Phase Diagram of the System Tl<Subscript>2</Subscript>Te–Tl<Subscript>5</Subscript>Te<Subscript>3</Subscript>–Tl<Subscript>9</Subscript>GdTe<Subscript>6</Subscript>

The ternary system Tl–Gd–Te within the composition range Tl₂Te–T_l5Te₃–T_l9GdTe₆ was studied by a set of physicochemical analysis methods. Some internal polythermal sections and the isothermal section at 300 K of the phase diagram were built, projections of the liquidus and solidus surfaces were constructed, and the graphs of the concentration dependences of the parameters and microhardness were plotted. It was shown that much (more than 90%) of the area of the concentration triangle is occupied by the homogeneity region of solid solutions with the Tl₅Te₃ structure (δ-phase). Solid solutions based on Tl₂Te (α-phase) form within a narrow region. The regions of the α- and δ-phases are separated by two-phase region α + δ.     

Interaction in the systems TlBiSe<Subscript>2</Subscript>–Tl<Subscript>9</Subscript>BiSe<Subscript>6</Subscript>–PbSe and Tl<Subscript>9</Subscript>BiSe<Subscript>6</Subscript>–Tl<Subscript>4</Subscript>PbSe<Subscript>3</Subscript>–PbSe

Phase equilibria in the systems TlBiSe₂–Tl₉BiSe₆–PbSe and Tl₉BiSe₆–Tl₄PbSe₃–PbSe were studied by differential thermal, X-ray powder diffraction, and microstructural analyses. State diagrams of the quasi-binary sections Tl₉BiSe₆–Tl₄PbSe₃, TlBiSe₂–PbSe, and Tl₉BiSe₆–PbSe were constructed, and so were projections of liquidus surfaces and isothermal sections at 600 K for the secondary quasi-ternary systems TlBiSe₂–Tl₉BiSe₆–PbSe and Tl₄PbSe₃–Tl₉BiSe₆–PbSe. The coordinates of invariant points and the boundaries of solid solutions were determined.     

Phase Equilibria in the System Tl<Subscript>9</Subscript>SbSe<Subscript>6</Subscript>–TlSbSe<Subscript>2</Subscript>–Tl<Subscript>4</Subscript>SnSe<Subscript>4</Subscript>

For the first time, by differential thermal, X-ray powder diffraction, and microstructural analyses, phase equilibria in the ternary system Tl₉SbSe₆–TlSbSe₂–Tl₄SnSe₄ were investigated and the state diagram of the polythermal section Tl₄SnSe₄–Tl₃SbSe₃, the projection of the liquidus surface on the concentration triangle, and the isothermal section at 423 K were constructed. The types and coordinates of invariant processes, the lines of monovariant equilibria, and their temperature ranges were found. The formation mechanism and nature of solid solutions based on ternary compounds Tl₉SbSe₆ and TlSbSe₂ were studied in terms of crystal chemistry.     

Reciprocal system 3Tl<Subscript>2</Subscript>S + Sb<Subscript>2</Subscript>Se<Subscript>3</Subscript> ⇆ 3Tl<Subscript>2</Subscript>Se + Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>

Phase equilibria in the reciprocal system 3Tl₂S + Sb₂Se₃ ? 3Tl₂Se + Sb₂S₃ are investigated by DTA, X-ray powder diffraction, and emf measurements. Some polythermal sections, the isothermal section of the phase diagram at 400K, and the liquidus-surface projection for this system are constructed. The types and coordinates of invariant and univariant equilibria are determined. It is shown that the system is non-diagonal. Broad regions of solid solutions are found on the basis of the binary compounds Tl₂S and Tl₂Se and along the boundary system Sb₂S₃-Sb₂Se₃ and the sections Tl₃SbS₃-Tl₃SbSe₃, TlSbS₂-TlSbSe₂, and TlSb₃S₅-TlSb₃Se₅ of the phase diagram.     

Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).     

A New Sandwich Polyoxometalate Constructed from a Zn<Stack><Subscript>6</Subscript><Superscript>12+</Superscript></Stack> Hexagon Cluster Sandwiched by Two B-α-[BiW<Subscript>9</Subscript>O<Subscript>33</Subscript>]<Superscript>9−</Superscript>

A new sandwich polyoxometalate Na₄Zn₂[Zn₂(H₂O)₁₀(ZnCl)₆(B-α- BiW₉O₃₃)₂] · 40.5H₂O (1) has been obtained in aqueous solution and characterized by IR, UV, element analysis, TG and single-crystal X-ray analysis. Polyoxoanion 1 is composed of a Zn ₆ ¹²⁺ hexagon sandwiched by two [BiW₉O₃₃]^9? units, which is firstly observed in tungstobismutate. The crystal data for compound 1: Triclinic, space group P–1, a = 15.426(3) Å, b = 15.467(3) Å, c = 15.526(3) Å, α = 74.24(3)°, β = 64.37(3)°, γ = 60.73(3)°, V = 2905.3(1) ų, Z = 1.     

Interaction of [В<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Superscript>2–</Superscript> and [В<Subscript>12</Subscript>H<Subscript>12</Subscript>]<Superscript>2–</Superscript> with nitro compounds

The interaction of the [B₁₀H₁₀]^2– and [B₁₂H₁₂]^2– anions with aliphatic and aromatic nitro compounds (RNO₂, where R = Et, n-Pr, i-Pr, tert-Bu, Ph) has been studied under irradiation with visible and UV light. It has been shown that, depending on the reaction conditions, both mono- and disubstituted nitro-closo-decaborates can be selectively obtained in yields up to 50%.     

Reaction of the [B<Subscript>10</Subscript>H<Subscript>9</Subscript>O<Subscript>2</Subscript>C<Subscript>4</Subscript>H<Subscript>8</Subscript>]<Superscript>–</Superscript> anion with C-nucleophiles

The reactions of 1,4-dioxane-substituted closo-decaborate anion ([B₁₀H₉O₂C₄H₈]^–) with metal acetylenides, diethyl malonate, ethyl acetoacetate, triethyl orthoformate, acetylacetone, and malonodinitrile were studied. The reactions were shown to be accompanied with substituent ring opening and attachment of the corresponding pendant functional group. The obtained compounds were characterized by various physicochemical methods (IR and polynuclear NMR spectroscopy, ESI mass spectrometry).     

Synthesis and Structure of the bismuth complex [Ph<Subscript>3</Subscript>PrP]<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>[Bi<Subscript>4</Subscript>I<Subscript>16</Subscript>]<Superscript>4−</Superscript>

The complex [Ph₃P] ₄ ⁺ [Bi₄I₁₆]^4? · 2 Me₂C=O (I) was synthesized by the reaction of triphenyl(propyl)phosphonium iodide with bismuth iodide in acetone. The crystal structure of complex I was determined by X-ray crystallography. It contains, in addition to solvent molecules, two types of crystallographically independent tetrahedral tetraphenyl(propyl)phosphonium cations and tetranuclear anions [Bi₄I₁₆]^4? in a chair conformation with the bismuth atoms being in an octahedral coordination. The Bi-I distances in the anion vary within 2.8768(4)–3.2524(4) Å.     

Nucleophilic addition of aromatic amide oximes to [2-B<Subscript>10</Subscript>H<Subscript>9</Subscript>NCC<Subscript>2</Subscript>H<Subscript>5</Subscript>]<Superscript>–</Superscript> anion

A series of closo-decaborate anions containing an O-iminoacylamide oxime fragment were synthesized by nucleophilic addition of aromatic amide oximes to 2-propionitrilium closo-decaborate anion. The isolated compounds were characterized by IR, ¹H, ¹³C–{¹H}, and ¹¹B–{¹H} NMR, and mass spectra. The structure of (Ph₄P)[2-B₁₀H₉NH=C(Et)ON=C(NH₂)C₆H₄Me-2] was determined by single-crystal X-ray analysis.     

Photochemical arene exchange in the naphthalene complex [CpRu(η<Superscript>6</Superscript>-C <Subscript>10</Subscript>H<Subscript>8</Subscript>)]<Superscript>+</Superscript>

The cation [CpRu(η⁶-C₁₀H₈)]⁺ was shown to exchange naphthalene for other arenes under visible-light irradiation to form the complexes [CpRu (η⁶-arene)]⁺ (arene = C₆H₆, 1,4-C₆H₄Me₂, 1,3,5-C₆H₃Me₃, or 1,2,4,5-C ₆H₂Me₄) in 70–95% yields. The reaction rate of exchange decreases in the series arene = 1,4-C₆H₄Me₂ > C₆H₆ > 1,3,5-C₆H₃Me₃ > 1,2,4,5-C ₆H₂Me₄ >> C₆Me₆ and increases with the coordinating ability of the solvent in the order CH₂Cl₂ < THF—CH₂Cl₂ mixture (1: 1) < acetone.     

Structure,physicochemical properties,and reactivity of the [B<Subscript>9</Subscript>H<Subscript>9</Subscript>]<Superscript>2–</Superscript> anion

Data on the structure, properties, and reactivity of one of the least studied 3D aromatic clusters—nonahydro-closo-nonaborate anion [B₉H₉]^2–—have been systematized. It has been shown that the key aspects of its reactivity are related to structural flexibility, which essentially distinguishes the [B₉H₉]^2– anion from the higher representatives of closo-borate anions.     

Structural investigation of salts containing ions [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>]<Superscript>2+</Superscript> and [IrF<Subscript>6</Subscript>]<Superscript>2–</Superscript>

Double complex salts (DCS) α-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/m, a = 6.3181(3) Å, b = 10.8718(5) Å, с = 7.4526(4) Å, β = 103.568(2)°), β-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/с, a = 8.5773(3) Å, b = 10.8791(4) Å, с = = 12.6741(3) Å, β = 122.497(2)°), [Pd(NH₃)₄]₃[IrF₆]₂Cl₂·H₂O (P-1, a = 7.6080(2) Å, b = 7.6274(2) Å, с = 11.8070(3) Å, β = 122.497(2)°), and [Pd(NH₃)₄]₂[IrF₆]NO₃ (Fm-3m, a = 11.21210(10) Å) have been synthesized and structurally characterized for the first time. The existence of polymorphs for the DCS has been revealed. The influence of the chemical composition of the initial reagents on the reaction course and, respectively, the products, has been demonstrated. A hypothesis on the influence of the second coordination sphere on the formation of one or the other polymorph of the DCS has been suggested. It has been shown that the series α-[Pd(NH₃)₄][МF₆]·H₂O (M = Pt, Pd) exhibits isostructurality.     

Invar<Superscript>®</Superscript> oxidation in CO<Subscript>2</Subscript>

In this article, corrosion of Invar^® in a static carbon dioxide atmosphere \( 2\times 1 0^{4} \le P_{{{\text{CO}}_{ 2} }} \le 10^{5} \,{\text{Pa}} \) has been studied between 1163 and 1263 K. At the beginning, after a short initial deceleration for weight gains Δm/S <0.5 mg cm^?2, oxidation kinetics were linear up to weight gains of about 4.0 mg cm^?2, and only wüstite Fe_1?x O was formed with a constant rate r (mg cm^?2 s^?1) \( r = \frac{{{\text{d}}\left( {\frac{\Updelta m}{S}} \right)}}{{{\text{d}}t}} = 0.41 \times P_{{{\text{CO}}_{ 2} }} \exp \left( {\frac{ - 198000}{RT}} \right) \) where R is the gas constant and t the time (s). Reaction mechanism is similar to that of the pure iron in analogous conditions, with the same rate limiting step i.e. external reaction of CO₂ with wüstite and outward diffusion of ions Fe²⁺ (not limiting). For weight gains Δm/S higher than 4 mg cm^?2, the limiting step changes, with an increase of the reaction rate and an internal oxidation. The origin of this mechanism change lies in the microcracks appearing in the oxide during its growth. Then, wüstite is no longer bound to the substrate; outward diffusion of ions Fe²⁺ stops and a topotactic transformation converts wüstite into magnetite.     

Interactions between AuCl<Subscript>4</Subscript><Superscript>−</Superscript> and CTA<Superscript>+</Superscript> ions in water

The solubility of hexadecyltrimethylammonium tetrachloroaurate (CTA·AuCl₄) in water was measured at different temperatures of 288.2, 293.2, 298.2, 303.2, and 308.2 K. The enthalpy change associated with the formation of the CTA·AuCl₄ precipitate was estimated on the basis of the van’t Hoff equation and was found to be −42.5 ± 2.8 kJ mol⁻¹ at 298.2 K. The calorimetric enthalpy change for the CTA·AuCl₄ precipitate formation was directly determined by isothermal titration calorimetry performed at 298.2 K and was found to agree well with that estimated from the van’t Hoff equation.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Influence of ion size on the stability of chloroplumbates containing PbCl<Stack><Subscript>5</Subscript><Superscript>−</Superscript></Stack> or PbCl<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack>

The enthalpies of formation of PbCl₄, PbCl₅⁻ and PbCl₆²⁻, originating from quantum mechanics, have enabled the thermodynamic behaviour of these ions with respect to Cl-detachment to be assessed. The stability of salts containing PbCl₅⁻ and PbCl₆²⁻ as a function of the dimensions of these anions and complementary cations was studied using an approach combining the Kapustinskii-Yatsimirskii equation with basic thermochemical relationships. It was found that hexachloroplumbates of monovalent metal cations will not dissociate into metal chlorides and PbCl₄, provided the complementary cations are suitably large in size. Hexachloroplumbates of divalent metal cations have not yet been synthesised since no known metal cations attain the requisite large size. Such salts will not dissociate if the divalent metal cations are able to complex suitably large electron-donating ligands. The pentachloroplumbates of both monovalent and divalent metal cations are unstable, since no known metal cations have appropriately large ionic radii. The approach adopted appears to be useful for the examination of the thermal behaviour, stability and reactivity of chloroplumbates.     

Structures of the complex ions [CuCl<Subscript>4</Subscript>]<Superscript>2−</Superscript> and [CuCl<Subscript>5</Subscript>]<Superscript>3−</Superscript>

The electronic structures of the complex ions [CuCl₄]^2? and [CuCl₅]^3? were analyzed in terms of the extended angular overlap model (AOM) with consideration to sd and pd mixing. The total antibonding orbital energies of these ions show no anomalies in the transition from a tetrahedron to a planar square [CuCl₄]^2? and from a trigonal bipyramid to a tetragonal pyramid [CuCl₅]^3?. Presumably, the existence of numerous intermediate forms of these complexes is mainly due to the packing effects rather than the electronic factors.     

Thermal arene exchange in the naphthalene complex [CpRu(η<Superscript>6</Superscript>-C<Subscript>10</Subscript>H<Subscript>8</Subscript>)]<Superscript>+</Superscript>

Naphthalene in the [CpRu(⁶−C₁₀H₈)]⁺ complex (1) is substituted for other arenes under reflux in 1,2-dichloroethane to form the [CpRu(⁶-arene)]⁺ cations (arene = C₆H₆, 1,2-C₆H₄Me₂, 1,2,4,5-C₆H₂Me₄, or C₆Me₆) in 70–80% yields. The reaction is accelerated in the presence of a catalytic amount of acetonitrile. The structure of [1]PF₆ was established by X-ray diffraction.