Surface-Regulated Rhodium–Antimony Nanorods for Nitrogen Fixation

Surface regulation is an effective strategy to improve the performance of catalysts, but it has been rarely demonstrated for nitrogen reduction reaction (NRR) to date. Now, surface-rough Rh₂Sb nanorod (RNR) and surface-smooth Rh₂Sb NR (SNR) were selectively created, and their performance for NRR was investigated. The high-index-facet bounded Rh₂Sb RNRs/C exhibit a high NH₃ yield rate of 228.85±12.96 μg h⁻¹ mg⁻¹_Rh at −0.45 V versus reversible hydrogen electrode (RHE), outperforming the Rh₂Sb SNRs/C (63.07±4.45 μg h⁻¹ mg⁻¹_Rh) and Rh nanoparticles/C (22.82±1.49 μg h⁻¹ mg⁻¹_Rh), owing to the enhanced adsorption and activation of N₂ on high-index facets. Rh₂Sb RNRs/C also show durable stability with negligible activity decay after 10 h of successive electrolysis. The present work demonstrates that surface regulation plays an important role in promoting NRR activity and provides a new strategy for creating efficient NRR electrocatalysts.     

Ambient Electrosynthesis of Ammonia on a Core–Shell-Structured Au@CeO2 Catalyst: Contribution of Oxygen Vacancies in CeO2

Electrosynthesis of NH₃ through the N₂ reduction reaction (NRR) under ambient conditions is regarded as promising technology to replace the industrial energy- and capital-intensive Haber–Bosch process. Herein, a room-temperature spontaneous redox approach to fabricate a core–shell-structured Au@CeO₂ composite, with Au nanoparticle sizes below about 10 nm and a loading amount of 3.6 wt %, is reported for the NRR. The results demonstrate that as-synthesized Au@CeO₂ possesses a surface area of 40.7 m² g⁻¹ and a porous structure. As an electrocatalyst, it exhibits high NRR activity, with an NH₃ yield rate of 28.2 μg h⁻¹ cm⁻² (10.6 μg h⁻¹ mg⁻¹_cat., 293.8 μg h⁻¹ mg⁻¹_Au) and a faradaic efficiency of 9.50 % at −0.4 V versus a reversible hydrogen electrode in 0.01 m H₂SO₄ electrolyte. The characterization results reveal the presence of rich oxygen vacancies in the CeO₂ nanoparticle shell of Au@CeO₂; these are favorable for N₂ adsorption and activation for the NRR. This has been further verified by theoretical calculations. The abundant oxygen vacancies in the CeO₂ nanoparticle shell, combined with the Au nanoparticle core of Au@CeO₂, are electrocatalytically active sites for the NRR, and thus, synergistically enhance the conversion of N₂ into NH₃.     

Defect Engineering Metal‐Free Polymeric Carbon Nitride Electrocatalyst for Effective Nitrogen Fixation under Ambient Conditions

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions provides an intriguing picture for the conversion of N₂ into NH₃. However, electrocatalytic NRR mainly relies on metal‐based catalysts, and it remains a grand challenge in enabling effective N₂ activation on metal‐free catalysts. Here we report a defect engineering strategy to realize effective NRR performance (NH₃ yield: 8.09 μg h^?1 mg^?1_cat., Faradaic efficiency: 11.59 %) on metal‐free polymeric carbon nitride (PCN) catalyst. Illustrated by density functional theory calculations, dinitrogen molecule can be chemisorbed on as‐engineered nitrogen vacancies of PCN through constructing a dinuclear end‐on bound structure for spatial electron transfer. Furthermore, the N?N bond length of adsorbed N₂ increases dramatically, which corresponds to “strong activation” system to reduce N₂ into NH₃. This work also highlights the significance of defect engineering for improving electrocatalysts with weak N₂ adsorption and activation ability.     

Surface‐Regulated Rhodium–Antimony Nanorods for Nitrogen Fixation

Surface regulation is an effective strategy to improve the performance of catalysts, but it has been rarely demonstrated for nitrogen reduction reaction (NRR) to date. Now, surface‐rough Rh₂Sb nanorod (RNR) and surface‐smooth Rh₂Sb NR (SNR) were selectively created, and their performance for NRR was investigated. The high‐index‐facet bounded Rh₂Sb RNRs/C exhibit a high NH₃ yield rate of 228.85±12.96 μg h^?1 mg^?1_Rh at ?0.45 V versus reversible hydrogen electrode (RHE), outperforming the Rh₂Sb SNRs/C (63.07±4.45 μg h^?1 mg^?1_Rh) and Rh nanoparticles/C (22.82±1.49 μg h^?1 mg^?1_Rh), owing to the enhanced adsorption and activation of N₂ on high‐index facets. Rh₂Sb RNRs/C also show durable stability with negligible activity decay after 10 h of successive electrolysis. The present work demonstrates that surface regulation plays an important role in promoting NRR activity and provides a new strategy for creating efficient NRR electrocatalysts.     

Electrocatalytically Active Fe-(O-C2)4 Single-Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single-atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single-atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single-atom electrocatalyst supported on low-cost, nitrogen-free lignocellulose-derived carbon. The extended X-ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe-(O-C₂)₄ coordination configuration. Density functional theory calculations identify Fe-(O-C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h⁻¹ mg_cat.⁻¹ (5350 μg h⁻¹ mg_Fe⁻¹) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h⁻¹ mg_cat.⁻¹ (51 283 μg h⁻¹ mg_Fe⁻¹) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.     

A Janus Fe-SnO2 Catalyst that Enables Bifunctional Electrochemical Nitrogen Fixation

Electrochemical N₂ reduction reactions (NRR) and the N₂ oxidation reaction (NOR), using H₂O and N₂, are a sustainable approach to N₂ fixation. To date, owing to the chemical inertness of nitrogen, emerging electrocatalysts for the electrochemical NRR and NOR at room temperature and atmospheric pressure remain largely underexplored. Herein, a new-type Fe-SnO₂ was designed as a Janus electrocatalyst for achieving highly efficient NRR and NOR catalysis. A high NH₃ yield of 82.7 μg h⁻¹ mg_cat.⁻¹ and a Faraday efficiency (FE) of 20.4 % were obtained for NRR. This catalyst can also serve as an excellent NOR electrocatalyst with a NO₃⁻ yields of 42.9 μg h⁻¹ mg_cat.⁻¹ and a FE of 0.84 %. By means of experiments and DFT calculations, it is revealed that the oxygen vacancy-anchored single-atom Fe can effectively adsorb and activate chemical inert N₂ molecules, lowering the energy barrier for the vital breakage of N≡N and resulting in the enhanced N₂ fixation performance.     

ZnO Quantum Dots Coupled with Graphene toward Electrocatalytic N2 Reduction: Experimental and DFT Investigations

Electrochemical reduction of N₂ to NH₃ is a promising method for artificial N₂ fixation, but it requires efficient and robust electrocatalysts to boost the N₂ reduction reaction (NRR). Herein, a combination of experimental measurements and theoretical calculations revealed that a hybrid material in which ZnO quantum dots (QDs) are supported on reduced graphene oxide (ZnO/RGO) is a highly active and stable catalyst for NRR under ambient conditions. Experimentally, ZnO/RGO was confirmed to favor N₂ adsorption due to the largely exposed active sites of ultrafine ZnO QDs. DFT calculations disclosed that the electronic coupling of ZnO with RGO resulted in a considerably reduced activation-energy barrier for stabilization of *N₂H, which is the rate-limiting step of the NRR. Consequently, ZnO/RGO delivered an NH₃ yield of 17.7 μg h⁻¹ mg⁻¹ and a Faradaic efficiency of 6.4 % in 0.1 m Na₂SO₄ at −0.65 V (vs. RHE), which compare favorably to those of most of the reported NRR catalysts and thus demonstrate the feasibility of ZnO/RGO for electrocatalytic N₂ fixation.     

Fluorine-Stabilized Defective Black Phosphorene as a Lithium-Like Catalyst for Boosting Nitrogen Electroreduction to Ammonia

Electrocatalytic N₂ reduction reaction (NRR) is recognized as a zero-carbon emission method for NH₃ synthesis. However, to date, this technology still suffers from low yield and low selectivity associated with the catalyst. Herein, inspired by the activation of N₂ by lithium metal, a highly reactive defective black phosphorene (D−BP_ene) is proposed as a lithium-like catalyst for boosting electrochemical N₂ activation. Correspondingly, we also report a strategy for producing environmentally stable D−BP_ene by simultaneously constructing defects and fluorination protection based on topochemical reactions. Reliable performance evaluations show that the fluorine-stabilized D−BP_ene can induce a high NH₃ yield rate of ≈70 μg h⁻¹ mg_cat.⁻¹ and a high Faradaic efficiency of ≈26 % at −0.5 V vs. RHE in an aqueous electrolyte. This work not only exemplifies the first stable preparation and practical application of D−BP_ene, but also brings a new design idea for NRR catalysts.     

ZIF-Induced d-Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d-band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat⁻¹ h⁻¹ under ambient conditions. The strategy lowers electrocatalyst d-band position to weaken H adsorption and concurrently creates electron-deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44-fold compared to without ZIF (ca. 1 %). The Pt/Au-N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Pulsed Electrocatalysis Enabling High Overall Nitrogen Fixation Performance for Atomically Dispersed Fe on TiO2

Atomically dispersed Fe was designed on TiO₂ and explored as a Janus electrocatalyst for both nitrogen oxidation reaction (NOR) and nitrogen reduction reaction (NRR) in a two-electrode system. Pulsed electrochemical catalysis (PE) was firstly involved to inhibit the competitive hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Excitingly, an unanticipated yield of 7055.81 μmol h⁻¹ g⁻¹_cat. and 12 868.33 μmol h⁻¹ g⁻¹_cat. were obtained for NOR and NRR at 3.5 V, respectively, 44.94 times and 7.8 times increase in FE than the conventional constant voltage electrocatalytic method. Experiments and density functional theory (DFT) calculations revealed that the single-atom Fe could stabilize the oxygen vacancy, lower the energy barrier for the vital rupture of N≡N, and result in enhanced N₂ fixation performance. More importantly, PE could effectively enhance the N₂ supply by reducing competitive O₂ and H₂ agglomeration, inhibit the electrocatalytic by-product formation for longstanding *OOH and *H intermediates, and promote the non-electrocatalytic process of N₂ activation.     

A Surface-Strained and Geometry-Tailored Nanoreactor that Promotes Ammonia Electrosynthesis

A surface-strained and geometry-optimized TiO₂ nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti³⁺ sites, demonstrating a more favorable pathway for the N₂ activation and selective NH₃ production with a faster kinetic rate than the pristine TiO₂. The TiO₂-based nanoreactor with surface and bulk structure tailoring delivered an NH₃ yield rate up to 5.50 μg h⁻¹ cm⁻² (16.67 μg h⁻¹ mg_cat⁻¹) and high faradaic efficiency of 26 % under ambient aqueous conditions. Our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.     

Reactive Ionic Liquid Enables the Construction of 3D Rh Particles with Nanowire Subunits for Electrocatalytic Nitrogen Reduction

Until now, the synthesis of Rh particles with unusual three‐dimensional (3D) nanostructures is still challenging. A 3D nanostructure enables fast ion/molecule transport and possesses plenty of exposed active surface, and therefore it is of great interest to construct 3D Rh particles catalysts for the N₂ reduction reaction (NRR). Herein, we proposed a reactive ionic liquid strategy for fabricating unusual 3D Rh particles with nanowires as the subunits. The ionic liquid n‐octylammonium formate simultaneously worked as reaction medium, reductant and template for the successful construction of 3D Rh particles. The as‐prepared 3D Rh particles demonstrated excellent activity for electrocatalytic N₂ fixation in 0.1 M KOH electrolyte under ambient conditions with a high NH₃ yield of 35.58 μg h^?1 mg_cat.^?1 at ?0.2 V versus reversible hydrogen electrode (RHE), surpassing most of the state‐of‐the‐art noble metal catalysts. Our reactive ionic liquid strategy thus holds great promise for the rational construction of high‐performance electrocatalysts toward NRR.     

Amorphous core/shell Ti-doped SnO2 with synergistically improved N2 adsorption/activation and electrical conductivity for electrochemical N2 reduction

Electrochemical nitrogen reduction reaction (NRR) has been considered as an appealing and sustainable method to produce ammonia from N₂ under ambient conditions, attracting increasing interest. Limited by low solubility of N₂ in water and high stability of NN triple bond, developing NRR electrocatalysts with both strong N₂ adsorption/activation and high electrical conductivity remain challenging. Here, we demonstrate an efficient strategy to develop NRR electrocatalyst with synergistically enhanced N₂ adsorption/activation and electrical conductivity by heteroatom doping. Combining computational and experimental study, the DFT-designed Ti-doped SnO₂ exhibits significantly enhanced NRR performance with ammonia yield rate of 13.09 µg h^?1 mg^?1 at ?0.2 V vs. RHE. Particularly, the Faradaic efficiency reaches up to 42.6%, outperforming most of Sn-based electrocatalysts. The fundamental mechanism for improving NRR performance of SnO₂ by Ti doping is also revealed. Our work highlights a powerful strategy for developing high-activity electrocatalysts for NRR and beyond.     

A Janus Fe‐SnO2 Catalyst that Enables Bifunctional Electrochemical Nitrogen Fixation

Electrochemical N₂ reduction reactions (NRR) and the N₂ oxidation reaction (NOR), using H₂O and N₂, are a sustainable approach to N₂ fixation. To date, owing to the chemical inertness of nitrogen, emerging electrocatalysts for the electrochemical NRR and NOR at room temperature and atmospheric pressure remain largely underexplored. Herein, a new‐type Fe‐SnO₂ was designed as a Janus electrocatalyst for achieving highly efficient NRR and NOR catalysis. A high NH₃ yield of 82.7 μg h^?1 mg_cat.^?1 and a Faraday efficiency (FE) of 20.4 % were obtained for NRR. This catalyst can also serve as an excellent NOR electrocatalyst with a NO₃^? yields of 42.9 μg h^?1 mg_cat.^?1 and a FE of 0.84 %. By means of experiments and DFT calculations, it is revealed that the oxygen vacancy‐anchored single‐atom Fe can effectively adsorb and activate chemical inert N₂ molecules, lowering the energy barrier for the vital breakage of N≡N and resulting in the enhanced N₂ fixation performance.     

Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation

NH₃ synthesis by the electrocatalytic N₂ reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method—the Haber–Bosch process—that requires high temperature and pressure. We report single Mo atoms anchored to nitrogen‐doped porous carbon as a cost‐effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH₃ yield rate (34.0±3.6 μg h^?1 mg_cat.^?1) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non‐precious‐metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single‐atom non‐precious‐metal catalysts for the electrocatalytic NRR.     

Ammonia Synthesis Under Ambient Conditions: Selective Electroreduction of Dinitrogen to Ammonia on Black Phosphorus Nanosheets

Constructing efficient catalysts for the N₂ reduction reaction (NRR) is a major challenge for artificial nitrogen fixation under ambient conditions. Herein, inspired by the principle of “like dissolves like”, it is demonstrated that a member of the nitrogen family, well‐exfoliated few‐layer black phosphorus nanosheets (FL‐BP NSs), can be used as an efficient nonmetallic catalyst for electrochemical nitrogen reduction. The catalyst can achieve a high ammonia yield of 31.37 μg h^?1 mg^?1_cat. under ambient conditions. Density functional theory calculations reveal that the active orbital and electrons of zigzag and diff‐zigzag type edges of FL‐BP NSs enable selective electrocatalysis of N₂ to NH₃ via an alternating hydrogenation pathway. This work proves the feasibility of using a nonmetallic simple substance as a nitrogen‐fixing catalyst and thus opening a new avenue towards the development of more efficient metal‐free catalysts.     

Electrocatalytically Active Fe‐(O‐C2)4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single‐atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single‐atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single‐atom electrocatalyst supported on low‐cost, nitrogen‐free lignocellulose‐derived carbon. The extended X‐ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe‐(O‐C₂)₄ coordination configuration. Density functional theory calculations identify Fe‐(O‐C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h^?1 mg_cat.^?1 (5350 μg h^?1 mg_Fe^?1) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h^?1 mg_cat.^?1 (51 283 μg h^?1 mg_Fe^?1) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.     

Activating Bi p-orbitals in Dispersed Clusters of Amorphous BiOx for Electrocatalytic Nitrogen Reduction

Catalytic strategies based on main group metals are significantly less advanced than those of transition metal catalysis, leaving untapped areas of potentially fruitful research. We here demonstrate an effective approach for the modulation of Bi 6p energy levels during the construction of atomically dispersed clusters of amorphous BiO_x. Bi oxidation state is proposed to strongly affects the nitrogen fixation activity, with the half-occupied p_z orbitals of the Bi²⁺ ions being highly efficient toward electron injection into the inert N₂ molecule. With sufficient catalytic sites to adsorb and activate N₂, the bonding between N₂ and catalyst is able to be in situ identified. The catalyst shows an outstanding Faraday efficiency (≈30 %) and high yield (≈113 μg h⁻¹ mg⁻¹_cat) in NH₃ production, outperforming most of the existing catalysts in aqueous solution. These results lay the basis for developing the potential of p-block elements for catalysis of multi-electron reactions.     

Crystal-Phase-Engineered PdCu Electrocatalyst for Enhanced Ammonia Synthesis

Crystal phase engineering is a powerful strategy for regulating the performance of electrocatalysts towards many electrocatalytic reactions, while its impact on the nitrogen electroreduction has been largely unexplored. Herein, we demonstrate that structurally ordered body-centered cubic (BCC) PdCu nanoparticles can be adopted as active, selective, and stable electrocatalysts for ammonia synthesis. Specifically, the BCC PdCu exhibits excellent activity with a high NH₃ yield of 35.7 μg h⁻¹ mg⁻¹_cat, Faradaic efficiency of 11.5 %, and high selectivity (no N₂H₄ is detected) at −0.1 V versus reversible hydrogen electrode, outperforming its counterpart, face-centered cubic (FCC) PdCu, and most reported nitrogen reduction reaction (NRR) electrocatalysts. It also exhibits durable stability for consecutive electrolysis for five cycles. Density functional theory calculation reveals that strong orbital interactions between Pd and neighboring Cu sites in BCC PdCu obtained by structure engineering induces an evident correlation effect for boosting up the Pd 4d electronic activities for efficient NRR catalysis. Our findings open up a new avenue for designing active and stable electrocatalysts towards NRR.     

Nanoporous Palladium Hydride for Electrocatalytic N2 Reduction under Ambient Conditions

The electrocatalytic nitrogen reduction reaction (NRR) is an alternative eco‐friendly strategy for sustainable N₂ fixation with renewable energy. However, NRR suffers from sluggish kinetics owing to difficult N₂ adsorption and N≡N cleavage. Now, nanoporous palladium hydride is reported as electrocatalyst for electrochemical N₂ reduction under ambient conditions, achieving a high ammonia yield rate of 20.4 μg h^?1 mg^?1 with a Faradaic efficiency of 43.6 % at low overpotential of 150 mV. Isotopic hydrogen labeling studies suggest the involvement of lattice hydrogen atoms in the hydride as active hydrogen source. In situ Raman analysis and density functional theory (DFT) calculations further reveal the reduction of energy barrier for the rate‐limiting *N₂H formation step. The unique protonation mode of palladium hydride would provide a new insight on designing efficient and robust electrocatalysts for nitrogen fixation.