Germyl- and germylene-bridged complexes of Rh/Ir and subsequent chemistry of a bridging germylene group

A series of neutral and cationic germylene-bridged complexes and a neutral germyl(germylene) complex have been synthesized and characterized by NMR spectroscopy and X-ray crystallography. Reaction of 1 equiv of primary germanes, RGeH(3) (R = Ph, (t)Bu), with [RhIr(CO)(3)(dppm)(2)] (1) at low-temperature yields [RhIr(GeH(2)R)(H)(CO)(3)(dppm)(2)] (R = Ph (3) or (t)Bu (4)), the products of single Ge-H bond activation, which upon warming transform to the germylene-bridged dihydrides, [RhIr(H)(2)(CO)(2)(μ-GeHR)(dppm)(2)] (R = Ph (5) or (t)Bu (6)) by activation of a second Ge-H bond accompanied by CO loss. Both classes of compounds have the diphosphines folded back in a "cradle-shaped" geometry. Although compound 5 reacts with additional phenylgermane at -40 °C to give a germylene-bridged/germyl product, [RhIr(GeH(2)Ph)(H)(2)(CO)(2)(κ(1)-dppm)(μ-GeHPh)(μ-H)(dppm)] (7), warming results in decomposition. However, reaction of 5 with 1 equiv of diphenylgermane at ambient temperature results in a novel mixed bis(μ-germylene) complex, [RhIr(CO)(2)(μ-GeHPh)(μ-GePh(2))(dppm)(2)] (8), containing both mono- and disubstituted germylene fragments. Reaction of 1 equiv of diphenylgermane with complex 1 produces a similar monogermylene-bridged product, [RhIr(H)(2)(CO)(2)(μ-GePh(2))(dppm)(2)] (9), while reaction of 1 with 2 equiv of diphenylgermane yields the germyl/germylene product [RhIr(H)(GeHPh(2))(CO)(3)(κ(1)-dppm)(μ-GePh(2))(dppm)] (10). The above reactions, incorporating first one and then a second equivalent of primary and secondary germanes, were studied by low-temperature multinuclear NMR spectroscopy, revealing details about the stepwise activations of multiple Ge-H bonds. Reaction of diphenylgermane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] (2) leads to a cationic A-frame-type germylene- and hydride-bridged product, [RhIr(CO)(2)(μ-H)(μ-GePh(2))(dppm)(2)][CF(3)SO(3)] (3), which reversibly activates H(2), yielding a germyl-bridged dihydride and reacts stoichiometrically with water, methanol, and HCl to yield the respective germanol, germamethoxy, and germylchloride products.     

The effect of micro-CN linkage isomerism and ancillary ligand set on directional metal-metal charge-transfer in cyanide-bridged dimanganese complexes

The reaction of [Mn(CN)L'(NO)(eta(5)-C(5)R(4)Me)] with cis- or trans-[MnBrL(CO)(2)(dppm)], in the presence of Tl[PF(6)], gives homobinuclear cyanomanganese(i) complexes cis- or trans-[(dppm)(CO)(2)LMn(micro-NC)MnL'(NO)(eta(5)-C(5)R(4)Me)](+), linkage isomers of which, cis- or trans-[(dppm)(CO)(2)LMn(micro-CN)MnL'(NO)(eta(5)-C(5)R(4)Me)](+), are synthesised by reacting cis- or trans-[Mn(CN)L(CO)(2)(dppm)] with [MnIL'(NO)(eta(5)-C(5)R(4)Me)] in the presence of Tl[PF(6)]. X-Ray structural studies on the isomers trans-[(dppm)(CO)(2){(EtO)(3)P}Mn(micro-NC)Mn(CNBu(t))(NO)(eta(5)-C(5)H(4)Me)](+) and trans-[(dppm)(CO)(2){(EtO)(3)P}Mn(micro-CN)Mn(CNBu(t))(NO)(eta(5)-C(5)H(4)Me)](+) show nearly identical molecular structures whereas cis-[(dppm)(CO)(2){(PhO)(3)P}Mn(micro-NC)Mn{P(OPh)(3)}(NO)(eta(5)-C(5)H(4)Me)](+) and cis-[(dppm)(CO)(2){(PhO)(3)P}Mn(micro-CN)Mn{P(OPh)(3)}(NO)(eta(5)-C(5)H(4)Me)](+) differ, effectively in the N- and C-coordination respectively of two different optical isomers of the pseudo-tetrahedral units (NC)Mn{P(OPh)(3)}(NO)(eta(5)-C(5)H(4)Me) and (CN)Mn{P(OPh)(3)}(NO)(eta(5)-C(5)H(4)Me) to the octahedral manganese centre. Electrochemical and spectroscopic studies on [(dppm)(CO)(2)LMn(micro-XY)MnL'(NO)(eta(5)-C(5)R(4)Me)](+) show that systematic variation of the ligands L and L', of the cyclopentadienyl ring substituents R, and of the micro-CN orientation (XY = CN or NC) allows control of the order of oxidation of the two metal centres and hence the direction and energy of metal-metal charge-transfer (MMCT) through the cyanide bridge in the mixed-valence dications. Chemical one-electron oxidation of cis- or trans-[(dppm)(CO)(2)LMn(micro-NC)MnL'(NO)(eta(5)-C(5)R(4)Me)](+) with [NO][PF(6)] gives the mixed-valence dications trans-[(dppm)(CO)(2)LMn(II)(micro-NC)Mn(I)L'(NO)(eta(5)-C(5)R(4)Me)](2+) which show solvatochromic absorptions in the electronic spectrum, assigned to optically induced Mn(I)-to-Mn(II) electron transfer via the cyanide bridge.     

Multiple silicon-hydrogen bond activations at adjacent rhodium and iridium centers

The reaction of 1 equiv of primary silanes, SiH(3)R (R = Ph, Mes), with [RhIr(CO)(3)(dppm)(2)] yields mono(silylene)-bridged complexes of the type [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (R = Ph or Mes), while for R = Ph the addition of 2 equiv yields the bis(silylene)-bridged complexes, [RhIr(CO)(2)(μ-SiHPh)(2)(dppm)(2)]. The kinetic isomer of this bis(silylene)-bridged product has the phenyl substituent axial on one silylene unit and equatorial on the other, and in the presence of excess silane this rearranges to the thermodynamically preferred "axial-axial" isomer, in which the phenyl substituents on each bridging silylene unit are axial and parallel to one another. The reaction of 1 equiv of diphenylsilane with [RhIr(CO)(3)(dppm)(2)] produces the mono(silylene)-bridged product, [RhIr(H)(2)(CO)(2)(μ-SiPh(2))(dppm)(2)], and the subsequent addition of silane in the presence of CO yields the silyl/silylene product [RhIr(H)(SiPh(2)H)(CO)(3)(κ(1)-dppm)(μ-SiPh(2))(dppm)]. The reaction of [RhIr(CO)(3)(dppm)(2)] with 2 equiv of SiH(2)Me(2) yields the analogous product [RhIr(H)(SiMe(2)H)(CO)(3)(κ(1)-dppm)(μ-SiMe(2))(dppm)]. Low-temperature NMR spectroscopic observation of some key intermediates, such as [RhIr(H)(SiH(2)Ph)(CO)(2)(μ-CO)(dppm)(2)], formed during the formation of the mono(silylene)-bridged species provides evidence for a mechanism involving initial Si-H bond activation at Rh, followed by the subsequent Si-H bond activation at Ir. The Si-H bond activation of a second equivalent of silane seems to be initiated by dissociation of the Rh-bound end of one diphosphine. The reaction of diphenylsilane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] gives rise to a different reactivity pattern in which Si-H bond activation is initiated at Ir. In this case, the cationic silyl-bridged species, [RhIr(CH(3))(CO)(2)(κ(1):η(2)-SiHPh(2))(dppm)(2)][CF(3)SO(3)], contains an agostic Si-H interaction with Rh. In solution, at ambient temperature, this complex converts to two species, [RhIr(H)(COCH(3))(CO)(μ-H)(μ-SiPh(2))(dppm)(2)][CF(3)SO(3)] and [RhIr(CO)(2)(μ-H)(μ-SiPh(2))(dppm)(2)] [CF(3)SO(3)], formed by the competing methyl migration to CO and reductive elimination of methane, respectively. In the diphenylsilylene dihydride product, a weak interaction between the bridging silicon and the terminal Ir-bound hydride is proposed on the basis of NMR evidence.     

Unusual ligand transformations initiated by dppm deprotonation in methylene-bridged Rh/Os complexes

The reaction of [RhOs(CO)(3)(μ-CH(2))(dppm)(2)][CF(3)SO(3)] (dppm = μ-Ph(2)PCH(2)PPh(2)) with 1,3,4,5-tetramethylimidazol-2-ylidene (IMe(4)) results in competing substitution of the Rh-bound carbonyl by IMe(4) and dppm deprotonation by IMe(4) to give the two products [RhOs(IMe(4))(CO)(2)(μ-CH(2))(dppm)(2)][CF(3)SO(3)] and [RhOs(CO)(3)(μ-CH(2))(μ-κ(1):η(2)-dppm-H)(dppm)] [3; dppm-H = bis(diphenylphosphino)methanide], respectively. In the latter product, the dppm-H group is P-bound to Os while bound to Rh by the other PPh(2) group and the adjacent methanide C. The reaction of the tetracarbonyl species [RhOs(CO)(4)(μ-CH(2))(dppm)(2)][CF(3)SO(3)] with IMe(4) results in the exclusive deprotonation of a dppm ligand to give [RhOs(CO)(4)(μ-CH(2))(μ-κ(1):κ(1)-dppm-H)(dppm)] (4) in which dppm-H is P-bound to both metals. Both deprotonated products are cleanly prepared by the reaction of their respective precursors with potassium bis(trimethylsilyl)amide. Reversible conversion of the μ-κ(1):η(2)-dppm-H complex to the μ-κ(1):κ(1)-dppm-H complex is achieved by the addition or removal of CO, respectively. In the absence of CO, compound 3 slowly converts in solution to [RhOs(CO)(3)(μ-κ(1):κ(1):κ(1)-Ph(2)PCHPPh(2)CH(2))(dppm)] (5) as a result of dissociation of the Rh-bound PPh(2) moiety of the dppm-H group and its attack at the bridging CH(2) group. Compound 4 is also unstable, yielding the ketenyl- and ketenylidene/hydride tautomers [RhOs(CO)(3)(μ-κ(1):η(2)-CHCO)(dppm)(2)] (6a) and [RhOs(H)(CO)(3)(μ-κ(1):κ(1)-CCO)(dppm)(2)] (6b), initiated by proton transfer from μ-CH(2) to dppm-H. Slow conversion of these tautomers to a pair of isomers of [RhOs(H)(CO)(3)(μ-κ(1):κ(1):κ(1)-Ph(2)PCH(COCH)PPh(2))(dppm)] (7a and 7b) subsequently occurs in which proton transfer from a dppm group to the ketenylidene fragment gives rise to coupling of the resulting dppm-H methanide C and the ketenyl unit. Attempts to couple the ketenyl- or ketenylidene-bridged fragments in 6a/6b with dimethyl acetylenedicarboxylate (DMAD) yield [RhOs(κ(1)-CHCO)(CO)(3)(μ-DMAD)(dppm)(2)], in which the ketenyl group is terminally bound to Os.     

High structural control in metal-mediated synthesis of new functionalized diphosphines using diphosphinoketenimines as precursors

The diphosphinoketenimine ligand in the neutral complexes fac-[MnI(CO)(3){(PPh(2))(2)C=C=NR}] (1 a: R = Ph; 1 b: R = p-tolyl) undergoes nucleophilic attack by MeLi and nBuMgCl yielding, after hydrolysis, the diphosphinoenamine-containing complexes fac-[MnI(CO)(3){(PPh(2))(2)C=C(R')NHR}] (3 a,b: R' = Me; 4 a,b: R' = nBu). Complex 1 a reacts under the same conditions with H(2)C=C=CHMgBr to afford fac-[MnI(CO)(3){(PPh(2))(2)C=C(CH(2)CC[triple chemical bond]CH)NHR}] (5 a), which contains a terminal alkyne group on the alpha-carbon atom of the diphosphinoenamine ligand. The cationic complexes fac-[Mn(CO)(4){(PPh(2))(2)C=C=NR}](+) (6) react with H(2)C=C=CHMgBr to afford diphosphinomethanide derivatives bearing three different types of functional groups, depending upon the substituent on the nitrogen atom of the ketenimine: cumulene in fac-[Mn(CO)(4){(PPh(2))(2)C--C(CH=C=CH(2))=N-xylyl}] (7 d), internal alkyne in fac-[Mn(CO)(4){(PPh(2))(2)C--C(C[triple chemical bond]CCH(3))=NtBu}] (8), and quinoline in 9 (R = Ph), whose formation implies an unusual cyclization process. Protonation of 7 d, 8, and 9 with HBF(4) occurs at the nitrogen atom to give the cationic derivatives 10 d, 11, and 12, respectively, which contain the corresponding functionalized diphosphine ligands. Irradiation of 3 a,b and 4 a,b with Vis/UV light makes it possible to isolate the free ligands (PPh(2))(2)C=C(R')NHR (13 a,b and 14 a,b), completing the metal-assisted synthesis of these novel functionalized diphosphines. Irradiation of 12 with Vis/UV light generates free phosphinoquinoline ligand 15, which readily affords a complex 16 containing 15 as a P,N-chelating ligand when treated with [PdCl(2)(NCMe)(2)], thus demonstrating its coordination capability.     

Chiral hexanuclear ferric wheels

The homochiral iron(III) wheels [Fe(6){(S)-pedea}(6)Cl(6)] and [Fe(6){(R)-pedea)}(6)Cl(6)] [(R)- and (S)-2; pedea = phenylethylaminodiethoxide] exhibit high optical activities and antiferromagnetic exchange. These homochiral products react with each other, producing the centrosymmetric, crystallographically characterized [Fe(6){(S)-pedea}(3){(R)-pedea}(3)Cl(6)] diastereomer [(RSRSRS)-2]. (1)H NMR and UV-vis studies indicate that exchange processes are slow in both homo- and heterochiral systems but that, upon combination, the reaction between (R)- and (S)-2 occurs quickly.     

Mixed Bis(μ-silylene) and (μ-Silylene)/(μ-Germylene) Complexes Involving the Rh/Ir Metal Combination: Nature of the Si···Si Interactions in the Bis(μ-silylene) Species

A series of mixed bis(μ-silylene) complexes of rhodium and iridium [RhIr(CO)(2)(μ-SiHR)(μ-SiR(1)R(2))(dppm)(2)] (R = R(1) = R(2) = Ph (4); R = R(1) = Ph, R(2) = Cl (5); R = R(1) = Ph, R(2) = Me (6); R = 3,5-C(6)H(3)F(2), R(1) = Ph, R(2) = Me (7); R = 3,5-C(6)H(3)F(2), R(1) = 2,4,6-C(6)H(2)Me(3), R(2) = H (8)) have been synthesized by the reaction of the silylene-bridged dihydride complexes, [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (1, R = Ph; 2, R = C(6)H(3)F(2)), with a number of secondary or primary silanes (Ph(2)SiH(2), PhClSiH(2), PhMeSiH(2), C(6)H(2)Me(3)SiH(3)). The influence of substituents and π-stacking interactions on the Si···Si distance (determined by X-ray crystallography) in this series and the implications regarding the nature of the Si···Si interactions are discussed. A series of novel (μ-silylene)/(μ-germylene) complexes, [RhIr(CO)(2)(μ-SiHPh)(μ-GePh(2))(dppm)(2)] (9) and [RhIr(CO)(2)(μ-SiR(1)R(2))(μ-GeHPh)(dppm)(2)] (R(1) = Ph, R(2) = H (11); R(1) = R(2) = Ph (12); R(1) = Ph, R(2) = Me (13)), have also been synthesized by reaction of the silylene-bridged dihydride complex, [RhIr(H)(2)(CO)(2)(μ-SiHPh)(dppm)(2)] (1), with 1 equiv of diphenylgermane and by reaction of the germylene-bridged dihydride complex, [RhIr(H)(2)(CO)(2)(μ-GeHPh)(dppm)(2)] (3), with 1 equiv of the respective silanes. These complexes have been characterized by multinuclear NMR spectroscopy and X-ray crystallography.     

The reactions of pyridinyl thioesters with triiron dodecacarbonyl: their novel diiron carbonyl complexes and mechanistic investigations

Reaction of Fe(3)(CO)(12) with pyridinyl thioester ligand PyCH(2)SCOCH(3) (L(1), Py = pyridin-2-yl) produced complex, [Fe(2)(κ-COCH(3))(μ-SCH(2)Py)(CO)(5)] (1) (PyCH(2)S = pyridin-2-ylmethanethiolate). When complex 1 reacted with PPh(3), a monosubstituted complex, [Fe(2)(κ-COCH(3))(μ-SCH(2)Py)(CO)(4)PPh(3)] (2), was derived. Reaction of the same precursor with analogous thioester ligand PyCH(2)SCOPy (L(2)) generated three novel diiron complexes, [Fe(2)(κ-Py)(μ-SCH(2)Py)(CO)(5)] (3), [Fe(2)(κ-Py)'(μ-SCH(2)Py)(CO)(5)] (4), and [Fe(2)(κ-Py)(μ-SCH(2)Py)(CO)(6)] (5). Complexes 3 and 4 are structural isomers. Complex 5 could be converted into complex 4 but the conversion from complex 5 to the isomer 3 was not observed. All the five complexes were fully characterised using FTIR, NMR, and other techniques. Their structures were determined using X-ray single crystal diffraction analysis. The oxidative formation of complexes 1, 3, 4, and 5 involved C-S and/or C-C bonds cleavages. To probe possible mechanisms for these cleavages, DFT calculations were performed. From the calculations, viable reaction pathways leading to the formation of all the isolated products were delineated. The results of the theoretic calculations also allowed rationalisation of the experimental observations.     

Synthesis and Crystal Structure of Bis(μ-bis(diphenyl-phosphino)methane)(μ-benzenethiolate)(acetonitrile)Dicopper(I) Perchlorate Diethylether Solvate

The reaction between [Cu2(μ-dppm)2(MeCN)4](ClO4)2(dppm=bis(diphenylphos-phino)methane) and [Zn(PhS)2(bpy)] (bpy=2,2'-bipyridine,PhS=benzenethiolate) gave the complex [Cu2(μ-dppm)2(μ-PhS)(MeCN)]ClO4·0.5(Et2O)(C58H52ClNO4P4SCu2·0.5Et2O) which was determined by X-ray single-crystal diffraction.The crystal is of orthorhombic,space group P212121 with a=13.6157(3),b=20.8022(6),c=21.3299(6)A,V=6041.4(3) A3,Mr=1182.54,Dc=1.300 g/cm3,F(000)=2444,μ=0.934 mm-1 and Z=4.The final R=0.0773 and wR=0.1843 for 7744 observed reflections (I>2σ(I)).The dicopper atoms are doubly bridged by dppm as well as one S donor from benzenethiolate.One copper atom is in a distorted trigonal bipyramidal environ- ment,whereas the other adopts a distorted tetrahedral geometry.     

Behavior of neutral phosphido derivatives of platinum and palladium toward silver centers

The reaction of the neutral binuclear complexes [(R(F))(2)Pt(μ-PPh(2))(2)M(phen)] (phen = 1,10-phenanthroline, R(F) = C(6)F(5); M = Pt, 1; M = Pd, 2) with AgClO(4) or [Ag(OClO(3))(PPh(3))] affords the trinuclear complexes [AgPt(2)(μ-PPh(2))(2)(R(F))(2)(phen)(OClO(3))] (7a) or [AgPtM(μ-PPh(2))(2)(R(F))(2)(phen)(PPh(3))][ClO(4)] (M = Pt, 8; M = Pd, 9), which display an "open-book" type structure and two (7a) or one (8, 9) Pt-Ag bonds. The neutral diphosphine complexes [(R(F))(2)Pt(μ-PPh(2))(2)M(P-P)] (P-P = 1,2-bis(diphenylphosphino)methane, dppm, M = Pt, 3; M = Pd, 4; P-P = 1,2-bis(diphenylphosphino)ethane, dppe, M = Pt, 5; M = Pd, 6) react with AgClO(4) or [Ag(OClO(3))(PPh(3))], and the nature of the resulting complexes is dependent on both M and the diphosphine. The dppm Pt-Pt complex 3 reacts with [Ag(OClO(3))(PPh(3))], affording a silver adduct 10 in which the Ag atom interacts with the Pt atoms, while the dppm Pt-Pd complex 4 reacts with [Ag(OClO(3))(PPh(3))], forming a 1:1 mixture of [AgPdPt(μ-PPh(2))(2)(R(F))(2)(OClO(3))(dppm)] (11), in which the silver atom is connected to the Pt-Pd moiety through Pd-(μ-PPh(2))-Ag and Ag-P(k(1)-dppm) interactions, and [AgPdPt(μ-PPh(2))(2)(R(F))(2)(OClO(3))(PPh(3))(2)][ClO(4)] (12). The reaction of complex 4 with AgClO(4) gives the trinuclear derivative 11 as the only product. Complex 11 shows a dynamic process in solution in which the silver atom interacts alternatively with both Pd-μPPh(2) bonds. When P-P is dppe, both complexes 5 and 6 react with AgClO(4) or [Ag(OClO(3))(PPh(3))], forming the saturated complexes [(PPh(2)C(6)F(5))(R(F))Pt(μ-PPh(2))(μ-OH)M(dppe)][ClO(4)] (M = Pt, 13; Pd, 14), which are the result of an oxidation followed by a PPh(2)/C(6)F(5) reductive coupling. Finally, the oxidation of trinuclear derivatives [(R(F))(2)Pt(II)(μ-PPh(2))(2)Pt(II)(μ-PPh(2))(2)Pt(II)L(2)] (L(2) = phen, 15; L = PPh(3), 16) by AgClO(4) results in the formation of the unsaturated 46 VEC complexes [(R(F))(2)Pt(III)(μ-PPh(2))(2)Pt(III)(μ-PPh(2))(2)Pt(II)L(2)][ClO(4)](2) (17 and 18, respectively) which display Pt(III)-Pt(III) bonds.     

Coordination chemistry of N-heterocyclic stannylenes: a combined synthetic and Mössbauer spectroscopy study

The N-heterocyclic stannylenes (NHSns), [(Dipp) N(CH(2))(n)N(Dipp)S n] (Dipp = 2,6- (i)Pr(2)C(6)H(3); n = 2, 1; n = 3, 5) and [((t)Bu) N(CHMe)(2)N((t)Bu)S n] (10) are competent ligands toward a variety of transition metal centers, as seen in the complexes [W(CO)(5)·1] (2), [(OC)(4)Fe(μ-1)(2)Fe(CO)(4)] (3), [(OC)(4)Fe(μ-1)Fe(CO)(4)] (4), [Fe(CO)(4)·5](n) (6, n = 1 or 2), [(OC)(4)Fe(μ-5)Fe(CO)(4)] (7), [Ph(3)PPt(μ-1)(2)PtPPh(3)] (8), [Fe(CO)(4)·10] (11), and [(η(5)-C(5)H(5))(OC)(2)Mn·10] (12). X-ray crystallographic studies show that the NHSns are structurally largely unperturbed binding to the metal, but in contrast to the parent NHCs, NHSns often adopt a bridging position across dinuclear metal units. The balance between terminal and bridging positions for the stannylene is evidently closely balanced as shown by the observation of both monomers and dimers for 6 in the solid state and in solution. (119)Sn and (57)Fe Mo?ssbauer spectroscopy of the complexes shows the tin atoms in such complexes to be consistent with electron deficient Sn(II) centers.     

Homobinuclear cyanide-bridged linkage isomers containing the redox-active unit [(micro-XY)Ru(CO)2L(o-O2C6Cl4)] (XY=CN or NC)

The salts [NEt4][Ru(CN)(CO)2L(o-O2C6Cl4)] {L=PPh3 or P(OPh)3}, which undergo one-electron oxidation at the catecholate ligand to give neutral semiquinone complexes [Ru(CN)(CO)2L(o-O2C6Cl4)], react with the dimers [{Ru(CO)2L(micro-o-O2C6Cl4)}2] {L=PPh3 or P(OPh)3} to give [NEt4][(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)] {L or L'=PPh3 or P(OPh)3}. The cyanide-bridged binuclear anions are, in turn, reversibly oxidised to isolable neutral and cationic complexes [(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)] and [(o-O2C6Cl4)L(OC)2Ru(micro-CN)Ru(CO)2L'(o-O2C6Cl4)]+ which contain one and two semiquinone ligands respectively. Structural studies on the redox pair [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)]- and [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)] confirm that the C-bound Ru(CO)2(o-O2C6Cl4) fragment is oxidised first. Uniquely, [(o-O2C6Cl4){(PhO)3P}(OC)2Ru(micro-CN)Ru(CO)2(PPh3)(o-O2C6Cl4)]- is oxidised first at the N-bound fragment, indicating that it is possible to control the site of electron transfer by tuning the co-ligands. Crystallisation of [(o-O2C6Cl4)(Ph3P)(OC)2Ru(micro-CN)Ru(CO)2{P(OPh)3}(o-O2C6Cl4)] resulted in the formation of an isomer in which the P(OPh)3 ligand is cis to the cyanide bridge, contrasting with the trans arrangement of the X-Ru-L fragment in all other complexes of the type RuX(CO)2L(o-O2C6Cl4).     

Reactions of metal carbonyl cluster complexes with multidentate phosphine ligands; preparation of bis(diphenylphosphino)methane derivatives of the trinuclear complexes M3(CO)12 (M = Fe,Ru and Os) and the X-ray crystal structure of Os3(CO)9(μ-dppm)(η1-dppm) (dppm = Ph2pch2ppH2)

The reaction of bis(diphenylphosphino)methane (dppm) with Fe₃(CO)₁₂ gave the known complexes Fe(CO)₄ (dppm), Fe₂(CO)₇ (dppm), in addition to Fe₂CO)₅(dppm)₂. Two new dppm derivatives of Ru₃CO)₁₂, Ru₃(CO)₉(μ-dppm)(η¹-dppm) and Ru₃(CO)₆(dppm)₃ have been isolated and spectroscopically characterised. From the reaction of Os₃(CO)₁₂ with dppm, the derivatives Os₃(CO)₁₀(dppm), Os₃(CO)₉(μ-dppm)(η¹-dppm) and Os₃(CO)₈(dppm)₂ have been isolated. The crystal structure of Os₃(CO)₉(μ-dppm)(η¹-dppm) has been determined.     

Insertion reactions of alkynes and organic isocyanides into the palladium-carbon bond of dimetallic Fe-Pd alkoxysilyl complexes

Insertion of MeO(2)C-C[triple bond]C-CO(2)Me (DMAD) into the Pd-C bond of the heterodimetallic complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d(dmba-C)] (2) (dppm = Ph(2)PCH(2)PPh(2), dmba-C = metallated dimethylbenzylamine) and [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d(8-mq-C,N)] (3) (8-mq-C,N = cyclometallated 8-methylquinoline) yielded the sigma-alkenyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (7) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)[double bond, length as m-dash]C(CO(2)Me)(CH(2)C(9)H(6)N)}] (8), respectively. The latter afforded the adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(CH(2)C(9)H(6)N)}(CNBu(t))] (9) upon reaction with 1 equiv. of Bu(t)NC. The heterodinuclear sigma-butadienyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph=C(Ph)C(CO(2)Me)=(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (11) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph)=C(CO(2)Et)C(Ph)=C(CO(2)Et)(CH(2)C(9)H(6)N)}] (13) have been obtained by reaction of the metallate K[Fe{Si(OMe)(3)}(CO)(3)(dppm-P)] (dppm = Ph(2)PCH(2)PPh(2)) with [P[upper bond 1 start]dCl{C(Ph)=C(Ph)C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)N[upper bond 1 end]Me(2))}] or [P[upper bond 1 start]dCl{C(Ph)=C(CO(2)Et)C(Ph)=(CO(2)Et)}(CH(2)C(9)H(6)N[upper bond 1 end])], respectively. Monoinsertion of various organic isocyanides RNC into the Pd-C bond of 2 and 3 afforded the corresponding heterometallic iminoacyl complexes. In the case of complexes [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end][upper bond 1 start]d{C=(NR)(CH(2)C(9)H(6)N[upper bond 1 end])}] (15a R = Ph, 15b R = xylyl), a static six-membered C,N chelate is formed at the Pd centre, in contrast to the situation in [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=NR)(o-C(6)H(4)CH(2)NMe(2))}] (14a R = o-anisyl, 14b R = 2,6-xylyl) where formation of a mu-eta(2)-Si-O bridge is preferred over NMe(2) coordination. The outcome of the reaction of the dimetallic alkyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe] with RNC depends both on the stoichiometry and the electronic donor properties of the isocyanide employed for the migratory insertion process. In the case of o-anisylisocyanide, the iminoacyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=N-o-anisyl)Me}] (16) results from the reaction in a 1 : 1 ratio. Addition of three equiv. of o-anisylisocyanide affords the tris(insertion) product [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}] (18). After addition of a fourth equivalent of o-anisylNC, exclusive formation of the isocyanide adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}(CN-o-anisyl)] (19) was spectroscopically evidenced. In the complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-C(6)H(4)COCH(2))](2)Me}] (20), the sigma-bound diazabutadienyl unit is part of a 12-membered organic macrocyle which results from bis(insertion) of 1,2-bis(2-isocyanophenoxy)ethane into the Pd-Me bond of the precursor complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe]. In contrast, addition of two equivalents of tert-butylisocyanide to a solution of the latter afforded [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]Fe(mu-dppm)P[upper bond 1 end]d{C(=NBu(t))Me}(CNBu(t))] (21) in which both a terminal and an inserted isocyanide ligand are coordinated to the Pd centre. In all cases, there was no evidence for competing CO substitution at the Fe(CO)(3) fragment by RNC. The molecular structures of the insertion products 8 x CH(2)Cl(2) and 16 x CH(2)Cl(2) have been determined by X-ray diffraction.     

Multimetallic assemblies using piperazine-based dithiocarbamate building blocks

Treatment of cis-[RuCl2(dppm)2] (dppm = bis(diphenylphosphino)methane) with dithiocarbamates, NaS2CNR2 (R = Me, Et) and [H2NC5H10][S2CNC5H10], yields cations [Ru(S2CNR2)2(dppm)2](+) and [Ru(S2CNC5H10)2(dppm)2](+), respectively. The zwitterions S2CNC4H8NHR (R = Me, Et) react with the same metal complex in the presence of base to yield [Ru(S2CNC4H8NR)(dppm)2](+). Piperazine or 2,6-dimethylpiperazine reacts with carbon disulfide to give the zwitterionic dithiocarbamate salts H2NC4H6(R2-3,5)NCS2 (R = H; R = Me), which form the complexes [Ru(S2CNC4H6(R2-3,5)NH2)(dppm)2](2+) on reaction with cis-[RuCl2(dppm)2]. Sequential treatment of [Ru(S2CNC4H8NH2)(dppm)2](2+) with triethylamine and carbon disulfide forms the versatile metalla-dithiocarbamate complex [Ru(S2CNC4H8NCS2)(dppm)2] which reacts readily with cis-[RuCl2(dppm)2] to yield [{Ru(dppm)2}2(S2CNC4H8NCS2)]. Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with [Os(CH=CHC6H4Me-4)Cl(CO)(BTD)(PPh3)2] (BTD = 2,1,3-benzothiadiazole), [Pd(C6H4CH2NMe2)Cl]2, [PtCl2(PEt3)2], and [NiCl2(dppp)] (dppp = 1,3-bis(diphenylphosphino)propane) results in the heterobimetallic complexes [(dppm)2Ru(S2CNC4H8NCS2)ML(n))](m+) (ML(n) = Os(CH=CHC6H4Me-4)(CO)(PPh3)2](+), m = 1; ML(n) = Pd(C,N-C6H4CH2NMe2), m = 1; ML(n) = Pt(PEt3)2, m = 2; ML(n) = Ni(dppp), m = 2). Reaction of [NiCl2(dppp)] with H2NC4H8NCS2 yields the structurally characterized compound, [Ni(S2CNC4H8NH2)(dppp)](2+), which reacts with base, CS2, and cis-[RuCl2(dppm)2] to provide an alternative route to [(dppm)2Ru(S2CNC4H8NCS2)Ni(dppp)](+). A further metalla-dithiocarbamate based on cobalt, [CpCo(S2CNC4H8NH2)(PPh3)](2+), is formed by treatment of CpCoI2(CO) with S2CNC4H8NH2 followed by PPh3. Further reaction with NEt3, CS2, and cis-[RuCl2(dppm)2] yields [(Ph3P)CpCo(S2CNC4H8NCS2)Ru(dppm)2](2+). Heterotrimetallic species of the form [{(dppm)2Ru(S2CNC4H8NCS2)}2M](2+) result from the reaction of [Ru(S2CNC4H8NCS2)(dppm)2] and M(OAc)2 (where M = Ni, Cu, Zn). Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with Co(acac)3 and LaCl3 results in the formation of the compounds [{(dppm)2Ru(S2CNC4H8NCS2)}3Co](3+) and [{(dppm)2Ru(S2CNC4H8NCS2)}3La](3+), respectively. The electrochemical behavior of selected examples is also reported.     

NMR STUDIES ON THE FORMATION OF PALLADIUM-RHODIUM HETERODINUCLEAR COMPLEXES WITH BRIDGING BIS-(DIPHENYLPHOSPHINO)METHANE

<正> Based on proton, carbon-13, and phosphorus-31 NMR and IR spectroscopic studies, three heterodinuclear complexes trans-(NC)2Pd(μ-dppm)2Rh-ClL (where L=P(OEt)3, PPh3and P(p-Tol)3, dppm =Ph2PCH2PPh2) have been i-dentified. They were synthesized by reacting the same starting materials, trans-(NC)2Pd(dppm)2, and [RhCl(cod)]2, with appropriate monophosphine ligands via different intermediates involving different reaction sequences. Other three heterodinuclear complexes, trans-(NC)2Pd(μ-dppm)2PhClL (where L = P(OPh)3, PPh2(p-Tol) , and PPh2(OMe)) , have also beem obtained.     

A dinuclear extension to constrained heteroleptic Cu(I) systems

This article reports the synthesis and optical properties of three dinuclear, cationic copper complexes [Cu(2)(μ-dppm)(2)(μ-L)](NO(3))(2) (dppm diphenyldiphosphinomethane, L: L(A) 3,6-bis(2-pyridyl)-4,5-diphenyl-pyridazine, L(B) 3,6-bis(2-pyridyl)-4,5-di(4-pyridyl)-pyridazine and L(C) 3,6-bis(2-pyridyl)-8,9-diazafluoranthene). These were formed on the reaction of [Cu(μ-dppm)(NO(3))](2) with a series of N-donor (bppn) ligands L. The single crystal X-ray structures of [Cu(2)(μ-dppm)(2)(μ-L)](NO(3))(2)·CH(2)Cl(2) were determined and revealed that in both, the two copper atoms are held by three bridging ligands, two dppm ligands and one bppn ligand acting as a tetradentate bridge. The absorption spectra of the complexes present a MLCT [Cu → π*(N(∧)N)] band in the λ 370-425 nm region. These new complexes exhibit red-orange MLCT-based emission in the solid-state with lifetimes in the microsecond range. In oxygen-free dichloromethane solution, the complex [Cu(2)(μ-dppm)(2)(μ-L(C))](2+) has a long lifetime of 22.8 μs. The long emission lifetimes are attributed to a rigid conformation that precludes the possible distortion of the copper in the excited state.     

Interception of a Rh(I)-Rh(III) dinuclear trihydride complex revealing the dihydrogen activation by [Rh(CO)2{(R,R)-Ph-BPE}

Reaction of [Rh(CO)(2){(R,R)-Ph-BPE}][BF(4)] 1 under 7 bar H(2) provides the dihydride [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 3, which reacts with the neutral hydride [Rh(H)(CO){(R,R)-Ph-BPE}] 2 arising from 3 in THF. The resulting complex is the dimeric monocationic Rh((I))-Rh((III)) complex [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 4.     

Redox-noninnocence of the S,S'-coordinated ligands in bis(benzene-1,2-dithiolato)iron complexes

The electronic structures of complexes of iron containing two S,S'-coordinated benzene-1,2-dithiolate, (L)(2)(-), or 3,5-di-tert-butyl-1,2-benzenedithiolate, (L(Bu))(2)(-), ligands have been elucidated in depth by electronic absorption, infrared, X-band EPR, and Mossbauer spectroscopies. It is conclusively shown that, in contrast to earlier reports, high-valent iron(IV) (d(4), S = 1) is not accessible in this chemistry. Instead, the S,S'-coordinated radical monoanions (L(*))(1)(-) and/or (L(Bu)(*))(1)(-) prevail. Thus, five-coordinate [Fe(L)(2)(PMe(3))] has an electronic structure which is best described as [Fe(III)(L)(L(*))(PMe(3))] where the observed triplet ground state of the molecule is attained via intramolecular, strong antiferromagnetic spin coupling between an intermediate spin ferric ion (S(Fe) = (3)/(2)) and a ligand radical (L(*))(1)(-) (S(rad) = (1)/(2)). The following complexes containing only benzene-1,2-dithiolate(2-) ligands have been synthesized, and their electronic structures have been studied in detail: [NH(C(2)H(5))(3)](2)[Fe(II)(L)(2)] (1), [N(n-Bu)(4)](2)[Fe(III)(2)(L)(4)] (2), [N(n-Bu)(4)](2)[Fe(III)(2)(L(Bu))(4)] (3); [P(CH(3))Ph(3)][Fe(III)(L)(2)(t-Bu-py)] (4) where t-Bu-py is 4-tert-butylpyridine. Complexes containing an Fe(III)(L(*))(L)- or Fe(III)(L(Bu))(L(Bu)(*))- moiety are [N(n-Bu)(4)][Fe(III)(2)(L(Bu))(3)(L(Bu)(*))] (3(ox)()), [Fe(III)(L)(L(*))(t-Bu-py)] (4(ox)()), [Fe(III)(L(Bu))(L(Bu)(*))(PMe(3))] (7), [Fe(III)(L(Bu))(L(Bu)(*))(PMe(3))(2)] (8), and [Fe(III)(L(Bu))(L(Bu)(*))(PPr(3))] (9), where Pr represents the n-propyl substituent. Complexes 2, 3(ox)(), 4, [Fe(III)(L)(L(*))(PMe(3))(2)] (6), and 9 have been structurally characterized by X-ray crystallography.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).