Selective Photocatalytic Reduction of CO2 to CO Mediated by Silver Single Atoms Anchored on Tubular Carbon Nitride

Artificial photosynthesis is a promising strategy for converting carbon dioxide (CO₂) and water (H₂O) into fuels and value-added chemical products. However, photocatalysts usually suffered from low activity and product selectivity due to the sluggish dynamic transfer of photoexcited charge carriers. Herein, we describe anchoring of Ag single atoms on hollow porous polygonal C₃N₄ nanotubes (PCN) to form the photocatalyst Ag₁@PCN with Ag−N₃ coordination for CO₂ photoreduction using H₂O as the reductant. The as-synthesized Ag₁@PCN exhibits a high CO production rate of 0.32 μmol h⁻¹ (mass of catalyst: 2 mg), a high selectivity (>94 %), and an excellent stability in the long term. Experiments and density functional theory (DFT) reveal that the strong metal–support interactions (Ag−N₃) favor *CO₂ adsorption, *COOH generation and desorption, and accelerate dynamic transfer of photoexcited charge carriers between C₃N₄ and Ag single atoms, thereby accounting for the enhanced CO₂ photoreduction activity with a high CO selectivity. This work provides a deep insight into the important role of strong metal–support interactions in enhancing the photoactivity and CO selectivity of CO₂ photoreduction.     

In-Situ-Formed Potassium-Modified Nickel-Zinc Carbide Boosts Production of Higher Alcohols beyond CH4 in CO2 Hydrogenation

Ni-based catalysts have been widely studied in the hydrogenation of CO₂ to CH₄, but selective and efficient synthesis of higher alcohols (C₂₊OH) from CO₂ hydrogenation over Ni-based catalyst is still challenging due to successive hydrogenation of C1 intermediates leading to methanation. Herein, we report an unprecedented synthesis of C₂₊OH from CO₂ hydrogenation over K-modified Ni−Zn bimetal catalyst with promising activity and selectivity. Systematic experiments (including XRD, in situ spectroscopic characterization) and computational studies reveal the in situ generation of an active K-modified Ni−Zn carbide (K-Ni₃Zn₁C_0.7) by carburization of Zn-incorporated Ni⁰, which can significantly enhance CO₂ adsorption and the surface coverage of alkyl intermediates, and boost the C−C coupling to C₂₊OH rather than conventional CH₄. This work opens a new catalytic avenue toward CO₂ hydrogenation to C₂₊OH, and also provides an insightful example for the rational design of selective and efficient Ni-based catalysts for CO₂ hydrogenation to multiple carbon products.     

Accelerated Transfer and Spillover of Carbon Monoxide through Tandem Catalysis for Kinetics-boosted Ethylene Electrosynthesis

Cu-based catalysts have been widely applied in electroreduction of carbon dioxide (CO₂ER) to produce multicarbon (C₂₊) feedstocks (e.g., C₂H₄). However, the high energy barriers for CO₂ activation on the Cu surface is a challenge for a high catalytic efficiency and product selectivity. Herein, we developed an in situ *CO generation and spillover strategy by engineering single Ni atoms on a pyridinic N-enriched carbon support with a sodalite (SOD) topology (Ni-SOD/NC) that acted as a donor to feed adjacent Cu nanoparticles (NPs) with *CO intermediate. As a result, a high C₂H₄ selectivity of 62.5 % and an industrial-level current density of 160 mA cm⁻² at a low potential of −0.72 V were achieved. Our studies revealed that the isolated NiN₃ active sites with adjacent pyridinic N species facilitated the *CO desorption and the massive *CO intermediate released from Ni-SOD/NC then overflowed to Cu NPs surface to enrich the *CO coverage for improving the selectivity of CO₂ER to C₂H₄.     

Cu Atomic Chain Supported on Graphene Nanoribbon for Effective Conversion of CO2 to Ethanol

Cu catalysts are well-known for their good performance in CO₂ conversion. Compared to CO and CH₄ production, C₂ products have higher volumetric energy densities and are more valuable in industrial applications. In this work, we screened the catalytic ability of C₂ production on several 1D Cu atomic chain structures and find that Cu edge-decorated zigzag graphene nanoribbons (Cu−ZGNR) are capable of catalyzing CO₂ conversion to ethanol, and CH₃CH₂OH is the main C₂ product with a maximum free energy change of 0.60 eV. The planar tetracoordinate carbon structures in Cu-ZGNR provide unique chemical bonding features for catalytic reaction on the Cu atoms. Detailed mechanism analyses with transition states search show that CO* dimerization is favored against CHO* formation in the reaction. By adjusting the CO* coverage, the selectivity of the C₂ product can be enhanced owing to less pronounced steric effects for COCHO*, which is feasible under experimental conditions. This study expands the catalyst family for C₂ products from CO₂ based on nano carbon structures with new features.     

Wurtzite CuGaS2 with an In-Situ-Formed CuO Layer Photocatalyzes CO2 Conversion to Ethylene with High Selectivity

We present surface reconstruction-induced C−C coupling whereby CO₂ is converted into ethylene. The wurtzite phase of CuGaS_2. undergoes in situ surface reconstruction, leading to the formation of a thin CuO layer over the pristine catalyst, which facilitates selective conversion of CO₂ to ethylene (C₂H₄). Upon illumination, the catalyst efficiently converts CO₂ to C₂H₄ with 75.1 % selectivity (92.7 % selectivity in terms of R_electron) and a 20.6 μmol g⁻¹ h⁻¹ evolution rate. Subsequent spectroscopic and microscopic studies supported by theoretical analysis revealed operando-generated Cu²⁺, with the assistance of existing Cu⁺, functioning as an anchor for the generated *CO and thereby facilitating C−C coupling. This study demonstrates strain-induced in situ surface reconstruction leading to heterojunction formation, which finetunes the oxidation state of Cu and modulates the CO₂ reduction reaction pathway to selective formation of ethylene.     

MXene-Regulated Metal-Oxide Interfaces with Modified Intermediate Configurations Realizing Nearly 100% CO2 Electrocatalytic Conversion

Electrocatalytic CO₂ reduction via renewable electricity provides a sustainable way to produce valued chemicals, while it suffers from low activity and selectivity. Herein, we constructed a novel catalyst with unique Ti₃C₂T_x MXene-regulated Ag−ZnO interfaces, undercoordinated surface sites, as well as mesoporous nanostructures. The designed Ag−ZnO/Ti₃C₂T_x catalyst achieves an outstanding CO₂ conversion performance of a nearly 100% CO Faraday efficiency with high partial current density of 22.59 mA cm⁻² at −0.87 V versus reversible hydrogen electrode. The electronic donation of Ag and up-shifted d-band center relative to Fermi level within MXene-regulated Ag−ZnO interfaces contributes the high selectivity of CO. The CO₂ conversion is highly correlated with the dominated linear-bonded CO intermediate confirmed by in situ infrared spectroscopy. This work enlightens the rational design of unique metal-oxide interfaces with the regulation of MXene for high-performance electrocatalysis beyond CO₂ reduction.     

Designs of Tandem Catalysts and Cascade Catalytic Systems for CO2 Upgrading

Upgrading CO₂ into multi-carbon (C2+) compounds through the CO₂ reduction reaction (CO₂RR) offers a practical approach to mitigate atmospheric CO₂ while simultaneously producing high value chemicals. The reaction pathways for C2+ production involve multi-step proton-coupled electron transfer (PCET) and C−C coupling processes. By increasing the surface coverage of adsorbed protons (*H_ad) and *CO intermediates, the reaction kinetics of PCET and C−C coupling can be accelerated, thereby promoting C2+ production. However, *H_ad and *CO are competitively adsorbed intermediates on monocomponent catalysts, making it difficult to break the linear scaling relationship between the adsorption energies of the *H_ad/*CO intermediate. Recently, tandem catalysts consisting of multicomponents have been developed to improve the surface coverage of *H_ad or *CO by enhancing water dissociation or CO₂-to-CO production on auxiliary sites. In this context, we provide a comprehensive overview of the design principles of tandem catalysts based on reaction pathways for C2+ products. Moreover, the development of cascade CO₂RR catalytic systems that integrate CO₂RR with downstream catalysis has expanded the range of potential CO₂ upgrading products. Therefore, we also discuss recent advancements in cascade CO₂RR catalytic systems, highlighting the challenges and perspectives in these systems.     

Enhanced Carbon Monoxide Electroreduction to >1 A cm−2 C2+ Products Using Copper Catalysts Dispersed on MgAl Layered Double Hydroxide Nanosheet House-of-Cards Scaffolds

Cu catalysts are most apt for reducing CO₍₂₎ to multi-carbon products in aqueous electrolytes. To enhance the product yield, we can increase the overpotential and the catalyst mass loading. However, these approaches can cause inadequate mass transport of CO₍₂₎ to the catalytic sites, which will then lead to H₂ evolution dominating the product selectivity. Herein, we use a MgAl LDH nanosheet ‘house-of-cards’ scaffold to disperse CuO-derived Cu (OD-Cu). With this support-catalyst design, at −0.7 V_RHE, CO could be reduced to C₂₊ products with a current density (j_C2+) of −1251 mA cm⁻². This is 14× that of the j_C2+ shown by unsupported OD-Cu. The current densities of C₂₊ alcohols and C₂H₄ were also high at −369 and −816 mA cm⁻² respectively. We propose that the porosity of the LDH nanosheet scaffold enhances CO diffusion through the Cu sites. The CO reduction rate can thus be increased, while minimizing H₂ evolution, even when high catalyst loadings and large overpotentials are used.     

Redox Replacement of Silver on MOF-Derived Cu/C Nanoparticles on Gas Diffusion Electrodes for Electrocatalytic CO2 Reduction

Bimetallic tandem catalysts have emerged as a promising strategy to locally increase the CO flux during electrochemical CO₂ reduction, so as to maximize the rate of conversion to C−C-coupled products. Considering this, a novel Cu/C−Ag nanostructured catalyst has been prepared by a redox replacement process, in which the ratio of the two metals can be tuned by the replacement time. An optimum Cu/Ag composition with similarly sized particles showed the highest CO₂ conversion to C₂₊ products compared to non-Ag-modified gas-diffusion electrodes. Gas chromatography and in-situ Raman measurements in a CO₂ gas diffusion cell suggest the formation of top-bound linear adsorbed *CO followed by consumption of CO in the successive cascade steps, as evidenced by the increasingνC−H bands. These findings suggest that two mechanisms operate simultaneously towards the production of HCO₂H and C−C-coupled products on the Cu/Ag bimetallic surface.     

Efficient electroreduction of CO2 to C2+ products on CeO2 modified CuO

Electrocatalytic reduction of CO₂ into multicarbon (C₂₊) products powered by renewable electricity offers one promising method for CO₂ utilization and promotes the storage of renewable energy under an ambient environment. However, there is still a dilemma in the manufacture of valuable C₂₊ products between balancing selectivity and activity. In this work, cerium oxides were combined with CuO (CeO₂/CuO) and showed an outstanding catalytic performance for C₂₊ products. The faradaic efficiency of the C₂₊ products could reach 75.2% with a current density of 1.21 A cm⁻². In situ experiments and density functional theory (DFT) calculations demonstrated that the interface between CeO₂ and Cu and the subsurface Cu₂O coexisted in CeO₂/CuO during CO₂RR and two competing pathways for C–C coupling were promoted separately, of which hydrogenation of *CO to *CHO is energetically favoured. In addition, the introduction of CeO₂ also enhanced water activation, which could accelerate the formation rate of *CHO. Thus, the selectivity and activity for C₂₊ products over CeO₂/CuO can be improved simultaneously.

CO₂ can be efficiently converted into C₂₊ products on CeO₂ modified CuO catalysts and the faradaic efficiency could reach 75.2% with a current density of 1.21 A cm⁻².     

Interfacial Water Tuning by Intermolecular Spacing for Stable CO2 Electroreduction to C2+ Products

Electroreduction of CO₂ to multi-carbon (C₂₊) products is a promising approach for utilization of renewable energy, in which the interfacial water quantity is critical for both the C₂₊ product selectivity and the stability of Cu-based electrocatalytic sites. Functionalization of long-chain alkyl molecules on a catalyst surface can help to increase its stability, while it also tends to block the transport of water, thus inhibiting the C₂₊ product formation. Herein, we demonstrate the fine tuning of interfacial water by surface assembly of toluene on Cu nanosheets, allowing for sustained and enriched CO₂ supply but retarded water transfer to catalytic surface. Compared to bare Cu with fast cathodic corrosion and long-chain alkyl-modified Cu with main CO product, the toluene assembly on Cu nanosheet surface enabled a high Faradaic efficiency of 78 % for C₂₊ and a partial current density of 1.81 A cm⁻². The toluene-modified Cu catalyst further exhibited highly stable CO₂-to-C₂H₄ conversion of 400 h in a membrane-electrode-assembly electrolyzer, suggesting the attractive feature for both efficient C₂₊ selectivity and excellent stability.     

Selective CO2-to-C2H4 Photoconversion Enabled by Oxygen-Mediated Triatomic Sites in Partially Oxidized Bimetallic Sulfide

Selective CO₂ photoreduction into C₂ fuels under mild conditions suffers from low product yield and poor selectivity owing to the kinetic challenge of C−C coupling. Here, triatomic sites are introduced into bimetallic sulfide to promote C−C coupling for selectively forming C₂ products. As an example, FeCoS₂ atomic layers with different oxidation degrees are first synthesized, demonstrated by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Both experiment and theoretical calculation verify more charges aggregate around the introduced oxygen atom, which enables the original Co−Fe dual sites to turn into Co−O−Fe triatomic sites, thus promoting C−C coupling of double *COOH intermediates. Accordingly, the mildly oxidized FeCoS₂ atomic layers exhibit C₂H₄ formation rate of 20.1 μmol g⁻¹ h⁻¹, with the product selectivity and electron selectivity of 82.9 % and 96.7 %, outperforming most previously reported photocatalysts under similar conditions.     

Promoting CO2 Electroreduction to Multi-Carbon Products by Hydrophobicity-Induced Electro-Kinetic Retardation

Advancing the performance of the Cu-catalyzed electrochemical CO₂ reduction reaction (CO₂RR) is crucial for its practical applications. Still, the wettable pristine Cu surface often suffers from low exposure to CO₂, reducing the Faradaic efficiencies (FEs) and current densities for multi-carbon (C₂₊) products. Recent studies have proposed that increasing surface availability for CO₂ by cation-exchange ionomers can enhance the C₂₊ product formation rates. However, due to the rapid formation and consumption of *CO, such promotion in reaction kinetics can shorten the residence of *CO whose adsorption determines C₂₊ selectivity, and thus the resulting C₂₊ FEs remain low. Herein, we discover that the electro-kinetic retardation caused by the strong hydrophobicity of quaternary ammonium group-functionalized polynorbornene ionomers can greatly prolong the *CO residence on Cu. This unconventional electro-kinetic effect is demonstrated by the increased Tafel slopes and the decreased sensitivity of *CO coverage change to potentials. As a result, the strongly hydrophobic Cu electrodes exhibit C₂₊ Faradaic efficiencies of ≈90 % at a partial current density of 223 mA cm⁻², more than twice of bare or hydrophilic Cu surfaces.     

Effect of Halide Anions on the Electroreduction of CO2 to C2H4: A Density Functional Theory Study**

The halide anions present in the electrolyte improve the Faradaic efficiencies (FEs) of the multi-hydrocarbon (C₂₊) products for the electrochemical reduction of CO₂ over copper (Cu) catalysts. However, the mechanism behind the increased yield of C₂₊ products with the addition of halide anions remains indistinct. In this study, we analysed the mechanism by investigating the electronic structures and computing the relative free energies of intermediates formed from CO₂ to C₂H₄ on the Cu (100) facet based on density functional theory (DFT) calculations. The results show that formyl *CHO from the hydrogenation reaction of the adsorbed *CO acts as the key intermediate, and the C−C coupling reaction occurs preferentially between *CHO and *CO with the formation of a *CHO-CO intermediate. We then propose a free-energy pathway of C₂H₄ formation. We find that the presence of halide anions significantly decreases the free energy of the *CHOCH intermediate, and enhances desorption of C₂H₄ in the order of I⁻>Cl⁻>Br⁻>F⁻. Lastly, the obtained results are rationalized through Bader charge analysis.     

Surface Adsorbed Hydroxyl: A Double-Edged Sword in Electrochemical CO2 Reduction over Oxide-Derived Copper

Oxide-derived Cu (OD−Cu) featured with surface located sub-20 nm nanoparticles (NPs) created via surface structure reconstruction was developed for electrochemical CO₂ reduction (ECO₂RR). With surface adsorbed hydroxyls (OH_ad) identified during ECO₂RR, it is realized that OH_ad, sterically confined and adsorbed at OD−Cu by surface located sub-20 nm NPs, should be determinative to the multi-carbon (C₂) product selectivity. In situ spectral investigations and theoretical calculations reveal that OH_ad favors the adsorption of low-frequency *CO with weak C≡O bonds and strengthens the *CO binding at OD−Cu surface, promoting *CO dimerization and then selective C₂ production. However, excessive OH_ad would inhibit selective C₂ production by occupying active sites and facilitating competitive H₂ evolution. In a flow cell, stable C₂ production with high selectivity of ∼60 % at −200 mA cm⁻² could be achieved over OD−Cu, with adsorption of OH_ad well steered in the fast flowing electrolyte.     

Single Atom Bi Decorated Copper Alloy Enables C−C Coupling for Electrocatalytic Reduction of CO2 into C2+ Products**

Single atom alloy (SAA) catalysts have been recently explored for promotion of various heterogeneous catalysis, but it remains unexplored for selective electrocatalytic reduction of carbon dioxide (CO₂) into multi-carbon (C₂₊) products involving C−C coupling. Herein we report a single-atomic Bi decorated Cu alloy (denoted as BiCu-SAA) electrocatalyst that could effectively modulate selectivity of CO₂ reduction into C₂₊ products instead of previous C₁ ones. The BiCu-SAA catalyst exhibits remarkably superior selectivity of C₂₊ products with optimal Faradaic efficiency (FE) of 73.4 % compared to the pure copper nanoparticle or Bi nanoparticles-decorated Cu nanocomposites, and its structure and performance can be well maintained at current density of 400 mA cm⁻² under the flow cell system. Based on our in situ characterizations and density functional theory calculations, the BiCu-SAA is found to favor the activation of CO₂ and subsequent C−C coupling during the electrocatalytic reaction, as should be responsible for its extraordinary C₂₊ selectivity.     

Selective CO2 Reduction to Ethylene Mediated by Adaptive Small-molecule Engineering of Copper-based Electrocatalysts

Electrochemical CO₂ reduction reaction (CO₂RR) over Cu catalysts exhibits enormous potential for efficiently converting CO₂ to ethylene (C₂H₄). However, achieving high C₂H₄ selectivity remains a considerable challenge due to the propensity of Cu catalysts to undergo structural reconstruction during CO₂RR. Herein, we report an in situ molecule modification strategy that involves tannic acid (TA) molecules adaptive regulating the reconstruction of a Cu-based material to a pathway that facilitates CO₂ reduction to C₂H₄ products. An excellent Faraday efficiency (FE) of 63.6 % on C₂H₄ with a current density of 497.2 mA cm⁻² in flow cell was achieved, about 6.5 times higher than the pristine Cu catalyst which mainly produce CH₄. The in situ X-ray absorption spectroscopy and Raman studies reveal that the hydroxyl group in TA stabilizes Cu^δ+ during the CO₂RR. Furthermore, theoretical calculations demonstrate that the Cu^δ+/Cu⁰ interfaces lower the activation energy barrier for *CO dimerization, and hydroxyl species stabilize the *COH intermediate via hydrogen bonding, thereby promoting C₂H₄ production. Such molecule engineering modulated electronic structure provides a promising strategy to achieve highly selective CO₂ reduction to value-added chemicals.     

Selective CO2 Electroreduction to Ethylene and Multicarbon Alcohols via Electrolyte‐Driven Nanostructuring

Production of multicarbon products (C₂₊) from CO₂ electroreduction reaction (CO₂RR) is highly desirable for storing renewable energy and reducing carbon emission. The electrochemical synthesis of CO₂RR catalysts that are highly selective for C₂₊ products via electrolyte‐driven nanostructuring is presented. Nanostructured Cu catalysts synthesized in the presence of specific anions selectively convert CO₂ into ethylene and multicarbon alcohols in aqueous 0.1 m KHCO₃ solution, with the iodine‐modified catalyst displaying the highest Faradaic efficiency of 80 % and a partial geometric current density of ca. 31.2 mA cm^?2 for C₂₊ products at ?0.9 V vs. RHE. Operando X‐ray absorption spectroscopy and quasi in situ X‐ray photoelectron spectroscopy measurements revealed that the high C₂₊ selectivity of these nanostructured Cu catalysts can be attributed to the highly roughened surface morphology induced by the synthesis, presence of subsurface oxygen and Cu⁺ species, and the adsorbed halides.     

Nanosized cobalt-based catalyst prepared by supercritical phase condition for Fischer-Tropsch synthesis

A series of nanosized Co/Zn/Mn/K composite catalysts for Fischer-Tropsch synthesis (FTS) were prepared by supercritical fluid drying (SCFD) method and common drying (CD) method. The nanosized cobalt-based catalysts were characterized by XRD, TEM and BET techniques. Their catalytic performances were tested in a slurry-bed reactor under FTS reaction conditions. The drying and crystallization were carried out simultaneously during SCFD, therefore, the catalysts prepared by SCFD method have ideal structure and show the FTS performance superior to the others prepared by CD method. The FTS activity and selectivity were improved via adding Zn, Mn and K promoters, and less CH₄ and CO₂ as well as higher yield of C₅₊ products were achieved. The optimal performance of a 92% CO conversion and a 65% C₅₊ product yield was obtained over a catalyst with the component of Co/Zn/Mn/K = 100/50/10/7. Furthermore, the catalytic performance was studied under the conditions of liquid-phase and supercritical phase slurry-bed, and C₅₊ product yield were 57.4% and 65.4%, respectively. In summary, better catalytic performance was obtained using the nanosized catalyst prepared by SCFD method under supercritical reaction conditions, resulting in higher conversion of CO, less CO₂ byproduct, and higher yield of C₅₊ products.     

Electrocatalysts Derived from Copper Complexes Transform CO into C2+ Products Effectively in a Flow Cell

Electrochemical reactors that electrolytically convert CO₂ into higher-value chemicals and fuels often pass a concentrated hydroxide electrolyte across the cathode. This strongly alkaline medium converts the majority of CO₂ into unreactive HCO₃⁻ and CO₃²⁻ byproducts rather than into CO₂ reduction reaction (CO2RR) products. The electrolysis of CO (instead of CO₂) does not suffer from this undesirable reaction chemistry because CO does not react with OH⁻. Moreover, CO can be more readily reduced into products containing two or more carbon atoms (i. e., C₂₊ products) compared to CO₂. We demonstrate here that an electrocatalyst layer derived from copper phthalocyanine ( CuPc ) mediates this conversion effectively in a flow cell. This catalyst achieved a 25 % higher selectivity for acetate formation at 200 mA/cm² than a known state-of-art oxide-derived Cu catalyst tested in the same flow cell. A gas diffusion electrode coated with CuPc electrolyzed CO into C₂₊ products at high rates of product formation (i. e., current densities ≥200 mA/cm²), and at high faradaic efficiencies for C₂₊ production (FE_C2+; >70 % at 200 mA/cm²). While operando Raman spectroscopy did not reveal evidence of structural changes to the copper molecular complex, X-ray photoelectron spectroscopy suggests that the catalyst undergoes conversion to a metallic copper species during catalysis. Notwithstanding, the ligand environment about the metal still impacts catalysis, which we demonstrated through the study of a homologous CuPc bearing ethoxy substituents. These findings reveal new strategies for using metal complexes for the formation of carbon-neutral chemicals and fuels at industrially relevant conditions.