Determination of the Enantiomeric Purity of Trelagliptin by Pre-Column Derivatization and Liquid Chromatography on a Chiral Stationary Phase

A precise and sensitive LC method for determination of enantiomeric purity of trelagliptin has been developed and validated. Pre-column derivatization was performed before separation. Baseline separation with a resolution factor >2.5 was accomplished within 10 min by use of a Chiralpak AD column (250 × 4.6 mm; particle size 5 µm) and n-hexane–2-propanol (90:10 v/v) as mobile phase at a flow rate of 1 mL min⁻¹. Eluted analytes were monitored by UV detection at 260 nm. The effects of mobile phase composition and temperature on enantiomeric selectivity and on resolution of enantiomers were thoroughly investigated. Calibration curves were plotted within the concentration range 0.005–2 mg mL⁻¹ (n = 12), and recoveries between 98.23 and 101.34 % were obtained, with relative standard deviation (RSD) <1.39 %. LOD and LOQ for the trelagliptin derivative were 1.51 and 5.03 µg mL⁻¹; those for its enantiomer were 1.49 and 4.94 µg mL⁻¹, respectively. The method was evaluated and validated by analysis of bulk samples of trelagliptin of different enantiomeric purity. It was demonstrated that the method was accurate, robust, and sensitive, and enabled practical analysis of real samples.

     

A validated chiral LC method for the enantiomeric separation of AT13148 on polysaccharide-based chiral stationary phase

A sensitive and accurate LC method for the determination of AT13148 enantiomeric purity has been developed and validated. Baseline separation with a resolution higher than 1.8 was accomplished within 15 min using a Chiralpak AD-H column (250 × 4.6 mm; particle size 5 μm) and n-hexane: 2-propanol: diethylamine (85:15:0.1, v/v) as mobile phase at a flow rate of 1 mL min^?1. Eluted analytes were monitored by UV absorption at 254 nm. The effects of mobile phase components, temperature and flow rate on enantiomeric selectivity and resolution of enantiomers were investigated. Calibration curves were plotted within the concentration range between 7 and 500 μg mL^?1 (n = 11), and the recoveries between 98.24 and 100.99% were obtained, with relative standard deviation lower than 1.32%. LOD and LOQ for AT13148 were 2.46 and 7.38 μg mL^?1 and for its enantiomer were 2.54 and 7.49 μg mL^?1, respectively. It was demonstrated that the developed method was accurate, robust and sensitive for the determination of enantiomeric purity of AT13148, especially for the analysis of bulk samples.     

Determination of AR-42 enantiomeric purity by HPLC on chiral stationary phase

A sensitive and accurate liquid chromatographic method for the determination of AR-42 enantiomeric purity has been developed and validated. Baseline separation with a resolution higher than 1.9 was accomplished within 10 min using a CHIRALPAK AD column (250 mm × 4.6 mm; particle size 5 μm) and n-hexane/2-propanol/diethylamine (75:25:0.1 v/v/v) as mobile phase at a flow rate of 1 mL min^?1. Eluted analytes were monitored by UV absorption at 260 nm. The effects of mobile phase components, temperature and flow rate on enantiomeric selectivity and resolution of enantiomers were investigated. Calibration curves were plotted within the concentration range between 0.001 and 0.5 mg mL^?1 (n = 10), and the recoveries between 98.23 and 101.87% were obtained, with relative standard deviation lower than 1.31%. Limit of detection and limit of quantitation for AR-42 were 0.39 and 1.28 μg mL^?1 and for its enantiomer were 0.36 and 1.19 μg mL^?1, respectively. It was demonstrated that the developed method was accurate, robust and sensitive for the determination of enantiomeric purity of AR-42, especially for the analysis of bulk samples.     

Determination of Enantiomeric Purity of GSK962040 Based on Liquid Chromatography Using Chiral Stationary Phase Combined with a Pre-column Derivatization Procedure

A sensitive and accurate LC method was developed and further validated for the determination of enantiomeric purity of GSK962040. Before separation, a pre-column derivatization procedure was performed. Baseline separation with a resolution higher than 1.9 was accomplished within 15 min using a Chiralpak AD-H (250 × 4.6 mm; particle size 5 μm) column, with n-hexane: 2-propanol (85:15 v/v) as mobile phase at a flow rate of 1 mL min^?1. The eluted analytes were subsequently detected with a UV detector at 260 nm. The effects of mobile phase components and temperature on enantiomeric selectivity as well as resolution of enantiomers were thoroughly investigated. The calibration curves were plotted within the concentration range between 4 and 200 μg mL^?1 (n = 8), and recoveries between 98.15 and 101.48% were obtained, with relative standard deviation (RSD) lower than 1.42%. The LOD and LOQ for the Boc-GSK962040 were 1.23 and 4.15 μg mL^?1 and for its enantiomer were 1.38 and 4.76 μg mL^?1, respectively. The developed method was also evaluated and validated by analyzing bulk samples with different enantiomeric ratios of GSK962040. It was demonstrated that the method was accurate, robust and sensitive, and also had practical utilities for real analysis.     

A Rapid and Sensitive LC Method for Determination of Diastereomeric Purity of Tenofovir Alafenamide

A rapid and sensitive LC method was developed and validated for the determination of diastereomeric purity of tenofovir alafenamide (GS-7340). Baseline separation with resolution >2.8 was achieved within 17 min on a CHIRALPAK AD-3 (250 × 4.6 mm; particle size 3 μm) column using n-hexane:2-propanol (60:40 v/v) as the mobile phase at a flow rate of 1 mL min^?1. The analytes were detected by UV absorbance at 260 nm. The effects of ethanol, 2-propanol, and temperature on diastereomeric selectivity and resolution of diastereomerism were evaluated. The method was extensively validated and proved to be robust. The recoveries were between 98.17 and 102.84 % with <1.93 % relative standard deviation. The limit of detection and limit of quantitation for GS-7339 were 0.77 and 2.56 μg mL^?1 and for GS-7340 were 0.61 and 2.04 μg mL^?1, respectively. This method was extensively proved to be accurate, stable, rapid, and sensitive for the determination of diastereomeric purity of tenofovir alafenamide (GS-7340) in bulk samples.     

Simultaneous Determination of Procaspase Activating Compound 1 and Permeability Markers in Intestinal Perfusion Samples and Application to a Rat Intestinal Absorption Study

A sensitive and simple HPLC method for simultaneous determination of PAC-1 (first procaspase-activating compound), phenol red, and permeability markers (carbamazepine and furosemide) in perfusion samples was developed and validated to assess intestinal absorption of PAC-1 using single-pass intestinal perfusion technique (SPIP) in rats. The chromatographic separation was carried out on a Kromasil C₁₈ column (150 mm × 4.6 mm, 5 μm) with acetonitrile–methanol–30 mmol L⁻¹ phosphate buffer (pH 3.0, 25:10:65, v/v/v) as mobile phase at a flow rate of 1.0 mL min⁻¹, and the wavelength of the UV detector was set at 281 nm. The calibration curves were linear in the ranges of 2.40–48.0 μg mL⁻¹ for PAC-1; 3.60–72.0 μg mL⁻¹ for carbamazepine; 3.20–64.0 μg mL⁻¹ for furosemide, and 4.80–96.0 μg mL⁻¹ for phenol red (r > 0.999). Both the intra- and inter-day precisions (RSD%) of all analytes were less than 6.8 % at three concentration levels, while accuracy ranged from 95.4 to 104.5 %. Data obtained in all method validation studies indicated that the method was suitable for the intended purpose. The effective permeability values (P _eff) considering water flux with the help of non-permeable marker phenol red was calculated to be 0.42 × 10⁻⁴, 0.62 × 10⁻⁴, 0.32 × 10⁻⁴ cm s⁻¹ for PAC-1; 0.72 × 10⁻⁴, 0.77 × 10⁻⁴, 0.52 × 10⁻⁴ cm s⁻¹ for carbamazepine; 0.20 × 10⁻⁴, 0.16 × 10⁻⁴, 0.12 × 10⁻⁴ cm s⁻¹ for furosemide in duodenum, jejunum and ileum, respectively. The P _eff value can be increased by co-perfusion with verapamil, indicating that absorption of PAC-1 is efficiently transported by P-glycoprotein (P-gp) in the gut wall.

     

LC Determination of Ketorolac in Human Plasma and Urine for Application to Pharmacokinetic Studies

A simple, specific and sensitive liquid chromatographic method has been developed for the assay of ketorolac in human plasma and urine. The clean-up of plasma and urine samples were carried out by protein precipitation procedure and liquid–liquid extraction, respectively. Separation was performed by a Waters sunfire C₁₈ reversed-phase column maintained at 35 °C. The mobile phase was a mixture of 0.02 M phosphate buffer (pH adjusted to 4.5 for plasma samples and to 3.5 for urine samples) and acetonitrile (70:30, v/v) at a flow rate of 1.0 mL min⁻¹. The UV detector was set at 315 nm. Nevirapine was used as an internal standard in the assay of urine sample. The method was validated over the concentration range of 0.05–8 and 0.1–10 μg mL⁻¹ for ketorolac in human plasma and urine, respectively. The limits of detection were 0.02 and 0.04 μg mL⁻¹ for plasma and urine estimation at a signal-to-noise ratio of 3. The limits of quantification were 0.05 and 0.1 μg mL⁻¹ for plasma and urine, respectively. The extraction recoveries were found to be 99.3 ± 4.2 and 80.3 ± 3.7% for plasma and urine, respectively. The intra-day and inter-day standard deviations were less than 0.5. The method indicated good performance in terms of specificity, linearity, detection and quantification limits, precision and accuracy. This assay demonstrated to be applicable for clinical pharmacokinetic studies.

     

LC Evaluation of In Vitro Release of AZT from Microemulsions

A reversed phase LC method was developed and validated to analyze the in vitro release of AZT from microemulsions. A mobile phase of acetonitrile:water (15:85) was used. The method validation showed good selectivity and linearity (r = 0.9993) for sample concentrations ranging from 0.6 to 100.0 μg mL⁻¹. The RSD values (0.7–4.3%) and percentage recovery (88.1–109.8%) were within acceptable limits. The limit of detection (LOD) and limit of quantitation (LOQ) were found to be 0.012 and 0.041 μg mL⁻¹. Quantitative analysis of the values obtained in the drug release assay indicates that the microemulsions used promote sustained release of AZT, which follows a Fickian diffusion mechanism.

     

LC Method for Quantification of ent-11α-Hydroxy-15-oxo-kaur-16-en-19-oic Acid in Rabbit Plasma: Validation and Application to a Pharmacokinetic Study

ent-11α-Hydroxy-15-oxo-kaur-16-en-19-oic acid (5F), a diterpenoid isolated from the Chinese herb Pteris semipinnata L, has been suggested to show antitumor properties. A simple and sensitive LC method was developed for the determination of 5F in rabbit plasma. The method involved liquid–liquid extraction using ethyl acetate under acidic conditions using naproxen as an internal standard. Separations were performed on a reversed-phase column with a mixture of 1% (v/v) glacial acetic acid and methanol (45:55, v/v) as mobile phase and UV detection was utilized at 242 nm. The calibration plot was linear in the range 0.20–10.0 μg mL⁻¹ (correlation coefficients r ² > 0.998). The detection limit was 0.20 μg mL⁻¹, mean extraction recovery was above 82%, intra-day precision of the method was less than 6.4%, and inter-day precision was better than 8.7%, respectively. The validated assay was found to be suitable for the pharmacokinetic study of 5F in rabbits.

     

HPLC and UPLC Methods for the Simultaneous Determination of Enalapril and Hydrochlorothiazide in Pharmaceutical Dosage Forms

High efficiency and less elution are the basic requirements of high-speed chromatographic separation. In this study, a new gradient reverse phase chromatographic methods were developed using HPLC and UPLC systems for simultaneous determination of enalapril maleate (ENL) and hydrochlorothiazide (HCZ) in pharmaceutical dosage forms. The chromatographic separations of ENL and HCZ were achieved on a Waters μ-Bondapak C 18, (300 × 3.9 mm, 10 μm) and Waters Acquity BEH C18 (100 × 2.1 mm, 1.7 μm) columns for HPLC within 5.30 min and UPLC within a short retention time of 1.95 min, respectively. A linear response was observed over the concentration range 0.270–399 μg mL⁻¹ of ENL, 0.260–399 μg mL⁻¹ of HCZ for HPLC system and 0.270–399 μg mL⁻¹ of ENL and 0.065–249 μg mL⁻¹ of HCZ for UPLC system. Also, limit of detection for ENL was 1.848 ng mL⁻¹ and 31.477 ng mL⁻¹ for HCZ, 2.804 ng mL⁻¹ for ENL and 2.943 ng mL⁻¹ for HCZ using HPLC and UPLC, respectively. The proposed methods were validated according to ICH guideline with respect to precision, accuracy, and linearity. Forced degradation studies were also performed for both compounds in bulk drug samples to demonstrate the specificity and stability indicating power of the HPLC method. Comparison of system performance with conventional HPLC was made with respect to analysis time, efficiency, and resolution.

     

An Improved and Validated LC Method for Resolution of Panthenol

An improved LC method was developed and validated for determination of enantiomeric purity of panthenol in bulk drugs. The method is based on derivatization of panthenol with 3,5-dinitrobenzoyl chloride. Baseline separation with resolution >2.7 was achieved within 20 min on Kromasil CHI-DMB (250 × 4.6 mm) column using n-hexane:ethanol (95:5 v/v) as mobile phase at a flow rate of 1.5 mL min^?1. The analytes were detected by their UV absorbance at 265 nm. The effects of ethanol, 2-propanol and temperature on enantioselectivity and resolution of enantiomers were evaluated. The method was extensively validated and proved to be robust. The recoveries were between 98.3 and 101.4% with <1.6% relative standard deviation. The regression equations for the derivatives of d-panthenol and l-panthenol were y ₁ = 18.01x ₁ ? 32.56 (r ₁ ²  = 0.9984) and y ₂ = 17.855x ₂ ? 28.16 (r ₂ ²  = 0.9990), respectively. The LOD and LOQ for the derivative of d-panthenol were 10.6 and 37.4 μg mL^?1 and for the derivative of l-panthenol were 12.1 and 40 μg mL^?1, respectively. The improved method was found to be simple, rapid, and sensitive for the determination of enantiomeric purity of panthenol in bulk drugs.     

Application of Multicriteria Methodology in the Development of Improved RP-LC-DAD for Determination of Rizatriptan and Its Degradation Products

A simple, rapid, and stability-indicating reversed-phase high-performance liquid chromatographic (LC) method for analysis for dutasteride has been successfully developed. Chromatography was performed on a 150 mm × 4.6 mm C₁₈ column with acetonitrile–water 60:40 (v/v) as isocratic mobile phase at 1.0 mL min⁻¹. Ultraviolet detection of dutasteride was at 210 nm. Its retention time was approximately 10 min and its peak was symmetrical. Response was a linear function of concentration over the range 0.2–1 μg mL⁻¹ (R ² = 0.997) and the limits of detection and quantitation were was 0.05 and 0.10 μg mL⁻¹, respectively. The method was validated for linearity, precision, repeatability, sensitivity, and selectivity. Selectivity was validated by subjecting dutasteride stock solution to photolytic, acidic, basic, oxidative, and thermal degradation. The peaks from the degradation products did not interfere with that from dutasteride. The method was used to quantify dutasteride in pharmaceutical preparations.

     

Development of a Stability-Indicating LC Assay Method for Determination of Chloroquine

A simple and rapid development of a stability-indicating LC method for determination of chloroquine diphosphate in the presence of its hydrolysis, oxidative and photolysis degradation products is described. Stress testing showed that chloroquine diphosphate was degraded under basic conditions and by photolytic treatment but was stable under the other stress conditions investigated. Separation of the drug from its degradation products was achieved with a Nova Pack C18 column, 0.01 M PIC B7 and acetonitrile (40:60 v/v) pH 3.6, as mobile phase. Response was linear over the range 0.08–5.70 μg mL⁻¹ (r = 0.996), with limits of detection and quantification (LOD and LOQ) of 0.17 and 0.35 μg mL⁻¹, respectively.

     

Development and Validation of a Stability-Indicating LC Method for the Determination of Rupatadine in Pharmaceutical Formulations

A reversed-phase liquid chromatography (RP-LC) method was validated for the determination of rupatadine in pharmaceutical dosage forms. The LC method was carried out on a Gemini C₁₈ column (150 mm × 4.6 mm I.D.), maintained at 30 °C. The mobile phase consisted of ammonium acetate buffer (pH 3.0; 0.01 M) with 0.05% of 1-heptanesulfonic acid–acetonitrile (71.5:28.5, v/v), run at a flow rate of 1.0 mL min⁻¹ and using photodiode array (PDA) detection at 242 nm. The chromatographic separation was obtained with retention time of 5.15 min, and was linear in the range of 0.5–400 μg mL⁻¹ (r ² = 0.9999). The specificity and stability-indicating capability of the method was proven through the degradation studies and showing also, that there was no interference of the excipients. The accuracy was 100.39% with bias lower than 0.58%. The limits of detection and quantitation were 0.01 and 0.5 μg mL⁻¹, respectively. Moreover, method validation demonstrated acceptable results for precision, sensitivity and robustness. The proposed method was applied for the analysis of pharmaceutical dosage forms assuring the therapeutic efficacy.

     

Enantiospecific HPLC and CE Methods for Separation and Determination of S-Darifenacin in Pharmaceutical Formulations

Two separation techniques were developed for the determination of S-(−)darifenacin (DAR) in the presence of its R-(+) isomer: The first method is high performance liquid chromatography (HPLC) and the second is capillary electrophoresis (CE). Chiral separation for chromatographic HPLC method development was carried out for S-DAR on Daicel CROWNPAK CR (+) (5 μm, 4.0 × 150 mm) column which contains (3,3-diphenyl-1,1-binaphthyl)-crown-6 coated onto a 5.5 μm silica support. The mobile phase system was aqueous acidic 70 % HClO₄ (pH 2.5): methanol in the proportion of 90:10 v/v. This current mobile phase was delivered at flow rate 0.8 mL min⁻¹ using UV detector adjusted at 286 nm. In CE method, the enantiomers were separated using 50 μm inner diameter fused-silica capillary cut to total lengths of 31.2 cm using 50 mM phosphate buffer as background electrolyte adjusted to pH 2.5 by triethanolamine. A wide range of cyclodextrins (CDs) were used such as highly sulfated α, γ CDs, hydroxyl propyl-β-CD and sulfobutyl ether-β-CD as chiral selectors. The effects of chiral additives regarding its concentration and content of organic modifier on the enantioseparation were investigated. Linear concentration ranges were from 2.5 to 50 and 40 to 300 μg mL⁻¹ with detection limits 0.67 and 12.28 μg mL⁻¹ for chromatographic HPLC and electrophoretic CE methods, respectively. The two methods were validated according to ICH guidelines with respect to linearity, accuracy, precision, LOQ, LOD and robustness. The suggested methods are suitable for separation and quantitation of S-DAR in tablets.

     

Stereoselective Determination of Ornidazole Enantiomers in Human Plasma and Urine Samples by Chiral LC: Application to Pharmacokinetic Study

A stereoselective liquid chromatographic method to determine the enantiomers of ornidazole in human plasma and urine has been developed and validated. After addition of the internal standard (naproxen), samples were acidified and extracted with diethyl ether. The separation was performed on a Chiralcel OB-H column, using hexane-ethanol- glacial acetic acid (94:6:0.08, v/v) as the mobile phase. The method was validated for specificity, linearity, sensitivity, precision, accuracy and stability. For each enantiomer of ornidazole, linear calibration curves were obtained over the concentration range of 0.16–20 μg mL⁻¹ in plasma and 0.32–20 μg mL⁻¹ in urine. For both enantiomers of ornidazole in plasma and urine, the coefficient of variation for precision were consistently less than 12% and accuracy were within ±14% in terms of relative error. Application of the method to a preliminary pharmacokinetic study showed that this validated method was qualified for the direct determination of ornidazole enantiomers in human plasma and urine.

     

Quantitative Analysis of Toosendanin in the Fruit of Melia toosendan Sieb. Et Zucc (Meliaceae) by High-Performance Liquid Chromatography Coupled with Charged Aerosol Detection

In this work, a simple and rapid high-performance liquid chromatography coupled with charged aerosol detector (HPLC-CAD) method was first developed for the quantitation of toosendanin, the major constituent of the dried fruit of Melia toosendan Sieb. Et Zucc. Samples were well separated on an Agilent ZOBAX SB C18 column (4.6 mm × 250 mm, 5 μm) by isocratic elution using 33 % acetonitrile and 67 % water containing 0.1 % formic acid (v/v) at the flow rate of 1.0 mL min⁻¹. The nitrogen inlet pressure of the charged aerosol detector (CAD) was 35 psi, and the nebulizer chamber temperature was 35 °C. The established method was well validated. Satisfactory linearity was achieved (r ² > 0.9997) in a relatively wide concentration range (5–500 μg mL⁻¹). The intra- and inter-day precisions, repeatability, and stability of the method were good with relative standard deviations (RSDs) of 1.05, 2.23, 2.39, and 2.03 %, respectively. The method also showed excellent accuracy with recovery rates of 97.42–101.87 %. Particularly, CAD showed much better sensitivity (LOQ 4 μg mL⁻¹) than evaporative light scattering detector (LOQ 100 μg mL⁻¹) for toosendanin’s determination. The established method was further applied in the quantitation of toosendanin in 39 batches of raw and stir-fried toosendan fructus. The HPLC-CAD method was rapid and accurate, and could be used for the routine analysis and quality control of toosendan fructus and its preparations.

     

Chiral Determination of Salbutamol,Salmeterol and Atenolol by Two-Dimensional LC–LC: Application to Urine Samples

A heart-cut two-dimensional high-performance liquid chromatography method for enantiomeric determination of salbutamol, salmeterol and atenolol in urine is presented. It involves the use of two separations in a liquid chromatography–liquid chromatography achiral–chiral coupling. Target compounds were previously separated in a primary column (Kinetex™ HILIC, 2.6 μm, 150 × 2.1 mm I.D.) with a mixture of MeOH:ACN:ammonium acetate buffer (5 mM, pH 6) 90:5:5 (v/v/v) as mobile phase at a flow rate of 0.40 mL min⁻¹. Enantiomeric separation was carried out by transferring peak of each compound through a switching valve to a vancomycin chiral column (Chirobiotic™ V, 2.6 μm, 150 × 2.1 mm I.D.) using MeOH:ammonium acetate buffer (2 mM, pH 4) 97:3 (v/v) as mobile phase at a flow rate of 0.50 mL min⁻¹. Ultraviolet detection was done at 227 nm. The method was applied to determine target analytes in urine samples after enzymatic hydrolysis with β-glucuronidase from Helix pomatia, followed by a solid-phase extraction procedure using Isolute^® HCX mixed-mode cartridges. Extraction recoveries ranged from 82 to 90 % in urine samples. Detection limits were 0.091–0.095 μg for each enantiomer of atenolol and between 0.058 and 0.076 and 0.18–0.14 μg for enantiomers of salbutamol and salmeterol, respectively (3 mL of urine). Linearity ranges were between 0.5 and 10 μg mL⁻¹. Intraday and interday reproducibilities of enantiomeric ratio and enantiomeric fraction, expressed as relative standard deviation, were between 1.9 and 9.0 %. The optimized method was successfully applied to the analysis of urine samples obtained from excretion studies in volunteers and in freeze-dried urine samples, containing urinary components with MW < 10,000 and components with MW > 10,000, spiked with different amounts of studied drugs.

     

Development of a Validated Stability-Indicating LC Assay and Stress Degradation Studies of Linezolid in Tablets

This paper describes the validation of an isocratic LC method for the assay of linezolid in tablets. Validation parameters such as linearity, precision, accuracy, specificity, limit of detection, limit of quantitation and robustness were determined. LC was carried out by reversed phase technique on an RP-18 column with a mobile phase composed of 1% acetic acid:methanol:acetonitrile (50:25:25, v/v/v). Linezolid and your combination drug product were exposed to acid, base, oxidation, dry heat and photolytic stress conditions. A linear response (r > 0.9999) was observed in the range of 8.0–20.0 μg mL⁻¹. The retention time of linezolid was 4.6 min. The method showed good recoveries and intra- and inter-day relative standard deviations were less than 1.0%. The LOD and LOQ were 0.21 and 0.63 μg mL⁻¹, respectively. The developed LC method for determination of related substances and assay determination of linezolid can be used to evaluate the quality of regular production samples. It can also be used to test the stability samples of linezolid.

     

Reversed-Phase Liquid Chromatographic Method for Determination of Daclatasvir Dihydrochloride and Study of Its Degradation Behavior

A simple and selective reversed-phase stability-indicating liquid chromatographic method has been developed and validated for the determination of daclatasvir in drug substance and drug product. Daclatasvir was subjected to acidic, alkaline, oxidative, thermal and photo-degradation study. The LC method was based on isocratic elution of daclatasvir and its degradation products on a reversed-phase C₁₈ Hypersil column using a mobile phase consisting of phosphate buffer (10 mM, 1 mL triethylamine L^?1): acetonitrile (60:40 v/v) at a flow rate of 2 mL min^?1. Quantitation was achieved with UV detection at 312 nm. Linearity, accuracy, and precision were found to be acceptable over the concentration range of 0.75–120 μg mL^?1, with regression coefficient value of 0.9999, and with limit of detection and quantitation of 0.148 and 0.447 μg mL^?1, respectively. Peak purity was checked for principle drug and its alkali induced degradation product, and the pathway of alkaline hydrolysis of daclatasvir was suggested by LC/MS.