Injection-Seeded 500 Hz Repetition Rate High Peak Power Single-Frequency Nd:YAG Laser for Mid-Infrared Generation

We develop an injection-seeded single-frequency neodymium-doped yttrium aluminum garnet (Nd:YAG) laser with 500 Hz repetition rate and high peak power. The laser construction is designed as seed injection and master oscillator power amplifier (MOPA) including single-frequency master oscillator, extra-cavity frequency doubling crystal, and round-trip power amplifier. The master oscillator can emit 1,064 nm laser of 8.4 mJ with 6.8 ns pulse width at the pump energy equal to 23 mJ. A green laser energy of 1.1 mJ is obtained by setting the proper temperature of the LBO crystal. The pulse energy of 1,064 nm laser decreases to 6.5 mJ after passing through the LBO crystal and rises to 25.3 mJ after a round-trip power amplifier corresponding to the extraction efficiency of 29%. The final output pulse width is 6.5 ns, representing a peak power of 3.9 MW. The 1,064 nm laser beam quality factor M² of the master oscillator and the amplified one are 1.3 and 1.5, respectively. The laser will be used to generate mid-infrared where the 532 nm laser with narrow pulse width is to pump sheet optical parametric oscillator (OPO) and the 1,064 nm laser with high peak power to pump the OPO.     

High-power continuous-wave output of master oscillator power amplifier system at 1053 and 1083 nm

We report the efficient generation of high-power laser radiation at 1053 and 1083 nm wavelength by using of a hybrid master oscillator fiber power amplifier system, consisting of a diode-pumped Yb-doped oxyorthosilicate solid state laser as the master oscillator and an Yb-doped large-mode-area fiber as the power amplifier. Efficient tunable diode-pumped Yb-doped oxyorthosilicate lasers at 1053 and 1083 nm have been constructed, which was scaled up to a maximum output power of 34.5 W at 1053 nm and 30.2 W at 1083 nm by a fiber power amplifier, corresponding to a slope efficiency of 93.9 and 87.8%, respectively.     

光纤激光泵浦MgO:PPLN高功率中波红外光参量振荡器

为实现高效率、高功率中波红外激光输出,研制基于MgO:PPLN晶体的中波红外光参量振荡器（OPO）,泵浦源为基于主振荡功率放大（MOPA）结构的线偏振掺Yb光纤激光器（YDFL）。实验结果表明:YDFL可实现最高79.1 W的1064.1 nm脉冲线偏振激光输出;在YDFL泵浦下,通过优化输出镜曲率半径和泵浦光束腰直径,该OPO实现最高9.15 W的3.754 μm脉冲激光输出,光光转换效率为11.57%,重复频率为300 kHz,脉冲宽度约为110 ns。     

All-fiberized Tm-doped fiber MOPA with 30-W output power

We demonstrate a 30-W all-fiberized laser in a master oscillator power amplifier(MOPA) structure with a central wavelength of 1 950 nm.The laser is a continuous-wave(CW) operation with double-clad Tm-doped silica fiber pumped by pigtailed laser diodes with a central wavelength of 793 nm.The optical-to-optical efficiency of the MOPA system is 37.5% with respect to the total 80-W pump power.The maximal slope efficiency of the system is approximately 43%,which belongs to the main amplifier and exceeds the Stoke limit.No obvious amplified spontaneous emitting(ASE) is observed in the experiment,and the power can be scaled straightforwardly by improving the pump power.     

A kilowatt level diode-side-pumped QCW Nd:YAG ceramic laser

We demonstrate a kilowatt level Quasi-continuous-wave (QCW) diode-side-pumped Nd:YAG ceramic laser at 1064 nm. The laser system adopts a master oscillator power amplifier scheme (MOPA). The master oscillator contains two diode-pumped laser modules. Under the pump power of 2000 W, an output power of 686 W was obtained. After amplified by an identical ceramic laser module, a maximum output power of 1020 W was obtained under a total incident pump power of 3433 W, corresponding to an optical-optical conversion efficiency of 29.7%. At the maximal output power, the repetition frequency was measured to be 1 kHz and the pulse width was 114 μs. To the best of our knowledge, this is the first time to realize QCW side-pumped Nd:YAG ceramic laser system with output power above 1 kW.     

175-W continuous-wave master oscillator power amplifier structure ytterbium-doped all-fiber laser

We report on hundred watts range ytterbium-doped all-fiber laser assembly based on the master oscillator power amplifier structure. It consisted of an oscillator and an amplifier with all-fiber components. And fiber fusion splice made the laser be an integrated fiber system. It generated up to 175.5 W of continuouswave (CW) output power at 1085 nm with more than 75% extraction efficiency in the amplifier when the total coupled pump power into the double clad fiber was 270 W.     

Optimization of erbium-doped fiber MOPA laser

An erbium-doped fiber laser (EDFL) constructed in a master oscillator and power amplifier (MOPA) configuration is analyzed. The pump powers for the fiber cavity laser and the booster amplifier stages are managed properly to achieve maximal pump conversion efficiency. Our design achieves a pump conversion efficiency of 91.4%, corresponding to a quantum efficiency of 96.6%, for a 1565.8 nm MOPA laser pumped by a total power of 300 mW at 1480 nm. The optimized MOPA laser shows a 25% enhancement in the pump conversion efficiency, compared to a non-MOPA fiber laser. A side lobe suppression ratio of 48 dB for the optimized MOPA laser is observed.     

100 W全光纤声光调Q光纤激光器实验研究

 报道了一台全光纤结构主振荡功率放大(MOPA)型掺镱脉冲光纤激光器,以光纤光栅为腔镜,光纤型声光调Q的光纤激光器为种子源,通过两级掺镱双包层光纤放大器实现功率放大。对声光调Q的光纤激光器输出特性进行了研究,比较了不同泵浦波长、不同重复频率对激光输出功率和脉冲宽度的影响,并实现了最短脉冲宽度25 ns、单脉冲能量45 μJ的脉冲激光输出。在重复频率50 kHz时,对脉冲宽度130 ns、平均功率0.6 W的种子光进行放大,得到了平均功率102.5 W、脉冲宽度约240 ns的激光输出。     

High-power Tm~(3+)-doped all-fiber laser operating at1908 nm by a master oscillator power amplifier configuration with narrow spectral linewidth

We demonstrate a diode-pump Tm~(3+)t-doped all-fiber laser operating at 1908 nm based on a master oscillator power amplifier(MOPA) configuration. In our work, 152 W of laser output power is generated by a total incident pump power of 434 W at 790 nm, corresponding to the total optical efficiency of 35%. The laser wavelength is1908.29 nm. To the best of our knowledge, it is the highest output power reached around 1908 nm with such a narrow linewidth of 0.18 nm based on a MOPA configuration.     

360-W average power operation with a single-stage diode-pumped Nd:YAG amplifier at a 1-kHz repetition rate

We report a high-average-power laser-diode-pumped Nd:YAG master oscillator power amplifier system that has a minimum number of elements in the single multipass zigzag-slab amplifier stage and is used to pump a high-peak-power and high-average-power Ti:sapphire laser system. This phase-conjugated system produces an average power of 362 W at 1 kHz in a 30-ns pulse with an optical-to-optical conversion efficiency of 14%. With an external KTP doubler this system generates 132 W of green average output power at 1 kHz with a conversion efficiency of 60% when pumped at a power level of 222 W. To the best of our knowledge these results represent the highest average output power at both infrared and green wavelengths achieved in a single amplifier stage.     

Generation of high energy and good beam quality pulses with a master oscillator power amplifier

A high efficiency and high peak power laser system with short-pulse and good beam quality has been demonstrated by using a master oscillator power amplifier with two-pass amplification configuration. The master oscillator, end-pumped with a fiber-coupled laser diode array, provides low power but excellent beam quality pulses, and the amplifier boosts the pulse energy by orders without significant beam quality degradation. Short pulses of 8.5 ns with energy up to 130 mJ and approximately diffraction limited beam quality have been demonstrated.     

26W near diffraction limited Q-switched green laser based on a diode-end-pumped master oscillator power amplifier

An efficient acousto-optically Q-switched extracavity frequency-doubled 532nm laser based on a diode-end-pumped master oscillator power amplifier (MOPA) is demonstrated. With a type I non-critically phase-matched LBO, 26W of average power at 532nm in a near diffraction limited mode at a repetition rate of 30kHz was generated under 43W pump power of 1064nm Nd:YVO_{4} laser, which correspond to a frequency-doubling conversion efficiency of 60%.     

脉冲单频Nd:YVO4激光器及其倍频输出特性研究

为了研制激光干涉成像所需的主振荡功率放大(MOPA)结构脉冲单频激光器,本文完成MOPA激光器的种子源即声光调Q脉冲单频1 064 nm激光器的特性研究,同时完成种子源腔外倍频绿光特性研究。脉冲单频激光器采用声光调Q模块实现脉宽约20 ns的1 064 nm脉冲激光输出,采用环形腔设计并采用一组不同厚度的标准具实现单纵模运转。实验研究基频1 064nm和倍频532 nm激光脉冲的线宽,得出在全脉宽范围内都具有较高时间相干性的结论。实验分别获得脉宽约28 ns峰值功率约6.5 kW的1 064 nm脉冲单频激光和脉宽约20 ns、峰值功率约0.5 kW的532 nm脉冲单频激光,腔外倍频效率为5.6%。实验同时也验证了腔外倍频的激光脉宽压缩效应。     

国产全光纤结构激光器实现245 W高功率激光输出

 以国产掺镱光纤为增益介质,利用国产泵浦源和光纤器件,构建了主振荡功率放大（MOPA）结构的全国产大功率全光纤激光器。激光器包括10 W种子激光器和高功率放大器两部分。在注入最大泵浦功率为356 W时,获得了245 W波长1 080 nm激光的稳定输出,光-光效率为69%。激光器单次连续出光时间约30 min,功率稳定性在1%以内。目前激光器输出功率受限于泵浦功率,增加泵浦源的数目有望进一步提高输出功率。     

Design of the Seed Source for High Power KrF Excimer Laser System

１ＩｎｔｒｏｄｕｃｔｉｏｎＥｘｃｉｍｅｒｌａｓｅｒｓａｒｅｔｈｅｐｕｌｓｅｄｇａｓｌａｓｅｒｗｈｉｃｈｏｐｅｒａｔｅａｔａｎｕｍｂｅｒｏｆｆｉｘｅｄｗａｖｅｌｅｎｇｔｈｓｉｎｔｈｅｒｅｇｉｏｎｏｆｕｌｔｒａｖｉｏｌｅｔ．Ｈｏｗｅｖｅｒ,ｉｔｓｐｕｌｓ...     

52 mJ narrow-bandwidth degenerated optical parametric system with a large-aperture periodically poled MgO:LiNbO3 device

We have demonstrated efficient, high-energy, narrow-spectral-bandwidth 2.128 microm pulse generation by use of periodically poled MgO:LiNbO3 devices with a 36 mm length and a 5 mm x 5 mm large aperture. A free-running degenerated optical parametric oscillator (OPO) pumped with a Q-switched 1.064 microm Nd:YAG laser exhibits a high slope efficiency of 75% and an optical-to-optical conversion efficiency of 70% with a broad spectral bandwidth (>100 nm). In a configuration with a spectrally narrowed master oscillator followed by a power amplifier, we have achieved an output pulse energy of 52 mJ with a spectral bandwidth of less than 2 nm at the degeneracy point. The total optical-to-optical conversion efficiency of the system reached 50%.     

LD端面泵浦Nd：YLF激光放大器研究

 描述了对高功率LD端面泵浦Nd：YLF激光放大器的研究。放大器的耦合结构采用微透镜对泵浦光进行准直，透镜导管（Lensduct）对其汇聚，耦合效率达72.2%。用该放大器构成的振荡器的斜效率为35.9%。该激光放大器的口径为Φ 10mm，在1053nm处具有2.66的小信号增益。     

An Efficient Single-Frequency Yb-Doped All-Fiber MOPA Laser at 1064.3 nm

An efficient narrow-linewidth single-frequency(SF) Yb-doped all-fiber master oscillator power amplifier(MOPA)laser operating at 1064.3 nm is demonstrated experimentally.A ring cavity SF fiber laser is used as the seed source for the MOPA system and the Yb-doped fibers are employed as the gain medium or the saturable absorber.The SF operation is observed to be stable without mode hopping.The highest output power of 266 mW is obtained under the 400 mW pump power with the corresponding slope efficiency of 66.2%.The linewidth of the amplified output laser is approximately 1 kHz and its optical signal-to-noise ratio is over 45 dB.     

输出平均功率大于2W的高功率、包层抽运、超短脉冲铒镱共掺光纤激光器

采用主振荡功率放大的方式，研制成功集宽带波长连续可调谐、带宽内输出功率谱均衡、高重复频率和高功率性能于一体的超短脉冲包层抽运铒镱共掺光纤激光器.将优化主振荡器和功率放大器的腔结构与掺铒光纤的饱和增益特性结合起来，实现了1535nm—1570nm(35nm带宽)的输出功率均衡的波长连续可调谐激光输出，在带宽内激光功率的最大波动仅为0.5dBm；带宽内平均输出功率大于2W、脉冲重复频率大于10GHz、脉冲宽度小于30ps.该激光器具有综合性能指标先进、结构简单、全光纤化、使用方便等优点. 关键词： 光纤激光器 包层抽运 短脉冲 高重复频率     

分布式抽运连续光纤激光器研究

为了避免高功率光纤激光器中光纤端面出现热效应问题,依据多点级联结构的耦合器,对分布式抽运的光纤激光器进行了研究。首先,介绍了实验室自主研制的级联耦合器。然后,分析了耦合器插入对光纤激光器的影响。最后,选用自制的耦合器搭建了分布式抽运的光纤激光器。实验结果表明:对耦合器插入损耗的研究,能够促进高功率级联耦合器的实现。在光纤激光器结构中,975 nm泵浦功率注入1.1 k W时,1 080nm激光功率输出为770 W,光-光转换效率为77%。在主控振荡功率放大结构中,激光功率输出为635 W,放大级的光-光转换效率为78%。分布式抽运方式可以使泵浦光多点注入,避免了热量的集中,能够获得千瓦级的激光功率输出。