顶空-气相色谱法进展

回顾了顶空采样气相色谱分析法在复杂基质中挥发性成分中的应用．总结并详述了顶空分析的三种重要模式-介绍了顶空分析的相关原理和整个顶空分析系统的参数优化过程．综述了顶空．气相色谱分析在生物样本中挥发性有机物的测定、药品中有机残留溶剂的检测、聚合材料中挥发性有机物的分析、环境中有害的有机挥发性物质分析、挥发油分析和烟草分析等方面的进展．     

顶空-气相色谱-离子迁移谱法快速测定化妆品中5种香料的含量

提出了顶空-气相色谱-离子迁移谱法快速测定化妆品中丙烯酸乙酯、苧烯、反式-2-庚烯醛、芳樟醇、柠檬醛等5种香料含量的方法。取化妆品样品或用水稀释后的化妆品样品,在80℃下孵化20 min,顶空进样,在正离子模式,迁移管线性电压400 V·cm^-1,迁移管温度45℃,迁移气流量150 mL·min^-1的条件下测定样品中丙烯酸乙酯、苧烯、反式-2-庚烯醛、芳樟醇、柠檬醛等5种香料的含量。结果表明,5种香料标准曲线的线性范围为0.1～5.0 mg·L^-1,检出限(3S/N)为0.02～0.05 mg·L^-1。方法用于分析8批化妆品,检出苧烯和芳樟醇两种香料,检出量为0.005～352μg·g^-1,与常规气相色谱-串联质谱法检测结果进行对比,相对偏差为-8.6%～10%。     

顶空-气相色谱质谱法测定水中10种氯苯类化合物

文文建立了不同水体中10种氯苯类化合物的顶空-气相色谱质谱的检测方法;优化了10种氯苯类化合物的最佳顶空条件,10种氯苯类化合物的最佳顶空条件为水样pH5～6,氯化钠加入量为4.0g,顶空加热平衡温度55℃,加热平衡时间20min,震荡,在此顶空条件下,可以获得满意的10种氯苯类化合物的响应值和回收率.10种氯苯类化合...     

碳纳米管顶空固相微萃取测定水中的多溴联苯醚

建立了顶空固相微萃取联结气相色谱-电子捕获检测器（HS-SPME-GC-ECD）测定水中多溴联苯醚的方法。制作了多壁碳纳米管涂层固相微萃取探头。优化了萃取时间,萃取温度,搅拌速度,顶空体积,溶液的pH,离子强度及有机溶剂等影响萃取效率的各种因素。比较了室温和100 ℃顶空萃取和直接萃取的效率。结果表明,室温下直接萃取比顶空萃取的效率高2-4倍,而在100 ℃时顶空萃取比直接萃取的效率高1-8倍。除BDE-154外,无论直接萃取还是顶空萃取,100 ℃时的萃取效率均高于室温。方法的线性范围50-1600 ng/L,相关系数为0.995-0.998,5种多溴联苯醚的最低检出限（S/N=3）为1.14-16.25 ng/L,相对标准偏差（RSD%,n=5）小于10%。本方法用于真实水样的测定,回收率为74.2%-98.7%。     

基于灰色模型的乙酸乙烯酯顶空进样质量不确定度评定

鉴于静态顶空进样器进样质量的测定数据有限且分布规律未知,建立了一种基于灰色模型的不确定度评定方法。采用静态顶空-气相色谱和两次相平衡分析法,测定乙酸乙烯酯的顶空进样质量,将整个分析检测视为灰色过程,用灰色系统理论的数学模型评定乙酸乙烯酯的顶空进样质量标准差和不确定度,并与统计学方法评定结果进行比较。灰色模型的不确定度与统计学方法计算值相对偏差为3.65%。该方法可快速评定不确定度,结果可靠。     

动态微波辅助顶空固相微萃取-气相色谱-质谱法测定芹菜叶中的化学成分

采用动态微波辅助顶空固相微萃取结合气相色谱-质谱法测定芹菜叶中的挥发性和半挥发性化学成分。对水蒸气蒸馏、顶空固相微萃取、微波辅助顶空固相微萃取、动态微波辅助顶空固相微萃取等4种不同的前处理方法进行了比较,通过气相色谱-质谱分析,分别鉴定出20,17,36,41种化学成分,主要化合物为α-月桂烯、柠檬烯、β-顺式罗勒烯、β-芹子烯和(Z)-3-己烯-1-醇等。结果表明:动态微波辅助顶空固相微萃取是一种简单、快速、易操作,无需净化步骤,消耗样品量少,对于沸点较高的半挥发性物质的萃取效果优于微波辅助顶空固相微萃取的方法,可用于分析各类植物中的挥发性和半挥发性化学成分。     

气相色谱顶空分析

顶空分析(Head Space Analysis)并非新技术,由于近年来作为一种样品前处理方式与气相色谱联用才促进其迅速发展。方法原理是将成分复杂的有机样品置于密闭系统中,恒温加热平衡后,测定蒸气相中组分,间接得到组分在样品中含量。它使复杂样品分析的提取、净化程序一次完成,大大简化了样品前处理操作。 Hachenberg等对顶空分析技术已有较全面的论述,Perkin-Elmer公司生产了专用仪器装置。在食品、水质及包装材料等分析中这一技术已得到日益广泛的应用。     

静态顶空GC-MS法测定化妆品中的甲醛

建立了化妆品中甲醛的快速检测方法.采用自动顶空GC-MS法,优化顶空条件,选用叔丁醇作为内标,甲醛浓度在5.6～560μg/g范围内,线性良好(r=0.9995).甲醛的最低检出浓度为0.6μg/g,回收率90.23%～108.79%,RSD在4.3%～9.4%之间.     

香花顶空挥发物的分析

一、香料分析简况芳香植物是植物王国中的重要一类。芳香植物的花、叶、根、茎、果实或种子等可用来提取香料。工业上,植物香料的主要产品形式有精油、净油和浸膏。     

水蒸气蒸馏提取与顶空进样GC-MS分析高良姜挥发性成分

比较了水蒸气蒸馏法和顶空加热法提取高良姜挥发性成分的方法,并进行GC-MS分析。结果表明,两种提取方法无论在成分还是其相对含量均存在一定的差异。采用顶空进样技术可鉴定出31个挥发性化学成分,采用水蒸气蒸馏法可鉴定出31个挥发性化学成分,两种方法共有成分为16种。两种样品采集方法分别提供了高良姜不同沸点挥发物的化学信息,运用这两种方法可以建立更全面的高良姜挥发性成分GC-MS表征体系。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.