一种投影浸入边界法的快速直接求解方法

根据投影浸入边界法分步投影求解的特点,同时针对压力泊松方程离散后的大型稀疏线性方程组是非奇异非对称的特点,结合开源函数库UMFPACK,在传递线性方程组的系数矩阵和右端向量时,采用函数库Eigen将系数矩阵的数据结构改写优化,大大降低了存储空间,实现对高维大型稀疏线性方程组的快速求解,同时求解保持良好的稳定性。本文首先利用一具有解析解的数值算例验证了求解泊松方程数值方法的准确性和网格依赖性,进而利用VC++编写投影浸入边界法的数值计算程序,以单圆柱绕流为基准数值算例,通过与其他文献和实验结果的对比,验证了投影浸入边界法数值计算结果的可靠性,并进一步分析了不同雷诺数下圆柱绕流的流场结构特征和尾涡结构的动态演化过程。     

侧柱与串列双柱绕流之间的干扰

本文给出了关于串列双柱与创柱间流动干扰的实验研究结果。当三个圆柱排成等边三角形并靠得很近时，由于三圆柱间强烈的缝隙流动，大大地改变了绕流其中的串列双圆柱的流态。特别，当三圆柱中心距等于二倍圆柱直径时，在串列双柱的前、后柱之间形成了强烈的偏斜的缝隙流，出现了独特的压力分布以及要比单柱高出三倍以上的旋涡脱落频率。     

不可压粘性流体浸入边界直接力法及软件实现

浸入边界法通过在N-S方程中施加体积力模拟不可滑移固壁边界及动边界,避免生成复杂贴体网格及动网格,极大地节省了网格建模时间及动网格计算消耗。本文提出一种新型附加体积力简化计算方法,将简化附加体积力以源项形式嵌入动量方程迭代中,通过用户自定义函数对CFD软件FLUENT二次开发,实现了浸入边界法和通用流体力学求解器的耦合计算。通过静止圆柱和动圆柱绕流数值模拟进行了验证,并探讨了插值函数对计算精度的影响。研究表明,通过引入浸入边界模型,能够提高计算效率,并实现结构网格背景下复杂边界和动边界的高效建模。     

两种浸入式边界方法的比较

介绍两类不同的浸入式边界方法及其对它的改进. 然后采用均匀矩形交错网格和压力校正投影法,对不可压流场中的二维圆柱绕流进行了数值求解并对比了两类方法的精度.计算分析表明,连续显力法具有构造简单,适用性强的优点. 但离散隐力法在物面边界精度上要优于前者. 改进后,在二阶精度的离散格式下物面边界精度较低的显示力源法的精度有一定提高,同时发现,加密网格以提高数值精度的方法对于连续显力法并不总是有效.而同样格式下,离散隐力法具有更高精度,其中预测-校正离散隐力法可以在此基础上获得更小的计算误差和更快的收敛速度. 数值解与文献已有的数值和实验结果吻合得很好,表明边界算法及其程序是可靠和有效的.      

基于反馈力浸入边界法模拟复杂动边界流动

浸入边界法是模拟流固耦合的重要数值方法之一。本文采用反馈力浸入边界方法,对旋转圆柱和水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟。其中,固体边界采用一系列离散的点近似代替,流体为不可压缩牛顿流体,使用笛卡尔自适应加密网格,利用有限差分法进行求解。固体对流场的作用通过构造适宜的反馈力函数实现。本文首先通过旋转圆柱绕流的计算结果同实验结果进行对比,吻合较好,验证了该计算方法的可靠性。然后针对水电站水力过渡过程中水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟,得到导叶动态绕流后的流场分布特性和涡结构的演化特性。     

适用于浸入边界法的大涡模拟紊流壁面模型

基于近壁定常剪切应力假设,提出了一种新的适用于浸入边界法的大涡模拟紊流壁面模型。通过引入壁面滑移速度,修正了线性速度剖面计算得到的壁面剪切应力,使之满足Werner-Wengle模型。将其应用于平板紊流和高Re数圆管紊流的数值模拟,对比采用和不采用壁面模型的结果得知,采用此模型的速度剖面与实验值吻合良好,验证了此模型的有效性。研究了不同欧拉/拉格朗日网格相对位置对结果的影响,证明了此模型具有较好的鲁棒性,以及可根据局部流动状态和网格精度自动开闭的特点。     

一种强耦合预估-校正浸入边界法

为克服传统浸入边界法的质量不守恒缺陷,提出了一种用于可压缩流固耦合问题的强耦合预估-校正浸入边界法。通过阐述一般流固耦合系统的矩阵表示,推导了流固耦合系统的强耦合Gauss-Seidel迭代格式,进一步导出预估-校正格式,提出了预估-校正浸入边界法。该方法使用无耦合边界模型对流体进行预估,将流固耦合边界视为自由面,固体原本占据的空间初始化为零质量的单元,允许流体自由穿过耦合边界。对于流体的计算,使用带有minmod限制器的二阶MUSCL有限体积格式和基于Zha-Bilgen分裂的AUSM+-up方法,配合三阶Runge-Kutta格式推进时间步。在校正步骤中,通过一组质量守恒的输运规则来实现输运过程。输运算法可概括为将边界内侧的流体进行标记,根据标记顺序以均匀方式分割和移动流体,产生一个指向边界外侧的流动,最后在边界附近施加速度校正保证无滑移条件。标记和输运算法避免了繁琐的对截断单元的几何处理,确保了算法易于实现。对于固体的计算,分别采用一阶差分格式和隐式动力学有限元格式求解刚体和线弹性体,并利用高斯积分获得固体表面的耦合力。使用预估-校正浸入边界法计算了一维问题和二维问题。在一维活塞问题中,获得了压力分布、相对质量历史和误差曲线,并与其他方法进行了对比。在二维的激波冲击平板问题中,获得了数值模拟纹影和平板结构的挠度历史,并与实验结果进行了对比。研究表明,该方法区别于传统的虚拟网格方法和截断单元方法,能够精确地维持流场的质量守恒并易于实现,且具有一阶收敛精度,能够较准确地预测激波绕射后的流场以及平板在激波作用下的挠度,为开发流固耦合算法提供了一种新的思路。     

基于浸入边界算法的振动钝体绕流模拟研究

传统CFD方法在振动钝体绕流计算中常借助动网格技术,网格再生任务繁重。针对于此,本文利用可在静止网格中计算动边界绕流问题的浸入边界算法(IBM),编写数值模拟程序,分别对竖向强迫正弦振动方柱(Re=UD/v=103、振幅恒定、振动频率变化)以及桥梁断面(Re=UB/v=7.5×103、振幅、振动频率均变化)展开气动特性和流场特征结构分析。初步研究结果表明,振幅恒定为方柱高度的14%时,其涡脱锁定区长度为0.06~0.2,锁定区后端(Stc0.2)振动方柱涡脱频率回归静止涡脱频率;不同振幅下的桥梁断面阻力系数均在静止涡脱频率处产生峰值,桥梁断面升力系数则在此处均出现归零效应,且振幅越大,归零效应愈明显。     

亚临界雷诺数下圆柱绕流的大涡模拟

本文应用Smagorinsky涡粘性模式和二阶精度的有限体积法对圆柱绕流的流场进行大涡模拟．求解了非正交曲线坐标系下的N-S方程,对雷诺数为100和20000的工况进行了计算．计算结果与实验及动力涡粘性模式的结果进行了比较,表明计算对于层流及高亚临界雷诺数的湍流流动是合理的     

基于浸入边界法的扑翼飞行数值模拟

本文提出了基于浸入边界法的扑翼鸟建模与仿真,首先检验了数值方法的精确性,而后对NACA 0012翼型的升沉运动与俯仰运动进行了研究,最后对三维扑翼的翅膀拍动时间非对称性进行了研究。结果表明：浸入边界法对拍动翼型的模拟能够很好地和文献结果吻合。升沉运动的推进能力由翼型前缘涡的大小和位置决定,升沉运动推进效率的峰值主要集中在0.3≤St≤0.4时。升沉运动耦合俯仰运动时,在俯仰角25°及相位差85°时,推进效率达到峰值。在三维模拟中,适当增加翅膀下拍速度,能提供更大的升力,同时耗能也更高。研究结果可以为微型扑翼飞行器的扑动参数设置提供参考。

     

An immersed boundary finite difference method for LES of flow around bluff shapes

A three‐dimensional numerical model using large eddy simulation (LES) technique and incorporating the immersed boundary (IMB) concept has been developed to compute flow around bluff shapes. A fractional step finite differences method with rectilinear non‐uniform collocated grid is employed to solve the governing equations. Bluff shapes are treated in the IMB method by introducing artificial force terms into the momentum equations. Second‐order accurate interpolation schemes for all sorts of grid points adjacent to the immersed boundary have been developed to determine the velocities and pressure at these points. To enforce continuity, the methods of imposition of pressure boundary condition and addition of mass source/sink terms are tested. It has been found that imposing suitable pressure boundary condition (zero normal gradient) can effectively reproduce the correct pressure distribution and enforce mass conservation around a bluff shape. The present model has been verified and applied to simulate flow around bluff shapes: (1) a square cylinder and (2) the Tsing Ma suspension bridge deck section model. Complex flow phenomena such as flow separation and vortex shedding are reproduced and the drag coefficient, lift coefficient, and pressure coefficient are calculated and analyzed. Good agreement between the numerical results and the experimental data are obtained. The model is proven to be an efficient tool for flow simulation around bluff bodies in time varying flows. Copyright © 2004 John Wiley & Sons, Ltd.     

An immersed boundary method for simulation of inviscid compressible flows

In this paper, an immersed boundary method for simulating inviscid compressible flows governed by Euler equations is presented. All the mesh points are classified as interior computed points, immersed boundary points (interior points closest to the solid boundary), and exterior points that are blanked out of computation. The flow variables at an immersed boundary point are determined via the approximate form of solution in the direction normal to the wall boundary. The normal velocity is evaluated by applying the no‐penetration boundary condition, and therefore, the influence of solid wall in the inviscid flow is taken into account. The pressure is computed with the local simplified momentum equation, and the density and the tangential velocity are evaluated by using the constant‐entropy relation and the constant‐total‐enthalpy relation, respectively. With a local coordinate system, the present method has been extended easily to the three‐dimensional case. The present work is the first endeavor to extend the idea of hybrid Cartesian/immersed boundary approach to compressible inviscid flows. The tedious task of handling multi‐valued points can be eliminated, and the overshoot resulting from the extrapolation for the evaluation of flow variables at exterior points can also be avoided. In order to validate the present method, inviscid compressible flows over fixed and moving bodies have been simulated. All the obtained numerical results show good agreement with available data in the literature. Copyright © 2014 John Wiley & Sons, Ltd.     

An immersed boundary method for incompressible flows using volume of body function

A simple and effective immersed boundary method using volume of body (VOB) function is implemented on unstructured Cartesian meshes. The flow solver is a second‐order accurate implicit pressure‐correction method for the incompressible Navier–Stokes equations. The domain inside the immersed body is viewed as being occupied by the same fluid as outside with a prescribed divergence‐free velocity field. Under this view a fluid–body interface is similar to a fluid–fluid interface encountered in the volume of fluid (VOF) method for the two‐fluid flow problems. The body can thus be identified by the VOB function similar to the VOF function. In fluid–body interface cells the velocity is obtained by a volume‐averaged mixture of body and fluid velocities. The pressure inside the immersed body satisfies the same pressure Poisson equation as outside. To enhance stability and convergence, multigrid methods are developed to solve the difference equations for both pressure and velocity. Various steady and unsteady flows with stationary and moving bodies are computed to validate and to demonstrate the capability of the current method. Copyright © 2005 John Wiley & Sons, Ltd.     

A new modification of the immersed‐boundary method for simulating flows with complex moving boundaries

In this paper, a new immersed‐boundary method for simulating flows over complex immersed, moving boundaries is presented. The flow is computed on a fixed Cartesian mesh and the solid boundaries are allowed to move freely through the mesh. The present method is based on a finite‐difference approach on a staggered mesh together with a fractional‐step method. It must be noted that the immersed boundary is generally not coincident with the position of the solution variables on the grid, therefore, an appropriate strategy is needed to construct a relationship between the curved boundary and the grid points nearby. Furthermore, a momentum forcing is added on the body boundaries and also inside the body to satisfy the no‐slip boundary condition. The immersed boundary is represented by a series of interfacial markers, and the markers are also used as Lagrangian forcing points. A linear interpolation is then used to scale the Lagrangian forcing from the interfacial markers to the corresponding grid points nearby. This treatment of the immersed‐boundary is used to simulate several problems, which have been validated with previous experimental results in the open literature, verifying the accuracy of the present method. Copyright © 2006 John Wiley & Sons, Ltd.     

A diffuse-interface immersed boundary method for simulation of compressible viscous flows with stationary and moving boundaries

In this paper, a diffuse-interface immersed boundary method (IBM) is proposed for simulation of compressible viscous flows with stationary and moving boundaries. In the method, the solution of flow field and the implementation of boundary conditions are decoupled into two steps by applying the fractional step technique, ie, the predictor step and the corrector step. Firstly, in the predictor step, the intermediate flow field is resolved by a recently developed gas kinetic flux solver (GKFS) without consideration of the solid boundary. The GKFS is a finite volume approach that solves the Navier-Stokes equations for the flow variables at cell centers. In GKFS, the inviscid and viscous fluxes are evaluated as a single entity by reconstructing the local solution of continuous Boltzmann equation. Secondly, in the corrector step, the intermediate flow field is corrected by the present diffuse-interface IBM. During this process, the velocity field is firstly corrected by the implicit boundary condition–enforced IBM so that the no-slip boundary condition can be accurately satisfied. After that, the density correction is made by an iterative approach with the help of the continuity equation. Finally, the correction of the temperature field is made in the same way as that of the velocity field. Good agreements between the present simulations and the reference data in literature demonstrate the reliability of the proposed method.