Silica Adsorbents with Well-Defined Peracetylated Thiosaccharide Surfaces: Synthesis and Use for Stereoselective Separations in RP and NP HPLC

New chiral silica adsorbents with well-defined peracetylated thiosaccharide (a.k.a. thiosaccharide) surfaces containing 1, 3, 7, and 13 glucose units have been synthesized through the reaction of trimethoxysilyl-derivatives of thiosaccharides with bare silica gel. As determined by FTIR, nitrogen adsorption, thermo-gravimetric analysis, and chemical analysis, the adsorbents prepared contained closely packed uniform monolayer surfaces of thiosaccharide groups grafted to silica. The chromatographic behavior of the thiosaccharide-silicas prepared has been evaluated in the HPLC separations of stereoisomers in both normal and reversed phase modes. With the exception of low grafted thiomaltodecatriose-silica, there was no effect of the size of thiosaccharide on the selectivity of the separations.     

Experimental Study of Model Bonded Stationary Phases for Liquid Chromatography I. Silica/Polyethyleneoxide

Abstract

Model bonded phases have been prepared by reaction of polyethyleneoxide of various molecular weights (200 < M < 5.10⁶) on silica.

The retention behavior of solutes on these bonded stationary phases for liquid chromatography depends on silica loadings, grafted molecule length, solute size and solvent nature. Different mechanisms such as dissolution effect in the grafted phase, adsorption on mineral support and steric exclusion due to the residual porosity of silica, are involved in the observed separations. An expression of elution volumes in relation with these mechanisms is proposed.

Chromatographic data and thermodynamic predictions are in good agreement.     

Experimental Study of Model Bonded Stationary Phases for Liquid Chromatography II. Silica/Polystyrene

Abstract

Mechanisms of separations performed on bonded phases in liquid chromatography are investigated by studying model grafted phases.

These phases are prepared by reaction of chlorinated silica with living anionic polystyrene of various molecular weights. Owing to thermodynamic predictions, an expression of the elution volume of various solutes on such packings and conditions for reverse-phase chromatography are proposed.     

New Inexpensive and Selective Sorbent Phases for Rapid Thin Layer Chromatographic Analysis of Metal Ions

Abstract

New sorbent phases have been developed by impregnating silica gel G with different inorganic salts for the analysis of metal ions by thin layer chroma to graphy in carboxylic acids media. Thin layers prepared from silica gel G impregnated with ammonium chloride or barium nitrate show the unusual selectivity towards metal ions in comparison to the thin layers prepared from plain silica gel G or silica gel impregnated with silver nitrate or aluminium nitrate. Many qualitative separations     

The influence of the structure of the surface of functional organosilicas on the adsorption of cholic acid

High-dispersity silica was modified by functional groups capable of protonating or carrying a constant positive charge. IR and UV spectroscopy, temperature-programmed thermogravimetry, pH metry, and quantitative analysis of grafted compounds were used to determine the structure of the surface of functional organosilicas. The adsorption of primary bile (cholic) acid on silica adsorbents and cholestiramine was studied. The adsorption of cholic acid from solutions with pH 2–8 was substantially higher on adsorbents with positively charged surfaces. The silica adsorbents synthesized were shown to have higher cholic acid adsorption parameters compared with adsorbents used in medicine.     

Interfacial property modulation of thermoresponsive polymer brush surfaces and their interaction with biomolecules

Dense poly(N-isopropylacrylamide) (PIPAAm) brushes were created on silica bead surfaces by surface-initiated atom transfer radical polymerization (ATRP). Interfacial properties of PIPAAm brushes were characterized by thermoresponisve interaction with biomolecules. The grafted amounts of PIPAAm on silica bead surfaces exceeded that from previously reported polymer-hydrogel-modified silica beads prepared by conventional radical polymerization by nearly 1 order of magnitude. Temperature-dependent chromatographic interactions with soluble analytes were modulated by changing the grafted PIPAAm chain lengths. Short PIPAAm-grafted silica beads produce insufficient dehydration and chain aggregation to separate steroids using weak hydrophobic interactions. In contrast, broad unresolved peaks were observed on silica beads column grafted with long PIPAAm chains due to steroid partitioning into thick, densely grafted PIPAAm brush layers. Thus, silica beads column grafted with PIPAAm chains of proper length can demonstrate baseline separation of steroids with relatively high resolution among the tested columns. Relatively longer retention times for steroid analytes were observed on all columns compared to those previously reported for other PIPAAm-grafted silica beads. This indicates that densely PIPAAm-grafted chains enable control of strong hydrophobic interactions with steroids by changing the column temperature. Densely grafted PIPAAm columns were also successful in separating two peptides into two peaks as the column temperature was increased to 40 degrees C. This provides an effective separation alternative for peptides using substantial hydrophobicity without modification of hydrophobic surfaces and/or low mobile phase pH. In conclusion, densely PIPAAm-grafted surfaces exhibit strong, reversible temperature-modulated hydrophobic interactions, facilitating baseline separations of steroids and peptides in aqueous milieu without changes in the mobile phase pH and high ionic strength.     

Ion Chromatographic Separation on Silica Grafted with Benzo-18-C-6 Crown Ether

Abstract

Benzo-18-C-6 crown ether has been grafted on silica gel modified with a spacer. By very carefull control of each step of the synthesis an exchanger for alkali and alkaline earth cations with high capacity and low equilibrium time has been prepared. The chromatographic behavior of alkali and alkaline earth metal halides on this benzo-18-C-6 crown ether modified silicas was investigated with water as the mobile phase. With alkali metal chlorides, very good separations are obtained in less than 30 minutes. With alkaline earth metal chlorides, very good separations are also obtained except for Ca²⁺/Mg²⁺. Separations are also observed with mixtures of alkali and alkaline earth cations. Moreover, a very efficient separation of anions is observed, partly as a result of the hydrophobic character of the exchanger.     

Thermo-responsive polymer brush-grafted porous polystyrene beads for all-aqueous chromatography

Poly(N-isopropylacrylamide) (PIPAAm) brush-grafted porous polystyrene beads with variable grafted polymer densities were prepared using surface-initiated atom transfer radical polymerization (ATRP) for applications in thermo-responsive chromatography. Utilization of these grafted beads as a stationary phase in aqueous chromatographic analysis of insulin provides a graft density-dependent analyte retention behavior. The separations calibration curve on PIPAAm-grafted polystyrene was obtained using pullulan standards and exhibited inflection points attributed to analyte diffusion into bead pores and partitioning into grafted PIPAAm brush surfaces. Presence of these inflection points supports a separation mechanism where insulin penetrates pores in polystyrene beads and hydrophobically interacts with PIPAAm brushes grafted within the pores. Control of PIPAAm brush graft density on polystyrene facilitates effective aqueous phase separation of peptides based on thermally modulated hydrophobic interactions with grafted PIPAAm within stationary phase pores. These results indicated that PIPAAm brush-grafted porous polystyrene beads prepared by surface-initiated ATRP was effective stationary phase of thermo-responsive chromatography for aqueous phase peptide separations.     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Preparation of Comb‐like Styrene Grafted Silica Nanoparticles

Abstract

Comb‐like polystyrene grafted silica nanoparticles (c‐PS‐SNs) were prepared by the following steps: (a) methacryloxypropyl silica nanoparticles (MPSNs) were used as macromonomer and free radical copolymerized with 4‐vinyl benzyl chloride (VBC) by a solution polymerization method; (b) the product of (A), poly(4‐vinyl benzyl chloride) grafted silica nanoparticle (PVBC‐SN) was separated and then used as a macroinitiator for the surface‐initiated atom transfer radical polymerization (SI‐ATRP) of styrene catalyzed by the complex of Cu(I)Br and 2,2′‐bipyridyl (bipy) in toluene solutions. The structurally well‐defined polymer chains were grown from the nanoparticle surfaces to yield particles composed of a silica core and a well defined, densely grafted outer comb‐like PS layer. A percentage of grafting (PG%) (the weight ratio of the PS grafted with that of the silica charged) of more than 80% was achieved after a polymerizing time of 5?hr.     

Effects of graft densities and chain lengths on separation of bioactive compounds by nanolayered thermoresponsive polymer brush surfaces

We have prepared various poly(N-isopropylacrylamide) (PIPAAm)-grafted silica bead surfaces through surface-initiated atom transfer radical polymerization (ATRP) by changing graft densities and brush chain lengths. The prepared surfaces were characterized by chromatographic analysis using the modified silica beads as chromatographic stationary phases. ATRP initiator (2-(m,p-chloromethylphenyl)ethyltrichlorosilane) density on silica bead surfaces was modulated by changing the feed composition of the self-assembled monolayers (SAMs) of mixed silane coupling agents consisting of ATRP initiator and phenethyltrichlorosilane on the surfaces. IPAAm was then polymerized on SAM-modified silica bead surfaces by ATRP in 2-propanol at 25 degrees C. The chain length of the grafted PIPAAm was controlled by simply changing the ATRP reaction time at constant catalyst concentration. The thermoresponsive surface properties of the PIPAAm-grafted silica beads were investigated by temperature-dependent elution behavior of hydrophobic steroids from the surfaces using Milli-Q water as a mobile phase. On the surfaces grafted with shorter PIPAAm chains, longer retention times for steroids were observed on sparsely grafted PIPAAm surfaces compared to dense PIPAAm brushes at low temperature, because of hydrophobic interactions between the exposed phenethyl groups of SAMs on silica surfaces and steroid molecules. Retention times for steroids on dilute PIPAAm chain columns decreased with temperature similarly to conventional reverse-phase chromatographic modes on octadecyl columns. This effect was due to limited interaction of solutes with the PIPAAm-grafted surfaces. Retention times for steroids on dilute PIPAAm brush surfaces with longer PIPAAm chains became greater above the PIPAAm transition temperature. At low-temperature regions, hydrated and expanded PIPAAm at low temperatures prevented hydrophobic interactions between the phenethyl group of SAMs on the silica bead surfaces and steroid molecules. Retention times for steroids on a dense PIPAAm brush column increased with temperature since solvated polymer segments within the dense brush layer undergo dehydration over a broad range of temperatures. In conclusion, PIPAAm graft density has a crucial influence on the elution behavior of steroids because of the interaction of analytes with silica bead interfaces, and because of the characteristic dehydration of PIPAAm in dense-pack brush surfaces.     

Dendrimer modified silica gel for anion exchange chromatography: synthesis, characterization and application

The novel grafted silica supports were investigated. The anion exchanger was prepared by chemical modification of a bare silica gel surface. The support was coated with a polymeric moiety formed by condensation polymerization of primary amine with diepoxide. The synthesized copolymer of methylamine (MA) and 1,4-butanedioldiglycidyl ether (BDDE) exhibited a dendrimer structure. The prepared materials were characterized by elemental analysis, FT-IR spectroscopy and solid state (13)C and (29)Si NMR CP-MAS spectroscopy. The porous structure of the adsorbents was investigated using the low temperature nitrogen adsorption (LTNA) method. It allows determination of the influence of the topology of packing materials on their chromatographic properties. Imaging was also carried out on the surfaces of the synthesized materials by scanning electron microscopy (SEM). The obtained stationary phase was applied in ion chromatography for the separation of inorganic anions (F(-), Cl(-), NO(2)(-), Br(-), NO(3)(-), HPO(4)(2-), SO(4)(2-), ClO(4)(-)). Bicarbonate buffer was used as a mobile phase.     

Designing of the centers for adsorption of bile acids on a silica surface

Silicas chemically modified with attached aminopropyl, imidazolyl, and trimethylsilyl groups, with adsorptive and coordinative grafted hemin were synthesized. Adsorption of some bile acids on the surface of hydroxylated silica, synthesized siliceous adsorbents and cholestyramine has been studied. It was found that the main contribution to the total adsorption is caused by electrostatic attraction between anions of bile acids and positively charged sites of the surface of modified silica and also by dispersion interactions between steroid skeleton of bile acids and functional groups of modified silicon dioxides. It was established that the kinetic parameters of adsorption and adsorptive capacity for all investigated siliceous adsorbents exceed similar characteristics for cholestyramine. The best of synthesized adsorbents is hemin-containing adsorbent IX, and the sequence of increase in its adsorptive capacity in relation to bile acids corresponds to the following series: I < III < II, IV < VI < V < VIII < VII < IX.     

Silica-Based Phenyl and Octyl Bifunctional Imidazolium as a New Mixed-Mode Stationary Phase for Reversed-Phase and Anion-Exchange Chromatography

In this study, octylbenzimidazolium-modified silica (BeImC8-Sil) was prepared by covalent attachment of 1-octylbenzimidazole to γ-chloropropyl silica. The synthesized materials were characterized by the elemental analysis, IR spectrum, and thermogravimetric analysis. Due to the introduction of phenyl and octyl groups on the quaternary imidazolium, the developed BeImC8-Sil column can function via both reversed-phase and anion-exchange retention mechanisms. The chromatographic properties of the synthesized material were investigated by the separations of polycyclic aromatic hydrocarbons, mono-substituted derivatives of benzene, anilines, and phenols, revealing the existence of multiple interactions, including hydrogen bonding, π–π stacking, electrostatic forces, and hydrophobic interactions in reversed-phase mode; inorganic and organic anions were also separated mainly through anion-exchange interaction. The proposed BeImC8-Sil is a promising mixed-mode stationary phase for the separation of complex samples in high-performance liquid chromatography.

     

Immobilized Stationary Phases for Hydrophobic Interaction Chromatography of Proteins

Immobilized stationary phases for hydrophobic interaction chromatography (HIC) of proteins are prepared by coating macroporous silica Daisogel of different porosity with hydrophobized cellulose derivatives. The polymer adsorbed on the silica surface afterwards was cross-linked with bifunctional compounds. A uniform polymer nanocoating was indicated using the nitrogen gas adsorption method BET and scanning electron microscopy. The absence of non-specific protein sorption of the synthesized adsorbents shows that the developed polymeric coating isolates silica surface from contact with the sorbate. The retention data of bovine serum albumin (BSA) in the HIC mode on different synthesized adsorbents were evaluated. It was shown that sorption capacity of such phases may vary over a wide range and depends mainly on the substitution degree of the immobilized polymer. The dynamic sorption capacity of BSA was up to 63 mg mL⁻¹. The results proved that the new stationary phases have significant promise for the separation and purification of proteins in the HIC mode.

     

Comparison of log k′ — solvent composition relationships in thinlayer and column chromatography for systems of the type: Silanized silica — water + methanol

Relationships between log k' values of polynuclear hydrocarbons and composition of water/methanol mixtures were determined for HPTLC on RP-18 silica and for HPLC using RP-2 silica. In spite of differences in the adsorbents used, a good correlation between HPLC and TLC parameters was found. In the TLC experiments, a sandwich tank with a modified solvent distributor was used. It has been reported that thin-layer chromatography is a good technique for the preliminary optimization of column chromatographic separations [1–5]. So far, the comparison of TLC and HPLC has been mainly restricted to silica as the adsorbent. Since TLC plates precoated with silanized adsorbents recently became commercially available, it seemed interesting to compare the chromatographic parameters obtained for the “reversed phase” systems with the two techniques (see also ref. 6).     

Synthesis and investigation of chemically modified silicas with the island structure of the grafted layer

Island structures on the chemically modified surface of silica are synthesized by the method of matrix prints. Dichlorosilicon phthalocyanine and copper naphthalocyanine were used as molecular templates. Two types of heterogeneous surfaces are prepared by this method: the islands of nonmodified silica on the trimethylsilylated silica (the first type) and the islands of aminopropyl silica on the esteric groups grafted on silica (the second type). The structure of the surfaces prepared is studied by ESR spectroscopy with the use of paramagnetic probes.     

Structural and Energetic Nonuniformities of Pyrocarbon-Mineral Adsorbents

Several series of pyrocarbon-mineral adsorbents (carbosils) were studied using the nitrogen adsorption method to compute structural and energetic parameters within the scope of overall adsorption isotherm approximation applying a regularization procedure with consideration for surface heterogeneity. A portion of pyrocarbon deposits (graphene clusters) fills mesopores of the oxide supports, but another portion represents relatively large nonporous pyrocarbon globules formed on the outer surfaces of the oxide matrices. Contributions of these two types of pyrocarbon deposits depend on the nature of oxide matrices and carbonized precursors. The characteristics of pyrocarbon formed on the silica (silica gel, fumed silica) surfaces differ from those for deposits prepared on the surfaces of titania/silica and alumina/silica or by the pyrolysis of metal acetylacetonates (Zr(AcAc)(4), TiO(AcAc)(2), Ni(AcAc)(2), Zn(AcAc)(2), Cr(AcAc)(3), Co(AcAc)(2)) on mesoporous silica gel. The structural and energetic characteristics estimated using the adsorption method with consideration for the adsorbent heterogeneity are fruitful for comparative analysis of the (1)H NMR spectra of water adsorbed on carbosils from the gas phase or unfrozen in the aqueous suspensions at T < 273 K. Copyright 2001 Academic Press.     

Immobilization of RAFT agents on silica nanoparticles utilizing an alternative functional group and subsequent surface‐initiated RAFT polymerization

Silica–polystyrene core‐shell particles were successfully prepared by surface‐mediated reversible addition fragmentation chain transfer (RAFT) polymerization of styrene monomer from the surfaces of the silica‐supported RAFT agents. Initially, macro‐RAFT agents were synthesized by RAFT polymerization of γ‐methacryloxypropyltrimethoxysilane (MPS) in the presence of chain transfer agents (CTAs). Immobilization of CTAs onto the silica surfaces was then performed by reacting silica with macro‐RAFT agents via a silane coupling. Grafting of polymer onto silica forms core‐shell nanostructures and shows a sharp contrast between silica core and polymer shell in the phase composition. The thickness of grafted‐polymer shell and the diameter of core‐shell particles increase with the increasing ratio of monomer to silica. A control experiment was carried out by conventional free radical emulsion copolymerization of MPS‐grafted silica and styrene under comparable conditions. The resulting data provide further insight into the chemical composition of grafted‐polymers that are grown from the silica surface through RAFT process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 467–484, 2009