A cyclometalated iridium(III) complex with enhanced phosphorescence emission in the solid state (EPESS): synthesis, characterization and its application in bioimaging

Iridium(III) complexes with intense phosphorescence in solution have been widely applied in organic light-emitting diodes, chemosensors and bioimaging. However, little attention has been paid to iridium(III) complexes showing weak phosphorescence in solution and enhanced phosphorescence emission in the solid state (EPESS). In the present study, two β-diketonate ligands with different degrees of conjugation, 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HL1) and 1-phenyl-3-methyl-4-phenylacetyl-5-pyrazolone (HL2), have been synthesized to be used as ancillary ligands for two iridium(III) complexes, Ir(ppy)(2)(L1) and Ir(ppy)(2)(L2) (Hppy = 2-phenylpyridine). The two complexes have been characterized by single-crystal X-ray crystallography, (1)H NMR and elemental analysis. Interestingly, Ir(ppy)(2)(L1) is EPESS-active whereas Ir(ppy)(2)(L2) exhibits moderately intense emission both in solution and as a neat film, indicating that the degree of conjugation of the β-diketone ligands determines the EPESS-activity. The single-crystal X-ray analysis has indicated that there are π-π interactions between the adjacent ppy ligands in Ir(ppy)(2)(L1) but not in Ir(ppy)(2)(L2). Finally, EPESS-active Ir(ppy)(2)(L1) has been successfully embedded in polymer nanoparticles and used as a luminescent label in bioimaging.     

Solvent extraction of lanthanum(III), europium(III) and lutetium(III) with fluorinated 1-phenyl-3-methyl-4-benzoyl-5-pyrazolones into chloroform

A series of chelating reagents, 1-phenyl-3-methyl-4-(2-fluorobenzoyl)-5-pyrazolone, 1-phenyl-3-methyl-4-(3-fluorobenzoyl)-5-pyrazolone and 1-phenyl-3-methyl-4-(4-fluorobenzoyl)-5-pyrazolone, has been synthesized. The extraction of Ln(III), (Ln = La, Eu and Lu) into chloroform with these reagents at 30 +/- 1 degrees has been studied. The composition of the complexes extracted has been determined by the slope method, and the extraction constants K(ex), were measured. The presence of the fluorine atom in the reagents does not make the K(ex), values much different from those obtained with the parent pyrazolone.     

Catalytic Potential of Pyrazolone Based Dioxidomolybdenum(VI) Complexes for Multicomponent Biginelli Reactions,Epoxidation of Olefins and Oxidative Bromination of Phenol Derivatives

Three different types of dioxidomolybdenum(VI) complexes of 4-acetyl-3-methyl-1-phenyl-5-pyrazolone (Hmp, I )), 3-methyl-1-phenyl-4-propionyl-5-pyrazolone (Hpp, II ), 4-butyryl-3-methyl-1-phenyl-5-pyrazolone (Hbutp, III ), and 4-isobutyryl-3-methyl-1-phenyl-5-pyrazolone (isobutp, IV ) have been isolated and characterized by various spectroscopic (FT-IR, UV/Vis, ¹H and ¹³C NMR) techniques, thermal analysis and single crystal X-ray analysis. These complexes adopt a distorted six-coordinate octahedral geometry where ligands act as bidentate, coordinating through the two O atoms. These complexes have been used as catalysts to explore a single pot multicomponent (benzaldehyde or its derivatives, urea/thiourea and ethyl acetoacetate/phenyl acetoacatate) Biginelli reaction producing biologically active 3,4-dihydropyrimidin-2-(1H)-one and 3,4-dihydropyrimidin-2-(1H)-thione based biomolecules under solvent-free conditions. Presence of H₂O₂ improves the yield of dihydropyrimidin-2-(1H)-one but it acts as poison for the later molecule. Epoxidation of internal and terminal alkenes mainly resulted in the formation of the corresponding epoxide. The catalytic oxidative bromination of thymol, a reaction facilitated by vanadium dependent haloperoxidases, resulted in the formation of three product namely 2-bromothymol, 4-bromothymol and 2,4-bromothymol. Other phenol derivatives have also been brominated effectively.     

The influence of triplet energy levels of bridging ligands on energy transfer processes in Ir(III)/Eu(III) dyads

A series of N^N,O^O-bridging ligands based on substituted 1-(pyridin-2-yl)-3-methyl-5-pyrazolone and their corresponding heteroleptic iridium(III) complexes as well as Ir-Eu bimetallic complexes were synthesized and fully characterized. The influence of the triplet energy levels of the bridging ligands on the energy transfer (ET) process from the Ir(III) complexes to Eu(III) ions in solution was investigated at 77 K in Ir(III)/Eu(III) dyads. Photophysical experiment results show the bridging ligands play an important role in the ET process. Only when the triplet energy level of the bridging ligand was lower than the triplet metal-to-ligand charge transfer ((3)MLCT) energy level of the Ir moiety, was pure emission from the Eu(III) ion observed, implying complete ET took place from the Ir moiety to the Eu(III) ion.     

铽与4—酰代吡唑啉酮—5的三元配合物的合成与荧光性质

合成并表征了一系列铽与含不同４－酰代的１－苯基－３－甲基－吡唑啉酮－５的三元配合物Ｔｂ９Ｌ）３．２Ｈ２Ｏ和Ｔｂ（Ｌ）３．Ｄｉｐｙ「Ｌ＝１－苯基－３－甲基－４－乙酰基吡啥林酮－５（ＰＭＡＰ），１－苯基－３－甲基－４－丙酰基吡唑啉酮－５（ＰＭＰＰ），１－苯基－３－甲基－４－异丁酰基吡唑啉酮－５（ＰＭＩＢＰ），１－苯基－３－甲基－４－特戊酰基吡唑啉酮－５（ＰＭＰＶＰ），１－苯基－３－甲基－４－苯甲酰基吡     

3-Phenyl-4-benzoyl-5-isoxazolonate complex of Eu3+ with tri-n-octylphosphine oxide as a promising light-conversion molecular device

Three new europium complexes, [Eu(PBI)3.3H2O] (1), [Eu(PBI)3.2TOPO] (2), and [Eu(PBI)3.2TPPO.H2O] (3) (where HPBI, TOPO, and TPPO stand for 3-phenyl-4-benzoyl-5-isoxazolone, tri-n-octylphosphine oxide, and triphenylphosphine oxide, respectively), with different neutral ligands were synthesized and characterized by elemental analysis, Fourier transform infrared, (1)H NMR, thermogravimetric analysis, and photoluminescence (PL) spectroscopy. The coordination geometries of the complexes were calculated using the Sparkle/AM1 (Sparkle Model for the Calculation of Lanthanide Complexes within the Austin Model 1) model. The ligand-Eu3+ energy-transfer rates were calculated in terms of a model of the intramolecular energy-transfer process in lanthanide coordination compounds reported in the literature. The room-temperature PL spectra of the europium(III) complexes are composed of the typical Eu3+ red emission, assigned to transitions between the first excited state (5D0) and the multiplet (7F(0-4)). On the basis of emission spectra and lifetimes of the 5D0-emitting level, the emission quantum efficiency (eta) was determined. The results clearly show that the substitution of water molecules by TOPO leads to greatly enhanced quantum efficiency (i.e., 26% vs 92%) and longer 5D0 lifetimes (250 vs 1160 micros). This can be ascribed to a more efficient ligand-to-metal energy transfer and a less nonradiative 5D0 relaxation process. Judd-Ofelt intensity parameters (Omega2 and Omega4) were determined from the emission spectra for the Eu3+ ion based on the 5D0 --> 7F2 and 5D0 --> 7F4 electronic transitions, respectively, and the 5D0 --> 7F1 magnetic-dipole-allowed transition was taken as the reference. A point to be noted in these results is the relatively high value of the Omega2 intensity parameter for all of the complexes. This may be interpreted as being a consequence of the hypersensitive behavior of the 5D0 --> 7F2 transition. The dynamic coupling mechanism is, therefore, dominant, indicating that the Eu3+ ion is in a highly polarizable chemical environment.     

Anionic lanthanide complexes with 3-methyl-4-formyl-1-phenyl-5-pyrazolone

The coordination compounds Na[LnL₄] · 2H₂O and [NBu₄][LnL₄] (Ln = Nd, Sm, Eu, Tb; HL is 3-methyl-4-formyl-1-phenyl-5-pyrazolone) have been synthesized and studied by IR spectroscopy and thermogravimetry. According to X-ray diffraction data, the coordination polyhedra of lanthanides are shaped as square antiprisms and formed by the oxygen atoms of four deprotonated moieties of the enol form of 4-formyl-5-pyrazolone. In the complex Na[EuL₄] · 2H₂O, sodium cations are bonded to the two nitrogen atoms of pyrazole heterocycles, combining discrete complex anions into two interpenetrating three-dimensional frameworks. Polycrystalline samples of neodymium(III), samarium(III), and terbium(III) complexes manifest intense luminescence in the spectral regions that are typical for them.     

The study on the effect and mechanism of the second ligands on the luminescence properties of terbium complexes

The binary complex of Tb(III) with N-phenylanthranilic acid (N-HPA) was synthesized, and the ternary complexes were synthesized by introducing 1,10-phenanthroline (Phen), 2,2'-dipyridyl (Bipy), trioctylphosphine oxide (TPPO) as the second ligand, respectively. These complexes were characterized by infrared spectra, UV spectra and fluorescence spectra. The effect and mechanism of different second ligands on the fluorescent intensity of the terbium N-phenylanthranilic acid complexes was discussed. It showed that all the complexes exhibited ligand-sensitized green emission. The luminescence intensity increased in the sequence of Tb(N-PA)(3)Phen相似文献   

噻吩甲酰基吡唑啉酮缩β-丙氨酸配合物的合成、表征及极谱行为

An ewacylpyrazolone Schiff base and its metal complexes were synthesized. The electrochemical behaviour of complexes was studied. In non-aqueous solvent, the new Schiff base 1-phenyl-3-methyl-4-(2-thenoyl)-5-pyrazolone-2-alanine (HL) was synthesized by the reaction of 2-alanine with 1-phenyl-3-methyl-4-(2-thenoyl)-5-pyrazolone and its complexes UO2(II), Cu(II), Co(II) and Fe(II) were obtained from refluxing a solution of Schiff base and metal nitrate. The polarographic wave of Cu(II) complex was determined at 1.24V(vs.SCE) in the medium of HAc-NaAc (PH=4.6). On the basis of elemental analysis and molar conductance, the general formula of the complexes, UO2L2?H2O,CuL2?2H2O,CoL2?2H2O and FeL2?2H2O, were given. They were characterized by IR, UV-visible, 1H NMR, 13CNMR, thermal analyses and magnetic moments. The results show that the metal ions except UO2 2+ exhibit six coordination in the complexes. The peak current is produced by the reduction of Cu2+ in the copper complex, and the number of electron transfer is 1 at electrode reaction.     

Synthesis, crystal structure, and luminescent properties of novel Eu3+ heterocyclic beta-diketonate complexes with bidentate nitrogen donors

New tris(heterocyclic beta-diketonato)europium(III) complexes of the general formula Eu(PBI)3.L [where HPBI = 3-phenyl-4-benzoyl-5-isoxazolone and L = H2O, 2,2'-bipyridine (bpy), 4,4'-dimethoxy-2,2'-bipyridine (dmbpy), 1,10-phenanthroline (phen), or 4,7-diphenyl-1,10-phenanthroline (bath)] were synthesized and characterized by elemental analysis, Fourier transform infrared spectroscopy (FT-IR), 1H NMR, high-resolution mass spectrometry, thermogravimetric analysis, and photoluminescence (PL) spectroscopy. Single-crystal X-ray structures have been determined for the complexes Eu(PBI)3.H2O.EtOH and Eu(PBI)3.phen. The complex Eu(PBI)3.H2O.EtOH is mononuclear, and the central Eu3+ ion is coordinated by eight oxygen atoms to form a bicapped trigonal prism coordination polyhedron. Six oxygens are from the three bidentate HPBI ligands, one is from a water molecule, and another is from an ethanol molecule. On the other hand, the crystal structure of Eu(PBI)3.phen reveals a distorted square antiprismatic geometry around the europium atom. The room-temperature PL spectra of the europium(III) complexes are composed of the typical Eu3+ red emission, assigned to transitions between the first excited state (5D0) and the multiplet (7F0-4). The results demonstrate that the substitution of solvent molecules by bidentate nitrogen ligands in Eu(PBI)3.H2O.EtOH richly enhances the quantum yield and lifetime values. To elucidate the energy transfer process of the europium complexes, the energy levels of the relevant electronic states have been estimated. Judd-Ofelt intensity parameters (Omega2 and Omega4) were determined from the emission spectra for Eu3+ ion based on the 5D0 --> 7F2 and 5D0 --> 7F4 electronic transitions, respectively, and the 5D0 --> 7F1 magnetic dipole allowed transition was taken as the reference. The high values obtained for the 4f-4f intensity parameter Omega2 for europium complexes suggest that the dynamic coupling mechanism is quite operative in these compounds.     

Ferromagnetic coupling in trinuclear, partial cubane Cu(II) complexes with a micro(3)-OH core: magnetostructural correlations

Three new trinuclear copper(II) complexes, [(CuL(1))(3)(micro(3)-OH)][ClO(4)](2).3 H(2)O (1), [(CuL(2))(3)(micro(3)-OH)][ClO(4)](2).H(2)O (2), and [(CuL(3))(3)(micro(3)-OH)][ClO(4)](2).7 H(2)O (3) have been synthesized from the three tridentate Schiff bases HL(1), HL(2), and HL(3) (HL(1)=6- aminomethyl-3-methyl-1-phenyl-4-azahex-2-en-1-one, HL(2)=6-aminoethyl-3-methyl-1-phenyl-4-azahex-2-en-1-one, and HL(3)=6-aminodimethyl-3-methyl-1-phenyl-4-azahex-2-en-1-one). They have been characterized by X-ray crystallography and IR and UV spectroscopy, and their magnetic properties have been investigated. All the compounds contain a partial cubane [Cu(3)O(4)] core consisting of the trinuclear unit [(CuL)(3)(micro(3)-OH)](2+), perchlorate ions, and water molecules. In each of the complexes, the copper atoms are five-coordinate with a distorted square-pyramidal geometry except complex 1, in which one of the Cu(II) of the trinuclear unit is weakly coordinated to one of the perchlorate ions. Magnetic measurements performed in SQUID MPMS-XL7 using polycrystalline samples at an applied field of 2 kOe indicate a global intramolecular ferromagnetic coupling. Magnetostructural correlations have been calculated on the basis of theoretical models without symmetry restriction. Continuous shape measurements are an appropriate tool for establishing the degree of distortion of the Cu(II) from square-planar geometry. Structural, theoretical, and experimental magnetic data indicate that the higher the degree of distortion, the greater the ferromagnetic coupling.     

Synthesis, characterizations and luminescent properties of three novel aryl amide type ligands and their lanthanide complexes

Three new aryl amide type ligands, N-(phenyl)-2-(quinolin-8-yloxy)acetamide (L(1)), N-(benzyl)-2-(quinolin-8-yloxy)acetamide (L(2)) and N-(naphthalene-1-yl)-2-(quinolin-8-yloxy)acetamide (L(3)) were synthesized. With these ligands, three series of lanthanide(III) complexes were prepared: [Ln(L(1))(2)(NO(3))(2)]NO(3), [Ln(L(2))(2)(NO(3))(2)(H(2)O)(2)]NO(3).H(2)O and [Ln(L(3))(2)(NO(3))(2)(H(2)O)(2)]NO(3).H(2)O (Ln=La, Sm, Eu, Gd). The complexes were characterized by the elemental analyses, molar conductivity, (1)H NMR spectra, IR spectra and TG-DTA. The fluorescence properties of complexes in the solid state and the triplet state energies of the ligands were studied in detail, respectively. It was found that the Eu(III) complexes have bright red fluorescence in solid state. The energies of excited triplet state for the three ligands are 20325 cm(-1) (L(3)), 21053 cm(-1) (L(2)) and 22831 cm(-1) (L(1)), respectively. All the three ligands sensitize Eu(III) strongly and the order of the emission intensity for the Eu(III) complexes with the three ligands is L(3)>L(2)>L(1). It can be explained by the relative energy gap between the lowest triplet energy level of the ligand (T) and (5)D(1) of Eu(III). This means that the triplet energy level of the ligand is the chief factor, which dominates Eu(III) complexes luminescence.     

Attempted syntheses of lanthanide(III) complexes of the anisole- and anilinosquarate ligands

The polymeric lanthanide complexes (Ln(mu-CH3OC6H5C4O3)(CH3OC6H5C4O3)2 (H2O)4.xH2O)n [Ln=La (1), Eu (2), Gd (3)], formed from the reaction of aqueous solutions of anisolesquarate and Ln(NO3)3.xH2O, are all structurally similar with only subtle differences between the lanthanum complex and the isomorphous pair of europium and gadolinium analogues. The lanthanum atom in 1 has a square antiprismatic coordination geometry comprising two pendant and two mu-1,3-bridging anisolesquarate groups and four aqua ligands. Complexes 2 and 3 have two independent metal atoms in their asymmetric units compared to one for the lanthanum complex. However, the gross structures of 1-3 are essentially the same. The asymmetric unit of the terbium complex ((CH3OC6H5C4O3)3Tb(H2O)4(mu-CH3OC6H5C4O3)(CH3OC6H5C4O3)2Tb(H2O)5).H2O (4) contains two independent binuclear units which hydrogen bond to form an extended structure very similar to those of 1-3. The ionic polymers ([Ln(mu2-C4O4)(H2O)6][C6H5NHC4O3].4H2O)n [Ln=Eu (5), Gd (6), Tb (7)] result from the incomplete hydrolysis of the anilinosquarate ion during the attempted synthesis of Eu(III), Gd(III), and Tb(III) anilinosquarate complexes. However, complete hydrolysis of the substituent is accomplished by La(III) ions, and the neutral polymer (La2(mu2-C4O4)2(mu3-C4O4)(H2O)11.2H2O)n (8) is formed. In complexes 5-7, the central lanthanide atom has a square antiprismatic geometry, being bonded to two mu-1,2-bridging squarate and six aqua ligands. Two anilinosquarate counteranions participate in second-sphere coordination via direct hydrogen bonding to aqua ligands on each metal center. These counteranions, and the included waters of crystallization, serve to link neighboring cationic polymer chains via an extensive array of O-H...O hydrogen bonds to form a 3-dimensional network. The polymeric lanthanum complex 8 contains two different metal environments, each having distorted monocapped square antiprismatic geometry. For one lanthanum atom the coordination polyhedron comprises five aqua and four squarate ligands, while for the other the polyhedron consists of six aqua and three squarate ligands; in each case one of the aqua ligands occupies the capping position. The squarate ligand exhibits two coordination modes in 8 (mu-1,2- and mu-1,3-bridging), and neighboring polymer chains are cross-linked by hydrogen bonds to form a 3-dimensional network.     

Rational design of 0D, 1D, and 3D open frameworks based on tetranuclear lanthanide(III) sulfonate-phosphonate clusters

Hydrothermal reactions of lanthanide(III) salts with m-sulfophenylphosphonic acid (H3L1) and 1,10-phenanthroline (phen) or N,N'-piperazinebis(methylenephosphonic acid) (H4L2) afforded six novel lanthanide(III) sulfonate-phosphonates based on tetranuclear clusters, namely, [La(2)(L1)2(phen)4(H2O)].4.5H2O (1), [Ln2(L1)2(phen)2(H2O)5].3H2O (Ln = Nd, 2; Eu, 3; Er, 4), and [Ln2(HL1)(H2L2)2(H2O)4].8H2O (Ln = La, 5; Nd, 6). Compounds 2-4 contain discrete tetranuclear lanthanide(III) cluster units in which four lanthanide(III) ions are bridged by two tridentate and two tetradentate phosphonate groups. In compound 1, the tetranuclear clusters are further interconnected into a 1D chain through the coordination of the sulfonate groups. The structures of compounds 5 and 6 can be viewed as a 3D architecture based on a different types of tetranuclear cluster units that are interconnected by bridging H2L2 anions. In the tetranuclear clusters of compounds 5 and 6, the four lanthanide(III) centers are interconnected by only two HL1 ligands. Compound 2 is a luminescent material in the near-IR region, whereas compound 3 displays a strong luminescent emission band in the red-light region. Magnetic property measurements of compounds 2-4 and 6 indicate that there are strong antiferromagetic interactions between magnetic centers within the cluster units.     

Mononuclear, dinuclear, hexanuclear, and one-dimensional polymeric silver complexes having ligand-supported and unsupported argentophilic interactions stabilized by pincer-like 2,6-bis(5-pyrazolyl)pyridine ligands

The mononuclear complexes [Ag(H2L1)(Py)2](NO3) x H2O (1, H2L1 = 2,6-bis(5-methyl-1H-pyrazol-3-yl)pyridine) and [Ag(NO3)(L()] (2, L2 = 2,6-bis(5-methyl-1-isopropyl-1H-pyrazol-3-yl)pyridine), dinuclear complex [Ag2(H2L3)2(HL4)2] (3, H2L3 = 2,6-bis(5-phenyl-1H-pyrazol-3-yl)pyridine, HL4 = 6-(5-phenyl-1H-pyrazolyl-3-yl)picolinate), one-dimensional polymer {[Ag2(H2L1)2](NO3)2 x H2O}(n) (4), and hexanuclear clusters [Ag6(HL1)4](X)2 (X = NO3-, 5 ; BF4-, 6 ; ClO4-, 7) stabilized by pincer-like bispyrazolyl ligands have been prepared and characterized using (1)H NMR spectroscopy, elemental analysis, IR spectroscopy, luminescence spectroscopy and X-ray diffraction. In complex , there is a ligand unsupported Ag-Ag bond between the two silver atoms. Complex displays a one-dimensional polymer consisting of an infinite Ag-Ag chain and every two adjacent silver ions are bridged by an H2L1 ligand. Complexes and have the same Ag6 cores in which six silver atoms are held together by four HL1 and five Ag-Ag bonds, while complex was held together by six Ag-Ag bonds. The silver-silver distances in these complexes are found in the range of 2.874(1)-3.333(2) A for ligand supported, and 3.040(1) A for ligand unsupported Ag-Ag bonds, respectively. Complexes 3-7 are strongly luminescent due to either intraligand or metal-ligand charge transfer processes.     

Highly luminescent, visible-emitting lanthanide macrocyclic chelates stable in water and derived from the cyclen framework

Two new tetraazamacrocyclic ligands are designed with the aim of sensitizing the luminescence of Tb(III) and Eu(III) ions in water: L5 [1,4,7,10-tetrakis[N-(phenacyl)carbamoylmethyl]-1,4,7,10-tetraazacyclododecane] and L6 [1,4,7,10-tetrakis[N-(4-phenylphenacyl)carbamoylmethyl]-1,4,7,10-tetraazacyclododecane]. These ligands react with lanthanide trifluoromethanesulfonates to yield stable 1:1 complexes in water (log K = 12.89 +/- 0.15 for EuL5). X-ray diffraction on [Tb(L5)(H(2)O)](CF(3)SO(3))(3) (P1 macro, a = 13.308(3) A, b = 14.338(3) A, c = 16.130(3) A, alpha = 101.37(3) degrees, beta = 96.16(3) degrees, gamma = 98.60(3) degrees ) shows the Tb(III) ion lying on a C(4) axis and being 9-coordinate, with one water molecule bound in its inner coordination sphere. The absolute quantum yields are determined in aerated water for the complexes formed with ions used in fluoroimmunoassays (Ln = Sm, Eu, Tb, and Dy). Large values are found for [Tb(H(2)O)(L5)](3+) and [Eu(H(2)O)(L6)](3+), in line with the molecular design of the receptors: 23.1% and 24.7%, respectively. The intense luminescence of these ions results from efficient intersystem crossing and L --> Ln energy transfer processes, as well as from a suitable shielding of the emitting ions from radiationless deactivation.     

Lanthanide-based coordination polymers assembled from derivatives of 3,5-dihydroxy benzoates: syntheses, crystal structures, and photophysical properties

Two new aromatic carboxylic acids, namely, 3,5-bis(benzyloxy)benzoic acid (HL1) and 3,5-bis(pyridine-2-ylmethoxy)benzoic acid (HL2), have been prepared by replacing the hydroxyl hydrogens of 3,5-dihydroxy benzoic acid with benzyl and pyridyl moieties, respectively. The anions derived from HL1 and HL2 have been used for the support of a series of lanthanide coordination compounds [Eu(3+) = 1-2; Tb(3+) = 3-4; Gd(3+) = 5-6]. The new lanthanide complexes have been characterized on the basis of a variety of spectroscopic techniques in conjunction with an assessment of their photophysical properties. Lanthanide complexes 2, 4, and 6, which were synthesized from 3,5-bis(pyridine-2-ylmethoxy)benzoic acid, were structurally authenticated by single-crystal X-ray diffraction. All three complexes were found to exist as infinite one-dimensional (1-D) coordination polymers with the general formula {[Ln(L2)(3)(H(2)O)(2)]·xH(2)O}(n). Scrutiny of the packing diagrams for 2, 4, and 6 revealed the existence of interesting two-dimensional molecular arrays held together by intermolecular hydrogen-bonding interactions. Furthermore, the coordinated benzoate ligands serve as efficient light harvesting chromophores. In the cases of 1-4, the lowest energy maxima fall in the range 280-340 nm [molar absorption coefficient (ε) = (0.39-1.01) × 10(4) M(-1) cm(-1)]. Moreover, the Tb(3+) complexes 3 and 4 exhibit bright green luminescence efficiencies in the solid state (Φ(overall) = 60% for 3; 27% for 4) and possess longer excited state lifetimes than the other complexes (τ = 1.16 ms for 3; 1.38 ms for 4). In contrast to the foregoing, the Eu(3+) complexes 1 and 2 feature poor luminescence efficiencies.     

Biomimetic iron(III) complexes of N3O and N3O2 donor ligands: protonation of coordinated ethanolate donor enhances dioxygenase activity

A series of iron(III) complexes 1-4 of the tripodal tetradentate ligands N,N-bis(pyrid-2-ylmethyl)-N-(2-hydroxyethyl)amine H(L1), N,N-bis(pyrid-2-ylmethyl)-N-(2-hydroxy- propyl)amine H(L2), N,N-bis(pyrid-2-ylmethyl)-N-ethoxyethanolamine H(L3), and N-((pyrid-2-ylmethyl)(1-methylimidazol-2-ylmethyl))-N-(2-hydroxyethyl)amine H(L4), have been isolated, characterized and studied as functional models for intradiol-cleaving catechol dioxygenases. In the X-ray crystal structure of [Fe(L1)Cl(2)] 1, the tertiary amine nitrogen and two pyridine nitrogen atoms of H(L1) are coordinated meridionally to iron(III) and the deprotonated ethanolate oxygen is coordinated axially. In contrast, [Fe(HL3)Cl(3)] 3 contains the tertiary amine nitrogen and two pyridine nitrogen atoms coordinated facially to iron(III) with the ligand ethoxyethanol moiety remaining uncoordinated. The X-ray structure of the bis(μ-alkoxo) dimer [{Fe(L5)Cl}(2)](ClO(4))(2)5, where HL is the tetradentate N(3)O donor ligand N,N-bis(1-methylimidazol-2-ylmethyl)-N-(2-hydroxyethyl)amine H(L5), contains the ethanolate oxygen donors coordinated to iron(III). Interestingly, the [Fe(HL)(DBC)](+) and [Fe(HL3)(HDBC)X] adducts, generated by adding ～1 equivalent of piperidine to solutions containing equimolar quantities of iron(III) complexes 1-5 and H(2)DBC (3,5-di-tert-butylcatechol), display two DBC(2-)→ iron(III) LMCT bands (λ(max): 1, 577, 905; 2, 575,915; 3, 586, 920; 4, 563, 870; 5, 557, 856 nm; Δλ(max), 299-340 nm); however, the bands are blue-shifted (λ(max): 1, 443, 700; 2, 425, 702; 3, 424, 684; 4, 431, 687; 5, 434, 685 nm; Δλ(max), 251-277 nm) on adding 1 more equivalent of piperidine to form the adducts [Fe(L)(DBC)] and [Fe(HL3)(HDBC)X]. Electronic spectral and pH-metric titration studies in methanol disclose that the ligand in [Fe(HL)(DBC)](+) is protonated. The [Fe(L)(DBC)] adducts of iron(III) complexes of bis(pyridyl)-based ligands (1,2) afford higher amounts of intradiol-cleavage products, whereas those of mono/bis(imidazole)-based ligands (4,5) yield mainly the auto-oxidation product benzoquinone. It is remarkable that the adducts [Fe(HL)(DBC)](+)/[Fe(HL3)(DBC)X] exhibit higher rates of oxygenation affording larger amounts of intradiol-cleavage products and lower amounts of benzoquinone.     

Syntheses, crystal structures and luminescent properties of new lanthanide(III) organoarsonates

The first examples of lanthanide(III) organoarsonates, Ln(L(1))(H(2)O)(3) (Ln = La (1), H(3)L(1) = 4-hydroxy-3-nitrophenylarsonic acid), Ln(L(1))(H(2)O)(2) (Ln = Nd (2), Gd (3)), and mixed-ligand lanthanide(III) organoarsonates, Ln(2)(HL(1))(2)(C(2)O(4))(H(2)O)(2) (Ln = Nd (4), Sm (5), Eu (6)), were hydrothermally synthesized and structurally characterized. Compounds 1-3 feature a corrugated lanthanide arsonate layer, in which 1D lanthanide arsonate inorganic chains are further interconnected via bridging L(1)(3-) ligands. Compounds 4-6 exhibit a complicated 3D network. The interconnection of the lanthanide(III) ions by the bridging arsonate ligand leads to the formation of a novel 3D framework with long narrow 1D tunnels along the a-axis, with the oxalate anions are located at the above tunnels and bridging with lanthanide(III) ions. Compounds 2 and 4 exhibit the characteristic emission bands of the Nd(III) ion, whereas compound 6 displays the characteristic emission bands of the Eu(III) ion. The magnetic properties of compounds 3-6 were also investigated.     

Solvent extraction behaviour of lanthanum(III), cerium(III), europium(III), thorium(IV) and uranium(VI) with 3-phenyl-4-benzoyl-5-isoxazolone

The extraction behaviour of La(III), Ce(III), Eu(III), Th(IV) and U(VI) with 3-phenyl-4- benzoyl-5-isoxazolone (HPBI) in chloroform has been studied. The mechanism of extraction and the species extracted have been identified. Extraction constants for each system have been calculated. The system has been used to separate Th(IV) from U(VI) and from La(III), Ce(III) and Eu(III). A comparison of the extraction constants with those for the 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) and thenoyltrifluoroacetone (HTTA) systems indicates that HPBI extracts these metal species better than HPMBP and HTTA do.