明,硫原子的引入使得铁原子结合能降低,即硫与铁的相互作用部分降低了铁的价态,这种硫和铁的相互作用能够优化OER反应中间体OH*与O*在铁活性位点上的吸附自由能,降低氧析出反应的过电势.电化学测试表明,拥有0.43%的硫掺杂Ni Fe-LDHs拥有最好的氧析出性能, 10 m A cm^-1下超电势仅有257 m V, Tafel斜率61.5 m V dec^-1.此后,随着硫掺杂量的提升,其性能先保持稳定,随后有所下降.在稳定测试中,硫掺杂的镍铁层状双氢氧化物在10 m Acm-1电流密度下循环30 h后过电位仅衰减14 m V.在对稳定性测试后的催化剂进行表征表明,催化剂发生了轻微了变形,但这对性能的影响不大.综上,本文提供了一种简便的通过非金属元素掺杂调控过渡金属氧化物的结构和电子态的方法,有望为设计高活性OER电催化剂提供新思路.     

A Permselective CeOx Coating To Improve the Stability of Oxygen Evolution Electrocatalysts

Highly active NiFeO_x electrocatalysts for the oxygen evolution reaction (OER) suffer gradual deactivation with time owing to the loss of Fe species from the active sites into solution during catalysis. The anodic deposition of a CeO_x layer prevents the loss of such Fe species from the OER catalysts, achieving a highly stable performance. The CeO_x layer does not affect the OER activity of the catalyst underneath but exhibits unique permselectivity, allowing the permeation of OH^? and O₂ through while preventing the diffusion of redox ions through the layer to function as a selective O₂‐evolving electrode. The use of such a permselective protective layer provides a new strategy for improving the durability of electrocatalysts.     

Atomically Dispersed Iron–Nitrogen Species as Electrocatalysts for Bifunctional Oxygen Evolution and Reduction Reactions

Rational design of non‐noble materials as highly efficient, economical, and durable bifunctional catalysts for oxygen evolution and reduction reactions (OER/ORR) is currently a critical obstacle for rechargeable metal‐air batteries. A new route involving S was developed to achieve atomic dispersion of Fe‐N_x species on N and S co‐decorated hierarchical carbon layers, resulting in single‐atom bifunctional OER/ORR catalysts for the first time. The abundant atomically dispersed Fe‐N_x species are highly catalytically active, the hierarchical structure offers more opportunities for active sites, and the electrical conductivity is greatly improved. The obtained electrocatalyst exhibits higher limiting current density and a more positive half‐wave potential for ORR, as well as a lower overpotential for OER under alkaline conditions. Moreover, a rechargeable Zn–air battery device comprising this hybrid catalyst shows superior performance compared to Pt/C catalyst. This work will open a new avenue to design advanced bifunctional catalysts for reversible energy storage and conversion devices.     

Double Perovskite LaFexNi1−xO3 Nanorods Enable Efficient Oxygen Evolution Electrocatalysis

Perovskite‐based electrocatalysts are one of the most promising materials for oxygen evolution reaction (OER), but their activity and durability are still far from desirable. Herein, we demonstrate that the double perovskite LaFe_xNi_1?xO₃ (LFNO) nanorods (NRs) can be adopted as highly active and stable OER electrocatalysts. The optimized LFNO‐II NRs with Ni/Fe ratio of 8:2 achieve a low overpotential of 302 mV at 10 mA cm^?2 and a small Tafel slope of 50 mV dec^?1, outperforming those of the commercial Ir/C. The LFNO‐II NRs also show high OER stability with slight current decrease after 20 h. The enhanced activity is explained by the improved surface area, tailored electronic structure as well as strong hybridization between O and Ni.     

The sum is more than its parts: stability of MnFe oxide nanoparticles supported on oxygen-functionalized multi-walled carbon nanotubes at alternating oxygen reduction reaction and oxygen evolution reaction conditions

Successful design of reversible oxygen electrocatalysts does not only require to consider their activity towards the oxygen reduction (ORR) and the oxygen evolution reactions (OER), but also their electrochemical stability at alternating ORR and OER operating conditions, which is important for potential applications in reversible electrolyzers/fuel cells or metal/air batteries. We show that the combination of catalyst materials containing stable ORR active sites with those containing stable OER active sites may result in a stable ORR/OER catalyst if each of the active components can satisfy the current demand of their respective reaction. We compare the ORR/OER performances of oxides of Mn (stable ORR active sites), Fe (stable OER active sites), and bimetallic Mn_0.5Fe_0.5 (reversible ORR/OER catalyst) supported on oxidized multi-walled carbon nanotubes. Despite the instability of Mn and Fe oxide for the OER and the ORR, respectively, Mn_0.5Fe_0.5 exhibits high stability for both reactions.

     

Effects of Metal Electrode Support on the Catalytic Activity of Fe(oxy)hydroxide for the Oxygen Evolution Reaction in Alkaline Media

FeO_xH_y and Fe-containing Ni/Co oxyhydroxides are the most-active catalysts for the oxygen evolution reaction (OER) in alkaline media. However, the activity of Fe sites appears strongly dependent on the electrode-substrate material and/or the elemental composition of the matrix in which it is embedded. A fundamental understanding of these interactions that modulate the OER activity of FeO_xH_y is lacking. We report the use of cyclic voltammetry and chronopotentiometry to assess the substrate-dependent activity of FeO_xH_y on a number of commonly used electrode substrates, including Au, Pt, Pd, Cu, and C. We also evaluate the OER activity and Tafel behavior of these metallic substrates in 1 M KOH aqueous solution with Fe³⁺ and other electrolyte impurities. We find that the OER activity of FeO_xH_y varies by substrate in the order Au>Pd≈Pt≈Cu>C. The trend may be caused by differences in the adsorption strength of the Fe oxo ion on the substrate, where a stronger adhesion results in more adsorbed Fe at the interface during steady-state OER and possibly a decreased charge-transfer resistance at the FeO_xH_y-substrate interface. These results suggest that the local atomic and electronic structure of [FeO₆] units play an important role in catalysis of the OER as the activity can be tuned substantially by substrate interactions.     

Electrodeposition of Defect-Rich Ternary NiCoFe Layered Double Hydroxides: Fine Modulation of Co3+ for Highly Efficient Oxygen Evolution Reaction

The low-cost, high-abundance and durable layered double hydroxides (LDHs) have been considered as promising electrocatalysts for oxygen evolution reaction (OER). However, the easy agglomeration of lamellar LDHs in the aqueous phase limits their practical applications. Herein, a series of ternary NiCoFe LDHs were successfully fabricated on nickel foam (NF) via a simple electrodeposition method. The as-prepared Ni(Co_0.5Fe_0.5)/NF displayed an unique nanoarray structural feature. It showed an OER overpotential of 209 mV at a current density of 10 mA cm⁻² in alkaline solution, which was superior to most systems reported so far. As evidenced by the XPS and XAFS results, such excellent performance of Ni(Co_0.5Fe_0.5)/NF was attributed to the higher Co³⁺/Co²⁺ ratio and more defects exposed, comparing with Ni(Co_0.5Fe_0.5)-bulk and Ni(Co_0.5Fe_0.5)-mono LDHs prepared by conventional coprecipitation method. Furthermore, the ratio of Co to Fe could significantly tune the Co electronic structure of Ni(Co_xFe_1-x)/NF composites (x=0.25, 0.50 and 0.75) and affect the electrocatalytic activity for OER, in which Ni(Co_0.5Fe_0.5)/NF showed the lowest energy barrier for OER rate-determining step (from O* to OOH*). This work proposes a facile method to develop high-efficiency OER electrocatalysts.     

Bifunctional Electrocatalysts for Overall Water Splitting from an Iron/Nickel‐Based Bimetallic Metal–Organic Framework/Dicyandiamide Composite

Pyrolysis of a bimetallic metal–organic framework (MIL‐88‐Fe/Ni)‐dicyandiamide composite yield a Fe and Ni containing carbonaceous material, which is an efficient bifunctional electrocatalyst for overall water splitting. FeNi₃ and NiFe₂O₄ are found as metallic and metal oxide compounds closely embedded in an N‐doped carbon–carbon nanotube matrix. This hybrid catalyst (Fe‐Ni@NC‐CNTs) significantly promotes the charge transfer efficiency and restrains the corrosion of the metallic catalysts, which is shown in a high OER and HER activity with an overpotential of 274 and 202 mV, respectively at 10 mA cm^?2 in alkaline solution. When this bifunctional catalyst was further used for H₂ and O₂ production in an electrochemical water‐splitting unit, it can operate in ambient conditions with a competitive gas production rate of 1.15 and 0.57 μL s^?1 for hydrogen and oxygen, respectively, showing its potential for practical applications.     

Ru-Doping Enhanced Electrocatalysis of Metal–Organic Framework Nanosheets toward Overall Water Splitting

An Ru-doping strategy is reported to substantially improve both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activity of Ni/Fe-based metal–organic framework (MOF) for overall water splitting. As-synthesized Ru-doped Ni/Fe MIL-53 MOF nanosheets grown on nickel foam (MIL-53(Ru-NiFe)@NF) afford HER and OER current density of 50 mA cm⁻² at an overpotential of 62 and 210 mV, respectively, in alkaline solution with a nominal Ru loading of ≈110 μg cm⁻². When using as both anodic and cathodic (pre-)catalyst, MIL-53(Ru-NiFe)@NF enables overall water splitting at a current density of 50 mA cm⁻² for a cell voltage of 1.6 V without iR compensation, which is much superior to state-of-the-art RuO₂-Pt/C-based electrolyzer. It is discovered that the Ru-doping considerably modulates the growth of MOF to form thin nanosheets, and enhances the intrinsic HER electrocatalytic activity by accelerating the sluggish Volmer step and improving the intermediate oxygen adsorption for increased OER catalytic activity.     

In Situ Transformation of Prussian-Blue Analogue-Derived Bimetallic Carbide Nanocubes by Water Oxidation: Applications for Energy Storage and Conversion

Using bimetallic Prussian blue analogue (PBA) as a precursor is effective for preparing electrocatalysts for the oxygen evolution reaction (OER); however, the role of these PBA-derived catalysts in the OER is still ambiguous. Herein, by simply controlling synthesis temperature, a bimetallic PBA-derived O,N-codoped Ni–Fe carbide, can be well tuned to optimize structure and OER performance. Importantly, by a series of ex situ and in situ investigations, real active species of NiFeO_xH_y are in situ formed on the surface during the OER, which reveals a “pre-catalyst” role of O,N-codoped Ni–Fe carbides. Furthermore, it has been successfully applied to highly efficient Zn–air batteries and outplays its RuO₂ counterpart. When applied to photoelectrocatalytic water oxidation as the co-catalyst, it improves the performance of the BiVO₄ photoanode by enhancing hole collecting and transporting ability. We believe this research not only provides a highly efficient and low-cost electrocatalyst for the OER, but also unveils the “pre-catalyst” role of PBA-derived materials in energy-storage and conversion devices.     

Enhanced Water Oxidation Activity on Ni,Co-Doped Fe2O3 (0001) Surface

Fe based oxides are considered as a promising catalyst for the oxygen evolution reaction (OER) due to their low cost and high stability. Here, based on density functional theory calculations, the electrocatalytic behaviors of pure and metal (Ni, Co) doped Fe-terminated Fe₂O₃(0001) are investigated. The potential-limiting step for OER is determined as the formation of O^* by dehydrogenating surface hydroxyl and it is suggested that the doping enhances the catalytic activity of Fe₂O₃(0001) by reducing the free energy change of rate limiting step on doped Ni or Co atom. Especially, the calculated over-potential of Co-doped Fe₂O₃ (0001) surface is about 0.63 eV on Co site, which is comparable with the theoretical over-potential of 0.56 eV for RuO₂.     

The adjacent Fe oxidation greatly enhancing OER activity on the Ni active site: S plays the role in optimizing local coordination and electronic structure

Oxygen evolution reaction (OER) is the bottleneck process of water splitting, and finding efficient, durable, low-cost, and earth-abundant electrocatalysts remains a major challenge. Here, FeNi₂-400-S is to be a promising OER electrocatalyst which exhibits a low overpotential of 214 mV at a current density of 10 mA/cm². X-ray analysis indicates that the introduction of S leads to a mismatch in bond distance between the metal-sulfur bond and the metal-metal bond, which can change the local electronic structure and favorably control the electronic oxidation. The active site position of FeNi₂-400-S has been further confirmed by DFT, which the 1OOH can stably adsorb on the Ni site of the oxidized Fe-Ni-S benefitting from the synergetic effect of the Ni site and the adjacent oxidized O on the Fe atom. Our findings demonstrate that the internal reconstruction of catalyst can make the optimization of local coordination and electronic structure, in which the in-situ generated vacancy can enable the outstanding OER performance.     

The Effect of Interlayer Anion Grafting on Water Oxidation Electrocatalysis: A Comparative Study of Ni- and Co-Based Brucite-Type Layered Hydroxides,Layered Double Hydroxides and Hydroxynitrate Salts

The urge for carbon-neutral green energy conversion and storage technologies has invoked the resurgence of interest in applying brucite-type materials as low-cost oxygen evolution reaction (OER) electrocatalysts in basic media. Transition metal layered hydroxides belonging to the brucite-type structure family have been shown to display remarkable electrochemical activity. Recent studies on the earth-abundant Fe³⁺ containing mössbauerite and Fe³⁺ rich Co−Fe layered oxyhydroxide carbonates have suggested that grafted interlayer anions might play a key role in OER catalysis. To probe the effect of such interlayer anion grafting in brucite-like layered hydroxides, we report here a systematic study on the electrocatalytic performance of three distinct Ni and Co brucite-type layered structures, namely, (i) brucite-type M(OH)₂ without any interlayer anions, (ii) LDHs with free interlayer anions, and (iii) hydroxynitrate salts with grafted interlayer anions. The electrochemical results indeed show that grafting has an evident impact on the electronic structure and the observed OER activity. Ni- and Co-hydroxynitrate salts with grafted anions display notably earlier formations of the electrocatalytically active species. Particularly Co-hydroxynitrate salts exhibit lower overpotentials at 10 mA cm⁻² (η=0.34 V) and medium current densities of 100 mA cm⁻² (η=0.40 V) compared to the corresponding brucite-type hydroxides and LDH materials.     

Ultrathin NiFeS nanosheets as highly active electrocatalysts for oxygen evolution reaction

The development of efficient and cost-effective oxygen evolution reaction (OER) electrocatalysts is crucial for clean energy conversion and storage devices, such as water-splitting, CO₂ reduction, and metal-air batteries. Herein, we report an efficient 2-dimensional OER catalyst of ultrathin nickel-iron sulfide nanosheets (NiFeS-NS). Dodecanethiol is employed in the synthesis, which prohibits the growth along the Z-axis, thus a nanosheet is obtained. The NiFeS-NS shows high OER catalytic activity, which only requires a small overpotential of 273 mV to achieve the OER current density of 10 mA/cm² in alkaline electrolyte, and almost no decay after 150 h of chronopotentiometry test. The high performance is attributed to the 2-dimensional structure, the synergistic effect from the Ni and Fe components which promotes the formation of the high valence Ni species, and the tuning effect from the in-situ generated sulfate doping. This work demonstrates the advantages of the 2-dimensional sulfides in electrocatalysis.     

Hydrothermal Synthesis of a rGO Nanosheet Enwrapped NiFe Nanoalloy for Superior Electrocatalytic Oxygen Evolution Reactions

Graphene‐based hybrid nanostructures possess many advantages in the field of electrochemical energy applications. In this work, a facile and efficient hydrothermal approach has been developed for the preparation of NiFe alloy nanoparticles/rGO hybrid nanostructures, in which the nanoparticles are well combined with rGO nanosheets and the size of the nanoparticles is about 100 nm. Moreover, the electrochemical oxygen evolution reaction (OER) tests confirmed that the obtained NiFe/rGO hybrid nanostructures possess notably higher activity than both the rGO‐free NiFe nanoparticles and pure Ni/rGO hybrids, and the optimal NiFe ratio is 2:1. The OER overpotential at 20 mA cm^?1?2 with Ni₂Fe/rGO is as low as 0.285 V, which is 96 mV lower than that of pure Ni/rGO hybrids. Meanwhile, the Ni₂Fe/rGO catalyst has excellent stability. Therefore, this work contributes a facile and efficient method to prepare a NiFe alloy nanoparticles/rGO hybrid structure for potential applications in the field of electrochemical energy devices, such as electrochemical water splitting cells, rechargeable metal/air batteries, etc.