双相介质半空间内椭圆夹杂对透射SH波的散射

为探究双相介质弹性半空间内椭圆弹性夹杂对透射SH波的散射问题,主要采用Green函数法、复变函数法、保角映射法和极坐标移动技术。首先,引入复变量并在复平面上运用保角映射的方法将椭圆边界映射为单位圆边界;然后,将双相介质沿垂直边界剖开分成两个四分之一空间,在剖分面上作用附加力系使SH波在垂直边界上满足位移和应力连续的条件,并构造四分之一空间内点源荷载作用下的Green函数位移场;进而,利用"契合"的思想在垂直边界上建立定解积分方程组,并利用SH波衰减的性质进行有限项截断来求解未知附加力系。最后,通过具体算例得出在不同参数情况下椭圆夹杂周边动应力集中因子分布情况。结果得知,SH波的入射角度和频率以及介质的性质对夹杂周边动应力集中分布有一定影响。     

SH波对直角平面区域内圆形孔洞的散射与地震动

研究了以任意方向入射的平面SH波对直角平面区域内圆形孔洞的散射与地震动问题.首先,利用复变函数法、多极坐标移动技术及叠加原理,构造了一个可以预先满足直角平面区域自由表面上应力自由边界条件的圆孔对SH波散射的波函数;其次,利用镜像法,将直角平面区域内的波场镜像于半无限空间,并得到了满足边界条件的总波场;最后,作为对抗暴抗震问题的研究,通过算例考虑了圆孔的动应力集中和地表的动位移.结果表明,圆孔的动应力集中和地表的位移幅值取决于入射波频率、角度和圆孔的位置.     

SH波入射时垂直半空间中双相介质界面附近圆孔的动力分析

利用复变函数和Green函数法研究了垂直半空间中双相介质界面附近圆孔对SH波的散射与动应力集中问题。该问题的解答采用镜像法,首先构造出含有圆孔的直角平面区域出平面问题的Green函数,然后利用契合技术,并根据界面处位移连续性条件将解答归结为具有弱奇异性的第一类Fredholm积分方程组的求解,结合散射波的衰减特性,直接离散该方程组,把积分方程组转化为线性代数方程组可得到该问题的数值结果。最后,通过算例分析了圆孔的动应力集中情况。结果表明,与全空间中界面附近圆孔对SH波的散射相比,由于垂直半空间自由边界的存在,孔边动应力集中系数明显增大;另外,入射波由硬介质(波速大)进入到软介质(波速小)时,与均匀介质相比,孔边动应力集中更显著,最不利的参数组合,孔边动应力集中系数几乎提高了一倍,入射波由软介质进入到硬介质时,情况相反。     

SH波作用下界面任意形状孔洞附近的动应力集中

采用Green函数和复变函数法求解了平面SH波在界面任意形状孔洞上的散射问题.首先,取含有任意形状凹陷的弹性半空间,在其水平表面上任意一点承受时间谐和的反平面线源荷载作用时的位移场作为Green函数.然后,按契合方式构造出界面任意形状孔洞对SH波的散射模型,利用所得Green函数按界面位移连续条件建立求解问题的定解积分方程组,求解界面孔附近的动应力集中系数.最后,给出了界面上椭圆孔和方孔边缘动应力集中系数的数值结果,并讨论了不同介质参数和孔洞形状对孔附近动应力集中系数的影响.     

半空间双相压电介质垂直边界附近圆孔对SH波的散射

利用“Green函数法”和“镜像法”对垂直边界附近含圆孔的半空间双相压电介质对SH波的散射问题进行分析,得到其稳态解。利用镜像法得到满足水平边界应力自由与电位移自由的波函数解析表达式。根据垂直边界连续性条件,利用“契合法”建立第一类Fredholm型积分方程组,得到圆孔周边的动应力集中系数与电场强度集中系数解析表达式。数值算例分析了入射波频率、入射角度、介质参数等对动应力集中系数与电场强度集中系数的影响,并与已有文献进行比较。计算表明,高频SH波垂直入射危害较大。     

SH波对双相介质界面附近圆形孔洞的散射

建立了求解平面SH波对双相介质界面附近圆形孔洞散射与动应力集中的一种分析方法．利用复变函数与多极坐标的方法构造了一个Green函数，它是在含有圆形孔洞的弹性半空间的水平面上任一点上作用时间谐和的出平面线源荷载的位移解．利用“契合”模型，并根据界面上位移连续性条件，建立了求解SH波对双相介质界面附近圆形孔洞散射的具有弱奇异性的第一类Fredholm型积分方程．给出了圆孔周边上动应力集中系数的表达式．作为算例，分析了在界面一侧或界面两侧附近具有圆形孔洞时SH波的散射，并讨论了入射波波数、不同的材料组合以及孔心至界面的距离对动应力集中的影响．     

带形域内裂纹对SH波散射问题的边界元解

采用边界元法研究含裂纹的带形域各向同性弹性体，裂纹对SH波的散射问题，推导出带形域情况下不同边界条件的各种Green函数，导出了以裂纹张开位移为未知数的边界积分方程，计算出表面散射场和总位移．算例表明，利用所提供的格林函数和边界元格式解答带形域的散射问题比较方便．     

直角平面角点衬砌对稳态平面SH波的散射

利用波函数展开法求解了二维直角平面角点处圆弧形衬砌对稳态入射平面SH波的散射问题,得到问题的解析解．方法是首先构造出衬砌介质内外的总波场,它们能够预先满足直角平面两直角边界应力自由条件；再利用衬砌边界处的应力和位移连续条件写出确定散射波解中未知系数的方程组并求解．通过算例具体讨论了衬砌内边界处的环向应力集中系数和位移幅度比随无量纲波数、入射角的变化情况,结果表明它们存在不同程度的放大现象．     

SH波入射半空间双相介质界面附近圆形衬砌的动力分析

利用复变函数和Green函数法研究了无限半空间中双相介质界面附近圆形衬砌对SH波的散射与动应力集中问题。该问题的解答采用镜像法,首先构造出含有圆形衬砌的直角平面区域出平面问题的Green函数,然后利用“契合”技术,并根据界面处位移连续性条件将解答归结为具有弱奇异性的第一类Fredholm积分方程组的求解,结合散射波的衰减特性,直接离散该方程组,把积分方程组转化为线性代数方程组可得到该问题的数值结果。最后,通过算例分析了不同介质参数、几何参数和入射波时圆形衬砌界面的动应力集中情况。     

SH波对浅埋裂纹的半圆形凹陷地形的散射

采用Green函数方法，研究浅埋裂纹和含有圆形凹陷的弹性半空间对入射SH波的散射。首先取含有半圆形凹陷的弹性半空间，任意一点承受时间谐和的出平面线源荷载作用时的位移函数基本解作为Green函数；然后求解含半圆形凹陷的弹性半空间对SH波的散射问题；最后在裂纹实际存在位置利用Green函数实施裂纹的人工切割以恢复存在的裂纹，给出浅埋裂纹的半圆形凹陷弹性空间内的位移函数，进而求解裂纹存在对地表位移的影响。     

Applications of the method of complex functions to dynamic stress concentrations

The complex function method used in the solution of static stress concentration around an irregularly shaped cavity in an infinite elastic plane is generalized to the case of dynamic loading. This paper presents the solutions of two dimensional elastic wave equations in terms of complex wave functions, and general expressions for boundary conditions for steady state incident waves. Dynamic stresses around a cavity of arbitrary shape are then expressed in series of complex ‘domain functions’, the coefficient of the series can be determined by truncating a set of infinite algebraic equations. Results of dynamic stress concentration factors for circular and elliptical cavities are given in this paper.     

弹性波绕任意形状界面孔的散射

求解了弹性波绕任意形状界面孔的散射问题．通过入射波、反射波或折射波及孔的散射波场的叠加,得到了界面孔在SH波绕射下的总波场．总波场波函数的级数项待定系数可采用边界配点法来确定,该法不受边界正交性的限制,能够适用于任意形状的边界．最后,对界面椭圆孔进行了实例计算,得到了椭圆孔边的动应力集中系数．     

On the stress distribution in a prestretched simply supported strip containing two neighboring circular holes under forced vibration

The three-dimensional linearized theory of elastic waves in initially stressed bodies under plane strain is used to study the influence of the initial stretching of a simply supported plate strip with two neighboring circular holes on the stress concentration around the holes caused by additional uniformly distributed dynamic (time-harmonic) normal forces acting on the upper face. The corresponding problem is formulated and solved by the finite-element method. Numerical results on the stress concentration around the holes and the influence of the initial stretching on this concentration are presented Published in Prikladnaya Mekhanika, Vol. 43, No. 10, pp. 135–140, October 2007.     

SH波在压电材料条中垂直界面裂纹处的散射

研究了SH波在压电材料条中裂纹处的散射.压电材料条两侧涂有相同梯度参数的两个半无限大功能梯度材料,裂纹垂直于界面.通过Fourier变换,利用边界条件把问题转化为柯西核奇异积分方程,然后利用Chebyshev多项式对奇异积分方程进行数值求解.通过数值计算,分析讨论了压电条的几何参数和SH波频率对标准动应力强度因子的影响.     

Dynamic stress of a circular cavity buried in a semi-infinite functionally graded piezoelectric material subjected to shear waves

The paper presents a theoretical method to investigate the multiple scattering of shear waves and dynamic stress around a circular cavity in a semi-infinite functionally graded piezoelectric material. The analytical solutions of wave fields are expressed by employing wave function expansion method and the expanded mode coefficients are determined by satisfying the boundary conditions of the cavity. Image method is used to satisfy the free boundary condition of the semi-infinite structure. According to the analytical expression of this problem, the numerical solutions of the dynamic stress concentration factor around the cavity are presented. The effects of the piezoelectric property, the buried depth of the cavity, the incident wave number and the nonhomogeneous parameter of materials on the dynamic stress around the cavity are analyzed. Analyses show that the piezoelectric property has great effect on the dynamic stress in the region of intermediate frequency and the effect increases with increasing wave number. When the nonhomogeneous parameter of materials is less than zero, it has less influence on the maximum dynamic stress around the cavity; however, it has greater influence on the distribution of the dynamic stress around the cavity. When the nonhomogeneous parameter of materials is greater than zero, it has greater influence on both the maximum dynamic stress and the distribution of dynamic stress around the cavity, especially in the case that the buried depth is comparatively small.     

Relection of elastic waves at the elastically supported boundary of a couple stress elastic half-space

The relection elastic waves at the elastically supported boundary of a couple stress elastic half-space are studied in this paper. Different from the classical elastic solid, there are three kinds of elastic waves in the couple stress elastic solid, and two of them are dispersive. The boundary conditions of a couple stress elastic half-space include the couple stress vector and the rotation vector which disappear in the classical elastic solids. These boundary conditions are used to obtain a linear algebraic equation set, from which the amplitude ratios of relection waves to the incident wave can be determined. Then, the relection coeficients in terms of energy lux ratios are calculated numerically, and the normal energy lux conservation is used to validate the numerical results. Based on these numerical results,the inluences of the boundary parameters, which relect the mechanical behavior of elastic support, on the relection energy partition are discussed. Both the incident longitudinal wave(the P wave) and incident transverse wave(the SV wave) are considered.     

The scattering of harmonic elastic anti-plane shear waves by a finite crack in infinitely long strip using the non-local theory

In this paper, the scattering of harmonic anti-plane shear waves by a finite crack in infinitely long strip is studied using the non-local theory. The Fourier transform is applied and a mixed boundary value problem is formulated. Then a set of dual integral equations is solved using the Schmidt method instead of the first or the second integral equation method. A one-dimensional non-local kernel is used instead of a two-dimensional one for the anti-plane dynamic problem to obtain the stress occurring at the crack tips. Contraty to the classical elasticity solution, it is found that no stress singularity is present at the crack tip. The non-local dynamic elastic solutions yield a finite hoop stress at the crack tip, thus allowing for a fracture criterion based on the maximum dynamic stress hypothesis. The finite hoop stress at the crack tip depends on the crack length, the width of the strip and the lattice parameter. Supported by the Post Doctoral Science Foundation of Heilongjiang Province, the Natural Science Foundation of Heilongjiang Province and the National Foundation for Excellent Young Investigators.     

楔形空间中任意形状孔洞对平面SH波的散射：IBEM求解

采用间接边界元法(IBEM),求解了楔形空间中任意形状孔洞对平面SH波的散射问题。基于单层位势理论,首先在孔洞表面及其附近楔形空间表面上施加虚拟均布荷载,以构造散射波场。进而由自由表面零应力条件,建立方程求解得到虚拟荷载密度。总波场由楔形空间自由波场和散射波场叠加得到。研究表明：IBEM方法能够精确高效求解楔形空间中弹性波散射问题。楔形空间孔洞对波的散射特征依赖于波入射角、无量纲入射波频率、楔形夹角、孔洞位置及其形状;孔洞周围波的相干效应十分显著,空间表面位移幅值及孔边动应力集中因子比半空间情况放大一倍有余,分别达到8.5和10.0;该研究为楔形空间中更为复杂的P、SV波散射问题求解奠定了基础。     

Multiple scattering of electro-elastic waves from a buried cavity in a functionally graded piezoelectric material layer

This paper presents a theoretical method to investigate the multiple scattering of electro-elastic waves and the dynamic stress around a buried cavity in a functionally graded piezoelectric material layer bonded to a homogeneous piezoelectric material. The analytical solutions of wave fields are expressed by employing wave function expansion method, and the expanded mode coefficients are determined by satisfying the boundary conditions around the cavity. The image method is used to satisfy the mechanical and electrically short conditions at the free surface of the structure. According to the analytical expression of this problem, the numerical solutions of the dynamic stress concentration factor around the cavity are presented. The effects of the piezoelectric property, the position of the cavity in the layer, the incident wave number and the material properties on the dynamic stress around the cavity are analyzed. Analyses show that the piezoelectric property has great effect on the dynamic stress in the region of higher frequencies, and the effect increases with the decrease of the thickness of FGPM layer. If the material properties of the homogeneous piezoelectric material are greater than those at the surface of the structure, the dynamic stress resulting from the piezoelectric property is greater. The effect material properties at the two boundaries of FGPM layer on the distribution of dynamic stress around the cavity is also examined.