复合式微流控芯片上阴离子型固相萃取微柱柱性能分析

利用原位聚合法在玻璃微管道内制备阴离子交换型固相萃取(SPE)微柱,以NO2^-为分析对象,针对NaNO2-KI—Luminol发光体系设计微流控芯片,并将SPE微柱与微流控芯片连接起来组建成带有SPE微柱的复合式微流控芯片。分析了SPE微柱对NO2^-的吸附保留与富集作用,在复合式微流控芯片上,实现了NO2^-的进样、分离富集和检测,通过漏点曲线和交换容量两种方法分析了SPE微柱的柱容量。为控制SPE微柱的最大进样体积提供有利保障,并实现了食品中NO2^-的在线分离富集与检测。     

原位聚合法制备鱼藤酮微胶囊

原位聚合法制备;鱼藤酮微胶囊;鱼藤酮;原位聚合法;微胶囊;三聚氰胺甲醛树脂     

丙烯腈在铝表面的原位电化学聚合涂层

采用恒电位在铝阴极上原位电化学聚合丙烯腈（AN）形成聚合涂层，研究了支持电解质、电聚合电位及单体浓度等的影响，考察了电流随电聚合时间的变化趋势．结果表明，室温下当电聚合电位为7．0V时，在含DMF和0．05mol／L的AlCl3支持电解质水溶液中，一定浓度的AN电聚合3h可得到约15μm原位聚合涂层．用SEM和FTIR等技术表征了膜层的形貌，讨论了AlAN阴极电化学聚合机理．     

纳米SiO2含量对水性聚氨酯复合材料性能的影响

纳米SiO2;水性聚氨酯;原位聚合;形态;性能     

新型PA6/EP/SiO2纳米复合材料的制备

PA6;SiO2;环氧树脂;原位聚合;纳米复合材料     

聚合法制备无卤阻燃尼龙的研究进展

在全球阻燃材料无卤化的推进过程中,氮系、磷系、硅系等阻燃剂以及其复配物受到各国研究人员的广泛关注。利用聚合法(原位聚合法和共聚法)制备阻燃尼龙,可有效解决共混法中常存在的阻燃剂在基体中分散不均匀而导致的材料性能下降的问题。原位聚合法和共聚法是根据阻燃成分在基体中的存在方式而区分的,通常前者以物理均匀分散为主,后者多以化学键结合。本文在不同制备方法的背景下,根据阻燃剂类别进一步细分,综述了用原位聚合法和共聚法制备无卤阻燃尼龙的相关研究,并探讨了该领域中亟待解决的问题及未来发展方向。     

粘土/聚烯烃纳米复合材料研究进展

原位聚合;插层复合;粘土/聚烯烃纳米复合材料研究进展     

原位ATR-FTIR法研究异丁烯正离子聚合反应

应用原位ATR-FTIR法可在线检测异丁烯可控,活性碳正离子聚合反应过程,文章综述了原位ATR-FTIR法的特点,并进一步介绍其在异丁烯碳正离子聚合机理和动力学研究中的应用。     

高岭土对不饱和聚酯树脂的热稳定性、阻燃及力学性能的影响

不饱和聚酯树脂;高岭土;纳米复合材料;原位聚合;阻燃;成炭     

MMA在路易斯酸性离子液体[BMIM]Cl-ZnCl2中原位聚合

离子液体;PMMA;聚合物电解质;室温离子电导率;原位聚合     

Monolithic poly(ethylhexyl methacrylate-co-ethylene dimethacrylate) column with restricted access layers prepared via reversible addition-fragmentation chain transfer polymerization

The "living"/controlled radical polymerization has provided an opportunity in making a more homogeneous polymer, which is favorable for polymer-based monolithic column fabrication. To study its application in the preparation of separation material, a capillary poly(ethylhexyl methacrylate-co-ethylene dimethacrylate) monolithic column has been synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. The correlation between the synthetic conditions and the polymer structures and separation performance was studied. The result indicated RAFT-mediated reaction provides condition for creating polymers with narrower pore size distribution and higher column efficiency compared with traditional polymerization. The "living" property of the RAFT polymerization was further utilized to graft hydrophilic polymer on the surface of poly(ethylhexyl methacrylate-co-ethylene dimethacrylate). The hydrophilic chain modified monolithic column has both abilities of protein exclusion and small hydrophobic compound retention. The result indicated that RAFT polymerization can be used for making multifunctional material. The restricted access monolithic material synthesized by this method can be used in biological sample analysis with HPLC direct injection.     

混合模式毛细管聚合物整体柱的制备及应用

混合模式毛细管整体色谱柱由于保留机理多样,具有很好的应用前景。本文以[2-（甲基丙烯酰基氧基）乙基]二甲基-（3-磺酸丙基）氢氧化铵（SPE）为单体,乙二醇二甲基丙烯酸酯（EDMA）为交联剂,偶氮二异丁腈（AIBN）为引发剂,正丙醇/1,4-丁二醇/水三元体系为致孔剂,制备了聚合物基质SPE-co-EDMA毛细管液相色谱整体柱。通过系统优化致孔剂和反应物种类和配比、引发剂的用量、反应时间和反应温度等因素,提高了整体柱的柱效、机械强度、渗透性和重复性。结果表明该毛细管整体柱在10 MPa内具有良好的机械强度,渗透性为2.17×10^-14 m²,而且批次内和批次间峰面积的重现性（RSD）分别为1.0%和4.6%。以极性和非极性的多种化合物评价了该毛细管整体柱的色谱性能,结果表明该柱在高有机相中具有亲水相互作用机理,在低有机相中具有反相作用机理,显示出混合模式分离特性。     

胃蛋白酶亲和有机聚合物毛细管整体柱的制备及性能考察

以热引发原位聚合方法制备了聚（甲基丙烯酸缩水甘油酯（glycidyl methacrylate,GMA）-乙二醇二甲基丙烯酸酯（ethyleneglycol dimethacrylate,EDMA））毛细管整体柱,对整体柱的性能进行了表征。结果表明,柱内部结构均匀、渗透性好;整体柱能够实现苯等中性小分子化合物的分离,具有反相色谱特征,重现性和稳定性良好。利用整体柱环氧基团的活性,采用间接法,以戊二醛为连接臂制备胃蛋白酶亲和手性整体柱。在毛细管电色谱模式下进行了柱分离性能研究,并对缓冲液pH值和运行电压等分离条件进行了考察。结果表明,亲和整体柱对4种碱性手性药物（奈福泮、氨氯地平、西酞普兰、扑尔敏）有拆分效果,奈福泮、氨氯地平、西酞普兰能达到基线分离。本文为蛋白质亲和毛细管电色谱整体柱的制备和应用提供了新的思路和方法。     

Preparation of high efficiency and highly retentive monolithic silica capillary columns for reversed-phase chromatography by chemical modification by polymerization of octadecyl methacrylate

High efficiency and highly retentive monolithic silica capillary columns were obtained by polymerization of octadecyl methacrylate using alpha,alpha'-azobis-isobutyronitrile (AIBN) as a free radical initiator. Hybrid type monolithic silica columns (25 cm total length x 200 microm I.D.) prepared from a mixture of tetramethoxysilane and methyltrimethoxysilane were used as a support. The effects of the monomer and the radical initiator concentrations in the reaction mixture were examined. The performance of the columns was tested in terms of column efficiency and retention behavior by using alkylbenzenes and a few other compounds as solutes and compared with that of hybrid monolithic silica columns modified with octadecylsilyl-(N,N-diethylamino)silane (ODS-DEA). Highly retentive monolithic silica columns were obtained by polymerization at high monomer concentrations. Although a decrease in column efficiency was observed with the increase in the monomer concentration in a feed mixture, an improvement in efficiency was achieved (a plate height value lower than 10 microm) by increasing an initiator concentration without significant variations in column retention properties. Results obtained by polymerization using other monomers are also presented to demonstrate the applicability of the preparation method.     

金属-有机骨架MIL-101(Cr)掺杂聚合物整体柱的制备及其用于酚类化合物的在线固相萃取

制备了金属-有机骨架（MOF）MIL-101（Cr）掺杂聚合物整体柱，建立了在线固相萃取-高效液相色谱检测水中4-硝基苯酚、2-硝基苯酚、3-甲基苯酚和2，4-二氯苯酚的方法。考察了样品溶液pH值、上样时间、上样流速和解吸时间对酚类化合物萃取效果的影响。在最优萃取条件下，采用制备的整体柱检测水中酚类化合物，其富集因子高，线性范围宽，精密度好，检出限低，适用于水中酚类化合物的检测。制备掺杂聚合物整体柱是促进和拓宽MOFs在线固相萃取应用的有效方法之一。     

聚合物整体固定相的制备及条件优化

采用无搅动原位聚合模式,在聚醚醚酮柱管中直接制备了聚合物整体固定相。通过扫描电镜观察到该整体固定相的孔径分布呈双峰模式,且孔结构均匀。用压汞法测定了该固定相的孔径分布、孔隙率及比表面积等参数,考察了致孔剂组成、聚合温度及交联剂含量等参数对固定相孔结构的影响,并对制备条件进行了优化。测定了流速与柱前压的关系,实验表明此整体固定相具有良好的通透性。通过对山羊血清和低聚核苷酸的分离分析,证明了所制备的整体固定相适合用于生物大分子的分离纯化。     

Molecularly Imprinted Polymer Monolithic Column Separation of Isomers and Analogues of Vanillin by Capillary Electrochromatography

A vanillin imprinted capillary monolithic column was synthesized by in situ polymerization reaction using ethylene-glycol dimethacrylate as cross-linking monomer and methacrylic acid as functional monomer. Under the optimum conditions of capillary electrochromatography, this molecularly imprinted polymer （MIP）-based column showed high selectivity and could recognize not only template molecule vanillin but also positional isomer o-vanillin from their structural analogues.     

Monolithic capillary columns based on pentaerythritol acrylates for molecular‐size‐based separations of synthetic polymers

Monolithic capillary columns based on pentaerythritol triacrylate and pentaerythritol tetraacrylate were synthesized using different compositions of polymerization mixtures and different polymerization conditions. The impact of porogen type and porogen/monomer ratio on the porosity of synthesized monoliths was investigated. Porogen type appears to be the main factor influencing the separating properties of the monolithic sorbent. Using optimal polymerization conditions (porogen type, porogen/monomer ratio, reaction temperature, time etc.) monoliths with a porous structure optimized for polymer separations can be obtained. The monolithic capillary columns containing porous sorbents with optimized porosity are capable of separating 10 to 12 polystyrene standards in one chromatographic run utilizing both size exclusion chromatography and hydrodynamic chromatography separation mechanisms.     

光聚合整体式咖啡因印迹毛细管柱的制备及分离性能

分子印迹技术作为一种制备对目标分子具有专一识别能力的功能高分子的方法 ,近年来在化学化工、生物化学与生物技术的许多领域中得到广泛应用 [1～ 4 ] .分子印迹技术与微分离方法 (包括微柱液相色谱、毛细管电泳、毛细管电色谱和芯片分离等 )结合已引起人们极大的兴趣和关注[5,6] .毛细管柱是毛细管电色谱和微柱液相色谱的关键部件 ,目前普遍使用的是烷基键合硅胶微粒的填充柱 ,存在制备时须烧塞和填充两大困难 ,以及使用时易产生气泡和易折断等缺点 .将含被识别分子 (印迹分子 )、交联剂、溶剂、功能单体和引发剂的混合液注入毛细管 ,经光…