Interfacial rheology of stable and weakly aggregated two-dimensional suspensions

The interfacial rheological properties of stable and weakly aggregated two-dimensional suspensions are studied experimentally using a magnetic rod interfacial rheometer. Particle monolayers with well controlled structures were prepared. Charged polystyrene particles create two-dimensional colloidal crystals at the water-decane interface over a wide range of concentrations. Under similar conditions a predominantly liquid structure is obtained at the water-air interface for the same particles. The addition of appropriate combinations of the anionic surfactant sodiumdodecylsulfate (SDS) and sodium chloride (NaCl) to the aqueous subphase leads to a destabilization of these monolayers with the formation of fractal aggregates at low concentrations and a heterogeneous gel forming as the surface coverage is increased. After the structures have been built up a reproducible structure can be obtained, of which the interfacial rheological properties can be investigated using a magnetic rod stress rheometer. In all cases, numerical calculations were used to assess the importance of instrumental artifacts and the effect of the coupling between surface and subphase flows. The rheology of aggregated suspensions was compared to the reference case of a colloidal crystal. The two-dimensional aggregated suspensions display rheological features which are similar to their three-dimensional counterparts. These include an elastic response with small linearity limits, a power law dependence on surface coverage and a dependence on the strength of attraction. The results shed some light on the possible role of interfacial rheology on the stability of particle laden high interface systems. Additionally, the 2D suspensions could present fundamental insights in the rheological properties of dense colloidal suspensions.     

Water/ionic liquid interfaces as fluid scaffolds for the two-dimensional self-assembly of charged nanospheres

Liquid-liquid interfaces formed between water and ionic liquids serve as fluid scaffolds to self-assemble anionic nanospheres two-dimensionally. When aqueous dispersions of anionic fluorescent polystyrene nanospheres (diameter ～500 nm) are layered on ionic liquids, ordered monolayers are spontaneously formed at the interface. Fluorescent nanospheres are hexagonally packed in the interfacial monolayers, as observed by confocal laser scanning microscopy (CLSM). The adsorption and alignment of nanospheres at the interface are affected by the ionic strength and pH of the aqueous phase, indicating electrostatic interaction as the primary driving force for the self-assembly. CLSM observation of the water/ionic liquid interface reveals that the lower hemisphere of nanospheres is exposed to the ionic liquid phase, which effectively alleviates lateral electrostatic repulsion between charged nanospheres and promotes their close packing. The densely packed monolayer structure of nanospheres is stably immobilized on the surface of CLSM glass dishes simply by rinsing the ionic liquid layer with pure water, probably as a consequence of the gluing effect exerted by imidazolium cations. The fluidic nature of the water/ionic liquid interface facilitates the diffusion and ordering of nanospheres into a hexagonal lattice, and these features render the interface promising soft scaffolds to self-assemble anionic nanomaterials two-dimensionally.     

Effect of charge asymmetry and charge screening on structure of superlattices formed by oppositely charged colloidal particles

Colloidal suspensions made up of oppositely charged particles have been shown to self-assemble into substitutionally ordered superlattices. For a given colloidal suspension, the structure of the superlattice formed from self-assembly depends on its composition, charges on the particles, and charge screening. In this study we have computed the pressure-composition phase diagrams of colloidal suspensions made up of binary mixtures of equal sized and oppositely charged particles interacting via hard core Yukawa potential for varying values of charge screening and charge asymmetry. The systems are studied under conditions where the thermal energy is equal or greater in magnitude to the contact energy of the particles and the Debye screening length is smaller than the size of the particles. Our studies show that charge asymmetry has a significant effect on the ability of colloidal suspensions to form substitutionally ordered superlattices. Slight deviations of the charges from the stoichiometric ratio are found to drastically reduce the thermodynamic stability of substitutionally ordered superlattices. These studies also show that for equal-sized particles, there is an optimum amount of charge screening that favors the formation of substitutionally ordered superlattices.     

Effect of crystallization rate and colloidal stability on structural rearrangements during growth of colloidal monolayers

The structural rearrangements during growth of colloidal crystals were investigated using a combination of light microscopy and image analysis based on a Delaunay triangulation procedure. We followed the creation and disappearance of square lattice domains during the convection-promoted formation of colloidal monolayers by drying. We found that the concentration of square lattice domains increased with the crystal growth rate and that there is a direct relation between the concentration of square lattice domains formed at the crystal-suspension interface and the lower concentration of these domains in the colloidal monolayer; hence, the degree of rearrangement from square lattice domains to a close-packed triangular structure is not significantly affected by the crystal growth rate for colloidally stable suspensions. The colloidal stability, manipulated by the addition of salt, has a profound influence on the structural features of the growing monolayers. Particles that adhere strongly to each other, and to the substrate, tend to resist rearrangement; hence, the defect density is high in the colloidal monolayers and the structural reorganization of the square lattice domains to the more stable close-packed triangular structure occurred gradually over large distances from the crystal-suspension interface.     

The interaction between DNA and cationic lipid films at the air-water interface

The interaction between DNA and positively charged dioctadecyldimethylammonium bromide (DODAB) and DODAB/disteroylphosphatidylcholine (DSPC) monolayers at the air-aqueous interface was studied by a combination of the surface film balance and Brewster angle microscopy. In presence of DNA, the Pi-A isotherm of the cationic monolayer shifts to larger mean molecular areas due to the electrostatic interaction with DNA while the typical liquid expanded-liquid condensed phase transition for DODAB monolayers disappear and the monolayer remains to be in the liquid expanded phase. Furthermore, the morphology of the film dramatically changes, where the large dendritic-like condensed aggregates observed for DODAB monolayers vanish. The charge density of the monolayer was varied by using mixed monolayers with the zwitterionic DSPC and no large effect was observed on the interaction with DNA. By modeling the electrostatic interactions with the linearized Poisson-Boltzmann equation using the finite-element method and taking into account the assumption in the dielectric constants of the system, it was possible to corroborate the expansion of the cationic monolayer upon interaction with DNA as well as the fact that DNA does not seem to penetrate into the monolayer.     

Sum-frequency spectroscopic study of Langmuir monolayers of lipids having oppositely charged headgroups

Sum-frequency vibrational spectroscopy, with the help of surface pressure-area (π-A) isotherm, was used to study lipid Langmuir monolayers composed of molecules with positively and negatively charged headgroups as well as a 1:1 neutral mixture of the two. The spectral profiles of the CH(x) stretch vibrations are similar for all monolayers in the liquid-condensed (LC) phase. They suggest a monolayer structure of closely packed alkyl chains that are nearly all-trans and well oriented along the surface normal. In the liquid-expanded (LE) phase, the spectra of all monolayers appear characteristic of loosely packed chains with significant gauche defects. The OH stretch spectra of interfacial water for both positively and negatively charged monolayers are significantly enhanced in comparison with a neutral water interface, but the phase measurement of SFVS indicates that OH in the two cases points toward the bulk and the interface, respectively. The enhancement results mainly from surface-field-induced polar ordering of interfacial water molecules. For a charge-neutral monolayer composed of an equal number of positively and negatively charged lipid molecules, no such enhancement is observed. This mixed monolayer exhibits a wide range of LC/LE coexistence region extended to very low surface pressure and its CH(x) spectral profile in the coexistence region resembles that of the LC phase. This result suggests that in the LC/LE coexistence region, the mixed monolayer consists of coexisting LC and LE patches in which oppositely charged lipid molecules are homogeneously mixed and dispersed.     

para-Acylcalix[n]arenes: from molecular to macroscopic assemblies

The para-acylcalix[n]arenes possess a very rich capacity to self-assemble into a wide variety of structures and sizes ranging from molecular assemblies through dimeric capsules, molecular sheets to nanoparticles. All these assemblies are capable of taking guest molecules and in the process of this inclusion discrete nanoscopic reaction vessels may be formed for photochemistry. Interestingly this uptake of quite large organic molecules occurs in the bulk in non-porous crystals without loss of crystallinity. At the air-water interface either as Langmuir monolayers or as colloidal suspensions the para-acylcalix[n]arenes show interaction with ionic species. The extension from para-acylcalix[4]arenes to para-acylcalix[8]arenes is in its infancy but already there is much promise for novel assemblies to be found.     

In situ observation of gamma-Fe2O3 nanoparticle adsorption under different monolayers at the air/water interface

We studied the adsorption of gamma-Fe 2O 3 nanoparticles from an aqueous solution under different charged Langmuir monolayers (stearic acid, stearyl alcohol, and stearyl amine). The aqueous subphase was composed of a colloidal suspension of gamma-Fe 2O 3 nanoparticles. The average hydrodynamic diameter of the nanoparticles measured by dynamic light scattering measurements was 16 nm. The observed zeta potential of +40 mV (at pH 4) results in a long-term stability of the colloidal dispersion. The behavior of the different monolayer/nanoparticle composites were studied with surface pressure/area (pi/ A) isotherms. The adsorption of the nanoparticles under the different monolayers induced an expansion of the monolayers. These phenomena depended on the charge of the monolayers. After the Langmuir/Blodgett transfer on glass substrates, the nanoparticle/monolayer composite films were studied by means of UV-vis spectroscopy. The spectra pointed to increasing adsorption of the nanoparticles with increasing electronegativity of the monolayers. On the basis of these results, we studied the in situ adsorption of nanoparticles under the different monolayers by X-ray reflectivity measurements. Electron density profiles of the liquid/gas interfaces were obtained from the X-ray reflectivity data. The results gave clear evidence for the presence of electrostatic interaction between the differently charged monolayers and the positively charged nanoparticles. While the adsorption process was favored by the negatively charged stearic acid monolayer, the positively charged layer of stearyl amine prevented the formation of ultrathin nanoparticle layers.     

Use of UV-vis reflection spectroscopy for determining the organization of viologen and viologen tetracyanoquinodimethanide monolayers

UV-vis reflection spectroscopy has been used for proving in situ the organization of pure viologen and hybrid viologen tetracyanoquinodimethanide monolayers at the air-water interface. Other more classical measurements concerning Langmuir monolayers, including surface pressure-area and surface potential-area isotherms, are also provided. The organization of the viologen in the Langmuir monolayer was investigated upon the different states of compression, and the tilt angle of the viologen moieties with respect to the water surface was determined. A gradual transition of the viologen molecules from a flat orientation in the gas phase to a more tilted position with respect to the water surface in the condensed phases occurs. The addition of a tetracyanoquinodimethane (TCNQ) salt in the subphase leads to the penetration of TCNQ anions into the positively charged viologen monolayer forming a hybrid viologen tetracyanoquinodimethanide film where a charge-transfer interaction between the two moieties is observed. From a quantitative analysis of the reflection spectra, an organization model of these hybrid monolayers at the air-water interface is proposed, suggesting a parallel arrangement of viologen and TCNQ units with a 1:2 stoichiometry.     

Interaction of nitrophenols with lipids at the air/water interface

The uptake of ortho and para nitrophenol to charged and neutral lipid monolayers spread at the air/solution interface was studied by reflection spectroscopy. The adsorption characteristics of the two nitrophenols have been studied by measuring the surface pressure and surface potential as a function of molecular area of the different lipid monolayers in the presence of nitrophenols in the subphase. The results have been interpreted in terms of the electrostatic interaction between the negatively charged dissociated phenolate ions and the positively charged head group of dioctadecyldimethylammonium bromide monolayers.     

Investigation of the protonation state of novel cationic lipids designed for gene transfection

In order to be used in versatile DNA delivery systems, novel cationic lipids were synthesized. The head groups of the new compounds represented by monoamines or oligoamines can be charged or uncharged depending on the environmental pH. Since their pK values are unknown, the protonation properties of these lipids have been studied in a wide pH range. In our experiments, the amphiphilic molecules were organized as a Langmuir monolayer at the air-water interface. Total reflection X-ray fluorescence (TRXF) was used to determine the 2D concentration of bromide counterions bound to a positively charged (protonated) Langmuir monolayer. The protonation rate of the novel cationic lipids was estimated by comparing the fluorescence intensity with that of dioctadecyldimethylammonium bromide monolayers as a reference. TRXF investigations were supplemented with results of film-balance measurements, grazing incidence X-ray diffraction, and X-ray reflectivity data. The results obtained display that the monolayers of all studied compounds are completely uncharged at pH values above 10. In the investigated pH region, the highest protonation rate of the monolayers is observed at pH 3. The influence of the monolayer packing density on the protonation properties is clearly shown.     

Deposition of oriented zeolite A films: in situ and secondary growth

Zeolite A suspensions with a monomodal, narrow particle size distribution have been prepared. The suspended particles in a TMAOH water solution at pH 9 are negatively charged with a zeta potential of −43 mV. Modification of the external surface of the zeolite particles by a silylation reaction produces particles that, when they are suspended in water, are positively charged and have a zeta potential of +40 mV.The suspensions of the negatively or positively charged particles can be used for the preparation of adsorbed layers of particles on oppositely charged substrates by electrostatic attraction. This deposition process leads to a high coverage of the substrate with well-adhered particles. The cubic morphology of the zeolite particles results in preferential orientation after deposition. The particles are oriented with their {h 0 0} planes (cube faces) parallel and perpendicular to the substrate (out-of-plane orientation). The particles are randomly oriented with respect to the direction perpendicular to the substrate (in-plane orientation). Although, under optimized conditions, the coverage is high and only one adsorption cycle is necessary, the particles are not closely packed.Alternately, the zeolite particle suspensions can be used to deposit close-packed arrays of particles by convective particle transport during dip coating on substrates bearing the same charge as the zeolite particles. Using monodispersed zeolite A suspensions and slow speed dip coating close-packed hexagonal colloidal crystals were prepared. The type of colloidal crystal deposits formed range from continuous sublayers, monolayers, or multilayers to isolated discoidal clusters consisting of few zeolite particles. Factors affecting the deposited layer(s) structure are particle concentration of the suspension and withdrawal speed. In addition to close packing, the layers prepared by dip coating exhibit preferred orientation with the particle faces lying parallel and perpendicular to the substrate surface. Moreover, this second route of precursor film formation by colloidal crystallization leads to domains of well-aligned zeolite particles in three dimensions, i.e. with their faces parallel to each other. The oriented domains span the length of several particles; however, low angle boundaries and other defects during colloidal crystallization prevent the formation of macroscopically three-dimensionally ordered zeolite particles.The precursor layers were subjected to secondary growth in order to prepare continuous intergrown films. Secondary growth proceeds initially by local epitaxy on the deposited particles. Later in the process, deposition proceeds by incorporation of particles from solution along with re-nucleation on the growing film. The intergrown films have predominately [h 0 0] out-of-plane orientation; however, after extended secondary growth treatment a population of [h h h] grains appears on the surface of the regrown films.     

Self-assembly of two- and three-dimensional particle arrays by manipulating the hydrophobicity of silica nanospheres

The surface hydrophobicity of colloidal silica (SiO2) nanospheres is manipulated by a chemical graft of alkyl chains with silane coupling agents or by physical adsorption of a cationic surfactant. The surface-modified SiO2 spheres can be transferred from the aqueous phase to organic solvents and readily self-assemble at the water-air interface to form two-dimensional (2D) particle arrays. Closely packed particle monolayers are obtained by adjusting the hydrophilic/hydrophobic balance of the synthesized SiO2 spheres and may further be transferred onto solid substrates layer by layer to form three-dimensional (3D) ordered particle arrays with a hexagonal close-packed (hcp) crystalline structure. The 2D monolayer and 3D multilayer SiO2 films exhibit photonic crystal properties, which were determined by the UV-visible spectroscopic analysis in transmission mode. In the multilayer films, the Bragg diffraction maxima increased with an increase in thickness of the particle layers. The experimentally observed diffraction positions are in good agreement with those that were theoretically calculated.     

DNA-mediated two-dimensional colloidal crystallization above different attractive surfaces

We explore the formation of "floating" two-dimensional colloidal crystals above weakly attractive surfaces that are either positively or negatively charged. In particular, we studied crystal formation above positively charged poly-L-lysine-poly(ethylene glycol) surfaces with and without short single-stranded DNA and above negatively charged bovine albumin serum-streptavidin multilayers. Confocal microscopy revealed the evolution of crystals several micrometers above all three surfaces. Interestingly, the "flying height" of crystals was found to depend on the surface coating. All crystalline structures remained remarkably stable over weeks, even under high salt conditions. Neither lifting the crystals nor lowering them by means of buoyancy forces destroyed them.     

New types of self-organizing interfacial alginate membranes

In this publication we describe a new self-association process, which leads to the formation of ultra-thin alginate layers at the interface between oil and water. The water phase contains a highly dilute solution of sodium alginate. These macromolecules are negatively charged and they are not surface active. The oil phase contains a small concentration of positively charged surfactants. At the interface between oil and water, the cationic surfactants tend to form complexes with the negatively charged alginate polyelectrolytes in the aqueous solutions. This leads to striking adsorption processes of the solved polysaccharide molecules at the oil-water interface. Upon the addition of calcium ions, a cross-linking process sets in and one obtains the thin viscoelastic membranes, which are anchored at the interface between oil and water. The thickness of these membranes is of the order of 0.2 mm. Similar structures can also be formed by solving positively charged Gemini surfactants in the oil phase. In this case, the cationic surfactant molecules induce the adsorption processes of alginate macromolecules, and they also act as cross-linking compounds. In a series of experiments, we measured the surface rheological properties of these ultra-thin alginate membranes. The results of these investigations point to the presence of electrostatically stabilized membranes. Special interest was given to the influence of the guluronate content of the alginates, which is important for the cross-linking mechanism according to the egg-box model. Finally, this article finishes with the discussion of the proposed building mechanisms of these membranes.     

Al-Mg MMH正电胶体粒子体系的流变学

研究了铝／镁混合金属氢氧化物（MMH）粒子含量,PH值,电解质等因素对MMH悬浮液流变学的影响,发现MMH粒子浓度的增加使悬浮体从牛顿型流体变为带有屈服值的假塑性流体;在相对很低的粒子浓度（2％）时,通过改变粒子表面化学状态和粒子周围的介质环境可以改变悬浮体的流动形态;MMH悬浮体触变性结构与高PH值时合成锂皂石悬浮体的结构极为相似,是粒子间的静电排斥作用所致。     

In situ characterization of functional purple membrane monolayers at the air-water interface

The purple membrane (PM) of Halobacterium salinarum contains a single type of protein, bacterio-rhodopsin (bR), which is a member of the seven alpha-helices transmembrane protein family. This protein is a photoactive proton pump, translocating one proton from the cytoplasmic to the extracellular side of the PM per photon absorbed. bR is found in trimers in PM, where they are assembled in a two-dimensional hexagonal lattice. We show herein that stable and functional films can be built in monolayers at the air-water interface by spreading aqueous suspensions of purified and native PM patches. In situ spectroscopic measurements at the air-water interface indicate that bR remains photoactive in this environment. Physical parameters of these PM films, such as protein molecular area, irreversible in-plane aggregation, z-axis orientation, film thickness, and surface roughness, were determined from surface pressure and surface potential-area isotherms, fluorescence spectroscopy, and X-ray reflectivity at the air-water interface. We find that PM do form organized monolayers of membranes, with an optimal packing density at a surface pressure of approximately 20 mN/m, although no preferential vectorial alignment, with respect to the plane normal to the membrane, can be detected from fluorescence quenching experiments.     

Interaction of the antimicrobial peptide dicynthaurin with membrane phospholipids at the air-liquid interface

This paper reports the first study on the interaction of the antimicrobial peptide dicynthaurin with 1,2-dipalmitoyl-glycerophosphatidyl-glycerol investigated in monolayers at the air-liquid interface. The influence of the peptide on the two-dimensional phase behavior of the negatively charged lipid was elucidated by means of pressure-area isotherm measurements, fluorescence microscopy, and grazing incidence X-ray diffraction measurements. The pure peptide forms a stable monolayer at the air-liquid interface up to 30 mN/m as shown for both the monomeric and the dimeric cynthaurins. The peptide lipid interaction was monitored in isotherm measurements showing a strong adsorption of the peptide and stabilization at the interface promoted by the lipid monolayer. The X-ray diffraction measurements in agreement with fluorescence microscopy studies showed that the peptide destabilizes the condensed chain lattice, leading to a complete fluidization of the condensed lipid phase on physiological buffer. The adsorption of the peptide to the negatively charged lipid monolayer and the fluidization of the condensed chain lattice suggest a direct link to the peptides' ability to expand the bacterial membrane that would be relevant for the in vivo mode of action.     

Solvent-free synthesis of Janus colloidal particles

Taking advantage of the quick and efficient access of vapor to surfaces, a simple, solvent-free method is demonstrated to synthesize Janus colloidal particles in large quantity and with high efficiency. First, at the liquid-liquid interface of emulsified molten wax and water, untreated silica particles adsorb and are frozen in place when the wax solidifies. The exposed surfaces of the immobilized particles are modified chemically by exposure to silane vapor and, in principle, subsequent dissolution of the wax opens up the inner particle surface for further chemical modification. Applying this scheme, this paper describes the production of amphiphilic Janus particles (hydrophobic on one side, hydrophilic on the other) and dipolar Janus particles (positively charged on one side, negatively charged on the other). Janus geometry is confirmed by fluorescence microscopy and flow cytometry. Amphiphilic Janus particles are found to adsorb strongly to the water-oil interface, whereas dipolar particles assemble into chains in the aqueous phase.     

Equation of state for monomolecular films of melittin at air-water interface

The spread monolayers of proteins at the air-water interface have been reported to be very useful model membrane systems. The charged protein monolayers have been analyzed by using the Gouy-Chapman (-Stern) models. These models gave satisfactory analyses of “non-membrane” proteins, but could not be used for the data of charged melittin monolayers (“membrane protein”). In order to describe these data, a new discrete (net) charge model is developed, and the equation of state for these two-dimensional films is discussed herein. This study shows, for the first time, that discrete (net) charges are present in charged melittin (a peptide with 26 amino acids) monolyers. The measured surface pressure,Π, and surface potential,Δψ, are analyzed with the help of the discrete charge model.