Time-Resolved Terahertz Spectroscopy with Free-Space Electro-Optic Sampling

We present a time-resolved ultrafast measurement in terahertz (THz) frequency region by means of the free-space electro-optic sampling. The fast delay scan technique is used to suppress the noise with low frequency and to improve the signal-to-noise ratio of the system. The transmission spectra of different materials are obtained.The optical properties of these materials in a THz region are shown. The broadening of spectrum and chirping phenomena are illustrated. We find that polystyrene is an excellent material for the THz application.     

Two-dimensional ring-type photonic crystals in the near-infrared region

We propose a ring photonic crystal working in the near infrared region, where the air holes in the background material GaAs are arranged to form a series of rings. We find that the band gaps do not depend on the incident direction, and only a small number of rows are needed to create a frequency gap in the transmission spectrum. The transmission spectra of both P and S polarizations show that there is a complete bandgap in the hexagonal ring photonic crystals and the ratio of gap width to mid-gap frequency is as high as 11%.     

Dynamical properties of two-band superlattices with strong interband coupling in real space under the action of ac and dc－ac fields

Within a two-band tight-binding model driven by ac and dc－ac electric fields, using numerical methods, we investigate the dynamics of electrons and the quasi-energy spectrum of the system with strong interband coupling in real space. We find that when the bandwidth is suppressed to a value much smaller than the field frequency, the dynamical localization can exist in the system. The corresponding regions are found for the occurrence of dynamical localization in the parameter space.     

Coupling interaction between a single emitter and the propagating surface plasmon polaritons in a graphene microribbon waveguide

The coupling interaction between an individual optical emitter and the propagating surface plasmon polaritons in a graphene microribbon （GMR） waveguide is investigated by numerical calculations, where the emitter is situated above the GMR or in the same plane of the GMR, The results reveal a multimode coupling mechanism for the strong interaction between the emitter and the propagating plasmonic waves in graphene. When the emitter is situated in the same plane of the GMR, the decay rate from the emitter to the surface plasmon polaritons increases more than 10 times compared with that in the case with the emitter above the GMR.     

Ultrasonic backward radiation profile on painted rough interface

Generalized Lamb surface waves are generated in a surface region when ultrasonic waves are incident to the layered substrates such as painted specimen in liquid. Then, backward radiated waves are returned to the direction of incidence by scattering and energy radiation of the surface waves. Hence, the backward radiation could be used in assessing the interracial state between layer and substrate because the surface wave is sensitive to the change of physical properties in a surface region. Painting surface treatment of commercial products and articles occasionally hide the surface region trouble such as roughness and crack. The evaluation of interfacial state under painting layer is very important in the prevention of great accidence, hence the evaluation technique should be nondestructive, fast and easy applicable to the fields. The backward radiations were measured for the painted glass with periodic interfacial roughness immersed in water tank. The effect of interfacial roughness on the angular pattern and frequency spectrum of the ultrasonic backward radiation was investigated to develop the nondestructive technique for interfacial roughness evaluation.     

Observation of E×B Flow Velocity Profile Change Using Doppler Reflectometry in HL-2A

A broadband, O-mode sweeping Doppler reflectometry designed for measuring plasma E×B flow velocity profiles is operated in HL-2A. The main feature of the Doppler reflectometry is its capability to be tuned to any selected frequency in total waveband from 26-40 GHz. This property enables us to probe several plasma layers within a short time interval during a discharge, permitting the characterization of the radial distribution of plasma fluctuations. The system allows us to extract important information about the velocity change layer, namely its spatial localization. In purely Ohmic discharge a change of the E×B flow velocity profiles has been observed in the region for 28 〈 r 〈 30cm if only the line average density exceeds 2.2×10^19 m^-3. The density gradient change is measured in the same region, too.     

Aspects of the upstream region in a plasma jet with dielectric barrier discharge configurations

A plasma column with a length of about 65 cm is generated in the upstream region of a plasma jet using dielectric barrier discharge configurations. The effects of experimental parameters such as the amplitude of the applied voltage and the driving frequency are investigated in aspects of the plasma column by the optical method. Results show that both the plasma length and the propagating velocity, as well as the discharge current, increase with the increase in the applied voltage or its frequency. The discharge mechanism is analysed qualitatively based on streamer theory, where photo-ionization is important. Furthermore, optical emission spectroscopy is used to investigate the electric field intensity of the upstream region.     

Aspects of the dielectric upstream region barrier discharge in a plasma jet with configurations

A plasma column with a length of about 65 cm is generated in the upstream region of a plasma jet using dielectric barrier discharge configurations. The effects of experimental parameters such as the amplitude of the applied voltage and the driving frequency are investigated in aspects of the plasma column by the optical method. Results show that both the plasma length and the propagating velocity, as well as the discharge current, increase with the increase in the applied voltage or its frequency. The discharge mechanism is analysed qualitatively based on streamer theory, where photo-ionization is important. Furthermore, optical emission spectroscopy is used to investigate the electric field intensity of the upstream region.     

Phase Transition in Acoustic Localization in a Soft Medium Permeated with Air Bubbles

Propagation of an acoustic wave in a soft medium permeated with air bubbles is theoretically investigated by using a self-consistent approach. The soft medium is assumed to be viscoelastic to estimate the effect of acoustic absorption on the acoustic localization in such a medium. The oscillation phases of bubbles are examined by employing a phase diagram method. A collective oscillation of the bubbles is observed once the acoustic localization occurs, which is known as a phenomenon of ＇phase transition ＇, and such a phenomenon persists as we manually increase the viscosity factor of the soft medium. Therefore it is proven that the phenomenon of phase transition may serve as a unique criterion to effectively identify acoustic localization in a bubbly soft medium even in the presence of viscosity, and the directions of the phase vectors help to determine the extent of localization. This is of practical significance for experimental research studying the acoustic localization in such a medium, for which the presence of viscosity generally causes great ambiguity in distinguishing the effects of localization and acoustic absorption.     

Resonant Absorption Mechanical Spectrometer and Its Applications in Solids

An improved apparatus is developed from Ke-pendulum. This new apparatus, resonant absorption mechanical spectrometer (RAMS), can measure the internal friction of solids under a forced vibration mode and the measuring frequency can change quasi-continually from a frequency that is much lower than the resonant frequency of the pendulum system, fτ, to the one that is much higher than fτ. The internal friction measurement is able to cover the frequency range from 10^-3 Hz to kHz. The measurement method and the calculation formula of the internal friction measured by a RAMS in the full frequency range are derived. A series of resonant absorption peaks are observed in copper, alumiaium, zinc, iron samples by the RAMS. The resonant absorption characteristics of the copper sample are studied in details. The experimental results indicate that the position (frequency) of the resonant absorption peaks are independent of the resonant frequency of the pendulum system. The reality of resonant absorption mechanical spectra is discussed and an inference based on the experimental results is presented such that the RAMS is able to characterize some feature of solid materials.     

Comprehensive studies on dielectric properties of p-methoxy benzylidene p-decyl aniline with function of temperature and frequency in planar geometry: A potential nematic liquid crystal for display devices

The dielectric properties of the nematic mesophase, p-methoxy benzylidene p-decyl aniline(MBDA), measured in planar geometry with a function of frequency and temperature are investigated in detail. The complex dielectric permittivity(ε' and ε') is also studied at a bias voltage of 10 V for planar aligned sample cell of nematic mesophase. The dielectric permittivity with bias voltage attains a higher( 2 times) value than that without bias voltage at a temperature of 56℃,which is due to the fact that the linking group of nematic molecules is internally interacted with an applied bias voltage.This is supported by observing an enhanced dielectric permittivity of nematic liquid crystal(LC) in the presence of bias voltage, which can be fully explained as the increasing of the corresponding dipole moment. The dielectric relaxation behaviors of nematic LC are also demonstrated for planar aligned sample cell. The remarkable results are observed that the relaxation frequency shifts into low frequency region with the increase of the bias voltage applied to the planar aligned sample cells. The dielectric relaxation spectra are fitted by Cole–Cole nonlinear curve fitting for nematic mesophase in order to determine the dielectric strength.     

Nonsingularity in two-dimensional cylindrical invisible cloaks

The method of designing electromagnetic invisible cloaks is usually based on the form-invariance of Maxwell's equations in coordinate transformation. The exterior boundary of a cylindrical invisible cloak is unchanged and the interior boundary is extended from that of a point to that of a cylindrical region in coordination transformation. This transformation process makes perfect cloaks, but it causes singularity in the constitutive material parameters of cloaks. This singularity makes the cloaks impossible to realize in practice. In order to remove this singularity, this paper sets a small cylindrical region replacing a point in the space transformation. The cylindrical region is so small that it does not affect the invisibility effects, but it can remove the singularity for material parameters. Full wave simulations based on the finite element method were used to verify the designed cloaks.     

Analysis of the Interaction between Low-Frequency Waves and Ions in the High-Altitude Cusp Region Observed by Satellite Cluster

The energy transfer between ions （protons） and low frequency waves （LFWs） in the frequency range f1 from 0.3 to 10 Hz is observed by Cluster crossing the high-altitude polar cusp. The energy transfer between low frequency waves and ions has two means. One is that the energy is transferred from low frequency waves to ions and ions energy increases, The other is that the energy is transferred from ions to low frequency waves and the ion energy decreases. lon gyratory motion plays an important role in the energy transfer processes. The electromagnetic field of f1 LFWs can accelerate or decelerate protons along the direction of ambient magnetic field and warm or refrigerate protons in the parallel and perpendicular directions of ambient magnetic field, The peak values of proton number densities have the corresponding peak values of electromagnetic energy of low-frequency waves. This implies that the kinetic Alfven waves and solitary kinetic Alfven waves possibly exist in the high-altitude cusp region.     

Practical absorption limits of MPP absorber

The construction and properties of microperforated panel (MPP) absorber are discussed. The absorption limit of the absorber had been shown that low values of the perforate constant k = d(f/10)1/2 and the orifice diameter d (in mm) are essential for MPP to have high absorption in wide frequency band. To find the exact limits, take 1 for k as a start, because both specific resistance and high absorption require k around one. And the orifice diameter d is chosen as 0.1 mm, so that the peak absorption coefficient (resonance absorption) is at 1000 Hz, and high sound frequency may be in the absorption region. Is it possible for a single layer of such an MPP to cover the whole absorption region required in practice? The half-absorption limit is not a good criterion, because low absorption comes in also in some cases. The 0.5 absorption coefficient limit is suggested for practical region, as a standard for comparison. Absorption curves were drawn for different load resistances, of absorption coefficients versus frequency. Ordinary MPP absorber absorbs in slightly over two octaves, and the new absorber with r = 1 (specific resistance equal to the characteristic impedance in air)is slightly better than these, 2.5 octaves. The new absorbers with r > 1, are much better than these, and some satisfies high absorption in broad frequency range. Realization of these will mean great progress of MPP absorbers.     

Localization and delocalization of a one-dimensional system coupled with the environment

We investigate several models of a one-dimensional chain coupling with surrounding atoms to elucidate disorder-induced delocalization in quantum wires, a peculiar behaviour against common wisdom. We show that the localization length is enhanced by disorder of side sites in the case of strong disorder, but in the case of weak disorder there is a plateau in this dependence. The above behaviour is the conjunct influence of the coupling to the surrounding atoms and the antiresonant effect. We also discuss different effects and their physical origin of different types of disorder in such systems. The numerical results show that coupling with the surrounding atoms can induce either the localization or delocalization effect depending on the values of parameters.     

Squeezing Effect of a Nanomechanical Resonator Coupled to a Two-Level System: an Equilibrium Approach

The squeezing effect of a nanomechanical resonator coupled to a two-level system is studied by variational calculations based on both the displaced-squeezed-state （DSS） and the displaced-oscillator-state （DOS）. The stable region of the DSS ground state at both T = 0 and T ≠ 0 and the corresponding squeezing factor are calculated. It is found that when the resonator frequency lies in （kBT,△）, where A is the tunnelling splitting of the two-level-system in the presence of dissipation, tunnelling splitting of a DSS ground state decreases with the temperature, while tunnelling splittihg of a DOS ground state increases with the temperature in low temperature region. This opposite temperature dependence can help to distinguish between the DSS and DOS ground state in the experiment.     

Analysis of localization effect in blue-violet light emitting InGaN/GaN multiple quantum wells with different well widths

Four blue-violet light emitting InGaN/GaN multiple quantum well(MQW) structures with different well widths are grown by metal–organic chemical vapor deposition. The carrier localization effect in these samples is investigated mainly by temperature-dependent photoluminescence measurements. It is found that the localization effect is enhanced as the well width increases from 1.8 nm to 3.6 nm in our experiments. The temperature induced PL peak blueshift and linewidth variation increase with increasing well width, implying that a greater amplitude of potential fluctuation as well as more localization states exist in wider wells. In addition, it is noted that the broadening of the PL spectra always occurs mainly on the low-energy side of the PL spectra due to the temperature-induced band-gap shrinkage, while in the case of the widest well, a large extension of the spectral curve also occurs in the high energy sides due to the existence of more shallow localized centers.     

Frequency Resonance in Stochastic Systems

The phenomenon of frequency resonance,which is usually related to deterministic systems.is investigated in stochastic systems.We show that for those autonomous systems driven only by white noise,if the output power spectrum exhibits a nonzero peak frequency,then applying a periodic signal just on this noise-induced central frequency can also induce a resonance phenomenon,which we call the frequency stochastic resonance.The effect of such a resonance in a coupled stochastic system is shown to be much better than that in a single-oscillator system.     

The focus steering for high intensity focused ultrasound phased array based on real-time phase shift calculation

When time reversal technique is used in phased array high intensity focused ultrasound system to obtain self-adaptive focusing,it is needed to calculate the initial phases of the elements.Because of the frequency oscillation when the phase lock loop is initiated,different results are got in different segments using conventional methods.A method of calculating the phase difference was presented,that can display the changes of phase difference in real-time, and the steady phase differences can be regarded as the initial phases of the elements.The experimental results show that using the phase difference obtained by this method can get a better distribution of sound field in a certain spatial region.     

Recent improvements on the atomic fountain clock at SIOM

We report the recent advance in our rubidium atomic fountain clock(AFC). The parameters of the Ramsey cavity are optimized by balancing the coupling from the two ports. The temperature control system of the Ramsey interaction region is renovated, and the resonant temperature of the Ramsey cavity is regulated to be slightly above the room temperature.The quality of magnetic environment in the Ramsey interaction region is also improved. A new digital-to-analog converter(DAC) circuit that controls the local oscillator is adopted to decrease the noise of the oven-controlled crystal oscillator output. As a result, the short-term fractional frequency stability of 2.7 × 10-13-1/2τand the long-term fractional frequency stability of 1.6 × 10-15 at the average time of 32800 s are achieved.