缓变回旋管谐振腔研究

在高次模回旋管中, 模式竞争是亟待解决的问题. 本文基于广义传输线理论, 得到能准确描述缓变结构谐振腔模式耦合的一阶传输线方程组; 通过分析耦合系数, 优化得到了一种新型光滑渐变(缓变)谐振腔. 与直线连接的(折变)谐振腔相比, 该腔体有更强的模式抑制能力, 腔中非工作模式归一化幅值可达-100 dB, 输出行波段非工作模式归一化幅值可达-88.6 dB.     

回旋速调放大器输入谐振腔分析及数值模拟

 输入谐振腔将波导输入的高频信号转化为内腔中工作模式的驻波场，以实现对回旋电子注角向速度的调制。对输入谐振腔的同轴谐振腔和两端开孔的圆柱谐振腔分别进行了解析分析，数值计算中引入修正来反应耦合狭缝的影响，几min就能完成一种结构尺寸的计算分析。通过优化得到输入谐振腔的初步结构和尺寸，然后利用三维高频分析软件HFSS进行精确的模拟和修正，提高模式转化效率和纯度，获得了高性能的输入谐振腔。     

突变复合腔回旋管自洽场理论与模拟

研究了具有突变结构复合腔回旋管注波互作用自洽非线性理论.用场匹配方法处理了腔中的突变结构,从具有电子流源的普遍传输线方程出发,研究了腔中注波互作用非线性理论,在腔直径渐变部分考虑了模式之间的耦合.利用此非线性理论模型,对突变结构复合腔三次谐波回旋管中电子流与H511—H521模式对的高频场互作用进行了详细数值模拟,得出了许多有价值的结果.计算结果表明,在合适的腔体结构尺寸下,注波互作用效率可大于25%. 关键词：     

95 GHz TE03模回旋管内置渐变波导设计

在耦合波理论的基础上,结合波导渐变曲线给出了普适高阶渐变波导设计方法,研究了95 GHz回旋管内置 TE03模式改进Dolph-Chebychev渐变波导。采用编制的数值计算程序进行优化,得到了可靠的最优几何参量,设计出了紧凑的95 GHz渐变波导。经全电磁场仿真验证,该内置渐变输出结构对杂模的抑制达30 dB,满足设计要求。回旋管的热测实验中测出的模式样图表明,所设计的内置渐变波导有效地实现了回旋管内径变化。该方法可以高效地指导高阶过模圆波导渐变结构的设计。     

渐变段倾角对渐变复合腔特性影响的分析

 利用模式耦合理论，在考虑多模耦合的情况下，对渐变结构复合腔进行了冷腔分析，计算了H₅₁-H₅₂模式对下，各个模式的耦合及场幅值分布情况，分析了渐变段的倾角对渐变复合腔的Q值及场幅值分布的影响。研究表明：渐变段的倾角对渐变结构复合腔的高频特性有很大的影响，特别是各模式的场分布及Q值，合适地选择渐变角度，能使场幅值放大率比较大，这将有利于提高注-波互作用效率。     

含有吸收介质的突变结构腔体场匹配分析

采用分区求解场及边界场匹配方法推导出含有吸收介质波导的色散方程及突变结构高频腔体混合模式的场匹配方程。将解析分析与数值计算结合，对回旋速调管放大器高频腔体进行了数值计算，研究了吸收层对波导传播、衰减特性及谐振腔的谐振特性、损耗特性、Q值、场分布的影响。给出了数值模拟主要结果。 关键词： 吸收介质 场匹配 混合模 谐振腔 高功率微波     

回旋管光子带隙谐振腔冷腔电磁模式分析

利用二维三角格子金属光子带隙谐振腔代替回旋管的传统柱形谐振腔,并对腔体进行了TE波模式的计算与分析.综合考虑腔体内外的结构特征,给出了光子带隙谐振腔冷腔模式理论的研究方法,发现腔内存在单模工作的可能与条件以及非角对称情况下的电磁模式分布特征.研究结果表明,利用光子带隙谐振腔代替回旋管的传统腔体,可使回旋管在不受腔体横向尺度限制的条件下实现单模工作.这对于提高回旋管的功率容量、有效实现高次单模与高次回旋谐波耦合条件下的注-波互作用、降低工作磁场并从物理上根本改变回旋管的工作状态提供了理论依据. 关键词： 回旋管 金属光子带隙 谐振腔     

波瓣波导谐振腔太赫兹回旋管的研究

以电子回旋脉塞非线性理论为基础, 结合三维电磁仿真软件, 通过导入高频场数值解替代理论解析的方法, 对波瓣波导谐振腔高次谐波太赫兹回旋管进行了理论和模拟研究. 给出了该类回旋管的起振电流、耦合系数以及注波互作用效率等重要参数, 并在此基础上设计了一只工作频率为0.4 THz, 工作模式TE₃₃模三次谐波波瓣波导谐振腔回旋管, 其电子注参数为1.0 A, 40.5 kV, 横纵速度比1.5,互作用区引导磁场为5.09 T, 输出功率达到3.3 kW.     

回旋管同轴谐振腔模式的选择

 为了研究回旋管工作模式的选择机理,分析了圆柱波导开放式谐振腔、光滑同轴谐振腔和纵向内开槽同轴谐振腔相应波导的色散特性,进而研究了这些谐振腔内模式竞争的问题。对同轴结构波导色散方程作了相应的数值计算,结果表明,同轴谐振腔利用自身色散曲线与谐振腔内外半径比值的数值关系,能够使在开放式谐振腔内无法工作的高阶模式在其内部稳定工作。最后,以德国卡尔斯鲁厄理工学院(KIT)研制的同轴回旋管为例,进行了相应的分析计算,结果表明纵向内开槽同轴谐振腔相对于光滑同轴谐振腔更适合高阶模式的稳定工作。     

双共焦波导结构二次谐波太赫兹回旋管谐振腔设计

准光共焦波导具有功率容量大、模式密度低的特点,能够有效地减少模式竞争对回旋管互作用的影响,有利于高次谐波太赫兹回旋管的设计.为提高太赫兹准光回旋管的互作用效率,在共焦柱面波导的基础上,研究了一种新型高频互作用结构——双共焦波导结构,设计了一种330 GHz二次谐波双共焦结构回旋管谐振腔并对其进行了理论分析和粒子模拟.研究结果表明,双共焦谐振腔中的高阶模式能够与高次电子回旋谐波发生稳定的相互作用,并且没有模式竞争现象,具备工作在太赫兹波段的潜力.相比普通共焦波导谐振腔,双共焦谐振腔能够增强准光回旋管的注波互作用强度,提高回旋管的输出功率和工作效率.此外,结果还表明双共焦波导中的电磁波模式是一种由两个独立的共焦波导模式叠加而成的混合模式.利用这种混合模式有望实现太赫兹回旋管的单注双频工作,为新型太赫兹辐射源的研究提供了新的途径.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.