A Carbocationic Triarylmethane-Based Porous Covalent Organic Network

A thermally stable carbocationic covalent organic network (CON), named RIO-70 was prepared from pararosaniline hydrochloride, an inexpensive dye, and triformylphloroglucinol in solvothermal conditions. This nanoporous organic material has shown a specific surface area of 990 m² g⁻¹ and pore size of 10.3 Å. The material has CO₂ uptake of 2.14 mmol g⁻¹ (0.5 bar), 2.7 mmol g⁻¹ (1 bar), and 6.8 mmol g⁻¹ (20 bar), the latter corresponding to 3 CO₂ molecules adsorbed per pore per sheet. It is shown to be a semiconductor, with electrical conductivity (σ) of 3.17×10⁻⁷ S cm⁻¹, which increases to 5.26×10⁻⁴ S cm⁻¹ upon exposure to I₂ vapor. DFT calculations using periodic conditions support the findings.     

Dopant-Induced Electronic States Regulation Boosting Electroreduction of Dilute Nitrate to Ammonium

Electrochemically converting NO₃⁻ into NH₃ offers a promising route for water treatment. Nevertheless, electroreduction of dilute NO₃⁻ is still suffering from low activity and/or selectivity. Herein, B as a modifier was introduced to tune electronic states of Cu and further regulate the performance of electrochemical NO₃⁻ reduction reaction (NO₃RR) with dilute NO₃⁻ concentration (≤100 ppm NO₃⁻−N). Notably, a linear relationship was established by plotting NH₃ yield vs. the oxidation state of Cu, indicating that the increase of Cu⁺ content leads to an enhanced NO₃⁻-to-NH₃ conversion activity. Under a low NO₃⁻−N concentration of 100 ppm, the optimal Cu(B) catalyst displays a 100 % NO₃⁻-to-NH₃ conversion at −0.55 to −0.6 V vs. RHE, and a record-high NH₃ yield of 309 mmol h⁻¹ g_cat⁻¹, which is more than 25 times compared with the pristine Cu nanoparticles (12 mmol h⁻¹ g_cat⁻¹). This research provides an effective method for conversion of dilute NO₃⁻ to NH₃, which has certain guiding significance for the efficient and green conversion of wastewater in the future.     

Mass spectrometric study of simple main group molecules and ions important in atmospheric processes

Recent mass spectrometric studies of simple inorganic species (both charged and neutral) of main-group elements are reviewed, focusing attention on radicals and ions of interest to the chemistry of the atmosphere and its pollution. The examples illustrated concern the detection of HO₃, hydrogen trioxide, the O₂/O₃ isotope exchange and its charged intermediate O₅⁺, the reactions promoted by ionization of ozone/halocarbon mixtures in atmospheric gases, the ion chemistry of NO_x oxides, and that of elemental chlorine and chlorine fluoride. Among the results of specific interest to gas-phase ion chemistry, the examples illustrated concern the intracluster ligand-switching reactions in ternary NO⁺ complexes, the NO₂⁺ reactivity towards ethylene and acetylene, the gas-phase basicity of Cl₂, the formation and characterization of Cl₂X⁺ ions (X = Cl, F) and of [H₃C-Cl-Cl]⁺, a new isomer of protonated dichloromethane.     

l‐Methioninium chloride and l‐seleno­methioninium chloride at 103 K

The crystal structures of the title compounds, (S)‐1‐carboxy‐3‐(methyl­sulfanyl)­propanaminium chloride, C₅H₁₂NO₂S⁺·Cl⁻, and (S)‐1‐carboxy‐3‐(methyl­selanyl)­propanaminium chloride, C₅H₁₂NO₂Se⁺·Cl⁻, are isomorphous. The proton­ated l ‐methionine and l ‐seleno­methionine mol­ecules have almost identical conformations and create very similar contacts with the Cl⁻ anions in the crystal structures of both compounds. The amino acid cations and the Cl⁻ anions are linked viaN—H⋯Cl⁻ and O—H⋯Cl⁻ hydrogen bonds.     

A kinetic study of chlorine radical reactions with ketones by laser photolysis technique

Rate coefficients for reactions between Cl radicals and four ketones were determined at 294 ± 1 K with a relative rate method using a laser photolysis technique. The experiments were conducted in synthetic air in a flow system at atmospheric pressure. A mixture of Cl₂/ClONO₂ was photolyzed and the formation of NO₃ through the reaction Cl + ClONO₂ → Cl₂ + NO₃ was measured with and without ketones in the reaction mixture. The NO₃ radical concentration was measured by optical absorption using a diode laser as the light source. The rate coefficients for the Cl-ketone reactions could then be evaluated. The following rate coefficients were obtained (in units of cm³ molecule⁻¹ s⁻¹): cyclohexanone (7.00 ± 1.15) × 10⁻¹¹; cyclopentanone (4.76 ± 0.33) × 10⁻¹¹; acetone (1.69 ± 0.32) × 10⁻¹²; and 2,3-butanedione (7.62 ± 1.66) × 10⁻¹³. The accuracy of the method employed was tested by using the well-studied reaction between Cl and methane and a rate coefficient of (9.37 ± 1.04) × 10⁻¹⁴ cm³ molecule⁻¹ s⁻¹ was obtained, which is in good agreement with previous work. The errors are at the 95% confidence level. The results in this work indicate that a carbonyl group in a ketone lowers the reactivity towards α-hydrogen abstraction by Cl radicals, compared to the corresponding Cl-alkane reactions. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 195–201, 1997.     

Dual-Plasmon Resonance Coupling Promoting Directional Photosynthesis of Nitrate from Air

Photocatalysis, particularly plasmon-mediated photocatalysis, offers a green and sustainable approach for direct nitrogen oxidation into nitrate under ambient conditions. However, the unsatisfactory photocatalytic efficiency caused by the limited localized electromagnetic field enhancement and short hot carrier lifetime of traditional plasmonic catalysts is a stumbling block to the large-scale application of plasmon photocatalytic technology. Herein, we design and demonstrate the dual-plasmonic heterojunction (Bi/Cs_xWO₃) achieves efficient and selective photocatalytic N₂ oxidation. The yield of NO₃⁻ over Bi/Cs_xWO₃ (694.32 μg g⁻¹ h⁻¹) are 2.4 times that over Cs_xWO₃ (292.12 μg g⁻¹ h⁻¹) under full-spectrum irradiation. The surface dual-plasmon resonance coupling effect generates a surge of localized electromagnetic field intensity to boost the formation efficiency and delay the self-thermalization of energetic hot carriers. Ultimately, electrons participate in the formation of ⋅O₂⁻, while holes involve in the generation of ⋅OH and the activation of N₂. The synergistic effect of multiple reactive oxygen species drives the direct photosynthesis of NO₃⁻, which achieves the overall-utilization of photoexcited electrons and holes in photocatalytic reaction. The concept that the dual-plasmon resonance coupling effect facilitates the directional overall-utilization of photoexcited carriers will pave a new way for the rational design of efficient photocatalytic systems.     

Heterogeneous Electrofreezing of Super-Cooled Water on Surfaces of Pyroelectric Crystals is Triggered by Trigonal Planar Ions

Electrofreezing experiments of super-cooled water (SCW) with different ions, performed directly on the charged hemihedral faces of pyroelectric LiTaO₃ and AgI crystals, in the presence and in the absence of pyroelectric charge are reported. It is demonstrated that bicarbonate (HCO₃⁻) ions elevate the icing temperature near the positively charged faces. In contrast, the hydronium (H₃O⁺) slightly reduces the icing temperature. Molecular dynamics simulations suggest that the hydrated trigonal planar HCO₃⁻ ions self-assemble with water molecules near the surface of the AgI crystal as clusters of slightly different configuration from those of the ice-like hexagons. These clusters, however, have a tendency to serve as embryonic nuclei for ice crystallization. Consequently, we predicted and experimentally confirmed that the trigonal planar ions of NO₃⁻ and guanidinium (Gdm⁺), at appropriate concentrations, elevate the icing temperature near the positive and negative charged surfaces, respectively. On the other hand, the Cl⁻ and SO₄²⁻ ions of different configurations reduce the icing temperature.     

Highly sensitive fluorescence detection of chloride ion in aqueous solution with Ag-modified porous g-C3N4 nanosheets

The porous g-C₃N₄ (PCN) nanosheets are successfully synthesized and further modified with nano-sized Ag by a simple wet-chemical process. Interestingly, the Ag-modified porous g-C₃N₄ (Ag-PCN) nanosheets exhibit competitive fluorescence detection performance of chloride ion (Cl⁻) in aqueous solution. Under the optimized conditions, the concentration of Cl⁻ could be quantitative analyzed with the Ag-PCN in a wide detection range from 0.5 mmol/L to 0.1 mol/L, with a low detection limitation of 0.06 mmol/L. It is confirmed that the fluorescence of PCN could be effectively decayed by the photoinduced charge transfer via the adsorbed Cl⁻ for trapping holes, mainly by means of the time-resolved fluorescence and surface photovoltage spectra. The porous structure and modified Ag promote the adsorption of Cl⁻ on resulting Ag-PCN, leading to excellent fluorescence detection for Cl⁻. This work provides a feasible route to develop a fluorescence detection of Cl⁻ with g-C₃N₄ nanosheets in environment water.     

Novel Copolymers of Styrene. 8. Some Ring-Disubstituted Ethyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, ring-disubstituted ethyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₂H₅ (where R is 3-Br-4-CH₃O, 5-Br-2-CH₃O, 3-F-2- CH₃, 3-F-4-CH₃, 4-F-2-CH₃, 4-F-3-CH₃, 5-F-2-CH₃, 2-Cl-5-NO₂, 2-Cl-6-NO₂, 4-Cl-3- NO₂) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-disubstituted benzaldehydes and ethyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 5-Br-2-CH₃O (1.02) > 4-Cl-3-NO₂ (0.93) > 3-F-4-CH₃ (0.81) > 2-Cl-6-NO₂ (0.77) > 2-Cl-5-NO₂ (0.71) > 3-Br-4-CH₃O (0.66) > 4-F-3-CH₃ (0.60) > 3-F-2-CH₃ (0.38) > 4-F-2-CH₃ (0.31) > 5-F-2-CH₃ (0.16). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 250–500°C range with residue (2–26% wt.), which then decomposed in the 500–800°C range.     

Imidazolium-Functionalized Chemically Robust Ionic Porous Organic Polymers (iPOPs) toward Toxic Oxo-Pollutants Capture from Water

Fabricating new and efficient materials aimed at containment of water contamination, in particular removing toxic heavy metal based oxo-anions (e. g. CrO₄²⁻, TcO₄⁻) holds paramount importance. In this work, we report two new highly stable imidazolium based ionic porous organic polymers (iPOPs) decorated with multiple interaction sites along with electrostatics driven adsorptive removal of such oxo-anions from water. Both the iPOPs (namely, iPOP-3 and iPOP-4) exhibited rapid sieving kinetics and very high saturation uptake capacity for CrO₄²⁻ anions (170 and 141 mg g⁻¹ for iPOP-3 and iPOP-4 respectively) and ReO₄⁻ (515.5 and 350.3 mg g⁻¹ for iPOP-3 and iPOP-4 respectively), where ReO₄⁻ anions being the non-radioactive surrogative counterpart of radioactive TcO₄⁻ ions. Noticeably, both iPOPs showed exceptional selectivity towards CrO₄²⁻ and ReO₄⁻ even in presence of several other concurrent anions such as Br⁻, Cl⁻, SO₄²⁻, NO₃⁻ etc. The theoretical binding energy calculations via DFT method further confirmed the preferential interaction sites as well as binding energies of both iPOPs towards CrO₄²⁻ and ReO₄⁻ over all other competing anions which corroborates with the experimental high capacity and selectivity of iPOPs toward such oxo-anions.     

In Situ Pyrolysis Tracking and Real-Time Phase Evolution: From a Binary Zinc Cluster to Supercapacitive Porous Carbon

The in situ tracking of the pyrolysis of a binary molecular cluster [Zn₇(μ₃-CH₃O)₆(L)₆][ZnLCl₂]₂ is presented with one brucite disk and two mononuclear fragments (L=mmimp: 2-methoxy-6-((methylimino)-methyl)phenolate) to porous carbon using TG-MS from 30 to 900 °C. Following up the spilled gas product during the decomposed reaction of zinc cluster along the temperature rising, and in conjunction with XRD, SEM, BET and other materials characterization, where three key steps were observed: 1) cleavage of the bulky external ligand; 2) reduction of ZnO and 3) volatilization of Zn. The real-time-dependent phase-sequential evolution of the remaining products and the processing of pore forming template transformation are proposed simultaneously. The porous carbon structure featuring a uniform nano-sized pore distribution synthesized at 900 °C with the highest surface area of 1644 m² g⁻¹ and pore volume of 0.926 cm³ g⁻¹ exhibits the best known capacitance of 662 F g⁻¹ at 0.5 A g⁻¹.     

Cover Feature: Effects of Microhydration on the Mechanisms of Hydrolysis and Cl− Substitution in Reactions of N2O5 and Seawater (ChemPhysChem 5/2023)

The reaction of N₂O₅ at atmospheric interfaces has recently received considerable attention due to its importance in atmospheric chemistry. N₂O₅ reacts preferentially with Cl⁻ to form ClNO₂/NO₃⁻ (Cl⁻ substitution), but can also react with H₂O to form 2HNO₃ (hydrolysis). In this paper, we explore these competing reactions in a theoretical study of the clusters N₂O₅/Cl⁻/nH₂O (n=2–5), resulting in the identification of three reaction motifs. First, we uncovered an S_N2-type Cl⁻ substitution reaction of N₂O₅ that occurs very quickly due to low barriers to reaction. Second, we found a low-lying pathway to hydrolysis via a ClNO₂ intermediate (two-step hydrolysis). Finally, we found a direct hydrolysis pathway where H₂O attacks N₂O₅ (one-step hydrolysis). We find that Cl⁻ substitution is the fastest reaction in every cluster. Between one-step and two-step hydrolysis, we find that one-step hydrolysis barriers are lower, making two-step hydrolysis (via ClNO₂ intermediate) likely only when concentrations of Cl⁻ are high.     

High Ammonia Uptake of a Metal–Organic Framework Adsorbent in a Wide Pressure Range

Although numerous porous adsorbents have been investigated for NH₃ capture applications, these materials often exhibit insufficient NH₃ uptake, low NH₃ affinity at the ppm level, and poor chemical stability against wet NH₃ conditions. The NH₃ capture properties of M₂(dobpdc) complexes (M=Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, and Zn²⁺; dobpdc⁴⁻=4,4-dioxidobiphenyl-3,3-dicarboxylate) that contain open metal sites is presented. The NH₃ uptake of Mg₂(dobpdc) at 298 K was 23.9 mmol g⁻¹ at 1 bar and 8.25 mmol g⁻¹ at 570 ppm, which are record high capacities at both pressures among existing porous adsorbents. The structural stability of Mg₂(dobpdc) upon exposure to wet NH₃ was superior to that of the other M₂(dobpdc) and the frameworks tested. Overall, these results demonstrate that Mg₂(dobpdc) is a recyclable compound that exhibits significant NH₃ affinity and capacity, making it a promising candidate for real-world NH₃-capture applications.     

When High-Temperature Cesium Chemistry Meets Self-Templating: Metal Acetates as Building Blocks of Unusual Highly Porous Carbons

Self-templating is a facile strategy for synthesizing porous carbons by direct pyrolysis of organic metal salts. However, the method typically suffers from low yields (<4%) and limited specific surface areas (SSA<2000 m² g⁻¹) originating from low activity of metal cations (e.g., K⁺ or Na⁺) in promoting construction and activation of carbon frameworks. Here we use cesium acetate as the only precursor of oxo-carbons with large SSA of the order of 3000 m² g⁻¹, pore volume approaching 2 cm³ g⁻¹, tunable oxygen contents, and yields of up to 15 %. We unravel the role of Cs⁺ as an efficient promoter of framework formation, templating and etching agent, while acetates act as carbon/oxygen sources of carbonaceous frameworks. The oxo-carbons show record-high CO₂ uptake of 8.71 mmol g⁻¹ and an ultimate specific capacitance of 313 F g⁻¹ in the supercapacitor. This study helps to understand and rationally tailor the materials design by a still rare organic solid-state chemistry.     

Eutectic Molten Salt Synthesis of Highly Microporous Macrocyclic Porous Organic Polymers for CO2 Capture

The development of porous materials is of great interest for the capture of CO₂ from various emission sources, which is essential to mitigate its detrimental environmental impact. In this direction, porous organic polymers (POPs) have emerged as prime candidates owing to their structural tunability, physiochemical stability and high surface areas. In an effort to transfer an intrinsic property of a cyclotetrabenzoin-derived macrocycle – its high CO₂ affinity – into porous networks, herein we report the synthesis of three-dimensional (3D) macrocycle-based POPs through the polycondensation of an octaketone macrocycle with phenazine-2,3,7,8-tetraamine hydrochloride. This polycondensation was performed under ionothermal conditions, using a eutectic salt mixture in the temperature range of 200 to 300 °C. The resulting polymers, named 3D-mmPOPs, showed reaction temperature-dependent surface areas and gas uptake properties. 3D-mmPOP-250 synthesized at 250 °C exhibited a surface area of 752 m² g⁻¹ and high microporosity originating from the macrocyclic units, thus resulting in an excellent CO₂ binding enthalpy of 40.6 kJ mol⁻¹ and CO₂ uptake capacity of 3.51 mmol g⁻¹ at 273 K, 1.1 bar.     

A Carbon-Negative Hydrogen Production Strategy: CO2 Selective Capture with H2 Production

We reported a strategy of carbon-negative H₂ production in which CO₂ capture was coupled with H₂ evolution at ambient temperature and pressure. For this purpose, carbonate-type Cu_xMg_yFe_z layered double hydroxide (LDH) was preciously constructed, and then a photocatalysis reaction of interlayer CO₃²⁻ reduction with glycerol oxidation was performed as driving force to induce the electron storage on LDH layers. With the participation of pre-stored electrons, CO₂ was captured to recover interlayer CO₃²⁻ in presence of H₂O, accompanied with equivalent H₂ production. During photocatalysis reaction, Cu_0.6Mg_1.4Fe₁ exhibited a decent CO evolution amount of 1.63 mmol g⁻¹ and dihydroxyacetone yield of 3.81 mmol g⁻¹. In carbon-negative H₂ production process, it showed an exciting CO₂ capture quantity of 1.61 mmol g⁻¹ and H₂ yield of 1.44 mmol g⁻¹. Besides, this system possessed stable operation capability under simulated flu gas condition with negligible performance loss, exhibiting application prospect.     

Modulating Metal-Nitrogen Coupling in Anti-Perovskite Nitride via Cation Doping for Efficient Reduction of Nitrate to Ammonia

The complexes of metal center and nitrogen ligands are the most representative systems for catalyzing hydrogenation reactions in small molecule conversion. Developing heterogeneous catalysts with similar active metal-nitrogen functional centers, nevertheless, still remains challenging. In this work, we demonstrate that the metal-nitrogen coupling in anti-perovskite Co₄N can be effective modulated by Cu doping to form Co₃CuN, leading to strongly promoted hydrogenation process during electrochemical reduction of nitrate (NO₃⁻RR) to ammonia. The combination of advanced spectroscopic techniques and density functional theory calculations reveal that Cu dopants strengthen the Co−N bond and upshifted the metal d-band towards the Fermi level, promoting the adsorption of NO₃⁻ and *H and facilitating the transition from *NO₂/*NO to *NO₂H/*NOH. Consequently, the Co₃CuN delivers noticeably better NO₃⁻RR activity than the pristine Co₄N, with optimal Faradaic efficiency of 97 % and ammonia yield of 455.3 mmol h⁻¹ cm⁻² at −0.3 V vs. RHE. This work provides an effective strategy for developing high-performance heterogeneous catalyst for electrochemical synthesis.     

Disclosing Support-Size-Dependent Effect on Ambient Light-Driven Photothermal CO2 Hydrogenation over Nickel/Titanium Dioxide

The size of support in heterogeneous catalysts can strongly affect the catalytic property but is rarely explored in light-driven catalysis. Herein, we demonstrate the size of TiO₂ support governs the selectivity in photothermal CO₂ hydrogenation by tuning the metal-support interactions (MSI). Small-size TiO₂ loading nickel (Ni/TiO₂-25) with enhanced MSI promotes photo-induced electrons of TiO₂ migrating to Ni nanoparticles, thus favoring the H₂ cleavage and accelerating the CH₄ formation (227.7 mmol g⁻¹ h⁻¹) under xenon light-induced temperature of 360 °C. Conversely, Ni/TiO₂-100 with large TiO₂ prefers yielding CO (94.2 mmol g⁻¹ h⁻¹) due to weak MSI, inefficient charge separation, and inadequate supply of activated hydrogen. Under ambient solar irradiation, Ni/TiO₂-25 achieves the optimized CH₄ rate (63.0 mmol g⁻¹ h⁻¹) with selectivity of 99.8 %, while Ni/TiO₂-100 exhibits the CO selectivity of 90.0 % with rate of 30.0 mmol g⁻¹ h⁻¹. This work offers a novel approach to tailoring light-driven catalytic properties by support size effect.     

Boosting Electrocatalytic Nitrate-to-Ammonia via Tuning of N-Intermediate Adsorption on a Zn−Cu Catalyst

The renewable-energy-powered electroreduction of nitrate (NO₃⁻) to ammonia (NH₃) has garnered significant interest as an eco-friendly and promising substitute for the Haber–Bosch process. However, the sluggish kinetics hinders its application at a large scale. Herein, we first calculated the N-containing species (*NO₃ and *NO₂) binding energy and the free energy of the hydrogen evolution reaction over Cu with different metal dopants, and it was shown that Zn was a promising candidate. Based on the theoretical study, we designed and synthesized Zn-doped Cu nanosheets, and the as-prepared catalysts demonstrated excellent performance in NO₃⁻-to-NH₃. The maximum Faradaic efficiency (FE) of NH₃ could reach 98.4 % with an outstanding yield rate of 5.8 mol g⁻¹ h⁻¹, which is among the best results up to date. The catalyst also had excellent cycling stability. Meanwhile, it also presented a FE exceeding 90 % across a wide potential range and NO₃⁻ concentration range. Detailed experimental and theoretical studies revealed that the Zn doping could modulate intermediates adsorption strength, enhance NO₂⁻ conversion, change the *NO adsorption configuration to a bridge adsorption, and decrease the energy barrier, leading to the excellent catalytic performance for NO₃⁻-to-NH₃.     

Enhancing Electrochemical Nitrate Reduction to Ammonia over Cu Nanosheets via Facet Tandem Catalysis

Electrochemical conversion of nitrate (NO₃⁻) into ammonia (NH₃) represents a potential way for achieving carbon-free NH₃ production while balancing the nitrogen cycle. Herein we report a high-performance Cu nanosheets catalyst which delivers a NH₃ partial current density of 665 mA cm⁻² and NH₃ yield rate of 1.41 mmol h⁻¹ cm⁻² in a flow cell at −0.59 V vs. reversible hydrogen electrode. The catalyst showed a high stability for 700 h with NH₃ Faradaic efficiency of ≈88 % at 365 mA cm⁻². In situ spectroscopy results verify that Cu nanosheets are in situ derived from the as-prepared CuO nanosheets under electrochemical NO₃⁻ reduction reaction conditions. Electrochemical measurements and density functional theory calculations indicate that the high performance is attributed to the tandem interaction of Cu(100) and Cu(111) facets. The NO₂⁻ generated on the Cu(100) facets is subsequently hydrogenated on the Cu(111) facets, thus the tandem catalysis promotes the crucial hydrogenation of *NO to *NOH for NH₃ production.