Enthalpy of Solution of Squalane in Alcohols

Enthalpy of solution at 25°C of squalane in butyl alcohols and 1-octanol is determined calorimetrically. The endothermic effect of dissolution increases in the order 1-OctOH < BuOH < i-BuOH < t-BuOH. A linear correlation is found between the enthalpies of solution of squalane and hexadecane, from which the enthalpy of solution of squalane in methanol is determined. The contributions of the cavity formation and solute-solvent interaction to the enthalpy of solution are estimated by multiple regression analysis. The enthalpy of cavity formation is only slightly dependent on the length of the main chain of an alcohol and also on the branching type, varying in the order 1-OctOH BuOH i-BuOH < MeOH s-BuOH < t-BuOH. Interaction of squalane with alcocols increases in the order MeOH < t-BuOH < BuOH < i-BuOH s-BuOH < 1-OctOH.     

Die Kristallstruktur der Mangansilicide im Bereich von MnSi∼1.7

Zusammenfassung MnSi_1.7-Einkristalle wurden nach demCzochralski-Verfahren gezüchtet. Mit Hilfe vonWeissenberg-Aufnahmen konnte das Mn-Defektsilicid Mn₂₇Si₄₇ identifiziert werden.

---

Crystal structure of manganese silicides with MnSi_1.7 stoichiometry

Single crystals of MnSi_1.7 have been grown usingCzochralski's method. The Mn-defect silicid Mn₂₇Si₄₇ could be identified by means ofWeissenberg photographs.

---

---

Mit 3 Abbildungen     

Determination of uranium in powdered quartz at ppb level by fission track method

Summary The demand for powdered quartz with low alpha —radioactivity has been increasing in the field of manufacturing semiconductor memory device packages. In this work, the determination of uranium in powdered high-purity quartz samples was studied using a simplified fission track procedure in which 0.5 g each of sample and a fission track detector (synthetic quartz glass plate, uranium impurity 0.04 ppb) were loaded in a polyethylene capsule and irradiated with a thermal neutron flux of 10¹⁷ cm^–2. An easy procedure was also employed for chemical etching of fission tracks. All measurements of uranium concentration in the samples were made on a relative basis by comparing the unknown track densities to that measured for NBS glass SRM 617. The reliability was established for the present determination of uranium down to 0.1 ppb. The concentrations of uranium in powdered quartz samples studied in this work were in a range from 7.9 down to 0.12 ppb.

---

Uranbestimmung in Quarzpulver im ppb-Bereich mit Hilfe der Kernspurmethode

Zusammenfassung Da im Bereich der Halbleiterindustrie eine steigende Nachfrage nach Quarzpulver mit niedriger Alpha-Aktivität besteht, wurde die Uranbestimmung in hochreinem Quarzpulver mit Hilfe einer vereinfachten Kernspurmethode untersucht, bei der jeweils etwa 0,5 g der Probe und des Kernspurdetektors (synthetisches Quarzglasplättchen mit etwa 0,04 ppb U) in eine Polyethylenkapsel gegeben und mit einem thermischen Neutronenfluß von etwa 10¹⁷ cm^–2 bestrahlt wurden. Ein einfaches Verfahren zum chemischen Ätzen der Spuren wurde angewendet. Alle Messungen der Urankonzentration wurden relativ durchgeführt durch Vergleich der unbekannten Spurdichten mit denen von Standardglas NBS SRM 617. Die Zuverlässigkeit des Verfahrens wurde bis herab zu etwa 0,1 ppb U geprüft. Die in den untersuchten Proben gefundenen Urankonzentrationen lagen im Bereich von 7,9 bis 0,12 ppb.

     

Experimental investigation on tritium gettering with hydrogen uranyl phosphate (HUP)

At room-temperature and atmospheric pressure, using electrode disks of various sizes, under the action 4 7Vdc eletric field, we gettered tritium gas from 2.2L of air containing (0.15 18.61)×10⁸ Bq of tritium and (3000 12000) ppm of moisture during 50 hours or so the efficiency of gettering tritium was over 95%. Applying liquid scintillation counting method, we measured the tritium in the disks after gettering, and found that the amounts of tritium in the disks were equal to those reduced in the tested tritiated air.     

Strategies to vectorize conventional SCF-Cl algorithms

Recent high-performance computers, especially supercomputers, achieve very high-speed operations but bring about serious I/O problems in quantum chemical computations. Strategies to vectorize conventional SCF-CI algorithms are discussed relating to the I/O problems. The conventional SCF-CI algorithm which is proposed here reduces I/O processing by eliminating all sorting routines and redundant integral files and generates directly nonzero and nonredundant PK integrals with a vectorizable canonically-ordered list. The new implementation has been undertaken and successfully realized as a program system named GSCF3. The vector to scalar acceleration rate of GSCF3 on the HITAC S-810 are as follows: 2.5 5 in the AO integral evaluation, 5 12 in the SCF calculation, 15 30 in the four-index integral transformation, 10 20 in the CI matrix diagonalization, and overall 510 through SCF-CI.     

Donorstärken in 1,2-Dichloräthan

Zusammenfassung Kalorimetrische und spektrophotometrische Untersuchungen über die Donorstärke einer Anzahl nicht-wäßriger Lösungsmittel zeigen, daß die relative Reihung der Donorstärken unabhängig von der Natur des Akzeptors ist. Die Donorreihung lautet gegenüber SbCl₅, Jod und Phenol folgendermaßen: Pyridin > Dimethylsulfoxid > Dimethylacetamid Dimethylformamid > > Trimethylphosphat Diphenylphosphoroxychlorid > Diäthyläther > Aceton > Propandiol-1,2-carbonat > Acetonitril > > Selenoxychlorid Phosphoroxychlorid Benzoylchlorid > > Thionylchlorid > Sulfurylchlorid.

---

Calorimetric and spectrophotometric work on the donor strength of various non-aqueous solvents have shown that the relative order of donor strength is independent from the nature of the acceptor. The order of donor strength towards SbCl₅, I₂ and phenole is pyridine > dimethylsulfoxide > dimethylacetamide dimethylformamide > trimethylphosphate diphenylphosphonic chloride > diethyl ether > acetone > propane diol-1,2-carbonate > acetonitrile > selenium oxychloride phosphorus oxychloride benzoyl chloride > thionyl chloride > sulfuryl chloride.

---

---

Mit 1 Abbildung     

Combined anion-exchange separation and spectrophotometric determination of traces of titanium in sea water

Summary Traces of titanium in sea water have been preconcentrated by anion-exchange from acidified samples in the presence of thiocyanate. Titanium adsorbs strongly on a column of Amberlite CG 400 (SCN^–) and can be stripped easily by elution with 2 M hydrochloric acid — 1.5% hydrogen peroxide solution. Titanium in the effluent is determined spectrophotometrically with diantipyrylmethane as colour reagent. The combined method allows to determine traces of titanium very selectively and sensitively in sea water as well as non-saline water on a 41 sample basis. The method yields a coefficient of variation of 7% at a titanium level of 0.4 g per l.

---

Kombinierte Anionenaustauscher-Trennung und spektralphotometrische Bestimmung von Titanspuren in Meerwasser

Zusammenfassung Titanspuren wurden in Gegenwart von Thiocyanat durch Anionenaustausch aus der angesäuerten Probe angereichert. Titan wird an Amberlite CG 400 (SCN^–) stark adsorbiert und kann durch Elution mit 2M HCl — 1,5% H₂O₂ leicht abgelöst werden. Im Eluat wird es spektralphotometrisch mit Diantipyrylmethan bestimmt. Die kombinierte Methode gestattet eine selektive und empfindliche Bestimmung in einer 41-Probe von Meer- oder auch Süßwasser. Für einen Gehalt von 0,4 g Ti/l beträgt der Variationskoeffizient 7%.

     

Adsorption of radioisotopes from their organic solutions on filter papers the Sb(III)-nonpolar solvents-system

The extraction of Sb(III) chloride by nonpolar solvents from 0.15M HCl was studied as a function of sulphuric acid concentrations in the aqueous phase. The distribution of Sb(III) chloride between the nonpolar solvents benzene, toluene, xylene, nitrobenzene, cyclohexane, chloroform and carbon tetrachloride and filter paper is reported. In case of benzene the Sb(III) activity (given in counts·s^–1·ml^–1) decreases from 1500 to 200 after 24 hours. The corresponding values are about 1200 and 540 for toluene, 1330 and 50 for xylene, 1050 and 700 for nitrobezene, 1080 and 22 for cyclohexane, 330 and 30 for chloroform and 130 and 40 for carbon tetrachloride. More than 95% of the adsorbed Sb(III) is desorbed by 1M HNO₃, 1M HCl or 0.5M H₂SO₄ by contacting the loaded filter paper with any of these acids for 27 hours.     

Synthesis ofN-chioroacetyl-β-glycopyranosylamines,derivatives of monosaccharides and lactose

N-Chloroacetyl--glycopyranosylimines were synthesized from various monosaccharide (hexoses, pentoses, deoxysugars, uronic acids, and sugar phosphates) and a disaccharide (lactose) byN-acylation of the corresponding -glycosylamines with chloroacetic anhydride in DMF In some cases, treatment of rnonosacc harides with NH₃ in the presence of (NH₄)₂CO₃ in MeOH or aqueous MeOH was more efficient than the methods previously described, as it gave -glycosylarnines in higher yields.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 7, pp. 1848–1851, July, 1996.     

Diphenyl(2-pyridyl)methane as a solvent for thiocyanate complexes of zinc in aqueous mineral acids

Summary Tracer (10^–8 M) zinc can be quantitatively extracted with 0.1M diphenyl(2-pyridyl)methane (DPPM) in benzene from neutral and acidic aqueous thiocyanate solutions in a single extraction. In all cases, extraction times of 1–5 min are sufficient for equilibration. The effects of the concentration of the mineral acids, the reagent, complexing and salting-out agents and phase-volume ratios on the metal extraction are reported. The metal is predominantly extracted through solvation, and the extraction of the metal as Zn(SCN)₂(DPPM)₂ is indicated. Among the common salts only sodium chloride exerts a slight depressing effect on extraction when present in high concentration. The metal can be stripped from the organic phase with aqueous oxalate, citrate or acetate solutions in a single operation. Distribution coefficients and separation factors for a number of metal ions, relative to zinc, are reported for 0.2M potassium thiocyanate media that contain the optimal concentration of mineral acid. The method can be employed for the simultaneous preconcentration of toxic metals such as zinc, copper and mercury from neutral aqueous solution in water pollution studies.

---

Diphenyl(2-pyridyl)methan als Lösungsmittel für Zink-Rhodanidkomplexe in wäßrigen Mineralsäuren

Zusammenfassung Zinkspuren (10^–8 M) lassen sich mit einer benzolischen, 0,1 M Lösung von Diphenyl(2-pyridyl)methan (DPPM) aus neutralen oder sauren, wäßrigen Rhodanidlösungen durch eine einzige Extraktion ausschütteln. Jedenfalls sind 1–5 min hinreichend für die Einstellung des Gleichgewichtes. Der Einfluß der Konzentration der Mineralsäure, des Reagens, des Komplexbildners und des Aussalzmittels sowie des Volumenverhältnisses der Phasen auf die Metallextraktion wurde beschrieben. Die Extraktion erfolgt vorherrschend durch Solvatation und zwar als Zn(SCN)₂(DPPM)₂. Unter den gewöhnlichen Salzen beeinträchtigt nur NaCl in hoher Konzentration die Extraktion in geringem Maß. Das Metall kann aus der organischen Phase mit wäßrigen Oxalat-, Citrat- oder Acetatlösungen in einem Arbeitsgang rückextrahiert werden. Die Verteilungskoeffizienten und Trennungsfaktoren für einige Metallionen in bezug auf Zink in 0,2M Kaliumrhodanid bei optimaler Mineralsäurekonzentration wurden angegeben. Das Verfahren eignet sich für die gleichzeitige Anreicherung toxischer Metalle, wie Zn, Cu und Hg aus neutraler Lösung bei der Untersuchung der Gewässerverunreinigung.

     

Inorganic Anionic Oxygen-Containing α-Nucleophiles-Effective Acyl Group Acceptors: Hydroxylamine Ranks First among the α-Nucleophile Series

Comparative analysis of the nucleophilicity of inorganic oxygen-containing -nucleophiles (hydroxylamine and ClO^-, BrO^--, HOO^--, NH₂O^-, and F^- ions) covering the pK _a range from -2 to 13.81 toward 4-nitrophenyl esters (4-nitrophenyl acetate, 4-nitrophenyl p-toluenesulfonate, diethyl 4-nitrophenyl phosphate, ethyl 4-nitrophenyl ethylphosphonate, and 4-nitrophenyl dimethylcarbamate) in water at 25°C (ionic strength 1.0, KCl) was performed in terms of the extrathermodynamic Brönsted relation. It was found for the first time that hydroxylamine anion ranks first among the series of -nucleophiles. It is more reactive than HOO^- ion with respect to 4-nitrophenyl acetate (by a factor of 8), 4-nitrophenyl p-toluenesulfonate (by a factor of 4) and 4-nitrophenyl dimethylcarbamate (by a factor of 10). The nucleophilicities of HOO^- and NH₂O^- ions toward diethyl 4-nitrophenyl phosphate and ethyl 4-nitrophenyl ethylphosphonate are comparable. Taking into account that neutral hydroxylamine exhibits an anomalously high reactivity, as compared to not only common organic but also inorganic -nucleophiles, it may be regarded as a unique -nucleophile. Both neutral hydroxylamine and its anion as O-nucleophiles ensure high rates of acyl group transfer throughout a wide range of pH.     

Transference Numbers of NaCl in Aqueous Mixtures with Organic Solvents of Moderate to Low Permittivities

Electromotive forces (emf) were measured in the transference cells: AgAgCl- Nacl (m₂) in Z NaCl (m₁) in ZAgClAg and Na_xHg_1-xNaCl (m₁) in Z NaCl (m₂) in ZNa_xHg_1-x (where Na_xHg_1-x denotes a flowing Na–amalgam electrode and Z an aqueous-organic solvent mixture) at various molalities m ₂ > m₁ of NaCl in Z = (ethylene glycol + water), (acetonitrile + water) and (1,4-dioxane + water), with mass fractions of the organic components 0.8. The transference number of Na⁺ in (ethylene glycol + water) and (1,4-dioxane + water) varies little with respect to that in pure water medium, whereas in (acetonitrile + water) it increases remarkably with increasing proportion of acetonitrile so as to approach equitransference, behavior similar to that previously found in (methanol + water) and in (ethanol + water). At acetonitrile mass fraction 0.6 NaCl is sufficiently close to equitransference to emerge as a useful salt bridge, nearly at the same level as the popular aqueous KCl.     

Laboratory studies on the adsorption behavior of americium

With increasing global nuclear activities, there is a growing interest in understanding the migration behavior of transuranic elements in the terrestrial environment. The laboratory investigations on the adsorption behavior of AM(III) (10^–7M) in aqueous solutions showed that there was not adsorption of Am(III) on glass or polyethylene vials from aqueous solutions at pH<3. The rate of adsorption was found to be inversely related to the (H⁺) in the pH range 4–7. It was also found to be strongly influenced by stirring/shaking as well as by the presence of particulate matter in the aqueous phase. The presence of particulate matter (>0.6 m) in the aqueous solutions significantly inhibits the adsorption rate. Attempts to fit the kinetic data (collected on filtered [particle size >0.6 m] or unfiltered distilled water at pH 6) to the reversible or irreversible first order rate equation did not successfully indicate the complexity of the adsorption process. The presence of 20mg/liter of humic acid at pH 6.3 completely inhibits the adsorption of Am on glass surfaces.     

Radiochemical determination of Caesium-137, strontium-89,90 and barium-140 in milk and bone ash

Summary A method for the determination of radiocaesium, radiostrontium, radiobarium in milk and bone ash is described. An alkaline fusion of ash followed by leaching with water provides for the preliminary separation of radiocaesium. After dissolution of leaching residue in hydrochloric acid and sorption on Dowex 50 W, X-8, radioyttrium (rare earths fission products), magnesium and calcium are eluted with 1.0 M ammonium lactate, pH 7.5. Radiostrontium, radiobarium and radium are separated by elution with 0.15 M ammonium citrate, pH 7.5. ¹³⁷Cs is isolated as Cs-dipicrylaminate, ⁸⁹Sr/⁹⁰Sr as SrCO₃, ¹⁴⁰Ba as BaCO₃ and counted on a low-background beta-counter. For determined radionuclides the average chemical yields amount to 80%. The limits of detection for ¹³⁷Cs, ⁹⁰Sr, ¹⁴⁰Ba are 0.02 pCi/g with a 10 g sample of milk ash and 0.04 pCi/g with a 4 g sample of bone ash, respectively.

---

Radiochemische Bestimmung von Caesium-137, Strontium-89,90 und Barium-140 in Milch- und Knochenasche

Zusammenfassung Zur Vorabtrennung von Radio-Caesium wird die Ascheprobe alkalisch geschmolzen und dann mit Wasser ausgelaugt. Nach Auflösung des ausgelaugten Rückstandes in Salzsäure und Sorption an Dowex 50 W, X-8 werden Yttrium (Spaltprodukte der Seltenen Erden), Magnesium und Calcium mit 1,0 M Ammoniumlactat, pH 7,5 eluiert. Radio-Strontium, Radio-Barium und Radium werden durch Elution mit 0,15 M Ammoniumcitrat, pH 7,5, abgetrennt. ¹³⁷Cs wird als Cs-Dipikrylaminat isoliert, ⁸⁹Sr/⁹⁰Sr als SrCO₃,¹⁴⁰Ba als BaCO₃; gemessen wird in einem Beta-Antikoincidenzzähler. Für die bestimmten Radio-Nuklide beträgt die durchschnittliche Rückgewinnung 80%. Die unteren Nachweisgrenzen für ¹³⁷Cs, ⁹⁰Sr, ¹⁴⁰Ba betragen bei einer 10 g-Milchasche-Probe 0,02 pCi/g und bei einer 4 g-Knochenasche-Probe 0,04 pCi/g.

     

Molecular bases of stress relaxation and viscosity of polymers, 1a) New empirical relations

Experiments with several polymers led to new relations which describe stress relaxation at small shears and show the influence of the molecular structure on relaxation. Bubble-free melts of anionically polymerized polystyrenes with the molecular masses (relative molecular mass is referred to as molecular mass throughout this paper)M=6 10² to 1.8 10⁶ g mol^–1 and their blends are studied at several temperatures and at timest>3 ms. As the stress (10² to 10⁶ Pa) deforms the rheometer, a new mathematical method was developed to correct the relaxations. The energy-elastic stress is separated from the entropy-elastic stress. The relaxations of the latter do not confirm the Rouse theory as is proportional to exp (–¦t ^1/2¦) forM<4000. For M>4000 the relaxations deviate from the theoretical functions as well. The initial modulus G(0) then depends onM, and is not proportional to ¦t ^–1/2¦. A new and simple function describes the relaxation of melts with entangled molecules at long times. The influences of concentration and chemical structure on relaxation are formulated for weak intermolecular forces. Published data for the constantD of self-diffusion are used in calculating values ofD for a constant free volume making use of the initial velocity of relaxation and its dependence on temperature. ThenDM ^–1 holds forM<1.3 10⁴ andDM ^–2 for largerM. Correct values of viscosity are calculated from the empirical functions of stress relaxation.Part 2 cf.In memoriam Professor Dr. Drs. h.c. Otto Bayer     

Effect of the chemical structure of nitroxyl radicals on their reactivity in the reaction with hydrazobenzene and tetranitromethane

The reaction rate constants of reduction of stable radicals of different classes by hydrazobenzene in hexane at 20C, in the range of 0.4–5·10³ M^–1sec^–1, were determined; a single scale of the oxidative properties of stable nitroxyl radicals was constructed. The rate constants of oxidation of a series of nitroxyl radicals by tetranitromethane in aqueous medium at 20C, in the range of 0.06–10 M^–1·sec^–1, were determined. It was shown that the oxidative properties of the nitroxyl group decrease slightly with an increase in its reducing properties for nitroxyl radicals of the piperidine and imidazoline series in reactions with ascorbic acid and tetra-nitromethane in aqueous medium, respectively.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2575–2582, November, 1990.     

Tail-end purification of americium from plutonium loading effluents using a mixture of octyl (phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide and tri-N-butyl phosphate

The tail-end purification of Am from Pu loading effluents in 7.5M HNO₃ containing 160 mg l^–1 Am and 1.2 mg l^–1 Pu has been carried out. With 0.2M CMPO+1.2M TBP in dodecane as the extractant and stripping by 0.04M HNO₃+0.05M NaNO₂, the Pu level is brought down to 31.2 g l^–1. When the acidity was reduced to 4.2M HNO₃, one contact with 20% TLA/dodecane and subsequent extraction by a mixture of CMPO and TBP and stripping with 0.04M HNO₃+0.05M NaNO₂ gave Am samples without any detectable amounts of Pu. The recovery of Am was 90% by the first procedure and 98% by the second one.     

Diffusion of deuterium into silicon single crystals: An investigation with SIMS

Summary Silicon single crystals were annealed at various temperatures between 25 and 350° C in a deuterium discharge and were subsequently analyzed with Secondary Ion Mass Spectrometry (SIMS). Beginning at the surface, the deuterium signal decays exponentially to the interior (decay length 30 nm under bombardment with 9-keV O ₂ ⁺ J ions). The influence of the bombarding energy on the decay length and the disappearance of the deuterium signal after a treatment with HF show that the deuterium profile is due to an ion beam-induced effect. It is concluded from investigations of boron-doped crystals (both implanted and diffused B) that a surface barrier exists for the indiffusion of deuterium, probably the native oxide layer. The permeation rate of deuterium through this barrier is 2×10¹¹ atoms/cm²s at 350° C and decreases strongly with decreasing temperature.

---

Diffusion von Deuterium in Silicium-Einkristalle: eine Untersuchung mit SIMS

Zusammenfassung Silicium-Einkristalle wurden bei verschiedenen Temperaturen zwischen 25° C und 350° C in einer Deuteriumentladung getempert und anschließend mittels der Sekundärionen-Massenspektrometrie (SIMS) untersucht. Ausgehend von der Oberfläche nimmt das Deuteriumsignal exponentiell mit der Tiefe ab (Abklinglänge 30 nm bei 9 keV O ₂ ⁺ -Beschuß). Das Verschwinden dieses Oberflächenpeaks nach einer Behandlung mit HF und die Abhängigkeit der Abklinglänge von der Beschußenergie zeigen, daß ein Ionenstrahl-induzierter Effekt vorliegt. Untersuchungen Bor-dotierter Kristalle lassen auf die Existenz einer Oberflächenbarriere, wahrscheinlich die Oxidschicht, für die Eindiffusion von Deuterium schließen. Die Permeation von Deuterium durch diese Barriere beträgt 2×10¹¹ Atome/cm² s bei 350°C und nimmt mit abnehmender Temperatur stark ab.

     

Gamma radiolysis of Methyl Red solution and reaction induced by γ-irradiated NaCl in Methyl Red

The -radiolysis of Methyl Red solution in HCl medium at pH=2 has been studied along with energy transfer reaction brought about byF and hole centers of -irradiated NaCl. The G-values for degradation of the azo dye indicator by radiolysis and -irradiated salt were determined as 9·10^–1 and 4.8·10^–3, respectively. The kinetic rate constants (k) of degradation are evaluated as 2·10^–5 rad^–1 in the case of direct radiolysis, while for the irradiated salt it is 2·10^–7 rad^–1. The extent of degradation by direct -radiolysis is 100–200 times greater as compared to that by the -irradiated salt. The same mechanism is proposed for radiolysis as well as the reaction induced by -irradiated sodium chloride.